Post on 18-Apr-2018
Subject to change without notice.[Ed : 07/b] Copyright ©2008
Printed in Japan, 810(KP)
• Ethernet is a registered trademark of Xerox Corporation.• Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.
LF04L01L01-07E
... and subscribe to “Newswave”, our free e-mail newsletter
Recorder & Controller
Digest Vol. 7
With unparalleled measurement, display, and connectivity functions, the new DXAdvanced provides all-in-one data measurement, visualization and historian functions with no programming or costly integration.
With unparalleled measurement, display, and connectivity functions, the new DXAdvanced provides all-in-one data measurement, visualization and historian functions with no programming or costly integration.
- Simultaneous multiple-batch data storage!- Simultaneous multiple-batch data storage!
- Arrange the display your way with a custom display function!- Displays and prints reports from a web browsing!- Review historical data with date and time calendar search functions!
- Arrange the display your way with a custom display function!- Displays and prints reports from a web browsing!- Review historical data with date and time calendar search functions!
- Supports for the PROFIBUS-DP and EtherNet/IP protocols!- Supports for the PROFIBUS-DP and EtherNet/IP protocols!
DAQSTATION reaches a new dimensionDAQSTATION reaches a new dimension
Introducing
NEW!NEW!
NEW!NEW!
NEW!NEW!
NEW!NEW!
NEW!NEW!
Record pre-defined channel groups to separate data files with independent start and stop control.
CH1-CH5
CH6-CH12
CH13-CH15
CH1-CH5
CH6-CH12
CH13-CH15
Trig
Freely arrange elements of trends, bar graphs, and other screen components.You can add bitmap images to make overview monitors more intuitive.
Web browsing Web browsingDisplay detailed alarm information from each channel by degree of importance. Easily search for and browse data stored in
DXAdvanced by date/time over the Web.Displays selected report channels and prints reports from a Web browsing.
Supports the PROFIBUS-DP slave and EtherNet / IP server functions. You can load or write measured data from DXAdvanced using a PLC or other master (client) device.
Multi-batch functionMulti-batch function
Custom display functionCustom display function
Alarm annunciator displayAlarm annunciator display Search for Data by Date and timeSearch for Data by Date and time Reports over the webReports over the web
PROFIBUS-DP and EtherNet / IP functionsPROFIBUS-DP and EtherNet / IP functions
Basic characteristics
DX1000DX2000
Display & operation
Networking
Equipment 1
Equipment 2
Equipment 3
Batch 1 Batch 1
Batch2
Batch3
PLC or other PROFIBUS-DPmaster devices can access DXAdvanced devices -Load measurement and Math channels -Write to communication input channels
You can access DXAdvanced fromPLCs or other devices -Load measurement and Math channels -Write to communication input channels
PROFIBUS-DP
PLC PLC
Ethernet
MW100
Device
EtherNet/IPPROFIBUS-DP
YOKOGAWA ELECTRIC CORPORATIONNetwork Solutions Business Div./Phone: (81)-422-52-7179, Fax: (81)-422-52-6619E-mail: ns@cs.jp.yokogawa.com
YOKOGAWA CORPORATION OF AMERICA Phone: 800-888-6400, Fax: (1)-770-254-0928YOKOGAWA EUROPE B.V. Phone: (31)-33-4641806, Fax: (31)-33-4641807YOKOGAWA ENGINEERING ASIA PTE. LTD. Phone: (65)-62419933, Fax: (65)-62412606 www.yokogawa.com/ns
For more details, please refer to General specification or Bulletin.
µR10000Pen: 1 to 4 ch Dot: 6 ch
µR20000Pen: 1 to 4 ch Dot: 6 /12 /18 /24 ch
Optional functions
Application software
Latest Model Latest Model of Paper Recorders!! of Paper Recorders!! Latest Model of Paper Recorders!!
µR10000, µR20000
Remote Control
5 DI for remote control(start/stop, message, etc)
µR10000, µR20000
-Command response-Modbus RTU
RS-422A/485
µR10000, µR20000
Ready for network integration
Ethernet
µR10000, µR20000
Isolated three-wired RTD (for dot model)
3 Legs IsolatedRTD
µR10000, µR20000
Max 24math channels
MathematicalFunctions
µR10000, µR20000
-Cu10, Cu25 RTD-14 types sensors (Pt 50, PR40-20, etc)
Cu10, Cu25 RTDExpansion Inputs
Application software
UT, UP, US, JUXTA*
* : VJH7, CVJP8, CVJQ7, CVJQ8, CVJS7, CVJU7, CVJX7
Communication driver to DAQLOGGER
MathematicalFunctions
YS1700Programmable indicating controller
YS1500Indicating controller
YS1310Indicator with alarm
YS1350Manual setter for SV setting
YS1360Manual setter for MV setting
High precision±0.25%
Temperature ControllerBasic Rich
- Active color display
Supplies power to2-wire transmitter.
Signal Conditioner Signal Conditioner Signal Conditioner Power andPower andEnerEnergy Meter gy Meter Power andEnergy Meter
AR Series LightningAR Series LightningArrestorArrestorAR Series LightningArrestor
VJ Series- Compact- DIN rail mount- Modbus communication- Alarm Output
VJETEthenet/RS-485converter
- Parameter setting- Function block programming with debugging function- Text base programming
AR SeriesAR Series
AR2 series
AR2-ET for10BASE-T/ 100BASE-TX
AR2-E2 for10BASE-2
AR2-E5 for10BASE-5
AR2-R4 forRS-485
DR230Stand-alone10/20/30 ch: 2 s Expandable10 to 300 ch: 500 ms
Data Acquisition and Recording Windows
DA100Stand-alone10/20/30/40 ch: 500 msExpandable 10 to 300 ch: 500 ms
DR240Stand-alone10/20/30 ch: 2 s Expandable10 to 300 ch: 500 ms
DAQ32Plus
DAQLOGGER
DA100, DC100,DR130, DR230, DR240
DAQ32Plusclient
DAQ32Plus
Application software
MW100
MXLOGGER, DAQLOGGER
MXLOGGER
MX100 MX100, MW100
Application software
MX100
-Command response-Modbus RTU
Program Control
-Max. 30 program patterns-300 segments
DXAdvanced, DX-P, CX
DXAlarm
Output
Optional functionsMW100- Max. 10 ms measurement interval- Max.1200 channels on MXLOGGER- High-withstand-voltage: 3700 Vrms, 600 Vrms/V DC- Multi-interval: 3 measurement intervals available
MX100
DCV/TC/RTD/DI4 ch:10 ms
DCV/TC/RTD/DI10 ch:100 ms
Contact DI10 ch:10 ms
Strain 3504 ch:100 ms
Strain NDIS4 ch:100 ms
24V DI10 ch:10 ms
DA100, DC100,DR130, DR230, DR240
DR231
Useful for carrying
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
DA100, DC100,DR130, DR230, DR240
Optional functions
MW100
DXAdvanced, DX-P
Calibration Correction Function
DXAdvancedDXAdvanced, DX-P, CX CX
-Real time monitoring-File transfer (Auto/man)
DXAdvanced, CX
DemandMeasurement
1 demand alarm output
PR300
24 V DCTransmitterPower Supply
DXAdvanced, DX-P, CX
MathematicalFunctions
DA100, DC100,DR130, DR230, DR240
Input modules
Output modules
A-contact DO10 ch:100 ms
PWM8 ch:100 ms
AO(DCV/DCA)8 ch:100 ms
(M3 size) (M4 size)
DX20004/8 ch:25 msec10/20/30/40/48 ch:125 msec
DX10002/4 ch:25 msec6/12 ch:125 msec
DX200P4/8 ch:125 msec10/20/30 ch:1 sec
DX100P2/4 ch:125 msec6/12 ch:1 sec
CX1000up to 2 loops / 6 ch
/S50(many heat treatment applications available : Carburizing and vacuum furnace by CP computation, Log scale display etc)
CX2000up to 6 loops / up to 20 ch
Compliant
with FDA 21 CFR Part 11
Universal Input
mA Input
Power Monitor
Strain Input
Pulse Input
Alarm Output
Ethernet Interface
Digital Indicating ContrDigital Indicating ControllerollerDigital Indicating Controller
High reliabilitybased onyears of expertise
High reliabilitybased onyears of expertise
Single Loop ControllerSingle Loop Controller
USB
DXAdvanced, DX-P, CX
Panel cut size: DIN standards
Ethernet
RS485
USBDedicated
cable
UT351/UT551
Click
- Max. 10 ms measurement interval- Max. 360 channels- High-withstand-voltage: 3700 Vrms, 600 Vrms/V DC- Multi-interval: 3 measurement intervals available- Secure, Compact Flash media archives data with automatic FTP server backup- Standard 10/100 Base T Ethernet with MODBUS TCP, EtherNet/IP, WITS and DNP3
Client monitoringsoftware
Save data inboth PC and CF
CompactFlash (CF) memory
-Data logging & monitoring software -20 MX100 max-1200 ch max
Communication driver to DAQLOGGER
ReportFunction
Alarm Carrying Handle RS-232-C
Remote Control
Ethernet GP-IB
Power Supplyfor 24-V Transmitters
4-wire RTD/DCV/DI/6 ch:100 ms
Strain 1204 ch:100 ms
Shunt resistor embedded (10 , 100 , 250 )
See backpage for
new functionsSee backpage for
new functions
60 math channels
24 points max.
16 point linearizer 8 loops max.
Remote Control
8 DI for remote control(start/stop, message, etc)
DXAdvanced, DX-P, CX
DXAdvanced, DX-P, CX
-USB memory-USB ASCII keyboard(US)
60 math channels
RS-232,RS-422A/485
Dual Save Function
-Command response-Modbus RTU
Optional TOptional Terminal Blockserminal BlocksOptional TOptional Terminal Blockserminal BlocksOptional Terminal Blocks
MX/MW's Input/Output Module Lineup
Screw terminal (M3/M4)
-Data logging & monitoring software-Integrates 32 devices*-1600 ch max *Yokogawa recorders & controllers
-Data logging & monitoring-300 ch max.
-Command response-Modbus RTU**Please ask sales person
Ready for network integration
Command responseClient monitoringsoftware
300 points max(expandable)
Command response
60 math channels Hourly, daily, ormonthly report
DI for remote control(start/stop, message, etc)
RXA10
µR10000, µR20000
Online/offlineparameter setting
µR10000, µR20000
Communication driverto DAQLOGGER
Gate R
YS1000
RS-485 DCS-LCScommunication
Ethernet
PC-links Modbus-RTU,and YS protocol.
Modbus/TCP
YS1000
DCS Communication
YS1000
Optional functions
Optional functions
Optional functions
Application software
- Large triple display- Multi-meter function (integrates Wh,W,PF,Hz,V,&A )- Universal shape for installation (DIN,ANSI,JIS)- RS485 communication (Standard)
Ethernet
PR300
Ready for network integration
Program ControllerBasic Rich
UT300 series (4-digit display)
UT400 series (5-digit display)
UT500 series (5-digit display)
UT700 series (5-digit display)
UP300 series (4-digit display)
Outstanding
US1000
UP500 series (5-digit display)
UP700 series (5-digit display)
- Remote set point
- Active color display - Remote set point- Cascade control
- Bar graph display- Custom computation- Feed forward
Compact & simple
UT100 series
- Custom computation- Dual loops- 2 comm. ports
- Active color display (UT551)- Ethernet (UT551)- Cascade control
- Custom computation- Dual loops- 2 comm. ports
30patterns
300patterns
2patterns
1patterns
UT130/UT150
UP150
MW100
CF for Industrial Use
GB
-128 MB to 1 GB-Durable & reliable
RS-232RS-422A/485
MathematicalFunctions
RS422/485
Alarm Outputs
Alarm Alarm Outputs
Supports PROFIBUS-DPprotocol
Optional functions
DXAdvanced
DXAdvanced
Start/stop recording by up to 12 batches
PROFIBUS-DP
Multi-batch
µR10000, µR20000
24 points max
Alarm Alarm Outputs
-Data logging & monitoring software-Integrates 32 devices*-1600 ch max *Yokogawa recorders & controllers
UT3 1, UT450, UT551
DAQLOGGERClient
GateMX/MW
GateControl
PR300
Communication driver to DAQLOGGER
GateMODBUS
YS1000
Application software
Communication driver to DAQLOGGER
GateMODBUS
Application software
DAQLOGGER
DAQEXPLORER
(72 144mm)
Web-Enabled Data Aquisition/ Stand-Alone Data Logging System
PC-Based RealTime Data Logging System
Web-Enabled Data Aquisition/ Stand-Alone Data Logging System
PC-Based RealTime Data Logging System
Custom display function and Custom display function and EtherNet/IP prEtherNet/IP protocol communication otocol communication are standard functions.are standard functions.
Custom display function and EtherNet/IP protocol communication are standard functions.
Control and
Measurement Station
DX3644ch model, 72x144 panel cut size
Special
panel cut size
DXAdvanced
DX1000NRemovable Chassis Model of DX1000
Pulse10ch:100 ms
DCV/TC/DI30ch:500 ms
- Shunt resistor (100 Ω) embedded- 10 ch : 500 ms
- Static strain measurement- Bridge resistor embedded- 10 ch : 500 ms
- A contact : 10 ch- SPDT : 4 ch
- DCV, TC, RTD, DI- 10 ch : 500 ms- 20 ch : 2 s (2 slots width) - 30 ch : 2 s (3 slots width)
- Single phase or 3 phases- 500 ms
- Non-voltage contact or open collector- 10 ch : 500 ms
MW100
-60 report channels-Hourly, daily, weekly, monthly report
ReportFunction
Ready Ready to Run!to Run!Ready Ready to Run!to Run!Ready to Run!
Quick Start SystemQuick Start System
MX100MW100MX100MW100
10 /20 /30 channel modelchannel model10 /20 /30
channel model
Flow computationmodel
Flow computationmodel
Flow computationmodel
Flow computationmodel
- Runs up to ten A- Runs up to ten AGA3 and AGA8 GA8 gas calculations - Compensated steam flo- Compensated steam flow- FM-approved for Class 1, Division 2 areas Division 2 areas
- Runs up to ten AGA3 and AGA8 gas calculations - Compensated steam flow- FM-approved for Class 1, Division 2 areas
(MW100)
Subject to change without notice.[Ed : 07/b] Copyright ©2008
Printed in Japan, 810(KP)
• Ethernet is a registered trademark of Xerox Corporation.• Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.
LF04L01L01-07E
... and subscribe to “Newswave”, our free e-mail newsletter
Recorder & Controller
Digest Vol. 7
With unparalleled measurement, display, and connectivity functions, the new DXAdvanced provides all-in-one data measurement, visualization and historian functions with no programming or costly integration.
With unparalleled measurement, display, and connectivity functions, the new DXAdvanced provides all-in-one data measurement, visualization and historian functions with no programming or costly integration.
- Simultaneous multiple-batch data storage!- Simultaneous multiple-batch data storage!
- Arrange the display your way with a custom display function!- Displays and prints reports from a web browsing!- Review historical data with date and time calendar search functions!
- Arrange the display your way with a custom display function!- Displays and prints reports from a web browsing!- Review historical data with date and time calendar search functions!
- Supports for the PROFIBUS-DP and EtherNet/IP protocols!- Supports for the PROFIBUS-DP and EtherNet/IP protocols!
DAQSTATION reaches a new dimensionDAQSTATION reaches a new dimension
Introducing
NEW!NEW!
NEW!NEW!
NEW!NEW!
NEW!NEW!
NEW!NEW!
Record pre-defined channel groups to separate data files with independent start and stop control.
CH1-CH5
CH6-CH12
CH13-CH15
CH1-CH5
CH6-CH12
CH13-CH15
Trig
Freely arrange elements of trends, bar graphs, and other screen components.You can add bitmap images to make overview monitors more intuitive.
Web browsing Web browsingDisplay detailed alarm information from each channel by degree of importance. Easily search for and browse data stored in
DXAdvanced by date/time over the Web.Displays selected report channels and prints reports from a Web browsing.
Supports the PROFIBUS-DP slave and EtherNet / IP server functions. You can load or write measured data from DXAdvanced using a PLC or other master (client) device.
Multi-batch functionMulti-batch function
Custom display functionCustom display function
Alarm annunciator displayAlarm annunciator display Search for Data by Date and timeSearch for Data by Date and time Reports over the webReports over the web
PROFIBUS-DP and EtherNet / IP functionsPROFIBUS-DP and EtherNet / IP functions
Basic characteristics
DX1000DX2000
Display & operation
Networking
Equipment 1
Equipment 2
Equipment 3
Batch 1 Batch 1
Batch2
Batch3
PLC or other PROFIBUS-DPmaster devices can access DXAdvanced devices -Load measurement and Math channels -Write to communication input channels
You can access DXAdvanced fromPLCs or other devices -Load measurement and Math channels -Write to communication input channels
PROFIBUS-DP
PLC PLC
Ethernet
MW100
Device
EtherNet/IPPROFIBUS-DP
YOKOGAWA ELECTRIC CORPORATIONNetwork Solutions Business Div./Phone: (81)-422-52-7179, Fax: (81)-422-52-6619E-mail: ns@cs.jp.yokogawa.com
YOKOGAWA CORPORATION OF AMERICA Phone: 800-888-6400, Fax: (1)-770-254-0928YOKOGAWA EUROPE B.V. Phone: (31)-33-4641806, Fax: (31)-33-4641807YOKOGAWA ENGINEERING ASIA PTE. LTD. Phone: (65)-62419933, Fax: (65)-62412606 www.yokogawa.com/ns