Post on 02-Jun-2018
8/11/2019 Drilling 024 (1)
1/19
Drilling Process This is the operation of making a circular hole by removing a
volume of metal from the workpiece by a rotating cutting toolcalled drill.
Drilling removes solid metal from the work piece to produce a
circular hole.
Before drilling, the hole is located by drawing two lines at rightangle and a center punch is used to make an indentation for the
drill point at the center to help the drill in getting started.
A suitable drill is held in the drill machine and the drill machine is
adjusted to operate at the correct cutting speed.
The rotating drill is made to feed into the workpiece .
8/11/2019 Drilling 024 (1)
2/19
Boring Process This operation is carried out using cutting tools with only one
cutting edge, where enlarging a hole by means of adjustable isaccomplished.
A boring tool is employed using turning machine.
8/11/2019 Drilling 024 (1)
3/19
A twist drill has three
principal parts:
(i ) Dri l l point or dead center
(i i ) Body
(ii i) Shank
Drills are made of high
speed steel. High speedsteel is used for about 90
per cent of all twist drills.
For metals more difficult
to cut, HSS alloys of highcobalt series are used.
Twist Drill
8/11/2019 Drilling 024 (1)
4/19
Drilling Machines
1. Base
2. Pillar
3. Worktable
4. Motor5. Hand wheel
6. Quill
7. Spindle
8. Depth stop
9. Stop/start
10. Drill guard
8/11/2019 Drilling 024 (1)
5/19
Drilling Machine
8/11/2019 Drilling 024 (1)
6/19
Drilling Machines
Radial DrillUpright Drill
Bench Drill
8/11/2019 Drilling 024 (1)
7/19
Drilling Machines
Upright Drill:
It is a heavy duty type of drilling machine normallyincorporating a geared drive spindle head. Thistype of drilling machine is used on large hole-producing operations that typically involve largeror heavier parts.
The upright drill allows the operator to hand feedor power feed the tool into the workpiece.
The power feed mechanism automatically advancesthe tool into the workpiece.
Some types of upright drill are also manufacturedwith automatic table-raising mechanisms.
8/11/2019 Drilling 024 (1)
8/19
Drilling Machines
8/11/2019 Drilling 024 (1)
9/19
Drilling Machines
8/11/2019 Drilling 024 (1)
10/19
Drilling MachinesRadial Drill:
It allows the operator to position the spindle directlyover the workpiece rather than move the workpiece tothe tool.
The design of the radial drill press gives it a great deal
of versatility, especially on parts too large to positioneasily.
Radial drills offer power feed on the spindle, as well asan automatic mechanism to raise or lower the radialarm.
The wheel head, which is located on the radial arm canalso be traversed along the arm, giving the machineadded ease of use as well as versatility. Radial arm drill
presses can be equipped with a tilting table.
8/11/2019 Drilling 024 (1)
11/19
Types of Twist Drill
8/11/2019 Drilling 024 (1)
12/19
Tool holding
Drill chuck
Safety chuck key
Drift in drill spindle
8/11/2019 Drilling 024 (1)
13/19
Removing a drill from drill machine
8/11/2019 Drilling 024 (1)
14/19
For large diameters a 'hole saw' can be used. The advantage
of this type of drill bit is that the blade can be changed to
give different sizes of diameter.
Hole Saw
8/11/2019 Drilling 024 (1)
15/19
Reaming Process Reaming is performed by means of a cutting tool called reamer
Reaming operation is performed by means of a multitooth toolcalled reamer. Reamer possesses several cutting edges on outer
periphery
This process serves to make the hole smooth, straight and accurate
in diameter..
8/11/2019 Drilling 024 (1)
16/19
Other operations Counter Boring: is the operation of enlarging the end of a hole
cylindrically, as for the recess for a counter-sunk rivet.
Counter sinking:This is the operation of making a cone shaped
enlargement of the end of a hole. This is done for providing a seat
for flat headed
Tapping Counter boring Counter sinking
8/11/2019 Drilling 024 (1)
17/19
Shaper
Principal components of a shaper
Shaper is a reciprocating type of machine tool in which the ram
moves the cutting tool backwards and forwards in a straight line.
The basic components of shaper are shown below.
8/11/2019 Drilling 024 (1)
18/19
Shaper
8/11/2019 Drilling 024 (1)
19/19