Post on 14-Feb-2022
www.simx.co.nz
DOMESTIC FAN CATALOGUE
TABLE OF CONTENTSFANS
Extraction Selection 5
Vent-Axia Lo Carbon Wall/Ceiling Mounted Fans 11
Manrose Pro-Series Wall/Ceiling Mounted Fans 12
Manrose Classic Wall/Ceiling Mounted Fans 14
Manrose Classic Thru Wall Fan Kits 16
Simx WhisperVent Centrifugal Ceiling Fans 18
Manrose Classic Multi-Vent Fans 20
Manrose Classic Wall Fans 20
Manrose Pro-Series Thru Wall Mounted Fan Kits 22
Manrose Classic Thru Wall Mounted Fan Kits 24
Manrose Classic Window Mounted Fans 26
Manrose Classic Window Commercial Fans 28
Manrose Designer Series LED Heat/Fan/Light Kits 30
Manrose Designer Series Heater Fan Lights 32
Manrose Pro-Series Heat/Fan/Light Kits 34
Manrose Classic Heat/Fan/Light Kits 34
Manrose Classic Heat/Light Kits 34
MixFlo Pro-Series Inline Fan Kits 36
Manrose Pro-Series Inline Mounted Fan Kits 38
Manrose Classic Inline Mounted Fan Kits 40
Manrose Pro Series Inline Fan/Light Kits 42
Manrose Classic Inline Fan/Light Kits 44
MixFlo Pro-Series Inline Mixed Flow Fans 46
Manrose Classic Inline Hyper Fan 48
Manrose Classic Inline Axial Fans 50
Eco Inline Axial Fans 50
Manrose Classic Inline Centrifugal Fans 52
Simx Inline Centrifugal 3 Speed Fans 53
Simx Inline Centrifugal Fans 54
Simx WhisperVent inline Centrifugal Fans 56
BAP Plate Mounted Axial Extract Fans 58
BRC-Q Roof Mounted Centrifugal Extract 60
BRA Roof Mounted Axial Fan Side Discharge 62
BRM-Q Roof Mounted Centrifugal Extract Fan Vertical 64
K-Series Inline Centrifugal Fans 66
Vent-Axia Inline Mixed Flow Fans 68
Simx External Wall Mounted Fans 70
Thru-Roof Mounted Fans 72
Thru-Roof Mounted Fans 74
Manrose Classic Hand Dryers 76
High Speed Dryers 78
Hand Dryers 78
Specialised Fans 80
Fan Timers 81
Electronic Transformers 81
Isolating Transformers 81
Thermostats 82
Humidistat Controller 82
Speed Controllers 82
Fan Mounting Brackets 82
Kitchens
The regulations require a fan capable
of a minimum extraction capacity of 50
litres per second when installed.
Laundries
The regulations require a fan capable
of a minimum extraction capacity of 20
litres per second when installed.
Bathrooms
The regulations require a fan capable
of a minimum extraction capacity of
25 litres per second when installed.
Toilets
The regulations require a fan capable
of a minimum extraction capacity of
25 litres per second when installed.
EXTRACTION SELECTIONFAN REGULATIONS
INDUSTRY RECOMMENDATIONS
• The mentioned flow rates below are minimum
allowable. In general these would not be enough
to overcome excessive moisture and condensation
problems encountered in modern homes.
• The ventilation industry has a “Recommended Air-
Changes per Hour” approach solution. i.e. An air fl ow
rate suffi cient to remove/replace the total volume of air
in a given room a specifi ed number of times each hour.
• Obviously fans will not necessarily be left running for
an hour - a fact which is taken into consideration in
the formula.
Example:
A bathroom is recommended at between 11 & 15
air-changes per hour. Therefore 15 changes per hour
means the total air in the room would be replaced after
4 minutes.
e.g. (60 minutes @ 15 changes per hour = 4 minutes).
This would mean an average bathroom usage of 12 - 16
minutes resulting in the total air volume being changed
3 to 4 times. This equates to a rate of 15 ACH.
WHAT THE LAW STATES
New Zealand Building Code G4 Ventilation
(summarised):
“Buildings shall have a means of collecting or otherwise
removing: cooking fumes and odours; steam from
laundering, utensil washing, bathing and showering;
odours from sanitary and waste storage spaces;
poisonous or fl ammable fumes and gases”.
• Natural Ventilation for the above is acceptable as long
as opening windows in each room have an area of
5% or more of the fl oor area of the room.
• For internal rooms without natural ventilation,
mechanical ventilation (extraction fans) must be
installed to extract the air at given rates. Residential
requirements are listed below.
• Where fans are used to remove moisture and other
contaminants from kitchens, bathrooms and
laundries in housing, the exhaust air must be ducted
to the outside at the fl ow rates mentioned below.
• The above requirement for ducting also applies to
any fan in those areas, even if there is an opening
window (i.e. even if the fan is not a requirement to
comply with ventilation regulations, but is installed
as an optional extra).
5Simx Limited | www.simx.co.nz | sales@simx.co.nz
Damp air out
Fresh air in
Poor Circulation Medium Circulation
Window Closed
Window Closed
Best Circulation
“Makeup air” is required for the fan to function
effi ciently. This is simply air that replaces the
air that has already been extracted and can be
achieved with a gap under the door (min 5mm)
or a grill in the door, we do not recommend
opening a window.
MANAGING MOISTURE
It is best to remove moisture from where it is generated
to outside the house before it has a chance to spread
to other parts of the house.
Use ducted fans, through-wall fans or window fans at
all times. DO NOT use ceiling fans which discharge
into the ceiling cavity, this only moves the problem.
Moisture will permeate insulation and ceiling linings
causing further problems. In particular with bathrooms
think in terms of “room-conditioning”. Warm, moist
air is immediately attracted to cold surfaces, where it
condenses into water droplets.
Cold surfaces include glass, mirrors, tiles, wet-wall
linings, cold un-insulated ceiling linings, etc.
You cannot remove all of this air at a rate fast enough
to stop this happening and if you could, you would be
standing in a wind tunnel. Use of a bathroom heater to
warm the room prior to use greatly assists in reducing
condensation.
FAN PLACEMENT
Careful location of an extraction fan will ensure
maximum air-fl ow through the room. Air extracted
from a bathroom, for example, can be replaced with dry
air drawn from an adjacent bedroom or hallway, in turn,
drawn from an open window or door.
This ensures that fresh air is being drawn into the entire
house at regular periods. Switching the fan on before
starting showering or cooking sets up effective air-fl ows
before condensation problems occur.
Closing doors to adjacent living areas assists in stopping
the transfer of moisture to those areas but ensure
that suffi cient air can enter under the door to replace
extracted air. Use a door vent if necessary.
For a fan to remove air effectively, the same amount of air
being extracted must be able to enter the room, e.g. air in
= air out. An air-tight room will mean no air movement. If
the room is tightly sealed (e.g. a tight-fi tting door, with no
gap at the bottom), you may need to fi t a through-door grille to
allow replacement air into the room.
6
EXTRACTION SELECTIONYOUR EXTRACTION SOLUTIONS
400
350
300
250
200
150
100
50
0
110
100
90
80
70
60
50
40
30
20
10
240
220
200
180
160
140
120
100
80
60
40
20
m3/hr l/s cfm
Application Description Air Changes Per Hour
Bathrooms 11 - 15
Kitchens - (domestic) 15 - 20
Laundries - (no drier) 6 - 10
Laundries - (with drier) 10 - 30
Toilets 6 - 10
Bedroom 2 - 5
Offices 6 - 10
Cafés 10 - 12
Canteens 8 - 12
Garages 6 - 8
Kitchens - (commercial) 20 - 30
Restaurants 8 - 12
Factories 8 - 10
Stores & Warehouses 3 - 6
Libraries 3 - 5
Classroom 5 - 7
Example:
What is the best fan for a bathroom that is 2.8m long
by 2.8m wide with a ceiling height of 2.4m?
• Calculate the volume of the bathroom:
2.8 x 2.8 x 2.4 = 18.8m3.
• 11-15 air changes per hour are recommended for a
bathroom. Multiply the room volume by 15: 18.8m3
x 15 = 282m3/hr.
• The fan to choose for this bathroom would be a fan
that performs at greater than 282m3/hr.
• A fan that has a performance level of 313m3/hr or
higher (e.g. XP150, or SF150) would do this job.
AIR CHANGES PER HOUR (ACH)
The number of times the total room volume of air is changed
each hour. Refer to the table below for the recommended Air
Changes per hour based on the room type.
WORKING OUT THE RIGHT FAN FOR THE JOB
• Calculate the room volume in metres (L x W x H).
• Multiply the room volume by the recommended air
changes per hour for that room. Always use the
higher limit.
• The result is the total performance required in cubic
metres per hour.
Select a fan with a higher performance than this fi gure.
m³/hr to l/s to cfm
Comparison Chart
Known To Find Action
l/s m³/hr l/s x 3.6 =m³/hr
m³/hr l/s m³/hr ÷ 3.6 = l/s
cfm m³/hr cfm x 1.69 =m³/hr
cfm l/s cfm x 0.47 = l/s
QUICK CROSS-REFERENCE CALCULATIONS:
Convert from one to other types of measurement:
Note:
Stated extraction rates are “free air” values and do
not account for grille type or duct run restrictions.
CONVERTING LITRES/SECOND (L/S) AND CUBIC
METRES/HOUR (M³/HR) (NOTE: 1M3 = 1000 LITRES)
If you know the Litres/Second (l/s):
l/s x 3.6 = m³/hr. (e.g. 25 l/s x 3.6 = 90m³/hr).
If you know the Cubic Metres/Hour (m³/hr):
m³/hr ÷ 3.6 = l/s. (e.g. 200m³/hr ÷ 3.6 = 55.55 l/s).
7Simx Limited | www.simx.co.nz | sales@simx.co.nz
EXTRACTION SELECTIONCALCULATING EXTRACTION RATES
COMPARE CENTRIFUGAL AGAINST AXIAL
FAN PERFORMANCE:
100mm (Axial) vs 100mm (Centrifugal) fan.
The starting point is the free air performance of 23
l/s for the axial and 31 l/s for the centrifugal. As duct
is added to each of these fans, this increases the
pressure (Pa) and decreases volume of air moved.
From the below example you can see that at 20Pa of
pressure the 100mm axial fan airfl ow has stopped
whereas the 100mm centrifugal fan is still moving
29 l/s!
Smaller duct = greater resistance to airfl ow.
More bends = greater resistance to airflow.
Longer duct runs = increasingly reduced airfl ow.
Manrose ALUDUCT fl exible ducting retains its
stretched-out shape (for smooth airfl ow) far
better than most competitive products.
Many competitive ducts tend to shrink back on
themselves, wrinkling the duct fabric.
FAN TYPES
Centrifugal: Pressure developing fans which achieve
good fl ow against the resistance created in a ducted
system. Particularly useful in venting areas like internal
bathrooms/laundries, multi-room extraction systems,
heat transfer systems, etc.
Mixed Flow: Powerful in-duct mounted fans, designed
for applications that require high air fl ows, with low
relative noise. Can handle more pressure than an axial
fan, although not as powerful as a centrifugal fan.
Axial: Suitable for wall, window and roof applications
where they can extract directly to the outside.
Short duct runs are an option but the length of duct
should be limited, to those noted below:
100mm diameter : 2-3m length
125mm diameter : 3-4m length
150mm diameter : 4-5m length
150mm (Axial) vs 150mm (Centrifugal) fan.
The starting point is the free air performance of 89 l/s
for the axial and 115 l/s for the centrifugal.
As duct is added to each of these fans, this increases the
pressure (Pa) and decreases the volume of air moved.
From the below example you can see that at 120 Pa of
pressure the 150mm axial fan airfl ow has stopped whereas
the 150mm centrifugal fan is still moving 102 l/s!
Wrinkled duct airflow
Wrinkled ducting causes turbulence and
reduces airfl ow:
Volume l/sec
Sta
tic
pre
ssu
re P
a
Volume m3/hr
SF200
SF100
100mm (Axial) vs 100mm (Centrifugal)
*Graphs are a visual
representation only.
SIMPLE FACTS
Smooth duct airflow
Smoother, extended ducting allows smooth,
increased airfl ow:
*Graphs are a visual
representation only.
50
150
100
200
250
300
0 20 40 60 80 100 120 140
0 72 144 216 288 360 432 504
0
350
Volume l/sec
Sta
tic
pre
ssu
re P
a
Volume m3/hr
MAN150
ID150
150mm (Axial) vs 150mm (Centrifugal)
8
EXTRACTION SELECTION
When considering where in the room to place an extractor fan, you
must consider the wet areas.
Zone 1: This is the zone directly within the shower or bath up to
2.25 metres above the fl oor and 150mm around the bath/shower
cubicle. An SELV fan or an inline fan kit will be required in this zone.
For example if a fan is mounted directly over the bath or shower it
must be a low voltage fan (SELV).
Zone 2: This zone is 0.6 metres horizontally outside of zone 1 and
up to 2.25 metres above the fl oor.
Zone 3: The outer layer is zone 3, which is 2.4 metres horizontally
outside of zone 2 and 2.25 metres above the fl oor.
Requires an SELV Fan or an
Inline fan kit.
Any fan model can be used.
Any fan model can be used.
Zone 1:
Zone 2:
Zone 3:
Select the model that exhausts the closest to your requirements.
If the performance required falls between two fans, it is recommended you
select the one handling the most air, as grille type and duct run length
will reduce the stated ‘free air’ performance.
9Simx Limited | www.simx.co.nz | sales@simx.co.nz
EXTRACTION SELECTIONWET AREA ZONE GUIDE
Location of your extraction fan will depend on the physical constraints of your room. The wet area zone guide (shown
on the previous page) will help you decide the most suitable physical installation to meet your requirements. Within the
various mounting options there are other features available, such as:
• TIMER (maintain fan operation for a set time after the room is vacated).
• PULLCORD (switch at fan, instead of wall switch control).
• AUTO-SHUTTER (electrically operated shutters inside the fan - closed when the fan is not running to stop draughts).
• PIR SENSOR (provide automatic motion-sensor control of fans).
Ceiling Mounted Fan
Designed for low-pitch roofs or between fl oors,
where there is no ceiling access. Also available
with heat lamps & lighting.
Thru Wall Fan Kit
Used where the bathroom is on an external wall,
or there is no ceiling space for an inline fan.
Window Mounted Fan
Used in situations where an existing window fan is
being replaced, or where there is no available external
wall space and no ceiling space access.
Inline Mounted Fan Kit
Most common bathroom installation, the fan is mounted
in the ceiling space with the grille directly above the
source of the steam.
Generally this type of installation is quieter as the fan is
not directly in the room.
Thru Roof Kit
Used where there is limited access to the roof space, or
where there is no soffi t available. Thru Roof Kits can be
used with any extraction fan, or use a Thru Roof Fan Kit
with the fan mounted within the cowl.
Wall/Ceiling
Thru Wall
Heat/Fan/Light
Inline
Window
10
EXTRACTION SELECTIONFAN TYPES
• 19mm stylish low profi le grille.
• Downstream airfl ow guide vanes for improved pressure development.
• 1 of 2 speeds selectable at installation.
• High quality ball bearing motors.
• Modern aesthetics, includes blue LED “on light”.
• Fan IPX4 rated.
• 5 Year Warranty.
Vent-Axia Lo-Carbon long life motors last considerably longer than conventional motors whilst delivering up to 67% energy savings.
The extended life of Lo-Carbon fans is due to a new generation of high quality ball bearing motors.
With a slim profi le of only 19mm, Silhouette blends in with the wall surface to provide an unobtrusive installation. Silhouette can
be ceiling or wall mounted and connected to an appropriate duct run to exhaust outside.
Models include 2 speeds selectable at installation to customise the fan to each application and come complete with a blue LED
to indicate operation.
Size
(mm)Model. Description & Switching
Extract Performance* Watts Sound Order Code
(m3/hr) (l/s) (W)dB(A)
@3m
150 LCS150BLo-Carbon Wall/Ceiling
Silhouette Standard
165 46 5 35 FAN2213
241 67 8.2 43
150 LCS150TLo-Carbon Wall/Ceiling
Silhouette Timer
165 46 5 35 FAN2214
241 67 8.2 43
* 1 of 2 speeds selectable at installation
PERFORMANCE
WATTAGE COMPARISON
Size (mm) Model. Description Wattage
150 XFLP150 Manrose Pro-Series Wall/Ceiling Fan 25W
150 LCS150 Vent-Axia Lo-Carbon Wall/Ceiling Fan 8.2W
Energy Savings 16.8W
Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
11Simx Limited | www.simx.co.nz | sales@simx.co.nz
VENT-AXIA LO CARBON WALL/CEILING MOUNTED FANSSILHOUETTE® 150
Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Duct Size Model. Switching Method Performance Order Code
125mm XFLP125SS Standard 36 l/s, 130m3/hr FAN0589
125mm XFLP125ST Timer 36 l/s, 130m3/hr FAN0590
150mm XFLP150SS Standard 101 l/s, 364m3/hr FAN0594
150mm XFLP150ST Timer 101 l/s, 364m3/hr FAN0595
Duct Size Model Switching Method Performance Order Code
125mm XFLP125CS Standard 36 l/s, 130m3/hr FAN0604
125mm XFLP125CT Timer 36 l/s, 130m3/hr FAN0605
150mm XFLP150CS Standard 101 l/s, 364m3/hr FAN0609
150mm XFLP150CT Timer 101 l/s, 364m3/hr FAN0610
CIRCULAR MODELS
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
• Unique low profi le design enables these fans to be installed unobtrusively into any wall or ceiling.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
ACCESSORIES
Duct Size Square Facia Order Code
125mm Satin Silver Fascia FAN2068
125mm Chrome Fascia FAN0755
150mm Satin Silver Fascia FAN2071
150mm Chrome Fascia FAN0598
Duct Size Circular Facia Order Code
125mm Satin Silver Fascia FAN2069
125mm Chrome Fascia FAN0757
150mm Satin Silver Fascia FAN2070
150mm Chrome Fascia FAN0613
SQUARE MODELS
Duct Size Model Switching Method Performance Order Code
125mm XFLP125SLV Standard 36 l/s, 130m3/hr FAN5886
125mm XFLP125CLV Standard 36 l/s, 130m3/hr FAN5885
150mm XFLP150SLV Standard 101 l/s, 364m3/hr FAN5892
150mm XFLP150CLV Standard 101 l/s, 364m3/hr FAN5891
MANROSE PRO-SERIES WALL/CEILING MOUNTED FANSXFLP LOW PROFILE MODELS
Square Model
Circular Model
SELV Model
Satin Silver / Chrome Fascia
12VAC transformer included and suitable for installation in damp areas, zones 1, 2 and 3.
12
Dimensions - XFLP
D
BC
A
A
A
Model A B C D
XFLP125S 161 122 10 118
XFLP125C 165 122 10 118
XFLP150S 191 122 10 150
XFLP150C 198 122 10 150
Model Circular Cut-Out Size
XFLP125S 140mm - Using gib fixing clips supplied/included
XFLP125C 140mm - Using gib fixing clips supplied/included
XFLP150S 173mm - Using gib fixing clips supplied/included
XFLP150C 173mm - Using gib fixing clips supplied/included
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model XFLP125 XFLP150
Power 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V)
Fan Performance 36 l/s, 130m3/hr 101 l/s, 364m3/hr
Fan Wattage 20W 25W
Maximum Pressure 35 Pa 60 Pa
Fan Speed 2000 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IPX4 IPX4
Performance - XFLP125 Performance - XFLP150
GENERAL INFORMATION
13Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
100mm XF100S Standard 23 l/s, 85m3/hr FAN0046
100mm XF100P Pull Cord 23 l/s, 85m3/hr FAN0047
100mm XF100T Timer 23 l/s, 85m3/hr FAN0048
125mm XF125S Standard 36 l/s, 130m3/hr FAN0072
125mm XF125P Pull Cord 36 l/s, 130m3/hr FAN0074
125mm XF125T Timer 36 l/s, 130m3/hr FAN0075
150mm XF150S Standard 101 l/s, 364m3/hr FAN0120
150mm XF150P Pull Cord 101 l/s, 364m3/hr FAN0126
150mm XF150T Timer 101 l/s, 364m3/hr FAN0127
150mm XF150PIR PIR Control 101 l/s, 364m3/hr FAN0124
AUTO SHUTTER MODELS
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
• Designed for wall or ceiling mounting, these models are effi cient and easy to install.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
STANDARD MODELS
Standard Model
Safety Model (SELV)
Auto Shutter Model
Duct Size Model Switching Performance Order Code
100mm XF100LV Standard 23 l/s, 85m3/hr FAN5883
125mm XF125LV Standard 36 l/s, 130m3/hr FAN5890
150mm XF150LV Standard 101 l/s, 364m3/hr FAN5896
12VAC transformer included and suitable for installation in damp areas, zones 1, 2 and 3.
Switching Options
Duct Size Model Switching Performance Order Code
150mm XF150A Standard 87 l/s, 313m3/hr FAN0121
150mm XF150AP Pull Cord 87 l/s, 313m3/hr FAN0122
150mm XF150AT Timer 87 l/s, 313m3/hr FAN0123
Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
14
MANROSE CLASSIC WALL/CEILING MOUNTED FANSXF MODELS
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
3. Pull Cord - Integral pull cord switch on fan.
4. PIR Control - Motion sensor incorporated in fan.
NOTE: All fan fl ow rates quoted are free air delivery
A
B
C
D
E
Dimensions - XF
Model A B C D E
XF100 155 98 74 27 155
XF125 168 118 74 27 168
XF150 200 148 74 27 200
XF150PIR 200 148 90 55 200
XF150A/AP 200 148 90 55 200
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model Circular Cut-Out Size
XF100 112mm
XF125 140mm
XF150 160mm
Please note: Fan cut out size is a nominal diameter.
Performance - XF100 Performance - XF125 Performance - XF150
GENERAL INFORMATION
Model XF100 XF125 XF150
Power 220 - 240V (LV models 12V) 220 - 240V (LV models 12V) 220 - 240V (LV models 12V)
Fan Performance 23 l/s, 85m3/hr 36 l/s, 130m3/hr 101 l/s, 364m3/hr*
Fan Wattage 20W 20W 25W
Maximum Pressure 20 Pa 35 Pa 60 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4
*Auto shutter 87 l/s, 313m3/hr installed.
15Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
230mm XFS230S Standard 152 l/s, 550m3/hr FAN0374
300mm XFS300S Standard 306 l/s, 1100m3/hr FAN2040
300mm XFS300S Standard 306 l/s, 1100m3/hr FAN2040
Duct Size Model Switching Performance Order Code
230mm XFS230A Standard 152 l/s, 550m3/hr FAN0346
300mm XFS300A Standard 306 l/s, 1100m3/hr FAN2041
AUTO SHUTTER MODELS
Duct Size Model Switching Performance Order Code
230mm XPS230S Standard 152 l/s, 550m3/hr FAN0455
300mm XPS300S Standard 306 l/s, 1100m3/hr FAN2042
Commercial ModelsDuct Size Model Switching Performance Order Code
230mm XPS230A Standard 152 l/s, 550m3/hr FAN0348
300mm XPS300A Standard 306 l/s, 1100m3/hr FAN2043
Auto Shutter Models
Commercial Models
Auto Shutter Models
AUTO SHUTTER MODELS
MANROSE CLASSIC WALL/CEILING MOUNTED FANSXFS COMMERCIAL MODELS
MANROSE CLASSIC THRU WALL FAN KITSXPS COMMERCIAL MODELS
STANDARD MODELS
STANDARD MODELS
Switching Options
1. Standard - Operates from remote switch (not supplied).
16
Model XFS230 XFS300 XPS230 XPS300
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 152 l/s, 550m³/hr 306 l/s, 1100m³/hr 152 l/s, 550m³/hr 306 l/s, 1100m³/hr
Fan Wattage 45W 82W 45W 82W
Maximum Pressure 50 Pa 60 Pa 50 Pa 60 Pa
Fan Speed 1250 RPM 1300 RPM 1250 RPM 1300 RPM
Sound Level 50 dB(A) 60 dB(A) 50 dB(A) 60 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4
Model A B C D E F G H I
XFS230 286 230 141 75 66 - - - -
XFS300 362 300 156 81 75 - - - -
XPS230 286 230 141 75 286 250 375 248 30
XPS300 362 300 156 81 350 230 375 298 50
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model Fan Cut-Out Size Exterior Grille Duct Type Duct Length
XFS230 265mm - - -
XFS300 310mm - - -
XPS230 265mm White Fixed Grille Aluminium Semi-Rigid 375mm
XPS300 310mm White Fixed Grille Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
A
B
C
D
E
A
Dimensions - XF230/300 Dimensions - XPS230/300
Performance - XFS230 Performance - XFS300
GENERAL INFORMATION
17Simx Limited | www.simx.co.nz | sales@simx.co.nz
• Designed for apartments where space is limited, these ceiling mounted
centrifugal fans can be installed in confi ned spaces.
• The centrifugal fan design assists ‘whisper quiet’ operation.
• Reliable long lasting ball bearing motor.
• FAN0884 & FAN0885 supported by a 2 year warranty.
• FAN2465 supported by a 3 year warranty.
Duct Size Model Colour Performance Order Code
100mm WVC100W White 63 l/s, 225m3/hr FAN0884
100mm WVC100S Stainless 63 l/s, 225m3/hr FAN0885
150mm WVC150S White 101 l/s, 364m3/hr FAN2465
Simx WhisperVent 150 - White
Simx WhisperVent 100 - Silver
Simx WhisperVent 100 - White
STANDARD MODELS
18
SIMX WHISPERVENT CENTRIFUGAL CEILING FANSWVC MODELS
Model A B C D
WhisperVent 100 245 240 280 290
WhisperVent 150 315 330 355 370
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model WhisperVent 100 WhisperVent 150
Power 220 - 240V 220 - 240V
Fan Performance 63 l/s, 225m3/hr 101 l/s, 364m3/hr
Fan Wattage 30W 42W
Maximum Pressure 105 Pa 145 Pa
Fan Speed 2500 RPM 2500 RPM
Sound Level 38 dB(A) 44 dB(A)
Max. Operating Temp 40oC 40oC
IP Rating IPX4 IPX4
Performance - WhisperVent 100
50 100 150 200 250
7515 30 45 60
20
40
60
0
80
100
120
140
160
200 40 60 80 100 120
500 100 150 200 250 300 350 400
Pre
ssu
re (
Pa
)
Volume (l/s)
Volume (m³/hr)
Performance - WhisperVent 150
DIMENSION INFORMATION (MM)
A - cut out size
D
B
C
19Simx Limited | www.simx.co.nz | sales@simx.co.nz
3. PIR Control - Motion sensor incorporated in fan. Range up to 5 metres.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Requires three wires: permanent phase, switched phase, neutral.
Duct Size Model SwitchingPerformance @
Speed 3Order Code
100mm FFCF234S Standard 65 l/s, 234m3/hr FAN0038
100mm FFCF234T Timer 65 l/s, 234m3/hr FAN0499
100mm FFCF234PIR PIR Control 65 l/s, 234m3/hr FAN0501
SURFACE MOUNT RANGE
Duct Size Model SwitchingPerformance @
Speed 3Order Code
100mm SMCF234S Standard 65 l/s, 234m3/hr FAN0504
100mm SMCF234T Timer 65 l/s, 234m3/hr FAN0505
• Designed for apartments where space is limited, with a choice of wall or ceiling mounted system.
• These Models include centrifugal fans with a choice of three in-built speed settings depending
on the performance required.
• Supported by a 2 year warranty.
Duct Size Model SwitchingPerformance
@ Speed 1Order Code
100mm CF200S Standard 31 l/s, 110m3/hr FAN0041
100mm CF200TP Timer 31 l/s, 110m3/hr FAN0042
• Designed to move air over long distances.
• The centrifugal fan design provides effi cient airfl ow and quiet operation.
• Supported by a 2 year warranty.
Flush Fitting Range
CF Centrifugal Model
FLUSH FITTING RANGE
Surface Mount Range
STANDARD MODELS
20
MANROSE CLASSIC MULTI-VENT FANSFF/SM MODELS
MANROSE CLASSIC WALL FANSCF CENTRIFUGAL MODELS
Model A B C D E F G H
Multi-Vent FFCF234 91 96 141 250 15 155 210 -
Multi-Vent SMCF234 312 250 15 119.5 22.5 63 249 -
CF200 65 65 185 260 45 98 90 135
TECHNICAL SPECIFICATION & PERFORMANCE DATA
1 Speed 2 Speed 3 Speed
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 28 l/s, 100m3/hr 45 l/s, 162m3/hr 65 l/s, 234m3/hr 31 l/s, 110m3/hr
Fan Wattage 40W 80W 110W 45W
Maximum Pressure 140 Pa 165 Pa 180 Pa 120 Pa
Fan Speed 950 RPM 1500 RPM 1850 RPM 1400 RPM
Sound Level 37 dB(A) 51 dB(A) 56 dB(A) 45 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4
NOTE: 1, 2, 3 refer to speed settings controlled by internal switch (not consumer adjustable).
DIMENSION INFORMATION (MM)
A
B
C
D
E
GH
F
Dimensions - CF200
F
A
B
CE
G
D
Dimensions - Multi-Vent (Surface Mount) Dimensions - Multi-Vent (Flush Fitting)
A
B
C
D
EG
D
G
F
Performance - Multi-Vent Performance - CF200
21Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
125mm XPLP125SS Standard 36 l/s, 130m3/hr FAN0614
125mm XPLP125ST Timer 36 l/s, 130m3/hr FAN0615
150mm XPLP150SS Standard 101 l/s, 364m3/hr FAN0621
150mm XPLP150ST Timer 101 l/s, 364m3/hr FAN0623
Duct Size Model Switching Performance Order Code
125mm XPLP125SLV Standard 36 l/s, 130m3/hr FAN5887
125mm XPLP125CLV Standard 36 l/s, 130m3/hr FAN5888
150mm XPLP150SLV Standard 101 l/s, 364m3/hr FAN5894
150mm XPLP150CLV Standard 101 l/s, 364m3/hr FAN5893
• The unique Low Profi le design enables these fans to be installed unobtrusively
into any wall (requires a minimum wall cavity of 110mm).
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
ACCESSORIES
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
Duct Size Square Fascia Order Code
125mm Satin Silver Fascia FAN2068
125mm Chrome Fascia FAN0755
150mm Satin Silver Fascia FAN2071
150mm Chrome Fascia FAN0598
Duct Size Circular Fascia Order Code
150mm Satin Silver Fascia FAN2070
150mm Chrome Fascia FAN0613
Low Voltage Models
Standard Models
Accessories - Circular Fascia
Accessories - Square
STANDARD MODELS
Kits include: ducting,
exterior grille and fi xtures.
Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
12VAC transformer included and suitable for installation in damp areas, zones 1, 2 and 3.
22
MANROSE PRO-SERIES THRU WALL MOUNTED FAN KITSXPLP LOW PROFILE MODELS
Model A B C D E F G H I
XPLP125 161 118 128 10 160 125 375 123 30
XPLP150 191 150 132 10 174 150 375 148 30
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model XPLP125 XPLP150
Power 220 - 240V (LV models 12V) 220 - 240V (LV models 12V)
Fan Performance 36 l/s, 130m3/hr 101 l/s, 364m3/hr
Fan Wattage 20W 25W
Maximum Pressure 35 Pa 60 Pa
Fan Speed 2000 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IPX4 IPX4
Model Fan Cut-Out Size Exterior Grille Duct TypeDuct
Length
XPLP125 140mm White Gravity Shutter Aluminium Semi-Rigid 375mm
XPLP150 173mm White Gravity Shutter Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
FE
G
H
I
AB
CDDimensions - XPLP
Performance - XPLP125 Performance - XPLP150
23Simx Limited | www.simx.co.nz | sales@simx.co.nz
GENERAL INFORMATION
Duct Size Model Switching Performance Order Code
100mm XP100S Standard 23 l/s, 85m3/hr FAN0053
100mm XP100P Pull Cord 23 l/s, 85m3/hr FAN0054
100mm XP100T Timer 23 l/s, 85m3/hr FAN0055
125mm XP125S Standard 36 l/s, 130m3/hr FAN0080
125mm XP125P Pull Cord 36 l/s, 130m3/hr FAN0082
125mm XP125T Timer 36 l/s, 130m3/hr FAN0083
150mm XP150S Standard 101 l/s, 364m3/hr FAN0135
150mm XP150P Pull Cord 101 l/s, 364m3/hr FAN0140
150mm XP150T Timer 101 l/s, 364m3/hr FAN0141
AUTO SHUTTER MODELS
Duct Size Model Switching Performance Order Code
150mm XP150A Standard 87 l/s, 313m3/hr FAN0136
150mm XP150AP Pull Cord 87 l/s, 313m3/hr FAN0137
150mm XP150AT Timer 101 l/s, 364m3/hr FAN0138
• These fans are designed to be ducted straight through an exterior wall and are effi cient and easy to install.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
Duct Size Model Switching Performance Order Code
100mm XP100LV Standard 25 l/s, 85m3/hr FAN5882
125mm XP125LV Standard 36 l/s, 130m3/hr FAN5889
150mm XP150LV Standard 101 l/s, 364m3/hr FAN5895
Standard Models
Auto Shutter Models
Low Voltage Models
STANDARD MODELS
3. Pull Cord - Integral pull cord switch on fan.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Requires three wires: permanent phase, switched phase, neutral.
Kits include: ducting,
exterior cowl or grille and
fi xtures.
Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
12VAC transformer included and suitable for installation in damp areas, zones 1, 2 and 3.
24
MANROSE CLASSIC THRU WALL MOUNTED FAN KITSXP MODELS
Performance - XP100 Performance - XP125 Performance - XP150
Model A B C D E F G H I
XP100 155 98 74 27 138 100 375 98 30
XP125 168 118 74 27 160 125 375 123 30
XP150 200 148 74 27 174 150 375 148 30
XP150A 200 148 90 55 174 150 375 148 30
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model Fan Cut-Out Size Exterior Grille Duct Type Duct Length
XP100 112mm Weatherproof Cowl Aluminium Semi-Rigid 375mm
XP125 140mm Weatherproof Cowl Aluminium Semi-Rigid 375mm
XP150 160mm Weatherproof Cowl Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
F AB
CD
E
G
H
I
Dimensions - XP
Model XP100 XP125 XP150
Power 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V)
Fan Performance 23 l/s, 85m³/hr 36 l/s, 130m³/hr 101 l/s, 364m3/hr*
Fan Wattage 20W 20W 25W
Maximum Pressure 20 Pa 35 Pa 60 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4
*Auto shutter 87 l/s, 313m3/hr installed.
GENERAL INFORMATION
25Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
100mm WF100P Pull Cord 23 l/s, 85m3/hr FAN0021
100mm WF100PLV Low Voltage 23 l/s, 85m3/hr FAN5884
AUTO SHUTTER MODELS
• Designed for use in situations where an existing window fan is being replaced or
where there is no available external wall space or ceiling space access.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
Standard Models
Auto Shutter Models
STANDARD MODELS
2. Pull Cord - Integral pull cord switch on fan..
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Duct Size Model Switching Performance Order Code
150mm WF150AP Pull Cord 87 l/s, 313m3/hr FAN0107
150mm WF150APT Pull Cord Timer 87 l/s, 313m3/hr FAN0109
150mm WF150APLV Low Voltage 87 l/s, 313m3/hr FAN5897
Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
12VAC transformer included with LV switching models and suitable for installation in damp areas,
zones 1, 2 and 3.
12VAC transformer included with LV switching models and suitable for installation in damp areas,
zones 1, 2 and 3.
26
MANROSE CLASSIC WINDOW MOUNTED FANSWF MODELS
Model A B C D
WF100 163 90 30 163
WF150 203 118 23 203
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model WF100 WF150
Power 220 - 240V 220 - 240V (SELV models 12V)
Fan Performance 23 l/s, 85m³/hr 87 l/s, 313m3/hr
Fan Wattage 20W 25W
Maximum Pressure 20 Pa 60 Pa
Fan Speed 2400 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50oC 50oC
IP Rating IPX4 IPX4
Model Glass Cut-Out Size
WF100 115mm - 155mm
WF150 165mm - 190mm
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
A
BC
D
Performance - WF100 Performance - WF150
GENERAL INFORMATION
Dimensions - WF
27Simx Limited | www.simx.co.nz | sales@simx.co.nz
COM MODELS
AUTO SHUTTER MODELS
Duct Size Model Switching Performance Order Code
300mm WF300A Standard 306 l/s, 1100m3/hr FAN0482
230mm WF230AP Pull Cord 152 l/s, 550m3/hr FAN0146
Duct Size Model Switching Performance Order Code
230mm COM230A Standard 185 l/s, 670m3/hr FAN0519
230mm COM230MP Pull Cord 185 l/s, 670m3/hr FAN0518
300mm COM300A Standard 280 l/s,1020m3/hr FAN0521
300mm COM300MP Pull Cord 280 l/s,1020m3/hr FAN0520
• Designed for use in situations where an existing window fan is being replaced
or where there is no available external wall space or ceiling space access.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
Duct Size Model Switching Performance Order Code
230mm WF230P Pull Cord 152 l/s, 550m3/hr FAN0148
300mm WF300P Pull Cord 306 l/s, 1100m3/hr FAN0481
• Designed for commercial applications such as pubs, restaurants, hotels, shops etc.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
Standard Larger Models
Auto Shutter Models
Commercial Auto
Shutter Models
STANDARD MODELS
Switching Options
Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
28
MANROSE CLASSIC WINDOW COMMERCIAL FANSWF/COM MODELS
1. Standard - Operates from remote switch (not supplied).
2. Pull Cord - Integral pull cord switch on fan.
NOTE: All fan fl ow rates quoted are free air delivery.
Model A B C D E
WF230 286 286 4-32 112 25
WF300 362 362 4-32 133 29
COM230 286 125 25 154 -
COM300 362 145 25 170 -
Model WF230 WF300 COM230 COM300
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 152 l/s, 550m3/hr 306 l/s, 1100m3/hr 185 l/s, 670m3/hr 280 l/s, 1020m3/hr
Fan Wattage 45W 82W 45W 82W
Maximum Pressure 50 Pa 60 Pa 50 Pa 60 Pa
Fan Speed 1250 RPM 1300 RPM 1600 RPM 1300 RPM
Sound Level 50 dB(A) 60 dB(A) 53 dB(A) 60 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model Glass Cut-Out Size
WF230 255mm - 270mm
WF300 310mm - 345mm
COM230 255mm - 270mm
COM300 310mm - 345mm
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
A
B
C
D E
Dimensions - WF230/300
A
B
C
A
C
D
Dimensions - COM230/300
Performance - WF230 Performance - WF300
55
40
25
0
0 250 500 750
0 70 140 210
Stat
ic P
ress
ure
Pa
Volume l/sec
Volume m /hr3
55
40
25
00 83 168 250 333 416
0 300 600 900 1200 1500
Stat
ic P
ress
ure
Pa
Volume l/sec
Volume m /hr3
Performance - COM230 Performance - COM300
GENERAL INFORMATION
29Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Performance Order Code
150mm LED HFL 2 White 86 l/s, 310m3/hr FAN4463
150mm LED HFL 2 Silver 86 l/s, 310m3/hr FAN4464
150mm LED HFL 4 White 86 l/s, 310m3/hr FAN4465
150mm LED HFL 4 Silver 86 l/s, 310m3/hr FAN4466
ACCESSORIES
Description Order Code
275W Heat Lamp LHT0081
LED Replacement Lamp for White Units LHT0210
LED Replacement Lamp for Silver Units LHT0211
• With high levels of extraction, these units have a stylish low profi le design,
making them easy to install into tight fi tting roof cavities.
• The units incorporate long-life energy effi cient LED centre lamps.
• Supported by a 5 year warranty.
Designer Series HFL 4
Designer Series HFL 2
STANDARD MODELS
30
MANROSE DESIGNER SERIES LED HEAT/FAN/LIGHT KITS
NOTE: All fan fl ow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
Model Cut-Out Size Exterior Grille Duct Type Duct Length
LED HFL 4 Slv 435mm x 275mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
LED HFL 4 Wht 435mm x 275mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
LED HFL 2 Slv 435mm x 255mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
LED HFL 2 Wht 435mm x 255mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION
Models LED HFL 4 DLED HFL 2
Power 230 - 240V 230 - 240V
Fan Centrifugal Centrifugal
Fan Performance 86 l/s, 310m³/hr 86 l/s, 310m³/hr
Heat Lamps 4 x 275W 2 x 275W
Light GU10 LED GU10 LED
Total Wattage 1080 - 1180W 550 - 610W
Light Wattage 4 x 4.5W 3 x 4.5W
Switch Plate 4 sw. (supplied) 3 sw. (supplied)
A
B
C
D
AB
C
D
Dimensions - LED HFL 2Dimensions - LED HFL 4
Model A B C D
LED HFL 4 480 360 205 120*
LED HFL 2 480 290 205 120*
* 125mm to 150mm adapter included in kit.
GENERAL INFORMATION
31Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Performance Order Code
150mm Heater Fan Light PANEL 69 l/s, 248m3/hr FAN6577
150mm Heater Fan Light HALO 69 l/s, 248m3/hr FAN5876
150mm Heater Fan Light PTC 22 l/s, 79m3/hr FAN5875
• Halogen or PTC Heaters.
• Contemporary low profi le linear design.
• Complete system ready for ceiling installation.
• Energy effi cient LED lighting.
Heater Fan Light HALO
Heater Fan Light PTC
MANROSE DESIGNER SERIES HEATER FAN LIGHTS
NOTE: All fan fl ow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
These Designer Series Heater/Fan/Light units are designed to add functionality with
fl air to your bathroom. Systems feature low profi le designs and supplementary LED
lighting. All systems come with duct, grille and wall switch.Heater Fan Light PANEL
STANDARD MODELS
32
Model Cut-Out Size Exterior Grille Duct Type Duct Length
Heater Fan Light PANEL 455mm x 305mm 150mm Eggcrate Aluduct 150mm x 3m
Heater Fan Light HALO 455mm x 305mm 150mm Eggcrate Aluduct 150mm x 3m
Heater Fan Light PTC 420mm x 275mm 100mm Eggcrate Aluduct 100mm x 3m
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION
Model Heater Fan Light PANEL Heater Fan Light HALO Heater Fan Light PTC
Power 220 - 240V ~ 50Hz 220 - 240V ~ 50Hz 220 - 240V ~ 50Hz
Max Load 1100W 1100W 2250W
Fan Centrifugal Centrifugal Centrifugal
Fan Performance69 l/s (as installed with
supplied components)
69 l/s (as installed with
supplied components)
22 l/s (as installed with
supplied components)
Heat 1 x 1000W Halogen 1 x 1000W HalogenPTC (Positive Temperature
Coefficient)
Lamp2 x 12W LED Panels
4000K
6 x 4.5W LEDs
GU10 LED down light
3000K 38° degree
14W, 4000k White
1000 Lumens
Switch Plate 3-Way Switch (supplied) 3-Way Switch (supplied) 4-Way Switch (supplied)
Heater Fan Light PTC
A
B
CD
Model A B C D
Heater Fan Light PANEL 500 350 200 150
Heater Fan Light HALO 500 350 200 150
Heater Fan Light PTC 450 300 185 100
GENERAL INFORMATION
Heater Fan Light PANEL
A
B
C
D
Heater Fan Light HALO
A
B
C
D
33Simx Limited | www.simx.co.nz | sales@simx.co.nz
2 Heat ‘n Light
Classic Heat ‘n Vent 2
Pro-Series Heat ‘n Vent 2
MANROSE CLASSIC HEAT/LIGHT KITS2 HEAT ‘N LIGHT
MANROSE CLASSIC HEAT/FAN/LIGHT KITSHEAT ‘N VENT 2
Duct Size Model Performance Order Code
125mm Heat ‘n Vent 4 60 l/s, 216m3/hr FAN0995
125mm Heat ‘n Vent 2 50 l/s, 180m3/hr FAN0940
ACCESSORIES
Duct Size Description Order Code
125mm Heat ‘n Vent 4 Silver Fascia FAN1015
125mm Heat ‘n Vent 2 Silver Fascia FAN1014
275W Heat Lamp LHT0081
50W Halogen GU10 lamp LHT0140
• These systems meet the demands of larger bathrooms and the stylish fascia
blends into the decor.
• These high effi ciency centrifugal fans incorporate a unique anti-condensate
design feature.
• Supported by a 5 year warranty.
Duct Size Model Performance Order Code
100mm Heat ‘n Vent 2 35 l/s, 126m3/hr FAN2162
Duct Size Description Order Code
100mm 2 Heat ‘n Light (excludes fan) FAN2200
• This system delivers instant heat combined with ventilation and
soft lighting to create a comfort area in small bathrooms.
• Supported by a 5 year warranty.
• This system provides instant heat and additional lighting.
• For a complete bathroom solution an extraction fan can be added.
• Supported by a 5 year warranty.
Pro-Series Heat ‘n Vent 4
34
MANROSE PRO-SERIES HEAT/FAN/LIGHT KITSHEAT ‘N VENT MODELS
NOTE: All fan fl ow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
Model A B C D
PS Heat ‘n Vent 4 338 338 170 120
PS Heat ‘n Vent 2 435 260 185 120
Heat ‘n Vent 450 250 195 100
Heat ‘n Light 450 250 195 100
Model Cut-Out Size Exterior Grille Duct Type Duct Length
PS Heat ‘n Vent 4 300mm x 300mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
PS Heat ‘n Vent 2 390mm x 210mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Vent 2 390mm x 220mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Light 390mm x 220mm - - -
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model PS Heat ‘n Vent 4 PS Heat ‘n Vent 2 Heat ‘n Vent 2 2 Heat ‘n Light
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Centrifugal Centrifugal Centrifugal -
Fan Performance 60 l/s, 216m³/hr 50 l/s, 180m³/hr 35 l/s, 126m³/hr -
Heat Lamps 4 x 275W 2 x 275W 2 x 275W 2 x 275W
Light GU10 Halogen GU10 Halogen GLES GLES
Total Wattage 1180W 635W 670W 650W
Light Wattage 50W 50W 100W 100W
Switch Plate 4 sw. (supplied) 3 sw. (supplied) 3 sw. (supplied) 2 sw. (supplied)
Dimensions - PS Heat ‘n Vent 2
A
B
C
D
Dimensions - PS Heat ‘n Vent 4
A B
C
Dimensions - Classic Heat ‘n Vent
D
B
C
A
D
B
C
Dimensions - Classic 2 Heat ‘n Light
72 144 180 216 252 28810836
70
Performance Graph
Pro-Series Heat ‘n Vent 401
Pro-Series Heat ‘n Vent 202
Classic Heat ‘n Vent 203010203
35Simx Limited | www.simx.co.nz | sales@simx.co.nz
GENERAL INFORMATION
Duct Size Model Switching Performance Order Code
100mm MFLP100S Standard 69 l/s, 250m3/hr FAN2049
125mm MFLP125S Standard 89 l/s, 320m3/hr FAN2050
150mm MFLP150S Standard 166 l/s, 597m3/hr FAN2051
• These powerful inline mixed fl ow fans have been designed to produce higher working
pressures for applications that require higher airfl ows with low relative noise levels.
• Supported by a 5 year warranty.
MFLP150
Model Grille Cut-Out Interior Grille Exterior Grille Duct Type Duct Length
MFLP100 115mm White Low Profile White Low Profile Unilok Nude6m supplied
(you can add up to 6m extra duct)
MFLP125 140mm White Low Profile White Low Profile Unilok Nude6m supplied
(you can add up to 6m extra duct)
MFLP150 160mm White Low Profile White Low Profile Unilok Nude6m supplied
(you can add up to 6m extra duct)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
Switching Options
36
MIXFLO PRO-SERIES INLINE FAN KITSSHOWER FAN MODELS
1. Standard - Operates from remote switch (not supplied).
Model A B C D E F G
MF100 98 182 315 100 100 168 27
MF125 122 182 350 100 100 168 60
MF150 147 209 360 130 115 195 55
TECHNICAL SPECIFICATION & PERFORMANCE DATA
ModelSound Power Levels Lw (dB)
Octave band centre frequency in Hz LwA dB(A)
125 250 500 1000 2000 4000 8000
MF100 50 56 58 58 52 47 37 61
MF125 52 59 60 60 56 49 41 63.5
MF150 58 66 65 63 62 54 46 67.5
SOUND POWER LEVELS (HIGH SPEED)
Dimensions - MF
ModelSize
(mm)RPM Watts
Maximum Airflow
(m³/hr)
Maximum
Pressure (Pa)
Lp dB(A)
3m*
IP
Rating
Max Operating
Temp °C
MF100 1002300 40 250 180
40 X4 451700 18 190 120
MF125 1252300 40 320 220
43 X4 451700 18 260 160
MF150 1502700 70 597 300
47 X4 602000 60 330 240
* Lp dB(A) @ 3 metres - sound pressure based on the high speed for each fan.
0
20
40
60
80
100
120
140
160
180
200
0 20 40 60 80
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300 350
0
50
100
150
200
250
0 20 40 60 80 100
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0
50
100
150
200
250
300
350
0 50 100 150 200
0 100 200 300 400 500 600 700
Performance - MF100 Performance - MF125 Performance - MF150
AB
CD
E
FG
37Simx Limited | www.simx.co.nz | sales@simx.co.nz
DIMENSION INFORMATION (MM)
Duct Size Model Switching Fan Type Performance Order Code
125mm SFLP125S Standard Ctr’fgl 39 l/s, 140m³/hr FAN0616
125mm SFLP125T Timer Ctr’fgl 39 l/s, 140m³/hr FAN0617
150mm SFLP150S Standard Hyper150 109 l/s, 394m³/hr FAN0618
150mm SFLP150T Timer Hyper150 109 l/s, 394m³/hr FAN0619
• These high effi ciency inline fans are designed to provide
higher levels of extraction for today’s larger bathrooms.
• Supported by a 5 year warranty.
ModelGrille
Cut-OutInterior Grille Exterior Grille Duct Type Length of duct included
SFLP125 140mmWhite Low Profile
options
Weatherproof Cowl or
Fixed insert optionFlexible PVC
4m supplied (can be
extended up to 6m)
SFLP150 160mmWhite Low Profile
options
Weatherproof Cowl or
Fixed insert optionFlexible PVC
5m supplied (can be
extended up to 6m)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
between 1-20 minutes, whereas the 150mm models include a fi xed 7
minute timer. Both require: permanent phase and switched phase.
NOTE: All fan fl ow rates quoted are free air delivery.
Performance will be affected by the length of ducting used.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off. The 100 and 125mm models are adjustable
SFLP150
38
MANROSE PRO-SERIES INLINE MOUNTED FAN KITSSFLP SHOWER FAN MODELS
Model A B C D E
SFLP125 155 125 125 195 258
SFLP150 200 143 170 185 -
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model SFLP125 SFLP150
Fan CFD225 Hyper150
Power 220 - 240V 220 - 240V
Fan Performance 39 l/s, 140m³/hr 109 l/s, 394m³/hr
Fan Wattage 20W 27W
Maximum Pressure 120 Pa 120 Pa
Fan Speed 1400 RPM 2650 RPM
Sound Level 45 dB(A) 38 dB(A)
Max. Operating Temp 50°C 70°C
IP Rating IPX4 IPX2
AB CD
E
A
B
C
D
Dimensions - SFLP125 Dimensions - SFLP150
Performance - SFLP125 Performance - SFLP150
DIMENSION INFORMATION (MM)
0
20
40
60
80
100
120
140
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (l/s)
39Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size ModelSwitching
MethodFan Type Performance Order Code
100mm SF100S Standard Axial 23 l/s, 85m3/hr FAN0017
100mm SF100T Timer Axial 23 l/s, 85m3/hr FAN0018
100mm SF200S Standard Ctr’fgl 31 l/s, 110m3/hr FAN0328
100mm SF200T Timer Ctr’fgl 31 l/s, 110m3/hr FAN0329
125mm SF125S Standard Axial 36 l/s, 130m3/hr FAN0064
125mm SF125T Timer Axial 36 l/s, 130m3/hr FAN0065
150mm SF150S Standard Hyper 109 l/s, 394m3/hr FAN0101
150mm SF150T Timer Hyper 109 l/s, 394m3/hr FAN0102
• With the fan mounted in the ceiling space, these inline models are able to draw
steam directly from source.
• These fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
FAN0101
GENERAL INFORMATION
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
Model Grille Cut-Out Interior Grille Exterior Grille Duct Type Length of duct included
SF100 115mm White Round White Fixed Louvre Flexible PVC3m supplied
(should not be extended)
SF200 115mm White Round White Fixed Louvre Flexible Alum3m supplied
(can be extended up to 6m)
SF125 140mm White Round White Fixed Louvre Flexible PVC4m supplied
(should not be extended)
SF150 160mm White Round White Fixed Louvre Flexible PVC5m supplied
(can be extended up to 6m)
between 1-20 minutes, whereas the 150mm models include a fi xed 7
minute timer. Both require: permanent phase and switched phase.
NOTE: All fan fl ow rates quoted are free air delivery.
Performance will be affected by the length of ducting used.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off. The 100 and 125mm models are adjustable
40
MANROSE CLASSIC INLINE MOUNTED FAN KITSSF SHOWER FAN MODELS
Model A B C D E
SF100 130 155 90 100 27
SF200 155 100 100 195 258
SF125 150 155 99 118 27
SF150 200 143 170 185 -
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model SF100 SF200 SF125 SF150
Fan ID100 CFD200 ID125 Hyper
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 23 l/s, 85m³/hr 31 l/s, 110m³/hr 36 l/s, 130m³/hr 109 l/s, 394m3/hr
Fan Wattage 20W 20W 20W 27W
Maximum Pressure 20 Pa 120 Pa 35 Pa 120 Pa
Fan Speed 2400 RPM 1400 RPM 2000 RPM 2650 RPM
Sound Level 41 dB(A) 45 dB(A) 41 dB(A) 38 dB(A)
Max Operating Temp 50°C 50°C 50°C 60°C
IP Rating IPX4 IPX4 IPX4 IPX2
Note: PERFORMANCE - ID Fans maximum
fan performance stated, this can vary
depending on the length of ducting used.
A
B
C
D
E
AB CD
E
Dimensions - SF100/SF125
Dimensions - SF200
A
B D
CA
B
C
D
Dimensions - SF150
Performance - SF100 Performance - SF200Performance - SF125
Performance - SF150
0
20
40
60
80
100
120
140
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (l/s)
41Simx Limited | www.simx.co.nz | sales@simx.co.nz
DIMENSION INFORMATION (MM)
Halogen Model
Fits Model Diffuser Colour Order Code
ELLP150 Incl Halogen White DCT1521
ELLP150 Incl Halogen Silver DCT1522
ELLP125 Incl Halogen White DCT1519
ELLP125 Incl Halogen Silver DCT1520
LED Model
Fits Model Diffuser Colour Order Code
ELLP150 Incl LED & Driver White DCT3211
ELLP150 Incl LED & Driver Silver DCT3212
ELLP125 Incl LED & Driver White DCT3213
ELLP125 Incl LED & Driver Silver DCT3214
ELLPS150 Incl LED & Driver White DCT3640
Switching Options
• These high effi ciency inline fans are designed to provide higher levels of
extraction for larger bathrooms.
• Choose either an energy effi cient LED or halogen lamp.
• White or satin silver fi nish available to complement your bathroom decor.
• Supported by a 5 year warranty.
Duct
SizeModel Switching Performance
Order Code
Halogen / LED
125mm ELLP125WS - Wht Standard 39 l/s, 140m3/hr FAN2029 / FAN5379
125mm ELLP125WT - Wht Timer 39 l/s, 140m3/hr FAN2031 / FAN5381
125mm ELLP125SS - Slv Standard 39 l/s, 140m3/hr FAN2030 / FAN5380
125mm ELLP125ST - Slv Timer 39 l/s, 140m3/hr FAN2032 / FAN5382
150mm ELLP150WS - Wht Standard 109 l/s, 394m3/hr FAN2033 / FAN5375
150mm ELLP150WT - Wht Timer* 109 l/s, 394m3/hr FAN2035 / FAN5377
150mm ELLP150SS - Slv Standard 109 l/s, 394m3/hr FAN2034 / FAN5376
150mm ELLP150ST - Slv Timer* 109 l/s, 394m3/hr FAN2036
150mm ELLPS150WS - Wht SQ Standard 109 l/s, 394m3/hr FAN5899
150mm ELLPS150WT – Wht SQ Timer* 109 l/s, 394m3/hr FAN5900
* Includes a 7 minute fi xed timer.
ACCESSORIES
Halogen/LED ELLP125SW
Halogen/LED ELLP150SS
GENERAL INFORMATION
ModelDiffuser
Cut-OutInterior Exterior Grille Duct Type Length of duct included
ELLP125 140mmWhite or Satin Silver
Extract-a-lite White Low Profile Black Unilok
6m supplied
(you can add up to 6m extra duct)
ELLP150 165mmWhite or Satin Silver
Extract-a-liteWhite Low Profile Black Unilok
6m supplied
(you can add up to 6m extra duct)
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out.
LED-ELLP150 Diffuser White
LED-ELLPS150 Diffuser White
between 1-20 minutes, whereas the 150mm models include a fi xed 7
minute timer. Both require: permanent phase and switched phase.
NOTE: All fan fl ow rates quoted are free air delivery.
Performance will be affected by the length of ducting used.
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off. The 100 and 125mm models are adjustable
42
MANROSE PRO SERIES INLINE FAN/LIGHT KITSELLP EXTRACT-A-LITE/LED LOW PROFILE MODELS
Model A B C D E F G H
ELLP125 155 125 125 195 258 165 80 110
ELLP150 200 143 170 185 - 200 80 148
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model ELLP125 ELLP150
Fan CFD225 Hyper
Power 220 - 240V 220 - 240V
Fan Performance 39 l/s, 140m³/hr 109 l/s, 394m³/hr
Fan Wattage 20W 27W
Maximum Pressure 120 Pa 120 Pa
Fan Speed 1400 RPM 2750 RPM
Light 12V 50W Halogen 12V 50W Halogen
12V 3W LED 12V 3W LED
Total Wattage 99W 96W
Sound Level 45 dB(A) 38 dB(A)
Max. Operating Temp 50°C 60°C
IP Rating IPX4 IPX2
F
G
H
AB CD
E
Dimensions - ELLP125 Fan
A
B D
CA
B
C
D
Dimension - ELLP150 Fan Dimensions - ELLP Extract-a-lite Diffuser
Performance - ELLP125
DIMENSION INFORMATION (MM)
0
20
40
60
80
100
120
140
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (l/s)
Performance - ELLP150
43Simx Limited | www.simx.co.nz | sales@simx.co.nz
Halogen Model
Fits Model Diffuser Colour Order Code
EL150 Incl Halogen White DCT1169
EL150 Incl Halogen Chrome DCT1171
EL125 Incl Halogen White DCT2121
EL125 Incl Halogen Chrome DCT2120
EL100 Incl Halogen White DCT0360
EL100 Incl Halogen Chrome DCT0362
LED Model
Fits Model Diffuser Colour Order Code
EL150 Incl LED & Driver White DCT3209
EL150 Incl LED & Driver Black DCT4255
EL150 Incl LED & Driver Chrome DCT3208
EL125 Incl LED & Driver White DCT3207
EL125 Incl LED & Driver Chrome DCT3206
EL100 Incl LED & Driver White DCT3205
EL100 Incl LED & Driver Chrome DCT3204
between 1-20 minutes, whereas the 150mm models include a fi xed 7
minute timer. Both require: permanent phase and switched phase.
NOTE: All fan fl ow rates quoted are free air delivery.
Performance will be affected by the length of ducting used.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off. The 100 and 125mm models are adjustable
ACCESSORIES
• The fan is mounted in the ceiling space, and is therefore able to draw steam directly
from source, while at the same time providing spot lighting within your bathroom.
• Choose either an energy effi cient LED or halogen lamp.
• These fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
Halogen/LED EL150S
ModelDiffuser
Cut-OutInterior Exterior Grille Duct Type Length of Duct included
EL100 115mmWhite or Chrome
Extract-a-lite White Eggcrate Flexible PVC 3m supplied (should not be extended)
EL125 145mmWhite or Chrome
Extract-a-liteWhite Eggcrate Flexible PVC 4m supplied (should not be extended)
EL150 165mmWhite or Chrome
Extract-a-liteWhite Eggcrate Flexible PVC 5m supplied (you can add up to 6m extra duct)
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
Duct
SizeModel Switching Performance
Order Code
Halogen / LED
100mm EL100S Standard 31 l/s, 110m3/hr FAN0420 / FAN5373
100mm EL100T Timer 31 l/s, 110m3/hr FAN0438 / FAN5374
125mm EL125S Standard 36 l/s, 130m3/hr FAN2037 / FAN5371
125mm EL125T Timer 36 l/s, 130m3/hr FAN2038 / FAN5372
150mm EL150S Standard 109 l/s, 394m3/hr FAN0803 / FAN5369
150mm EL150T Timer* 109 l/s, 394m3/hr FAN0804 / FAN5370
* Includes a 7 minute fixed timer.
125mm Halogen-EL Diffuser Chrome
150mm LED-EL Diffusers White
44
MANROSE CLASSIC INLINE FAN/LIGHT KITSEL EXTRACT-A-LITE/LED MODELS
0
20
40
60
80
100
120
140
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (l/s)
Model A B C D E F G H
EL100 130 155 90 100 27 140 74 98
EL125 150 155 99 118 27 170 74 118
EL150 200 143 170 185 - 200 74 148
TECHNICAL SPECIFICATION & PERFORMANCE DATA
F
G
H
Dimensions - EL Extract-a-lite Diffuser
Performance - EL100 Performance - EL125 Performance - EL150
Model EL100 EL125 EL150
Fan CFD200 ID125 Hyper
Power 220 - 240V 220 - 240V 220 - 240V
Fan Performance 31 l/s, 110m3/hr 36 l/s, 130m3/hr 109 l/s, 394m³/hr
Fan Wattage 20W 25W 27W
Maximum Pressure 120 Pa 35 Pa 120 Pa
Fan Speed 1400 RPM 2000 RPM 2650 RPM
Light 12V 50W Halogen 12V 50W Halogen 12V 50W Halogen
12V 3W LED 12V 3W LED 12V 3W LED
Total Wattage 70W 75W 88W
Sound Level 45 dB(A) 41 dB(A) 38 dB(A)
Max. Operating Temp 40°C 40°C 70°C
IP Rating IPX4 IPX4 IPX2
DIMENSION INFORMATION (MM)
A
B D
C
Dimensions - EL150 Fan
Dimensions - EL100
AB CD
E
Dimensions - EL125
A
B
C
D
E
45Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Speed
Setting
Performance
@ High SpeedOrder Code
100mm MF100S Standard 2 Speed 69 l/s, 250m3/hr FAN1004
100mm MF100T Timer 2 Speed 69 l/s, 250m3/hr FAN2124
100mm MF100PL Plug & Lead 2 Speed 69 l/s, 250m3/hr FAN1050
125mm MF125S Standard 2 Speed 89 l/s, 320m3/hr FAN1005
125mm MF125T Timer 2 Speed 89 l/s, 320m3/hr FAN2125
125mm MF125PL Plug & Lead 2 Speed 89 l/s, 320m3/hr FAN1051
150mm MF150S Standard 2 Speed 166 l/s, 597m3/hr FAN1006
150mm MF150PL Plug & Lead 2 Speed 166 l/s, 597m3/hr FAN1048
200mm MF200S Standard 3 Speed 272 l/s, 980m3/hr FAN1007
200mm MF200T Timer 2 Speed 272 l/s, 980m3/hr FAN2127
200mm MF200PL Plug & Lead 3 Speed 272 l/s, 980m3/hr FAN1053
• These powerful inline mixed fl ow fans have been designed to produce higher working
pressures for applications that require higher airfl ows with low relative noise levels.
• Supported by a 4 year warranty or 30,000 continuous hours.
DIMENSION INFORMATION (MM)
MixFlo 150mm Standard Model - White
Dimensions - MF
D
E
F
AB
C
GModel A B C D E F G
MF100 98 182 315 100 100 168 27
MF125 122 182 350 100 100 168 60
MF150 147 209 360 130 115 195 55
MF200 197 244 354 142 140 230 50
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
46
MIXFLO PRO-SERIES INLINE MIXED FLOW FANSFAN MODELS
0
20
40
60
80
100
120
140
160
180
200
0 20 40 60 80
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300 350
0
50
100
150
200
250
0 20 40 60 80 100
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0
50
100
150
200
250
300
350
0 50 100 150 200
0 100 200 300 400 500 600 700
Performance - MF100 Performance - MF125 Performance - MF150
Pre
ssu
re (
Pa
)
Airflow (L/s)
Airflow (m3/hr)
0 200 400 600 800 1000
0
50
100
150
200
250
300
0 50 100 150 200 250 300*MF200 Timer model only has 2 speeds, therefore
Medium fan speed specifi cations will not apply.
Performance - *MF200
Speed 1
Speed 2
Speed 3
Icon Key
ModelSize
(mm)RPM Watts
Maximum
Airflow (m³/hr)
Maximum
Pressure (Pa)
Lp dB(A)
3m*
IP
Rating
Max Operating
Temp °C
MF100 1002300 40 250 180 40
33X4 45
1700 18 190 120
MF125 1252300 40 320 220 43
36X4 45
1700 18 260 160
MF150 1502700 70 597 300 47
40X4 60
2000 60 330 240
MF200 200
2700 85 980 250 48
45
41
X4 602350 60 860 140
2000 45 706 80
* Lp dB(A) @ 3 metres - sound pressure based on the high speed for each fan.
TECHNICAL SPECIFICATION & PERFORMANCE DATA
SOUND POWER LEVELS
Model
Sound Power Levels LwA (dB) Octave
band centre frequency in Hz
125 250 500 1000 2000 4000 8000
MF100 50 56 58 58 52 47 37
MF125 52 59 60 60 56 49 41
MF150 58 66 65 63 62 54 46
MF200 65 69 64 63 62 60 48
47Simx Limited | www.simx.co.nz | sales@simx.co.nz
Switching Options
1. Standard - Operates from remote switch (not supplied).
NOTE: All fan fl ow rates quoted are free air delivery.
MANROSE CLASSIC INLINE HYPER FAN
Duct Size Model Switching Performance Order Code
150mm Hyper150 Standard 109 l/s, 394m3/hr FAN0085
• This high effi ciency inline fan is designed to provide high levels of extraction.
• The ball bearing motor prolongs the life of the motor.
• Includes 1.3m lead and 3 pin plug.
• Supported by a 5 year warranty.
Hyper 150
BELIEVE THE HYPENew Zealand’s best selling, most trusted and
trade preferred fan is now better than ever
ManroseManroseHYPER150HYPER150✔ Stronger: 394 m3/hour
✔ Quieter: 38 dB(a)
✔ MORE ENERGY EFFICIENTMORE ENERGY EFFICIENT
THE IMPROVED HYPER FANIS ALSO USED IN THESE SHOWER FAN KITS: • Manrose ProSeries Shower Fans Kits inc FAN0618
• Manrose ProSeries Extract-A-LED Shower Fan Kit inc FAN5375
• Manrose Classic Shower Fan Kits inc FAN0101
• Manrose Classic Extract-A-Lite Kits inc FAN0803
• Manrose Classic Extract-A-LED Kits inc FAN5369
• HeatTrans One Room Kit FAN0325
48
Model A B C D
Hyper150 200 143 170 185
A
B
C
D
DimensionsTECHNICAL SPECIFICATION & PERFORMANCE DATA
Model Hyper150
Power 220-240 V ~ 50Hz
Fan Performance 109 l/s, 394m³/hr
Fan Wattage 27W
Maximum Pressure 120 Pa
Sound Level 38dB
IP Rating IPX2
Performance - Hyper150
DIMENSION INFORMATION (MM)
0
20
40
60
80
100
120
140
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (l/s)
49Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
100mm ID100S Standard 23 l/s, 85m3/hr FAN0012
100mm ID100T Timer 23 l/s, 85m3/hr FAN0013
125mm ID125S Standard 36 l/s, 130m3/hr FAN0060
125mm ID125T Timer 36 l/s, 130m3/hr FAN0061
150mm ID150S Standard 87 l/s, 313m3/hr FAN0090
150mm ID150T Timer 87 l/s, 313m3/hr FAN0091
230mm ID230S Standard 152 l/s, 550m3/hr FAN0405
230mm ID230T Timer 152 l/s, 550m3/hr FAN0406
• With the fan mounted in the ceiling space, these inline models are able to
draw steam directly from the source.
• These axial fans have ball bearing motors to prolong the life of the motor.
• Supported by a 5 year warranty.
ID100/125/150
ID230
Duct Size Model Switching Performance Order Code
150mm ECO150S Standard 64 l/s, 230m3/hr FAN2078
• With the fan mounted in the ceiling space, these inline models
are able to draw steam directly from the source.
• High quality sleeve bearing motor.
• Supported by a 2 year warranty.
ECO150S
Switching Options
50
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Requires three wires: permanent phase, switched phase, neutral.
NOTE: All fan fl ow rates quoted are free air delivery.
ECO INLINE AXIAL FANS
MANROSE CLASSIC INLINE AXIAL FANSID MODELS
Model A B C D E
ID100 130 155 90 100 27
ID125 150 155 99 118 27
ECO150 (white) 187 153 109 150 27
ID150 187 153 109 150 27
ID230 (square model) 286 286 155 230 -
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model ID100 ID125 ECO150 ID150 ID230
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 23 l/s, 85m³/hr 36 l/s, 130m³/hr 64 l/s, 230m³/hr 87 l/s, 313m³/hr 152 l/s, 550m³/hr
Fan Wattage 20W 20W 25W 25W 80W
Maximum Pressure 20 Pa 35 Pa 50 Pa 60 Pa 50 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM 2400 RPM 1250 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A) 40 dB(A) 50 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4 IPX4
Dimensions - ID Fans
Performance - ID100 Performance - ID125 Performance - ECO150
Performance - ID150 Performance - ID230
Note: PERFORMANCE - ID Fans maximum fan performance stated,
this can vary depending on the length of ducting used.
DIMENSIONS SPECIFICATION (MM)
A
B
C
D
E
51Simx Limited | www.simx.co.nz | sales@simx.co.nz
Requires: permanent phase and switched phase.
NOTE: All fan fl ow rates quoted are free air delivery.
Switching Options
1. Standard - Operates from remote switch (not supplied).
2. Timer - Fan operates from a switch and continues to run for a preset
time after switching off - adjustable 1-20 minutes.
Duct Size Model Switching Performance Order Code
100mm CFD200S St andard 31 l/s, 110m³/hr FAN0326
100mm CFD200T Timer 31 l/s, 110m³/hr FAN0327
125mm CFD225S Standard 39 l/s, 140m³/hr FAN2067
125mm CFD225T Timer 39 l/s, 140m³/hr FAN2066
• These high effi ciency centrifugal fans are designed for
use where longer duct runs are required.
• These centrifugal fans have ball bearing motor prolongs
the life of the motor.
• Supported by a 5 year warranty.
Dimensions - CFD200/CFD225
Performance - CFD200 Performance - CFD225
CFD200S
Model CFD200 CFD225
Power 220 - 240V 220 - 240V
Fan Performance 31 l/s, 110m³/hr 39 l/s, 140m³/hr
Fan Wattage 20W 20W
Maximum Pressure 120Pa 120Pa
Fan Speed 1400 RPM 1400 RPM
Sound Level 45 dB(A) 45 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IP44 IPX4
Model A B C D E
CFD200 155 100 100 195 258
CFD225 155 125 125 195 258
DIMENSION INFORMATION (MM)TECHNICAL SPECIFICATION
AB C
D
E
52
MANROSE CLASSIC INLINE CENTRIFUGAL FANSCFD MODELS
Duct Size Model Performance @ Speed 3 Order Code
150mm 3 Speed 124 l/s, 445m³/hr FAN0921
200mm 3 Speed 208 l/s, 750m³/hr FAN0997
• Suitable for a variety of domestic and commercial applications, these inline
centrifugal fans provide high performance at your preset choice of speed.
• Supported by a 2 year warranty.
Please note: Can be used for supply or extract.
Model A B C D E
150mm 340 150 280 50 75
200mm 340 200 280 50 75
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models 150mm 200mm
Voltage/Freq (50hz) 220 - 240V 220 - 240V
Fan Performance Speed 1 72 l/s, 260m³/hr 120 l/s, 433m³/hr
Fan Performance Speed 2 102 l/s, 367m³/hr 161 l/s, 580m³/hr
Fan Performance Speed 3 124 l/s, 445m³/hr 208 l/s, 750m³/hr
Fan Wattage (at high speed) 57W 105W
Current (A) (at high speed) 0.26 0.47
Fan Speed (at high speed) 2450 RPM 2500 RPM
Sound Level* 43 dB(A) 56 dB(A)
Ambient Temp 50°C 70°C
* dB(A) - measured 1m free fi eld.
Performance - 150mm 3 Speed
400
300
200
100
0
Pre
ssu
re (
Pa
)
500 100 150 200
Volume (m3/hr)
Volume l/s
1000 200 300 400 500 600 700 800
Performance - 200mm 3 Speed
Dimensions - Simx Inline
Centrifugal 3 Speed Fan
DIMENSION INFORMATION (MM)
Simx Inline Centrifugal 3 Speed Fan
53Simx Limited | www.simx.co.nz | sales@simx.co.nz
SIMX INLINE CENTRIFUGAL 3 SPEED FANSHIGH PERFORMANCE MODELS
Duct Size Model Performance Order Code
100mm MAN100 49 l/s, 176m3/hr FAN0361
125mm MAN125 61 l/s, 220m3/hr FAN0360
150mm MAN150 124 l/s, 445m3/hr FAN0330
200mm MAN200 208 l/s, 750m3/hr FAN0467
250mm MAN250 280 l/s, 1010m3/hr FAN0358
315mm MAN315 360 l/s, 1300m3/hr FAN0357
315mm MAN315L 472 l/s, 1700m3/hr FAN0356
• Suitable for a variety of domestic and commercial applications, these inline
centrifugal fans provide extremely high performance with a choice of sizes.
• Supported by a 2 year warranty.
Please note: Can be used for supply/extract.
Model A B C D E
MAN100 250 100 136 50 70
MAN125 250 125 147 60 60
MAN150 340 150 280 50 75
MAN200 340 200 280 50 75
MAN250 341 249 230 30 30
MAN315 405 315 275 30 30
MAN315L 405 315 275 30 30
DIMENSION INFORMATION (MM)
Dimensions - Simx 150mm Inline Fan
Simx 150mm Inline Fan
54
SIMX INLINE CENTRIFUGAL FANSHIGH PERFORMANCE MODELS
Model MAN100 MAN125 MAN150 MAN200 MAN250 MAN315 MAN315L
Voltage/Freq (50hz) 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V
Fan Performance49 l/s,
176m³/hr
61 l/s,
220m³/hr
124 l/s,
445m³/hr
208 l/s,
750m³/hr
280 l/s,
1010m³/hr
360 l/s,
1300m³/hr
472 l/s,
1700m3/hr
Fan Wattage 32W 31W 57W 105W 170W 176W 318W
Maximum Pressure 153 Pa 143 Pa 320 Pa 418 Pa 500 Pa 590 Pa 720 Pa
Current (A) 0.14 0.13 0.26 0.47 0.76 0.77 1.39
Fan Speed (min -1) 2500 RPM 2490 RPM 2450 RPM 2500 RPM 2580 RPM 2387 RPM 2433 RPM
Sound Level* 38 dB(A) 38 dB(A) 50 dB(A) 47 dB(A) 48 dB(A) 52 dB(A)
Max Operating Temp 60°C 60°C 50°C 70°C 50°C 60°C 40°C
* dB(A) - measured 1m free field.
TECHNICAL SPECIFICATION & PERFORMANCE DATA
200mm
Volume l/s
Volume m3/h
0
50
100
150
200
250
300
350
400
450
0 50 100 150 200 250
0 100 200 300 400 500 600 700 800 900
Sta
tic
Pre
ssu
re (
Pa
)
Performance - MAN200 Performance - MAN250 Performance - MAN315 & MAN315L
250mm
0
50
100
150
200
250
300
350
400
450
500
0 50 100 150 200 250 300
0 200 400 600 800 1000
Volume l/s
Volume m3/h
Sta
tic
Pre
ssu
re (
Pa
)
MAN315
MAN315L
0
100
200
300
400
500
600
0 50 100 150 200 250 300 350 400
0 200 400 600 800 1000 1200 1400
Volume l/s
Volume m3/h
Sta
tic
Pre
ssu
re (
Pa
)
Performance - MAN100 Performance - MAN125 Performance - MAN150
100mm
Volume l/s
Volume m3/h
0
20
40
60
80
100
120
140
160
0 10 20 30 40 50
0 20 40 60 80 100 120 140 160 180
Sta
tic
Pre
ssu
re (
Pa
)
125mm
Volume l/s
Volume m3/h
0
20
40
60
80
100
120
140
160
0 50 100 150 200 250
0 10 20 30 40 50 60 70
Sta
tic
Pre
ssu
re (
Pa
)
150mm
Volume l/s
Volume m3/h
0
50
100
150
200
250
300
350
0 50 100 150 200 250 300 350
0 20 40 60 80 100 120
Sta
tic
Pre
ssu
re (
Pa
)
400
55Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Performance Order Code
150mm WVILP150-1 124 l/s, 445m3/hr FAN0829
150mm WVILP150-3 124 l/s, 445m3/hr FAN0830
• Suitable for a variety of domestic and commercial applications, this inline
centrifugal fan offers high performance with a low profi le design to enable
this unit to be installed in confi ned spaces.
• Supported by a 2 year warranty.
DIMENSION INFORMATION (MM)
Model A B C D E
WhisperVent Low Profile 313 168 148 340 218
Dimensions
A
E
B
D
Ø C
Simx 150mm WhisperVent low profile
56
SIMX WHISPERVENT INLINE CENTRIFUGAL FANSLOW PROFILE MODELS
Model
Sound Power Levels Lw (A)
Octave band centre frequency in Hz dB(A) @ 3m
63 125 250 500 1k 2k 4k 8k
FAN0830 - Speed 1 - 20 34 43 43 44 40 30 30
FAN0830 - Speed 2 - 26 40 51 51 52 45 38 36
FAN0830 - Speed 3 - 40 42 62 64 64 59 45 43
FAN0829 57 61 68 67 65 64 59 53 43
SOUND POWER LEVEL
ModelFan
SpeedFan Performance
Norm Fan
Speed (RPM)
Single Phase
Nom Watts Nom Amps
FAN0830 1 72 l/s, 260m³/hr 1440 50 0.22
FAN0830 2 102 l/s, 367m³/hr 1860 56 0.24
FAN0830 3 124 l/s, 445m³/hr 2460 80 0.36
FAN0829 1 124 l/s, 445m³/hr 2450 80 0.36
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Performance - FAN0829 & FAN0830
400
300
200
100
Sta
tic
Pre
ssu
re P
a
28 56 83 111 139 167 194 222 250 278
Volume (l/s)
100 200 300 400 500 600 700 800 900 1000Volume (m3/hr)
12
3FAN0829
57Simx Limited | www.simx.co.nz | sales@simx.co.nz
BAP Plate Mounted Fan
• External rotor motorised impeller
• Sickle shaped low sound impeller
• Speed controllable
• IP44 minimum motor protection
• Sealed for life ball bearings
• Integral inlet wireguard
The BAP series are plate mounted extract fans for general purpose applications. They are
suitable for extract air situations with moderate air volumes and low pressures.
The motorised impellers are effi cient, smooth running and have excellent low sound
characteristics. Standard airfl ow in Form A. Form B on request.
Speed can be controlled by electronic or autotransformer voltage regulation.
ELECTRICAL & ACOUSTIC DATA
Model
Speed
(rev/
min)
230V/50Hz/1Φ Sound
Pressure
Level
(dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor
Input
(W)
Full Load
Current
(A)
Max
Temp
(ºC)
63 125 250 500 1k 2k 4k 8k
BAP2541 1390 69 0.53 50 40 62 59 61 60 58 56 54 43 FAN3638
BAP3041 1250 75 0.32 50 38 66 64 59 55 52 50 46 38 FAN3640
BAP3541 1340 165 0.73 60 42 76 68 61 57 57 55 52 46 FAN3647
BAP4041 1430 160 0.73 40 49 76 72 66 65 65 61 57 52 FAN3648
BAP4541 1310 490 2.36 60 48 75 68 64 63 63 63 59 57 FAN4315
BAP5041 1300 680 3 60 47 77 72 63 61 61 60 58 52 FAN3656
BAP5661 895 410 1.8 60 46 68 75 61 62 64 58 51 49 FAN3661
BAP6361 860 600 2.62 50 46 71 68 63 64 62 58 52 52 FAN4074
DIMENSION INFORMATION (MM)
Model A B C D E Weight kg
BAP2541 370 320 250 260 90 4
BAP3041 430 380 305 325 90 5
BAP3541 485 435 350 360 90 6
BAP4041 540 490 400 410 110 9
BAP4541 575 535 450 460 110 10
BAP5041 655 615 500 510 115 14
BAP5661 725 670 560 575 115 16
BAP6361 805 750 630 645 125 21
A
B
C D
E
BAP PLATE MOUNTED AXIAL EXTRACT FANSSIZES 250MM - 630MM SINGLE PHASE
AIRFLOW
58
PERFORMANCE DATA
00
220
440
660
880
1100
1120
1140
1160
1180
00 2250 5500 7750 11000 11250 11500 11750 22000 22250 22500 22750 33000
BAP2541
BAP5041
BAP3041
BAP3541
BAP4041
BAP4541
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
00
220
440
660
880
1100
1120
1140
00 5500 11000 11500 22000 22500 33000 33500 44000
BAP5661
BAP6361
59Simx Limited | www.simx.co.nz | sales@simx.co.nz
BRC-Q Roof Mounted Fan
• Ziehl-Abegg Vpro low sound aerofoil impeller
• Higher Effi ciency
• No tonal noise
• UV stabilised Rovel polymer cowling
• Speed controllable
• IP44 minimum motor protection
• Sealed for life ball bearings
PERFORMANCE DATA
The BRC-Q series are centrifugal extract fans for roof curb installation. Fan cowling
is manufactured from tough UV-stabilized polymer.
The Ziehl-Abegg motorised impellers are manufactured from high performance
composite material for effi ciency and smooth running. Impellers are optimised
for low tonal noise giving excellent overall sound characteristics.
Speed can be controlled by electronic or autotransformer voltage regulation.
Sizes 190 and 220 are fi tted with three speed motors.
DIMENSION INFORMATION (MM)
Model A* B* C D EWeight
kg
BRC1921Q 280 180 320 205 40 5
BRC2221Q 400 300 480 253 72 8
BRC2521Q 400 300 480 253 72 11
BRC2841Q 400 300 480 253 72 12
BRC3141Q 475 375 600 259 72 14
BRC3541Q 550 450 710 355 75 18
BRC4041Q 550 450 710 355 75 20
BRC4541Q 650 550 844 390 75 31
BRC4561Q 650 550 844 390 75 29
BRC5041Q 650 550 844 480 75 41
BRC5061Q 650 550 844 480 75 37
BRC5661Q 750 650 1030 550 75 43
* Upstand Construction Details
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400
1921Q-L 1921Q-M
1921Q-H
2221Q-L
2221Q-M 2841Q
2221Q-H 2521Q
Volume Flow L/s
Sta
tic
Pre
ssu
re P
aBRC-Q ROOF MOUNTED CENTRIFUGAL EXTRACTFAN SIDE DISCHARGE - SIZES 190MM - 560MM SINGLE PHASE
60
ELECTRICAL & ACOUSTIC DATA
Model
Speed
(rev/
min)
230V/50Hz/1ΦSound
Pressure
Level
(dBA@3m)
Induct Sound Power Level
(dB re 10-12 Watts)
Order
CodeMotor
Input
(kW)
Full Load
Current
(A)
Max
Temp
(ºC)
63 125 250 500 1k 2k 4k 8k
BRC1921Q-H 2500 0.06 0.26 60 42 71 68 63 58 57 55 51 44 FAN4370
BRC1921Q-M 2010 0.05 0.25 60 37 69 66 60 51 51 50 48 35 FAN4376
BRC1921Q-L 1470 0.05 0.24 60 30 67 62 52 43 43 42 27 26 FAN4375
BRC2221Q-H 2560 0.1 0.45 60 44 76 69 62 61 57 56 53 49 FAN4377
BRC2221Q-M 2020 0.09 0.41 60 39 66 60 57 55 52 52 51 43 FAN4379
BRC2221Q-L 1480 0.08 0.38 60 35 61 61 48 51 53 47 41 37 FAN4378
BRC2521Q 2420 0.2 0.86 60 47 60 61 61 59 55 54 54 41 FAN3804
BRC2841Q 1360 0.11 0.53 60 39 59 70 60 61 55 51 53 43 FAN3546
BRC3141Q 1240 0.14 0.62 60 40 67 73 70 68 61 58 54 50 FAN3811
BRC3541Q 1390 0.27 1.3 60 42 66 62 57 54 50 46 38 38 FAN3814
BRC4041Q 1280 0.43 1.9 60 43 65 73 70 69 62 57 56 59 FAN3817
BRC4061Q 890 0.17 0.76 60 39 67 62 64 55 53 49 44 33 FAN3819
BRC4541Q 1230 0.62 2.8 60 47 68 77 74 73 65 62 58 56 FAN3821
BRC4561Q 920 0.3 1.4 60 41 61 70 66 65 57 54 49 46 FAN3823
BRC5041Q 1340 1.3 5.8 60 52 68 80 78 69 68 63 60 58 FAN3825
BRC5061Q 910 0.45 2.2 60 41 71 71 72 65 63 58 54 51 FAN3827
BRC5661Q 860 0.66 3 60 45 74 74 71 62 61 56 53 49 FAN3830
5061Q
4561Q 4061Q
5041Q
5661Q 4541Q
4041Q
3541Q
3141Q
0
100
200
300
400
500
600
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Sta
tic
Pre
ssu
re P
a
Volume Flow L/s
PERFORMANCE DATA CONT.
61Simx Limited | www.simx.co.nz | sales@simx.co.nz
• External rotor motorised impeller
• Sickle shaped low sound impeller
• UV stabilised Rovel polymer or polyethylene cowling
• Speed controllable
• IP44 minimum motor protection
• Sealed for life ball bearings
The BRA series are roof mounted extract fans for general purpose applications.
They are suitable for extract air situations with moderate air volumes and low
pressures. The motorised impellers are effi cient, smooth running and have
excellent low sound characteristics.
Speed can be controlled by electronic or autotransformer voltage
regulation.
Cowl material is UV stabilised Rovel polymer or polyethylene.
Supply air versions are available.
DIMENSION INFORMATION (MM)
Model A* B* C D E Weight kg
BRA2541 400 300 480 253 50 8
BRA3041 460 360 600 259 50 14
BRA3541 530 430 710 355 50 18
BRA4041 580 480 710 355 50 18
BRA4541 630 530 844 390 50 31
Model A* B* C D E Weight kg
BRA5041 660 560 970 435 50 36
BRA5661 730 630 1150 470 50 41
BRA6361 810 750 1150 470 50 43
BRA Roof Mounted Fan
BRA ROOF MOUNTED AXIAL FAN SIDE DISCHARGESIZES 250MM - 630MM SINGLE PHASE
C
A
B
D
E
* Upstand Construction Details
62
ELECTRICAL & ACOUSTIC DATA
Model
Speed
(rev/
min)
230V/50Hz/1ΦSound
Pressure
Level
(dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor
Input
(W)
Full Load
Current
(A)
Max
Temp
(ºC)
63 125 250 500 1k 2k 4k 8k
BRA2541 1390 69 0.53 50 40 62 59 61 60 58 59 54 43 FAN3751
BRA3041 1250 75 0.32 50 38 57 56 64 63 59 59 56 48 FAN3753
BRA3541 1340 165 0.73 60 42 59 56 60 63 63 64 62 53 FAN3759
BRA4041 1430 160 0.73 40 49 64 61 62 67 66 67 63 54 FAN3762
BRA4541 1310 490 2.36 60 48 80 78 77 70 69 69 66 61 FAN3769
BRA5041 895 410 1.8 60 46 66 62 68 70 70 70 67 61 FAN3774
BRA5661 860 600 2.62 50 46 63 60 69 67 67 69 64 56 FAN3780
BRA6361 900 520 2.6 40 58 66 63 66 68 69 68 68 59 FAN3786
0
50
100
150
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
0
50
100
150
0 500 1000 1500 2000 2500 3000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
35412541
3041 4041
4541 5041
50615661
6361
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
PERFORMANCE DATA
63Simx Limited | www.simx.co.nz | sales@simx.co.nz
• Ziehl-Abegg Vpro low sound aerofoil impeller.
• Higher Effi ciency.
• Low tonal noise.
• Galvanised sheet steel cowling.
• Speed controllable.
• IP54 minimum motor protection.
• Sealed for life ball bearings.
The BRM-Q series are centrifugal extract fans for roof curb installation. Fan cowling is
manufactured from galvanised sheet steel.
The Ziehl-Abegg motorised impellers are manufactured from high performance composite
material for effi ciency and smooth running. Impellers are optimised for low tonal noise
giving excellent overall sound characteristics.
Speed can be controlled by electronic or autotransformer voltage regulation.
DIMENSION INFORMATION (MM)
Model A B C D EWeight
kg
BRM3541Q 550 450 715 495 50 24
BRM4041Q 550 450 715 495 50 32
BRM4061Q 550 450 715 495 50 32
BRM4541Q 650 550 1030 535 50 46
BRM4561Q 650 550 1030 535 50 46
BRM5041Q 650 550 1030 535 50 52
BRM5061Q 650 550 1030 535 50 48
BRM5661Q 650 550 1030 535 50 50
Model A* B* C D EWeight
kg
BRA5061 750 650 970 435 50 35
BRA5041 750 650 970 435 50 36
BRA5661 850 750 1150 470 50 41
BRA6361 850 750 1150 470 50 43
BRM-Q ROOF MOUNTED CENTRIFUGAL EXTRACT FAN VERTICALDISCHARGE SIZES 355MM - 560MM SINGLE PHASE
BRM Roof Mounted Fan
64
ELECTRICAL & ACOUSTIC DATA
Model
Speed
(rev/
min)
230V/50Hz/1ΦSound
Pressure
Level
(dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor
Input
(W)
Full Load
Current
(A)
Max
Temp
(ºC)
63 125 250 500 1k 2k 4k 8k
BRM3541Q 1390 0.27 1.3 60 42 66 62 57 54 50 46 38 38 FAN3836
BRM4041Q 1280 0.43 1.9 60 43 65 73 70 69 62 57 56 59 FAN3839
BRM4061Q 890 0.17 0.76 60 39 67 62 64 55 53 49 44 33 FAN2943
BRM4541Q 1230 0.62 2.8 60 47 68 77 74 73 65 62 58 56 FAN3842
BRM4561Q 920 0.3 1.4 60 41 61 70 66 65 57 54 49 46 FAN2958
BRM5041Q 1340 1.3 5.8 60 52 68 80 78 69 68 63 60 58 FAN3845
BRM5061Q 910 0.45 2.2 60 41 71 71 72 65 63 58 54 51 FAN3847
BRM5661Q 860 0.66 3 60 45 74 74 71 62 61 56 53 49 FAN3000
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
Volume Flow L/s
Sta
tic
Pre
ssu
re P
a
PERFORMANCE DATA
65Simx Limited | www.simx.co.nz | sales@simx.co.nz
Model A B C D E F
100 M 99 218 26 166 26 218
100 XL 99 246 26 161 26 213
125 M 124 218 27 142 27 196
125 XL 124 246 26 151 26 203
150 M 149 286 25 152 25 202
150 XL 14 336 29 171 26 226
200 M 199 336 30 148 27 205
Model A B C D E F
200 L 199 336 30 174 27 231
250 M 249 336 30.5 119.5 27 177
250 L 249 336 30.5 144.5 27 202
315 M 314 408 32.5 160 27 220
315 L 314 408 37.5 160.5 27 225
PERFORMANCE DATA
K series is designed for installation in ducts and the KV is designed to be used as a wall mounted
duct-connected extract fan. All the K/KV-fans have a minimum 25 mm long spigot connections.
The fans have backward-curved blades and external rotor motors. To simplify installation the
K-fan has a fi xing bracket together with screws for mounting the bracket included as standard.
• Speed-controllable.
• Integral thermal contacts.
• Can be installed in any position.
• Can be installed outdoors.
• Maintenance-free and reliable.
DIMENSION INFORMATION (MM)
K-SERIES INLINE CENTRIFUGAL FANSMETAL
K-Series Inline Centrifugal Fan
66
FAN5454 FAN5453 FAN5456 FAN5455 FAN5678 FAN5457
Model 200 M 200 L 250 M 250 L 315 M 315 L
Voltage/Frequency V/50 Hz 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~
Power W 106/102 145/143 104/103 145/148 201 318/310
Current A 0.463/0.453 0.631/0.628 0.453/0.451 0.463/0.453 0.882 1.39/1.35
max air flow m3/s 0.216/0.219 0.268/0.272 0.216/0.219 0.272/0.273 0.344/0.351 0.48
R.P.M min -1 2551 2555 2566/2575 2562/2556 2520/2506 2318/2367
max temp of
transported airºC 70 50 70 70 51 51
when speed
controlledºC 70 50 70 70 51 45
Sound pressure level
@ 3mdB(A) 51/49 48/49 49/51 43/47 46.5/43 50/51
Weight kg 4.2/3.9 4.8/4.5 40.0/3.9 4.6 5.5 6.6
Enclosure
class, motorIP 44 IP 44 IP 44 IP 44 IP 44 IP 44
Capacitor uF 3 3.5 3 3.5 5 7
Motor protection Integral Integral Integral Integral Integral Integral
Speed control,
five-stepTransformer RE 1.5 RE 1.5 RE 3 RE 3 RE 1.5 RE 1.5
FAN5451 FAN5452
Model 100 M 100 XL 125 M 125 XL 150 M 150 XL
Voltage/Frequency V/50 Hz 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~
Power W 29.9 58.6 29.1 62 61 104
Current A 0.171 0.253 0.172 0.271 0.264 0.458
max air flow m3/s 0.051 0.074 0.057 0.0978 0.122 0.199
R.P.M min -1 2443 2425 2483 2390 2412 2567
max temp of
transported airºC 70 70 70 70 70 70
when speed
controlledºC 70 70 70 70 70 70
Sound pressure level
@ 3mdB(A) 38 48 34 50 42 55
Weight kg 2.5 2.5 2.5 2.5 3.5 4.5
Enclosure
class, motorIP 44 IP 44 IP 44 IP 44 IP 44 IP 44
Capacitor uF - 2 - 2 2 3
Motor protection Integral Integral Integral Integral Integral Integral
Speed control,
five-stepTransformer RE 1.5 RE 1.5 RE 1.5 RE 1.5 RE 1.5 RE 1.5
ELECTRICAL, TECHNICAL & PERFORMANCE DATA
67Simx Limited | www.simx.co.nz | sales@simx.co.nz
ACM250 Mixed Flow Fan
The Vent-Axia ACM range of Mixed Flow Inline fans are designed for use
with both rigid and fl exible ducting.
They offer two and half times the pressure of conventional axial fans and are
dimensionally more compact (making them ideal for many ducted applications).
The impeller blade design with guide vanes provides optimum pressure
characteristics. The ACM Mixed Flow inline fan can operate in both horizontal and
vertical positions.
Duct Size (mm) Description Order Code
250 ACM250 Mixed Flow Fan FAN2239
315 ACM315 Mixed Flow Fan FAN2241
• Simple Installation.
• Diagonal impeller with stator.
• Galvanised metal housing.
• Integrated thermal switch.
• Designed to meet IP54.
• Optimise fan performance by using an approved Vent-Axia controller.
• Supported by a 4 year warranty.
Motor
All motors are fi tted with Standard Thermal Overload Protection. (S.T.O.P.).
Motors are speed controllable. Designed for ambient temperatures up to +50°C.
All sizes with capacitor run motors.
All sizes are Class I appliances. Supply voltage 220-240V/1/50Hz.
VENT-AXIA INLINE MIXED FLOW FANSACM METAL MODELS
Controller
Surface mounted providing variable speed control with an On/Off.
68
278250
307
280
ACM250 Mixed Flow Fan ACM315 Mixed Flow Fan
315
ACOUSTICS SOUND POWER LEVEL DB(A)
Model Hz 63 125 250 500 1K 2k 4K 8K
ACM250
Inlet - 45 57 64 67 66 63 54
Outlet - 56 64 72 74 71 64 57
Breakout - 41 46 47 49 48 42 38
ACM315
Inlet - 49 63 68 70 69 66 57
Outlet - 51 69 73 75 73 66 58
Breakout - 44 46 49 53 51 49 45
Model Performance l/s @ PaWatts
W
Amps
A
Nominal
RPM
Sound
dB(A) @3m
Pa 0 25 50 100 150 200 250 300 400
ACM250 l/s 450 440 430 405 378 347 314 118 37 145 0.8 2720 52
ACM315 l/s 653 639 630 605 577 545 505 453 150 270 1.2 2820 56
PERFORMANCE DATA
DIMENSION INFORMATION (MM)
69Simx Limited | www.simx.co.nz | sales@simx.co.nz
DIMENSION INFORMATION (MM)
110mm
69mm
3
C
A
B
Connection
1. Electrical connection must be made internally
(Junction Box is only suitable for internal use).
NOTE: All fan fl ow rates quoted are free air delivery.
SIMX EXTERNAL WALL MOUNTED FANS3 SPEED EXTRACT MODELS
*Also available in a Supply Air option
Duct Size Fan Type Air Performance Order Code
150mm Axial Extract* 73 l/s, 263m3/hr FAN2303
150mm Ctr’fgl (190 Motor) Extract 109 l/s, 392m3/hr FAN2301
150mm Ctr’fgl (220 Motor) Extract 133 l/s, 480m3/hr FAN2302
Duct Size Fan Type AirPerformance
(High Speed)Order Code
150mm Ctr’fgl (190 Motor) Extract 113 l/s, 408m3/hr FAN2316
150mm Ctr’fgl (220 Motor) Extract 136 l/s, 493m3/hr FAN2317
• Designed for use in residential and light commercial applications
where a high performance, low noise solution is required.
• Specifi c applications include apartments where space is limited.
• Supported by a 2 year warranty.
• Designed for use in residential and light commercial applications
where a high performance, low noise solution is required.
• Three speed models enable further fl exibility in a variety of applications.
• Specifi c applications include apartments where space is limited.
• Supported by a 2 year warranty.
Fan Assembly - Line Drawing
150mm Centrifugal (190 Motor)
Model A B C
150mm Axial 369 110 305
150mm Ctr’fgl (190 Motor) 369 110 305
150mm Ctr’fgl (220 Motor) 369 110 305
70
SIMX EXTERNAL WALL MOUNTED FANSEXTRACT MODELS
Order CodeMotor Size
(mm)Description
Fan Performance Watts @
230VAmps
Static
Pressure (Pa)
Sound Level
(dB(A) @ 3m)m³/hr l/s
FAN2303 150 Axial 263 73 48 0.29 80 48
FAN2301 150Centrifugal 190
Motor (1 Speed)392 109 65 0.28 280 60
FAN2302 150Centrifugal 220
Motor (1 Speed)423 118 96 0.42 380 61
FAN2316 150Centrifugal 190
Motor (3 Speed)
High Speed 408 113 65 0.28 280 60
Medium Speed 340 94 57 0.25 250 56
Low Speed 277 77 55 0.24 200 46
FAN2317 150Centrifugal 220
Motor (3 Speed)
High Speed 493 136 96 0.42 380 61
Medium Speed 408 113 69 0.34 340 56
Low Speed 340 94 60 0.31 280 50
TECHNICAL SPECIFICATION & PERFORMANCE DATA
FAN2303 150mm AXIAL
FAN2301 150mm CENTRIFUGAL (190 Motor)
FAN2302 150mm CENTRIFUGAL (220 Motor)
01
02
03
FAN2316 150mm 3 SPEED CENTRIFUGAL (190 Motor)
FAN2317 150mm 3 SPEED CENTRIFUGAL (220 Motor)
01
02
0
50
100
150
200
250
300
350
400
50 1000 150
Airflow (L/s)
Pre
ssur
e (P
a) 02
0
50
100
150
200
250
300
350
400
50 1000 150
Airflow (L/s)
Pre
ssur
e (P
a)
01
02
03
01
71Simx Limited | www.simx.co.nz | sales@simx.co.nz
Connection
1. Electrical connection can be made inside or outside the roof space.
* NOTE: All fan fl ow rates quoted are motor performance in free air.
THRU ROOF FAN SYSTEM MODELS
WITH FLASHING & GALVANISED STEEL TUBE
Duct Size Fan Type Air Performance Order Code
150mm Ctr’fgl Extract 153 l/s, 550m3hr FAN0529
150mm Ctr’fgl 3-spd Extract 153 l/s, 550m3hr FAN1002
150mm Axial - Whisper Extract 89 l/s, 320m3/hr FAN1009
150mm Axial Extract 75 l/s, 270m3/hr FAN0531
150mm Axial - Whisper Supply 75 l/s, 270m3/hr FAN0533
Duct Size Description Fan Type Performance* Order Code
150mm Ultra Ctr’fgl 153 l/s, 550m3/hr FAN0535
150mm Hyper Hyper 75 l/s, 270m3/hr DCT0189
• High quality aluminium cowl construction, with fan incorporated, for longevity of operation.
• Includes Flashing for metal based roofs, an optional lead fl ashing is available for concrete
tile roofs (DCT0190) at an additional cost.
• Supported by a 2 year warranty.
• High quality aluminium cowl construction, with fan incorporated, for longevity of operation.
• Supported by a 2 year warranty.
Duct Size Fan Type Air Performance Order Code
150mm Ctr’fgl Extract 153 l/s, 550m3hr FAN0530
150mm Ctr’fgl 3-spd Extract 153 l/s, 550m3/hr FAN0967
150mm Axial - Whisper Extract 89 l/s, 320m3/hr FAN1060
150mm Axial Extract 75 l/s, 270m3/hr FAN0532
150mm Axial Supply 75 l/s, 270m3/hr FAN0534
150mm H/D Axial Extract 75 l/s, 270m3/hr FAN0739
150mm H/D Ctr’fgl Extract 153 l/s, 550m3/hr FAN0740
H/D = Heavy Duty cowl used in these kits.
• High quality aluminium cowl construction, with fan incorporated for longevity of operation.
• Includes Flashing for metal based roofs, an optional lead fl ashing is available for concrete tile
roofs (DCT0190) at an additional cost.
• Supported by a 2 year warranty.
150mm Axial - Whisper
150mm Axial - Whisper
150mm Hyper Fan System
72
THRU-ROOF MOUNTED FANSTHRU ROOF FAN COWL MODELS
A
B
C
Model A B C
FAN0529 - FAN1002 275 170 -
FAN1009 275 170 -
FAN0531- FAN0533 275 170 -
FAN0530 - FAN0967 275 170 500
FAN1060 275 170 500
FAN0532 - FAN0534 275 170 500
FAN0739 - FAN0740 275 170 500
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Dimensions - Thru Roof Fans
0
50
100
150
200
250
300
350
0 50 100 150 200
Pres
sure
(Pa)
FAN0529/FAN0530/FAN0740
0
10
20
30
40
50
60
70
80
90
0 20 40 60 80 100 120
Pres
sure
(Pa)
Air ow (L/s)
FAN0531/FAN0532/FAN0739
FAN1009/FAN1060
0
20
40
60
80
100
120
140
160
0 50 100 150
Pres
sure
(Pa)
Air ow (L/s)
0
10
20
30
40
50
60
70
80
90
0 20 40 60 80 100 120
Pres
sure
(Pa)
Air ow (L/s)
FAN0533/FAN0534
Model
FAN0529
FAN0530
FAN0740
FAN1002
FAN0967
FAN0531
FAN0532
FAN0739
FAN0533
FAN0534
FAN1009
FAN1060
Supply Voltage 220-240VAC 220-240VAC 220-240VAC 220-240VAC 220-240VAC
Fan Centrifugal Centrifugal Axial Axial Axial - Whisper
Fan Performance 153 l/s, 550m3/hr 153 l/s, 550m3/hr 75 l/s, 270m3/hr 75 l/s, 270m3/hr 89 l/s, 320m3/hr
Fan Wattage 58W 58W 44W 44W 46W
Maximum Pressure 320 Pa 320 Pa 80 Pa 130 Pa 130 Pa
Fan Speed 2500 RPM 2500 RPM 2850 RPM 2850 RPM 2750 RPM
Sound Level @ 1m 62 dB(A) 62 dB(A) 55 dB(A) 55 dB(A) 38 dB(A)
Operating Temp -25 - +50°C -25 - +50°C -20 - +80°C -20 - +80°C -20 - +80°C
IP Rating IPX4 IPX4 IPX2 IPX2 IPX2
DIMENSION INFORMATION (MM)
73Simx Limited | www.simx.co.nz | sales@simx.co.nz
• Kit comes complete with a ASA plastic cowl construction, with or without fan incorporated,
mounting tubes, aquaseal roof fl ashing & power lead fl ashing.
• The orientation of the fan section can be reversed to facilitate extract or supply.
• Supported by a 2 year warranty.
• High quality ASA plastic cowl construction, with fan incorporated, for longevity of operation.
• The orientation of the fan section can be reversed to facilitate extract or supply.
• Supported by a 2 year warranty.
COMMERCIAL THRU ROOF FAN KITS
Duct Size Description Fan Type Performance Order Code
250mm Commercial Cowl - - DCT2238
250mm Commercial Fan Cowl Ctr’fgl 178 l/s, 640 m3/hr FAN2120
250mmCommercial Fan Cowl
- High PerformanceCtr’fgl 265 l/s, 954 m3/hr FAN2121
250mm Filter Ring - - DCT2254
250mm Insect Mesh - - DCT2253
Duct Size Description Fan Type Performance Order Code
250mm Commercial Kit - - DCT2241
250mm Commercial Fan Kit Ctr’fgl 178 l/s, 640 m3/hr FAN2122
250mmCommercial Fan Kit
- High PerformanceCtr’fgl 265 l/s, 954 m3/hr FAN2123
250mm Filter Ring - - DCT2254
250mm Insect Mesh - - DCT2253
250 mm Hyper Fan System
250mm Commercial
Fan Kit
THRU-ROOF MOUNTED FANSCOMMERCIAL THRU ROOF FAN
74
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model FAN2120/FAN2122 FAN2121/FAN2123
Supply Voltage 220-240VAC 220-240VAC
Fan Centrifugal Centrifugal
Fan Performance 178 l/s, 640 m3/hr 265 l/s, 954 m3/hr
Fan Wattage 75W 135W
Maximum Pressure 300 Pa 545 Pa
Fan Speed 2600 RPM 2650 RPM
Sound Level @ 1m 72 dB(A) 70 dB(A)
Operating Temp -25 - +40° -25 - +60°
Model A B C
250mm 400 400 248
B
C
A
Dimensions - Thru Roof
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
350
300
250
200
150
100
50
0
0 25 50 75 100 125 150 175 200
Performance - FAN2120/FAN2122
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
Performance - FAN2121/FAN2123
COWL ON Test ConditionsNoise Rating
dB(A)125 250 500 1000 2000 4000 8000
SupplyInlet + CR 56 65.7 67.5 69.0 62.9 60.1 51.9 43.2
Discharge 55 61.1 62.0 67.8 62.4 61.8 60.7 43.9
ExtractInlet 54 62.4 62.3 67.1 61.9 60.6 58.1 48.5
Discharge + CR 54 67.2 68.5 66.1 61.4 60.9 51.2 42.3
COWL ON Test Conditions Noise Rating 125 250 500 1000 2000 4000 8000
SupplyInlet + CR 61 73.3 76.5 74.7 70.8 65.5 60.2 51.1
Discharge 60 68.9 71.5 72.4 69.9 67.9 65.5 56.1
ExtractInlet 58 69.9 72.8 69.5 68.3 65.6 62.7 54.6
Discharge + CR 60 76.2 78.1 71.7 69.5 66.8 59.0 50.2
ACOUSTIC PERFORMANCE - FAN2121/FAN2123
ACOUSTIC PERFORMANCE - FAN2120/FAN2122 Please note: CR Represents - Casing Radiation
DIMENSION INFORMATION (MM)
75Simx Limited | www.simx.co.nz | sales@simx.co.nz
• These models are suitable for use in public areas such as lavatories, factories, schools railways
and motorway service stations and are designed for heavy usage and unsupervised areas.
• Supported by a 2 year warranty.
Model Cover Colour Switching Performance Order Code
MAN/M-88A ABS Thermoplastic White Auto 56 l/s, 200m3/hr FAN2902
MAN/A-89 3mm Aluminium White Auto 108 l/s, 388m3/hr FAN4396
MAN/A-89B 3mm Aluminium Black Auto 108 l/s, 388m3/hr FAN4397
MAN/E-88A2mm Steel
Porcelain EnamelWhite Auto 130 l/s, 470m3/hr FAN2903
MANROSE CLASSIC HAND DRYERSPUBLIC AREAS/HEAVY USAGE APPLICATIONS
Manrose MAN/E-88A
Manrose MAN/M-88A
76
Model A B C
MAN/M-88A 225 275 160
MAN/A-89 225 275 160
MAN/E-88A 284 248 202
Model MAN/M-88A MAN/A-89 MAN/E-88A
Power 220 - 240V 220 - 240V 220 - 240V
Cover ABS Thermoplastic 3mm AluminiumSteel 2mm Porcelain
Enamel
Colour White White, Silver, Black White
Fan Performance 56 l/s, 200m³/hr 108 l/s, 388m3/hr 130 l/s, 470m³/hr
OperationNo touch infra-red
detection
No touch infra-red
detection
No touch infra-red
detection
Power 1.5kW @ 240V 2.0kW @ 240V 2.4kW @ 240V
Sound Level 54 dB(A) 69 dB(A) 70 dB(A)
Weight 3.3kg 4.7kg 7.5kg
TECHNICAL SPECIFICATION
Depth
A
C
B
Dimensions - MAN/M-88A, A-89, A-89S A-89B
Depth
A
B
C
Dimensions - MAN/E-88A
DIMENSION SPECIFICATION (MM)
77Simx Limited | www.simx.co.nz | sales@simx.co.nz
HIGH SPEED DRYERSFAST DRY TIME
• Low energy consumption.
• Outstanding performance.
• Chip control technology and infrared sensor.
• Supported by a 2 year warranty.
Model Cover Colour Switching Air Volume Order Code
Down Draft Dryer ABS White Auto 90 m/s FAN5653
Down Draft Dryer ABS Silver Auto 90 m/s FAN5654
Down Draft Dryer Silver
Down Draft Dryer White
• Low energy consumption.
• Outstanding performance.
• In-built drip tray.
• Supported by a 2 year warranty.
Model Cover Colour Switching Air Velocity Order Code
Hand Dryer
Side Draft
Stainless
SteelSilver Auto 95 m/s FAN5655
HAND DRYERSSIDE DRAFT
Hand Dryer Side Draft - Stainless Steel
78
Model A B C
High Speed Dryer 248 250 178
DIMENSION SPECIFICATION (MM)
Model High Speed Dryer
Power 220 - 240V
Cover ABS
Filter Yes
Auto Shut Off 60 Seconds
Colour White or Silver
Air Speed 90 m/s
Sound Level 36dB @ 1m
Switch Heat Off Yes
Drying Distance 12 cm (+/- 3cm)
Power 750W/1100W
Dry Time 10 - 15 Seconds
Weight 3.2 kg
TECHNICAL SPECIFICATION - HIGH SPEED DRYER
CA
B
Model Side Draft
Power 220 - 240V
Cover Stainless Steel
Auto Shut Off 30 Seconds
Auto Heat Off > 25O C
Filter Yes
Air Speed 95 m/s
Sound Level 36dB @ 1m
Power 800W/1650W
Dry Time 10 - 15 Seconds
Weight 11.2 kg
Rating IPX4
TECHNICAL SPECIFICATION - SIDE DRAFT
Model A B C
Side Draft 300 730 222
DIMENSION SPECIFICATION (MM)
AC
B
79Simx Limited | www.simx.co.nz | sales@simx.co.nz
Duct Size Model Switching Performance Order Code
120mm Frame Fan Standard 38 l/s, 138m³/hr FAN0397
150mm Frame Fan Standard 89 l/s, 320m³/hr FAN1043
Duct Size Description Order Code
120mm Finger Guard for FAN0397 - Metal FAN0412
120mm Filter Guard for FAN0397 FAN0413
150mm Finger Guard for FAN1043 FAN0841
ACCESSORIES
• This frame fan is designed for use in computer rooms or applications
where the introduction of cool air is required for small enclosed spaces.
• The ball bearing motor prolongs the life of the motor.
• Supported by a 2 year warranty.
Frame Fan 125mm
Model Frame Fan 125 Frame Fan 150
Power 220 - 240V 220 - 240V
Fan Performance 38 l/s, 138m³/hr 89 l/s, 320m³/hr
Fan Wattage 15W 38W
Maximum Pressure 62Pa 135Pa
Fan Speed 2650 RPM 2650 RPM
Sound Level 43 dB(A) 46 dB(A)
Max. Operating Temp 80°C 70°C
IP Rating IPX4 IPX2
Model A B C D
Frame Fan 125 120 120 105 40
Frame Fan 150 172 150 160 51
B
D A
C
Dimensions - Frame Fan
0 50 100 150 200
Performance - 125mm Frame Fan
72 144 180 216 252 288 324 36010836
70 90
Performance - 150mm Frame Fan
DIMENSION INFORMATION (MM)TECHNICAL SPECIFICATION
Frame Fan Accessories
80
SPECIALISED FANSFRAME FAN MODEL
Switching Options
1. Standard - operates from remote switch (not supplied).
NOTE: All fan fl ow rates quoted are free air delivery.
Model Description Order Code
Time Air 7 Minute Fixed Timer (suits fans 20W-200W) FAN0372
• A fi xed fan timer that will automatically run the fan for approximately
7 minutes when fan is switched on for up to 5 mins.
• Fan runs on for approx 12 minutes when switched on for over 5 mins
Description Order Code
Fully Adjustable Run-On Fan Timer (suits fans 20W-350W) FAN2444
• Timing Switch 1 Sec to 90 Mins.
• Adjustable Run On Timer & Start Delay.
• Includes resistor for fans under 50W
Time Air - Fixed Fan Timer
Electronic Transformer
ELECTRONIC TRANSFORMERS
Model Description Order Code
ACTO TE0060 Electronic Transformer 12VAC 50kHz FAN2101
• This transformer must only be used with 12V lighting installations.
• Supports lamp wattages from 20W - 60W.
• Overload & short circuit protection with self resetting.
• Over temperature cut off.
• Dimmable with trailing and leading edge dimmers.
Description Order Code
SELV Isolating Transformer 12VAC FAN0436
• SELV isolating transformer is required for all low voltage fan installations.
• Can be used with low voltage 12V lighting.
• Supports lamp wattages from 20W - 50W.
• An iron core transformer.
• Thermally stable and shatter-proof plastic casings.
• Overload & short circuit protection with self resetting.
• Over temperature cut off.
• Dimmable with trailing and leading edge dimmers.
SELV Isolating Transformer 12VAC
ISOLATING TRANSFORMERS
Fully Adjustable Run-On Fan Timer
81Simx Limited | www.simx.co.nz | sales@simx.co.nz
FAN TIMERS
HUMIDISTAT CONTROLLER
Model Description Order Code
UT-H1 Humidistat Controller FAN6085
• Designed to maintain the relative humidity (RH) ina room by controlling
a ventilation device
• Dry and Damp Conditions setting.
• Switching Capacity 15 - 200WHumidistat Controller
Model Description Switching Method Order Code
1348 For XF/XP/WF 230/300 Fans* 2 Spd + Reverse FAN0155
1349 For XF/XP/WF 230/300 Fans* Adjust + Reverse FAN0156
1350 For any XF/XP/WF 230/300 Fans Adjustable FAN0157
PDL625F General Purpose up to 500W On-Off + Adjust FAN2104
FAN MOUNTING BRACKETS
• These adjustable fan mounting brackets, designed for use with the centrifugal fans.
• Supplied in pairs.
Duct Size Description Order Code
100-200mm Fan Mounting Bracket for 100 - 200mm FAN0015
250-315mm Fan Mounting Bracket for 250 - 315mm FAN0016
• A range of speed controllers with variable or 2 speed and reversible options.
• Models 1348 - 1350: Electrical load must be between 20 and 200 watts.
• FAN0154 - Single pattress mounting block for FAN0155/0156/0157.
*Not suitable for manual pull cord model fans.
Model Description Order Code
UT-T1 Touch Screen Automated Thermostat FAN5555
UT-M1 Mechanical Thermostat FAN5856
SPEED CONTROLLERS
FAN2104 General Purpose
100-200mm Fan Mounting Bracket
Mechanical Thermostat
Automated Thermostat• High quality, easy to use heat transfer thermostats.
• Electronic temperature sensor.
• FAN5555 is included in HeatTrans systems.
82
THERMOSTATS