Post on 12-Apr-2017
PRE-‐ENGINEERED STEEL BUILDINGS AND
HEAVY STRUCTURAL FABRICATION ABSOLUTELY COMMITED
PRE-‐ENGINEERED BUILDINGS
APPLICATIONS Warehouses Factories Cold storages Commercial complexes Offices Parking soluJons AircraK hangers And many more…
ADVANTAGES OF PEB OVER CONVENTIONAL STEEL CONSTRUCTIONS Custom designed Low iniJal cost Superior quality Faster delivery schedules Minimal maintenance AestheJcally appealing Flexibility in funcJonality Architectural versaJlity
Provision for future expansion Stronger and safer Provision for relocaJon Energy efficient Large clear spans Earthquake resistant Easier erecJon Easy integraJon of services
PN Agro Rudra Techno Sindu Cargo Mahindra VVC Showroom
Pharamax India Bhunasweri cold storage Bibo water Nova Carbons
ANCHORING SUCCESS DELTA Pre Engineered Buildings Pvt. Ltd. established in 2007, is proud to have grown as Customers’ Preferred Choice for their Pre Engineered and Structural Steel Building requirements within the short span of starJng its operaJons. We have successfully completed and are building numerous projects all around the southern states of India. We always endeavor and assure to provide our valued customers the best possible service in all the terms of handling the job, right from the first enquiry Jll the delivery of project. DELTA is a high quality soluJon for your pre engineered steel building requirements. We thoroughly understand the complexiJes in the project management, and have an a\tude of beaJng schedules, uncompromised safety, transparent dealings, sharing experJse, eco-‐caring, conJnual improvement and above all we do not se]le for anything but the best. With a producJon capacity of 30000 MT per annum, our enJre operaJons are managed and supported by professionals having combined experience in sales, structural designing, detailing, producJon, projects management and customer support.
From Anchoring to operaBon, DELTA is synonymous with quality, speed, economy, service, safety, performance and above all, Customer Delight.
“
“
V Sandhya Sri bio seeds
Barathi Polymers
Ganavaram railway bridge
PRIMARY FRAMES are designed in accordance with the steel construcJon manual published by American InsJtute of Steel ConstrucJon (AISC). Manufacturing dimensional tolerances are accordance with the requirements of Metal Building Manufactures AssociaJon (MBMA) of USA. Built-‐up secJons are fabricated from hot rolled steel plates confirming to ASTM A 572M grade or equivalent with minimum yield strength of 345N/mm2 (50ksi)
SECONDARE STRUCTURAL FRAMING refers to Purlins, Grits, Eave Struts, Wind bracing, Flange bracing, Base angles, Clips and other structural parts. Standard purlins and grits are roll-‐formed Z-‐secJons with 64 mm flanges 200 mm deep. Eave struts are 200 mm deep with 100 mm wide top flange. Cold-‐formed members are designed in accordance with the American Iron and Steel InsJtute (AISI). The material of cold-‐formed members confirms to ASTM A653M grade SS 340 Class 1 or equivalent with Zinc coaJng to Z 275 designaJon (275 g/m2) having a minimum yield strength of 345 N/mm2.
PRIMARY FRAMING
SECONDARY FRAMING
Roof and wall panels are roll-‐formed secJons from 0.45 mm to 0.5 mm thick AluZinc color coated steel. Standard roof panels are made from bare AluZinc coated steel. Panel paint film thickness is 25 microns on the exterior weather face and 5-‐7 microns of PU compaJble epoxy primer on the interior face. The sheeJng material is cold-‐rolled, high tensile 550 Mpa yield stress, with hot dip metallic coaJng of Galvalume 150 gm/m2 total, AZ 150 as per ASTM A792 or AS 1392, and wall coated with 25 microns modified polyester pint system applied on Zincalume.
SHEETING
ACCESSORIES
SUB SYSTEMS The strength of the PRE ENGINEERED BUILDING system lies in its ability to incorporate a large number of structural subsystems like Cranes, Canopies, Fascias, ParGGons, Roof monitors, Roof extensions, Bracings, Jack beams, Expansion joints, Mezzanines, ect., use standard components and standard design approaches to saJsfy a wide range of custom requirements.
A PEB can accommodate a variety of tradiJonal and new age accessories, like Turbine venGlators, Sky lights, Roof curbs, Ridge venGlators, Windows, Louvers. Doors, InsulaGon material, ect.
Crane Fascia
Roof monitor Skylights
Ridge venBlator Turbine venBlator Roll up shuNer Louvre
DELTA is equipped to deliver world class buildings with the support of, State-‐of-‐art manufacturing faciliJes one each near Kadapa and Maheshwaram (Shamshabad, Hyderabad) in Andhra Pradesh. With a PEB producJon capacity of 30,000 MT per annum (planned to scale up to 50,000 MT) and Heavy structural fabricaJon capacity of 24,000 MT per annum (planned to scale up to 40,000 MT) DELTA delivers top quality steel soluJons through the support of the fully integrated soKware (complete integraJon of design, engineering, manufacturing and logisJcs) and fully trained technical manpower. ConJnuous improvement through internal and customer feedback, and focused R&D, helps us understand and serve be]er to the ever-‐changing demands of the industry. With our growing experJse in ‘eco-‐friendly’ buildings (member of IGBC) we ensure that we are responsible for a be]er and cleaner environment.
CAPABILITIES
Salzer Electronics Genesis Barathi Seeds
Kaikaram Thatavarthi apparel
DELTA Pre Engineered Buildings Pvt. Ltd.
Corporate Office
34/A Hitech city staJon road Khanamet, Madhapur, Hyderabad 500 081 Andhra Pradesh, INDIA P +91 40 4466 2525 F +91 40 4466 2515 M +91 90520 78899 Factories Near Krishnapuram Railway StaJon Tadigotla Village, Chintakommadinne (M) Kadapa 516 003 Andhra Pradesh, INDIA P +91 8562 201 141 22/C Survey no. 1/1 Kancha Imarat, Raviryal (V) Maheshwaram (M) 501 359 RR Dist. Hyderabad, AP, INDIA
www.deltapeb.in sales@deltapeb.in
We are Environment Friendly
OpGmal material usage without compromising on factor of safety Use of reusable and recyclable material Organized collecGon of rain water water for harvesGng Use of sunlight through skylights and wall lights for day lighGng Use of wind turbine venGlators for natural venGlaGon Use of suitable insulaGon for interior temperature control Integrated operaGng system for error free execuGon Integrable with solar panels and wind mills
ABSOLUTELY COMMITED
PRE-‐ENGINEERED BUILDINGS