Damage inspection.PDF

The Viet-Nhan Agriculture - Industry - Marine Control Inspection Group

45, Str. 03, Ward 04, District 03, Ho Chi Minh City, Vietnam Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393 aimcontrol@hotmail.com, aimcontrol@hotmail.com, www.aimcontrolgroup.com

PHOTOGRAPHIC REPORT 1.1 OVERVIEW THE MACHINES BEFORE SURVEY

Overview the Machines

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

DAILY UN-LOADING & REPLACEMENT REPORT FOR WETTED/DAMAGED RICE BAGS

M/V : Hoang Son 28

Port of unloading : Rau Qua II, Ho Chi Minh city - Vietnam

Shipper : Vimafoood II

Commodity : The rice bags were wetted

Date of Unloading : 25 July 2011

Date of replacement : Not yet replace

Causing of unloading: The wetted rice bags caused by raining water leaded ouside to inside .........

RESULTS OF UNLOADING:

Quantity of un-loaded: One hundered and fifty one of wetted bags

RESULTS OF REPLACEMENT (WITH SOUND BAGS)

Quantity of replacement: NONE

The quantity of wetted bags could be not estimated, the wetted bags shall be unloaded on next

days. It will be reported on DAILY UN-LOADING & REPLACEMENT REPORT FOR WETTED/DAMAGED RICE BAGS in next days.

Remarks: These unloaded rice bags were not yet replaced with sound rice bags (as per Master of vessel, these unloaed rice bags will be replaced after unloading all of wetted bags out of hold No.3 of vessel.

HOLD SHIPPER QUANTITY

(BAGS) NET WEIGHT

1, 2 & 4 N/A N/A N/A

3 Vinafood II 151 7.550

TOTAL 151 7.550

HOLD SHIPPER QUANTITY

(BAGS) NET WEIGHT

1, 2 & 4 N/A N/A N/A

3 0 0 0

TOTAL 0 0

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

AREA OF POSITION LEAKED WATER OUTSIE TO INSIDE HOLD No.3

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

WELDING & REPAIRED TO AREA OF POSITION LEAKED

THE LEAKEED AREA OF POSITION WAS COMPLETELY WELDED.

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

No.: 3557/MR.0/2011AIM

Date: 25 July 2011

Hold No.1:

Tank top & hoppers were slightly rusted with scales at some locals.

Hold No.1:

Some positions of tank top were being slightly moisture.

Hold No.1:

Generally viewing to Tank top

Generally viewing to Ceiling

Hold No.2:

Generally viewing to hold

Hold No.2:

Tank top & man holes were slightly rusted with scales at some locals

Hold No.3:

Tank top & man-holes were slightly rusted with scales at some locals.

Hold No.3:

Tank top was slightly rusted with scales at some locals

Hold No.4:

Generally viewing to Hold

Hold No.4:

Tank top & man-holes were slightly rusted with scales at some locals.

Hold No.4:

Tank top was slightly rusted at some locals

Taken the sweeping cargo samples at Ship’s holds (on the tank top)

Sample of Hold No.1

Sample of Hold No.2

Sample of Hold No.3

Sample of Hold No.4

Taken the sweeping cargo samples at holds (on the tank top)

The alleged cargo were stored in Hai Phong Port’s Warehouse

Taken and opened randomly at the entire of positions of sweeping cargo of 203.70 mts to determine on

the extent of damage and taking samples

Taken and opened randomly at the entire of positions of sweeping cargo of 203.70 mts to determine on

the extent of damage and taking samples

Mixed all of goods before sampling

Sampled

Samples

Condition of the alleged damaged sweeping cargo at port warehouse

III. THE ADJUSTED ON LOSS/DAMAGE & COMPENSATION

This is based on Ship-owner, The Cargo Insurance & "Buyer/ Receiver” have considered on the

settlement of this case.

The seller is not responsible for this matter.

IV. OPINION

Basing on the official results of our inspection, and refer to the relative document, we are of the

opinion that the damages to the above mentioned cargo happened in the ship’s holds during the

discharge at Hai Phong port, Vietnam due to the following causes:

• The sweep ing cargoes were s l ight ly s ta ined at due to Ho ld s s l i gh t ru s t ed .

• Dunnage materials were not applied for segregation of the cargo from ship’s holds

construction.

FOR AGRICULTURE - INDUSTRY - MARINE INSPECTION GROUP

Dr. Capt. Nguyen Te Nhan / General Director

GENERAL VIEW OF CRANE NO.2 AFTER HOISTING WIRE DAMAGES NOTED:- THE CRANE APPEARED IN SOUND CONDITION

4.4 In accordance with 4.3, we found the No.1 and No.2 crane hoisting wires had suffered

excessive ‘jags’ and strand‘ break up’. This condition is certainly indicative of mishandling/

carelessness with generally appears to be numerous scraping by all appearances that hardly

frequent come into contact with hatch coamings by the crane operator during discharging

operation.

NO.1 CRANE’S HOISTING WIRE, ‘JAGS’ AND STRAND ‘BREAK UP’

HATCH NO.1, SIGN OF SCRAPING AT COAMING

NO.2 CRANE’S HOISTING WIRE APPEARS IN WELL GREASE CONDITION

DAMAGE SURVEY EXPERTS TO OCEAN SHIPPING ACCIDENTS AND INCIDENTS

No Size / Photos Details damages

01 H390x300x10x16x12000

02 H390x300x10x16x12000

3 H390x300x10x16x12000

04 H390x300x10x16x12000

The Viet-Nhan Agriculture – Industry – Marine Control Inspection Corporation

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

04 Đinh Tiên Hoàng Str., Ward 1, Bình Thạnh District, Ho Chi Minh City – Vietnam

Tel : (84.8) 832.7204 Fax : (84.8) 832.8393 E-mail : aimcontrol@vnn.vn, aimcontrol@media.net.vn, Website : www.ship.gr/aim.htm

Lotus port Location: 10041' N; 106046' E

Diagram of Lotus port

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Position of Wharf No. K17 of Lotus Port Authority

The affected damage area of Wharf No. K17 from impact

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Damage to the structure of wharf No.K17

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Damage to the wharf structure and Cylindrical Fenders and Chain cables

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Damage to the wharf structure

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Dive team of AIM Control

Diagram of Structure of Lotus port

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

Diagram of Structure of Wharf No. K17

Position of impact to the Wharf of Lotus port

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

The vertical reinforced concrete breakwater wall was destroyed by impact

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

The cylindrical fender was broken by impact

The reinforced concrete barrier edge of wharf was destroyed

No.: 3160/MR.0/2007AIM

Date: 29 May 2007

The destroyed Wharf deck was leaked by the river water from the bottom to upward

The Viet-Nhan Agriculture – Industry – Marine Control Inspection Group

No: 3521/TT.0/2010AIM Date: 25/12/2010

Tel : (84.8) 3832.7204 Fax : (84.8) 3832.8393 E: aimcontrol@vnn.vn; inspection@aimcontrolgroup.com W : www.aimcontrolgroup.com

The collided area of wharf of Gemadept Dung Quat International Port

No: 3521/TT.0/2010AIM Date: 25/12/2010

The reinforced horizontal beam of wharf was destroyed to break due to collision

The destroyed to break due to collision & Latent & Arising Defect

No: 3521/TT.0/2010AIM Date: 25/12/2010

The reinforced horizontal beam of wharf was destroyed

No: 3521/TT.0/2010AIM Date: 25/12/2010

The reinforced of wharf was destroyed to break due to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

At the position of crane rail of Wharf, the internal structure of Wharf deck was destroyed due to

collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

The reinforced concrete barrier edge, breakwater & deck of wharf were cracked due

to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

The reinforced concrete barrier edge, breakwater & deck of wharf cracked due to collision

Elastic chink separates of 02 segments of moved due to the collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

Elastic chink separates of 02 segments of moved due to the collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

At the position of crane rail of Wharf, the internal structure of Wharf deck was destroyed due

to collision

At the position of crane rail of Wharf, the internal structure of Wharf deck destroyed. The destroyed Wharf deck leaked by the water from the surface of deck to downward

No: 3521/TT.0/2010AIM Date: 25/12/2010

03 Funneled fenders were danmaged due to collision (no safety to re-use)

No: 3521/TT.0/2010AIM Date: 25/12/2010

Funneled fenders damaged due to collision (no safety to re-use). The reinforced

concrete breakwater of wharf were cracked & broken

Funneled fenders damaged due to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

The supplied electric system of shore was out of working due to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

The LIEBHERR Crane system No.1 were damaged due to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

05 Motors (5.5 kwh - Germany) & 05 gear boxes (in synchronous) were broken

No: 3521/TT.0/2010AIM Date: 25/12/2010

05 Motors (5.5 kwh - Germany) & 05 gear boxes (in synchronous) were broken

No: 3521/TT.0/2010AIM Date: 25/12/2010

Water side leg and land side leg & main beam were deviate from the eccentric

Water side Leg (A letter shape) was cracked

No: 3521/TT.0/2010AIM Date: 25/12/2010

The structure of crane was broken due to collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

Our divers to investigate the submersed part of wharf after collision

No: 3521/TT.0/2010AIM Date: 25/12/2010

M.V Horizon Express

Số: 3238/TT.0/2008AIM

Ngày: 20/08/2008

Tel : (84.8) 832.7204 Fax : (84.8) 832.8393 E-mail : aimcontrol@vnn.vn; aimcontrol@media.net.vn Website : www.ship.gr/aim.htm

MV. Me Kong 04 berthed after causing the collided to Port Yard

Damage of MV. Me Kong 04

Số: 3238/TT.0/2008AIM

Ngày: 20/08/2008

Damage of port yard (after collision)

Số: 3238/TT.0/2008AIM

Ngày: 20/08/2008

Damage of port yard (after collision)

Số: 3238/TT.0/2008AIM

Ngày: 20/08/2008

Damage of port Defend (after collision)

The Viet-Nhan Agriculture - Industry - Marine Control Inspection Group 45, Str. 03, Ward 04, District 03, Ho Chi Minh City, Vietnam Tel. (848) 832 - 7204 – (849) 03615612, Fax: (848) 832 - 8393

aimcontrol@vnn.vn, aimcontrol@media.net.vn, www.aimcontrolgroup.com

PHOTOS

(were taken at the site with witness by concerning parties)

Vessel Han Sprinter berthed at Ben Nghe Port – HCMC, Vietnam

Vessel Van Xuan anchored after collision at Sai Gon River – HCMC, Vietnam

PORT SIDE

Hull plating of Port side was damaged

Measuring to the damaged hull plating of portside under witness by concerned parties

Hull plating of port side damaged & deformed, broken (#32-34)

Frames of port side damaged & deformed, broken (#22-29)

STBD SIDE

Hull plating of Stbd side was damaged

Hull plating of Stbd side was damaged (Viewing from outside & inside)

Frames of SBTD side damaged & deformed, broken

Frames & Hull Plating of SBTD side damaged & deformed, broken

REPAIR & RENEWAL SUPERVISION

REPAIR & RENEWAL TO SBTD SIDE

The concerned parties discussed to damages & method of repair & renewal onboard

REPAIR & RENEWAL TO PORT SIDE

Repair to the horizontal stringer plating on F.O Bunker tank.

COATING & TESTING SUPERVISION AFTER REPAIR COMPLETED

COATING TO HULL PLATING & FRAMES INSIDE & OUTSIDE

TESTING

45, Str. 03, Ward 04, District 03, Ho Chi Minh City, Vietnam

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

aimcontrol@hotmail.com, aimcontrol@hotmail.com, www.aimcontrolgroup.com

One single pulley / sheave (D50 cm) of boom head leaved off of its position of working

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Driving cabin’s windshield broken, frame slightly deformed at corners.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

One right hanging cylinder of counterweight slightly bended

(It is difficult to check by visual this bending, needing to check at workshop)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Outrigger front right cylinder slightly bended

(It is difficult to check by visual this bending, needing to check at workshop)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

One Boom jib slightly bended at joint clutch end corner position with dimension 30x30 (mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Head of boom section 1 cracked at first position with dimension 30x40(mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Descripted as the above mentioned page

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Head of boom section 1 cracked at second position with dimension 30x40(mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Head of boom section 4 cracked at one position with dimension 20x20(mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Head of boom section 5 cracked at one position with dimension 250x100 (mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Head of boom section 5 cracked at one position with dimension 250x100 (mm)

measured (as the above page)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Two lacing pipe of boom jib cracked & bended with dimension 60x110 (mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Two lacing pipe of boom jib cracked & bended with dimension 60x110 (mm)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

One Hoist wire (L220m x D21mm) twisted and wry with deformed dimension L100m x D21mm

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

The lid/cover of one lubrication central pump sprung out and its grease overflowed

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

One screw (D2963mm) were broken (it used to be secured the counterweight fixed on crane)

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

To see more details, please kindly find it at the PHOTOGRAPHIC REPORT

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

2. The Equipment, Structure Of The Other Crane

- The impact of boom head of LTM1090 onto another boom section of other crane

which was being laid on the ground. One boom section was scratched in 1 corner and

01 pulley was broken in 1 corner (This boom of crane name Hitachi Sumitomo)

Descipted with the photos taken at site as evidence (in order from the top to down)

Another boom section of other crane with name Hitachi Sumitomo

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

The impact of head of boom section 1; 4 & 5 of LTM1090 onto one boom section of Hitachi

Sumitomo which was being laid on the ground

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

The operator slightly scratched on his palms

PHOTOGRAPHIC REPORT

The cargo packages of shipment stored open wahouse of Vinatex (buyer)

The cargo package case 1

The cargo package case 2

PHOTOHRAPHS OF INSPECTION

CASE 1

CASE 1 overview

SHIPPING MARKS

One position broken with dimension 120 x 120 (cm) at one side of package and 60 cm toward the top of package

One position broken with dimension 50 x 30 (cm) at corner of package foot

One lengthwise wall deformed outward

LENGTHWISE WALL DEFORMED OUTWARD

The thin plate covered on the top of package

LIFTING MARKS

platform on package

Center mark

Thicknees of wall

Opening of package case 1

There are a lot of anti-moisture bags inside of package case 1

Condition Machineries inside of package case 1

Inside of package case 1 is in drying condition

CASE 2

CASE 2 overview

SHIPPING MARKS

One lengthwise wall deformed inward about 10cm

One lengthwise wall deformed outward about 10cm

inside of Package case 2

Chocked wood to fix positioning

Condition of machineries inside of package case 2

Dimension of laminated wooden board of 4th layer of pallet

The laminated wooden board of 4th layer of pallet was broken 04 sides (around)

02 used wooden plates of top layer of pallet

Dimension of used wooden plates of top layer of pallet

The base of machine was put on these 02 plates of top layer and secured by 01 Bolt & Nut at 01 plate and 01 Bolt & Nut at other plate at opposite side

Dimension of used wooden plates of top layer of pallet

01 used wooden plate was broken with dimension 4cm x 11cm

01 used wooden plate was broken with length 25cm

Bolt and Nut linked Base of machine to the top layer of pallet

The base of machine was put on these 02 plates of top layer and secured by 01 Bolt & Nut at 01 plate and 01 Bolt & Nut at other plate at opposite side

2.2 MACHINE

Front case was damaged, bent and deformed

Main Body (655-101/1) was broken

Bear Case (655-101/1) was broken of the Pulley

Scale Bearer (655-601-1) was broken

Short Wing (655-1551-1) was broken at 02 position

Short Wing (655-1551-1) was broken

Bandknife was chippep

Oiler Felt (655-A2/3) was broken

Pedal was broken

Lens Holder (655-R1/2) was broken

Broken parts

Crank of Pressing Table was bent

Crank of Tension Blade was missing

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

aimcontrol@vnn.vn, ceo@aimcontrolgroup.com; www.aimcontrolgroup.com

3. Remarks:

3.1 All of equipment and devices were damaged by mechanics without damages/loss effected

due to due to water, chemical on these equipment & devices.

3.2 The entire remaining of this equipment & devices were in normal condition.

3.3 Please kindly review the photos with explain in result of inspection details following:

1. VHF 2 1.1 Truck - Kamaz 4326

Truck - Kamaz 4326 Chassis No.: XTC43260R92362348

GPS antenna cluster of Global Position Satellite

devices (COMPASS C100) mounted on the top of

truck at right side was crushed, ruptured.

The peeling of weapons was cracked to out of

the insulation of refrigerator at GPS antenna

position.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Arms of equipment wireless were bent in downward and have a folding concave scars

Antenna WLAN2 wireless and the pre-amplified were left/ out of the arms of equipment wireless.

Edge of WLAN2 antenna was broken 9cm

(length) and scratched 5cm around the

edges in upward.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

1.2 Diesel generador

Trailer No.: WTR1D3100AT000004 03 hooks (using to canvas) were fractured.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

2. UHF 2 2.1 Truck - Kamaz 4326

Truck - Kamaz 4326 Chassis No.: XTC43260R92362591

The right fender was crushed.

01 right side mirror is broken. 01 chassis-mounted mirror was crushed and mirror was broken at right door.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

Storage box of truck (right side) was crushed at the top of box and door of box.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

2.2 Diesel generator

Trailer No.: WTR1D3100AT000009

01 left tire inserts was lost

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

3. VHF 3

Diesel generator Trailer No.: WTR1D3100AT000006

Latch bolt of the left foot was lost and to be replaced by another bolt.

Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393

IX. THE PHOTOS OF CONTAINERS & EQUIPMENT IN HAI PHONG PORT: The buyer has sent us the some of photos of equipment & containers were taken by them at Hai Phong Port (without witness by our surveyors or inspectors):

XII. CONCERNED DOCUMENTS:

Concerned documents collected in survey operation were attached in supplement.

This Report reflects our findings at the time and place of inspection only

The Viet_Nhan Agriculture Industry Marine Control Inspection Corp.

Dr. Capt. Nguyen Te Nhan / General Director

45, Str. 03, Ward 04, District 03, Ho Chi Minh City, Vietnam Tel. (848) 3832 - 7204 – (849) 03615612, Fax: (848) 3832 - 8393 aimcontrol@hotmail.com, ceo@aimcontrolgroup.com, www.aimcontrolgroup.com

PHOTOGRAPHIC REPORT

(were taken at the site with witness by concerning parties)

View of the Vessel Alongside Gamcheon, Busan Port, Korea

The Viet-NhanAgriculture-Industry-Marine Control Inspection

45, Str. 03, Ward 04, District 03, Ho Chi Minh City, Vietnam Tel. (848) 832 - 7204 – (849) 03615612, Fax: (848) 832 - 8393

aimcontrol@vnn.vn, aimcontrol@media.net.vn, www.aimcontrol.service.to

Photo Page : No.1

View of the Vessel Alongside Gamcheon, Busan Port, Korea

View of the Vessel’s Winch

View of Cooling Room of the Vessel View of Lifeboat

Photo Page : No. 2

View of Engineer Room Showing in Good Condition

Photo Page : No. 3

View of Engineer Room Showing in Good Condition

View of Engineer’s Checking to Engine Room

Photo Page : No. 4

View of Dis-assembled Parts of Condenser View of Engineer Room

View of Engineer Room

Photo Page : No. 5

View of Engineer Room

Photo Page : No. 6

View of Several Gauges in the Engineer Room

View of Control Box View of Pipes

Photo Page : No. 7.

View of Condenser Covers

Photo Page : No. 8

View of Damaged Condenser Pipe Holes Marked in White Color

Photo Page : No. 9

View of Chafed in or Cracked Pipe Holes

AIM Control, Email: aimcontrol@aimcontrolgroup.com - 1 -

“H&M DAMAGE SURVEY” PHOTOGRAPHS

PHOTOGRAPH DESCRIPTION

M.V “ISTRIAN

EXPRESS” AT BENGOT

ANCHORAGE ZONE,

HAIPHONG CITY,

VIETNAM

MAIN ENGINE.

PARTICULAR OF MAIN

ENGINE.

PROCESS OF REPAIR.

LOWER BEARING SHELL

MATERIAL ON WOKING

SURFACE WAS PEEL OFF

LOWER BEARING SHELL

NO.5, NO.3, NO.2, NO.1

WERE SAME

CONDITION:

MATERIAL ON WOKING

SURFACE WAS PEEL OFF

AT SAME POSITION.

UPPER BEARING SHELL

NO.6:.

LUBRICATING GASH

WAS PITTED AND PEEL

UPPER BEARING SHELL

NO.1, NO.2, NO.3, NO.4,

CONDITION WERE THE

SAME: LUBRICATING

GASH WAS PITTED AND

PEEL OFF

NEW CRANK BEARING

SETS WERE SUPLIED BY

OWNER FOR REPAIR.

NEW UPPER BEARING

LUBRICATING CAVITIES

WERE MADE THE

REDUCE/ RELEASE

PRESSURE GASH

Overview the Machines

The Machine covered by tapulin

Unpacked the Machines for survey

1.2 PHOTOGRAPHS OF MACHINE NO. 1 (Serial No. 013527)

Overview of Machine

The Machine

Shipping Marks

Packing List Holder

TradeMark

Shipping Lines Marking

View the Engine from behine

View the Engine from Front.

Engine No. 11623424

Marking of Engine

01 Electric wire were burnt insulating coating at the position of back of the Machine

01 Electric wire were burnt insulating coating at the position of back of the Machine.

01 Electric wire were burnt insulating coating at the position of front of the Machine.

1.3 PHOTOGRAPHS OF MACHINE NO. 2 (Serial No. 013528)

Overview of the Machine

Trade Mark

Shipping Mark

The Engine was lean with angle of 10 degrees toward the right side of the Machine

Engine No. 11626209

01 rubber cooling water pipe at the position of charge cooler was broken

Joint was deformed due to slope of engine

02 Botls at Nut at the position of top of the Columns to connect the Base of engine to Column were

broken/loosen

Damage inspection.PDF

Documents

Transcript of Damage inspection.PDF

SOP inspection.pdf

Automatically generated PDF from existing images. Inspection.pdf · encompass textile and interior . 1076270 (40' std) we hereby, certify that the merchandise with reference to encompass

Additive Damage Analysis of the Frequency Damage Spectrum Damage Analysi… · • The FDS (Frequency Damage Spectrum) provides relative damage with damage values across the spectrum

Damage Modiﬁer: Vulnerable Monster takes 200% damage from ... · the monster takes one more point of damage. Damage Modiﬁer: Mutagenic After taking damage from this type of damage,

033-PRO FOR RADIOGRAPHIC INSPECTION.pdf

I-Inspection Part II - Pruksacss.pruksa.com/TTracking/USM/Manual_I-Inspection.pdfการปร นใบรายการตรวจและใบร บมอบ 3. การบน

ZM - Instructions for Installation, Operation, Maintenance and Inspection.pdf

“COILED TUBING INSPECTION: VALUE, LIMITATIONS, INDUSTRY ... Inspection.pdf · “coiled tubing inspection: value, limitations, industry requirements ... magnetizing coil ... ico-shearer

Water Damage | Fire Damage | Smoke Damage

MIL-STD-1875_1983 - Military Standard_Requirements for Ultrasonic Inspection.pdf

Home Inspection - Penny Property Inspectors inspection.pdf · Inspector Name David Penny; Registered member of the Florida Association of Building Inspectors # RPI 610 Company Name

Environmental Damage = Property Damage + Psychological Damage

Digital Radiology for Application „on stream“ - SiteGenndt.sitegen.no/customers/ndt/files/7. Corrosion Inspection.pdf · 1 Digital Radiology for Corrosion Inspection Uwe Zscherpel,

ZARA - geographyfieldwork.com Case INSPECTION.pdf · This case was prepared under ... meantime evolving it into a more classic and upscale ... knitwear, the production ...

Risk Based Inspection Based Inspection.pdf · 2020. 1. 19. · regarding inspection schedules and maintenance budgeting, allowing resources to be allocated appropriately to ensure

Module 19 Ultrasonic Inspection.pdf

Poultry Inspection - Context Bookshop Inspection.pdf · Poultry Inspection 2nd Edition Anatomy, ... Anatomy/Physiology External 3 Skeletal Structure 7 ... Fowl Typhoid 87

PIPING AND COMPONENTS INSPECTION.pdf

Galvanize inspection.pdf

Wire Rope Inspection and Examination - Chudovmanuals.chudov.com/Grove-Rough-Terrain-Crane/Wire-Rope-Inspection.pdf · R. Verreet & W. Lindsay, Wire Rope Inspection and Examination,