Post on 09-Aug-2020
CONCRETE, MASONRY, & ASPHALT TOOLS MASTER CATALOG #110
CZAR WELD TOOLS
PROUDLY MADE IN THE USA FOR OVER 40 YEARS
Phone: 636-671-4187 Toll Free: 800-245-3544
Fax: 636-375-3625 e-mail: sales@czarweldtools.com
www.czarweldtools.com
CZAR WELD TOOLS, INC. 4619 Dul in Creek Road
House Spr ings , MO 63051
GUARANTEE Czar Weld Tools, Inc. guarantees its tools against any defective material or workmanship. Any such product will, at our option, be replaced or repaired free of charge if returned to us with shipping charges prepaid. Our liability under all warranties, expressed or implied, shall be limited to the replacement or repair of defective products.
CREDIT There is no minimum order. Unless otherwise instructed, please contact us for a credit application before your initial order. Alternatively, your initial order may be paid for in advance by credit card, check or money order.
TERMS Unless otherwise informed, payment is due NET 30 from date of invoice. Past due invoices are charged 1% interest penalty per month (12% per annum) on the unpaid balance after 30 days.
DELIVERY Most orders are shipped within 24 hours. Some orders, such as large or custom orders, may take an additional day or two. If delivery is critical, please notify us of your requirements and we will accommodate you if at all possible.
FREIGHT All prices are FOB House Springs, MO. For orders shipping to a single destination within the continental United States, freight will be prepaid on any order with a net invoice value of $1,000 or more, unless it contains items that must ship via truck, in which case the net invoice value must be $2,000 or more. Truck-only items are marked in the catalog with an asterisk.
© Czar-Weld Tools, Inc. No portion of this catalog may be reproduced without the express written permission of Czar-Weld Tools, Inc.
PRICES Prices subject to change without notice. Please contact us regarding special pricing for large volume orders.
100% MADE IN THE U.S.A.
A LONG HISTORY OF QUALITY TOOLS Czar Weld Tools has been proud to make quality tools for use by the concrete finishing, masonry, and asphalt industries for over 40 years. We strive to produce the highest quality tools at affordable prices. Try our tools and you’ll see: they are built stronger and last longer.
Q U A L I T Y .Q U A L I T Y .Q U A L I T Y . S E R V I C E .S E R V I C E .S E R V I C E .
M A D E I N T H E U S A .M A D E I N T H E U S A .M A D E I N T H E U S A .
CONTENTS
CONCRETE PLACERS Pg 1
BULL FLOATS Pg 2
BULL FLOAT BRACKETS Pg 2
SNAP LOCK HANDLES Pg 3
HANDLE ADAPTERS Pg 3
HAND MAGS AND HAND FLOATS Pg 3-4
POWER TROWEL HANGERS Pg 5
CONCRETE CHUTES, CHUTE HANGERS, CHUTE TOOLS Pg 5-6
FORM FUNNELS, WALL TOP FLOATS Pg 6
CONCRETE SLAB CUTTERS Pg 7
CURB-IT TOOLS Pg 7
CONCRETE TAMPERS Pg 8
HIGHWAY STRAIGHTEDGES Pg 8
FOOTING KEYWAY GROOVERS Pg 9
ONE MAN SCREEDS Pg 9
HAND SCREEDS Pg 10
SKI-BOARDS & KNEEBOARDS Pg 11
CONCRETE SHOVELS, WALL SHOVELS & WALL HOES Pg 11-12
GROOVERS Pg 13-14
EDGERS Pg 15-16
CURB & GUTTER TOOLS Pg 17
CONCRETE FINISHING BROOMS & BRUSHES Pg 18
BRICK HODS, MORTAR HODS & MORTAR HOES Pg 19
ASPHALT LUTES & BLACKTOP BRUSHES Pg 20
CONCRETE TOOLS
MASONRY TOOLS
ASPHALT TOOLS
THE ORIGINAL “SMOOTH MOVER” CONCRETE PLACER
Simply the best concrete placer on the market. Made from high strength tempered aluminum alloy, the Smooth Mover is strong enough to pull mesh with the corners of the blade, so you don’t need a hook! Includes 60” x 1-3/8” ash handle.
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 1
WORKS GREAT FOR MOVING SAND,
CHAT AND ASPHALT, TOO!
SIZE PART NO.
20” x 4” BLADE CWT-120
30” x 4” BLADE CWT-130
48” x4-1/2” BLADE CWT-148
DON’T BE FOOLED BY IMITATIONS. Remember, if it doesn’t have the Czar Weld name on it, it's not a Czar Weld tool.
CONCRETE TOOLS
SIZE PART NO.
20” x 4” BLADE CWT-120 SL
30” x 4” BLADE CWT-130 SL
SNAP-LOCK SMOOTH MOVER Our top quality “Smooth Mover” placer head with a snap lock socket. Accepts all standard 1-3/4” and 1-3/8” snap lock handles (not included). For handles, see page 3.
SMOOTH MOVER EXTREME* Want a practically indestructible concrete placer? Check out our new all aluminum Smooth Mover. Features a full 6’ heavy duty ribbed aluminum handle welded in place for added strength.
SIZE PART NO.
20” x 4” BLADE CWT-120 A
30” x 4” BLADE CWT-130 A
Manufactured with the same high quality that
distinguishes all of Czar Weld’s tools.
* MUST BE SHIPPED VIA TRUCK
THE CZAR WELD BULL FLOAT Made from FORMED high strength tempered aluminum alloy, not extrusion, resulting in a longer wearing surface that resists warping better than an extruded float. Flared edges reduce lap marks. Features 6 hole Universal Mounting Plate so that you can attach any bracket.
TYPE PART NO.
No Bracket Included CWT-248
Includes Rock-’Em Adjustable Bracket CWT-24816R
Includes Threaded Handle Bracket CWT-24816TH
THREADED BULL FLOAT BRACKET Czar Weld’s bull float brackets fit all standard 4-hole bull floats and fresnos, and accept all standard threaded handles. Made from rustproof aluminum. Hardware included.
TYPE PART NO.
THREADED CWT-16 TH
ROCK-’EM BULL FLOAT BRACKET Adjust the angle of your bull float simply by turning the handle. The Rock-’Em fits all standard 2-hole and 4-hole bull floats and fresnos, and accepts all standard snap-lock handles. Eliminates back strain and makes low ceiling work possible. Made from rustproof aluminum. Hardware included.
Works with 1-3/8” and 1-3/4” Snap Lock Handles
SIZE PART NO.
— CWT-16 R
SIZE: 48” x 8”
Flared edges reduce lap
marks!
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 2
STANDARD BULL FLOAT Made from extruded high strength tempered aluminum alloy, this bull float features a “broken in” surface. Four tapped holes allow attachment of any standard brackets (not included).
SIZE PART NO.
8” x 42” CWT-49ABF-42
8” x 48” CWT-49ABF-48
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 3
SIZE PART NO.
3-1/2” x 16” CWT-52HM-16
16” CAST MAG FLOAT Die cast magnesium. Size is 3-1/2” x 16”. Features a comfortable, replaceable wood handle. Working surface is “broken-in” and corners are rounded.
LIGHTWEIGHT AND POSITIVE LOCKING
SIZE PART NO.
1-3/8” CWT-19138
1-3/4” CWT-19134-B
COLOR
Clear Adonize
Blue
1-3/4” Red CWT-19134-R
1-3/4” White CWT-19134-W
1-3/4” Yellow CWT-19134-Y
1-3/4” Green CWT-19134-G
1-3/4” Orange CWT-19134-0
THREADED HANDLE ADAPTER This handy adapter converts snap-lock handles to threaded handles. Allows standard threaded brackets to accept 1-3/8” or 1-3/4” snap-lock handles.
Works with 1-3/8” and 1-3/4” Snap Lock Handles
SIZE PART NO.
— CWT-17 HA
ALUMINUM BROOM ADAPTER Rustproof aluminum adapter bolts to any broom, replacing worn out wooden threads.
BUILT STRONGER. LASTS LONGER.
Get new life from
that old broom!
SIZE PART NO.
— CWT-29ABA
Lightweight and positive locking, Czar Weld Snap-Lock Handles can be used with our Bull Floats, Walking Groovers, and most other tools with an adjustable head (ours and other manufacturers’.) Clear adonized aluminum finish. 1-3/8” x 72”.
SNAP-LOCK HANDLES
1-3/4” Diameter
1-3/8” Diameter
We’ve improved our popular 1-3/4” Snap-Lock Handles! Our 6’ long handles now feature double snap buttons and are finished in durable and attractive powdercoat. Choose from six stock colors: Red, Blue, Yellow, Green, Orange, or White. You’ll always know which handles are yours on a site with multiple contractors. Order 48 or more and we can custom powdercoat your order in any custom color you choose! Call for details!
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 4
SIZE PART NO.
3-1/8” x 12” CWT-45AHM-12
3-1/8” x 14” CWT-45AHM-14
3-1/8” x 16” CWT-45AHM-16
3-1/8” x 18” CWT-45AHM-18
3-1/8” x 20” CWT-45AHM-20
CUSTOM COLORS AND SIZES AVAILABLE!
SIZE PART NO.
3-1/8” x 16” CWT-46HM-16
16” HAND MAG Made from top quality extruded magnesium. Size is 3-1/8” x 16”. Working surface is broken-in at the factory. Features a comfortable, replaceable wood handle. Mags are colored on top side only and will not mar your concrete. Custom colors available; call for details!
CANVAS-RESIN HAND FLOATS Our laminated canvas-resin floats are 3/8” thick and long wearing. Bottom surface is roughed and ready to use. Brings concrete back to life!
SIZE PART NO.
3-1/2” x 16” CWT-48WHM-16
REDWOOD HAND FLOAT Made of 3/4” thick selected redwood, the nose of this float is beveled for work in tight quarters.
SIZE PART NO.
3-1/2” x 12” CWT-47RHM-12
3-1/2” x 14” CWT-47RHM-14
3-1/2” x 16” CWT-47RHM-16
3-1/2” x 18” CWT-47RHM-18
3-1/2” x 20” CWT-47RHM-20
ALLOY HAND MAG Made from our special long wearing alloy. Broken-in surface from the factory. Features a comfortable wood handle.
Includes 6 feet of chain with grab hook
SIZE PART NO.
1000 lb cap. CWT-28ACH
LENGTH PART NO.
8 ft CWT-35 WECC 08
12 ft CWT-35 WECC 10
14 ft CWT-35 WECC 10
16 ft CWT-35 WECC 10
18 ft CWT-35 WECC 10
20 ft CWT-35 WECC 10
10 ft CWT-35 WECC 10
ALUMINUM CONCRETE CHUTES* Made from extra heavy duty extruded and tempered aluminum, Czar Weld’s Concrete Chutes feature a wide-mouth entry to make hook-up a snap. These stout but light chutes are a cut above due to Czar Weld’s quality welding and attention to detail. The entry is hard-rolled for durability and the braces are bolted AND welded to ensure trouble-free pouring.
NOW AVAILABLE IN 8 FT! ASK ABOUT CUSTOM
LENGTHS!
POWER TROWEL HANGER Hanger grabs onto floor joists using the weight of the trowel itself. Hang your power trowel in place before pouring your basement slab, making it easy to start your finishing when and where you want. 500 pound capacity.
SEE ABOVE FOR OUR CONCRETE CHUTE HANGER.
Handy nailing tab for placement
SIZE PART NO.
500 lb cap. CWT-28APTH
CONCRETE CHUTE HANGER Hanger grabs onto floor joists using the weight of the concrete chute. Comes with chain to attach your chute. Pour basement slabs quicker!
ALSO HANGS POWER TROWELS—SEE BELOW!
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 5
ALSO AVAILABLE WITHOUT WIDE-MOUTH ENTRY
* MUST BE SHIPPED VIA TRUCK
THE CZAR-WELD CHUTE TOOL Provide better flow control, eliminate spillage, and clean up faster with the Czar-Weld Chute Tool. The tough 6061-T6 tempered aluminum head is 12” x 8”. The replaceable handle is 1-3/8” x 60” ash hardwood.
FITS MOST READY-MIX CHUTES
POUR CONCRETE FASTER!
SIZE PART NO.
— CWT-9 CT
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 6
FORM FUNNEL Put our Form Funnel under your chute exit and ensure the concrete goes into the form, not on it. Made from high strength tempered aluminum alloy with replaceable handles. Works with forms 7” wide and up.
SIZE PART NO.
16” x 16” CWT-51FF LIGHT WEIGHT
AND DURABLE!
WALL TOPPER FLOATS Use our unique floats to slick up foundation wall tops with ease. The Wall Topper will allow you to float along the wall instead of across it. Made from long-wearing 6061-T6 aluminum.
FOR WALL SIZE PART NO.
8” CWT-50WT-8
10” CWT-50WT-10
6” - 10” CWT-50WTF-10
Universal Mounting Bracket with Rock-’Em .
All welded construction. No Brackets to loosen!
Teflon handle bushing allows easy rotation and support.
Easy access water-fill plug.
SIZE PART NO.
10 FT BLADE CWT-2510 CSC
12 FT BLADE CWT-2512 CSC
CONCRETE SLAB CUTTER* Our Concrete Slab Cutter features a full 2” x 4” tempered aluminum alloy blade. It is ideal for all concrete projects where improved flatness is required or desired. This cutter is lightweight enough for easy cross cutting and re-straightening of fresh concrete surfaces. For final re-straightening of concrete surfaces, our ALL WELDED WATER TIGHT BLADE can be weighted with an additional 34 LBS when filled with water. Includes Rock-’Em bracket and (3) six foot snap-lock handles.
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 7
WORKS GREAT FOR CURB AND OTHER SHAPING WORK
SIZE PART NO.
48” CWT-33-CIT-48
72” CWT-33-CIT-72
96” CWT-33-CIT-96
120” CWT-33-CIT-120
THE CURB-IT TOOL* Made from 1” x 2” rectangular tubing with welded end caps. Used for screeding and shaping concrete, this tool has two conveniently placed 1-3/8” x 6” wood handles.
* MUST BE SHIPPED VIA TRUCK
NO TOOLS REQUIRED FOR ASSEMBLY!
BLADE LENGTH
HANDLE LENGTH
PART NO. FOR COMPLETE KIT
10 ft 12 ft CWT-38 SHS 12 10
12 ft 12 ft CWT-38 SHS 12 12
10 ft 16 ft CWT-38 SHS 16 10
12 ft 16 ft CWT-38 SHS 16 12
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 8
BLADE LENGTH
NO. of 6’ HANDLES
PART NO. FOR COMPLETE KIT
10 ft 2 CWT-38 AHS 12 10
12 ft 2 CWT-38 AHS 12 12
16 ft 2 CWT-38 AHS 12 16
10 ft 3 CWT-38 AHS 18 10
12 ft 3 CWT-38 AHS 18 12
16 ft 3 CWT-38 AHS 18 16
STEEL STRAIGHTEDGE KIT
ALUMINUM STRAIGHTEDGE KIT
* MUST BE SHIPPED VIA TRUCK
HIGHWAY STRAIGHTEDGES* Czar Weld’s Highway Straightedges are perfect for checking flatness on large slabs. Available in steel or aluminum, our Straightedge blades are 1” x 2”. Steel versions use a bolt-on rugged steel handle; aluminum versions come with either 2 or 3 standard 1-3/8” x 6’ aluminum snap lock handles (add additional handles for extra reach). Blades, handles, and hardware kits may be purchased separately.
ERGONOMIC HANDLE PLACEMENT
SIZE PART NO.
8” X 42” CWT-37 SJB 42
8” X 48” CWT-37 SJB 48
JITTERBUG CONCRETE TAMPERS* Our steel jitterbug features a flattened expanded metal mesh to push aggregate down just right. Our all-welded and double reinforced construction guarantees that this tamper will stay flatter and last longer.
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 9
THE ONE MAN SCREED* Made from 1” x 2” rectangular tubing with WELDED end caps. This versatile tool allows the user to screed with the narrow face and then float with the wide face! Includes 72” x 1-3/8” ash handle. Sizes over 66” must be shipped via truck.
GREAT FOR LEVELING BASEMENTS, SIDEWALKS, FOOTINGS, ETC.
SIZE PART NO.
36” CWT-32-OMS-36
42” CWT-32-OMS-42
48” CWT-32-OMS-48
60” CWT-32-OMS-60
72” CWT-32-OMS-72
96” CWT-32-OMS-96
SCREED AND FLOAT
WITH THE SAME TOOL!
LIGHT WEIGHT LESS THAN 5 LBS!
SIZE PART NO.
n/a CWT-8 FKG
FOOTING KEYWAY GROOVER Our Keyway Groover will save you a lot of time and back strain when pouring footings. The tough 6061-T6 tempered aluminum head is 24” long by 4-1/2” wide and cuts a 2” x 2” groove. The fully adjustable ash handle is 1-3/8” x 60”.
CUSTOM SIZES AVAILABLE
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 10
CROSS SECTION LENGT
H PART NO.
1” X 4” 4’ CWT-30HS1X4-04
1” X 4” 6’ CWT-30HS1X4-06
1” X 4” 8’ CWT-30HS1X4-08
1” X 4” 10’ CWT-30HS1X4-10
1” X 4” 12’ CWT-30HS1X4-12
1” X 4” 14’ CWT-30HS1X4-14
1” X 4” 16’ CWT-30HS1X4-16
1-1/2” X 3-1/2” 4’ CWT-26HHS-04
1-1/2” X 3-1/2” 6’ CWT-26HHS-06
1-1/2” X 3-1/2” 8’ CWT-26HHS-08
1-1/2” X 3-1/2” 10’ CWT-26HHS-10
1-1/2” X 3-1/2” 12’ CWT-26HHS-12
1-1/2” X 3-1/2” 14’ CWT-26HHS-14
1-1/2” X 3-1/2” 16’ CWT-26HHS-16
1-1/2” X 3-1/2” 18’ CWT-26HHS-18
1-1/2” X 3-1/2” 20’ CWT-26HHS-20
2” X 4” 4’ CWT-30HS2X4-04
2” X 4” 6’ CWT-30HS2X4-06
2” X 4” 8’ CWT-30HS2X4-08
2” X 4” 10’ CWT-30HS2X4-10
2” X 4” 12’ CWT-30HS2X4-12
2” X 4” 14’ CWT-30HS2X4-14
2” X 4” 16’ CWT-30HS2X4-16
2” X 4” 18’ CWT-30HS2X4-18
2” X 4” 20’ CWT-30HS2X4-20
2” X 5” 16’ CWT-30HS2X5-16
2” X 5” 18’ CWT-30HS2X5-18
2” X 5” 20’ CWT-30HS2X5-20
2” X 5” 24’ CWT-30HS2X5-24
FOUR DIFFERENT
CROSS-SECTION SIZES AVAILABLE!
OUR SCREEDS ARE CRATED FOR PROTECTION
DURING SHIPPING
* MUST BE SHIPPED VIA TRUCK
HEAVY DUTY HAND SCREEDS* Made from our toughest alloy, these hand screeds all feature a FULL 1/8” wall thickness for superior strength and stiffness. Won’t dent like thin-walled ribbed screeds. Welded on end caps ensure your screed can’t fill with concrete.
Completely Washable!
REPLACEMENT PADS AND STRAPS AVAILABLE.
Completely Washable!
SIZE PART NO.
8” x 28-1/2” CWT-14800SS
6-1/2” x 28-1/2” CWT-14650SS
REPLACEMENT PADS AND STRAPS AVAILABLE.
SIZE PART NO.
8” x 28-1/2” CWT-15800A
6-1/2” x 28-1/2” CWT-15650A
ALUMINUM KNEEBOARDS This will be the last pair of kneeboards you will ever need. Made from durable 1/8” thick aluminum alloy with comfortable Rubatex pads, these kneeboards will not rust and pads won’t absorb water.
REPLACEMENT PADS AND HANDLES AVAILABLE.
Completely Washable! SIZE PART NO.
12” x 22” CWT-3KB
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 11
STAINLESS STEEL SKI-BOARDS Made from the best quality stainless steel with comfortable Rubatex pads, these ski-boards will not rust; pads won’t absorb water. Toe brackets allow for easy movement.
ALUMINUM SKI-BOARDS Made from lightweight and durable aluminum alloy with comfortable Rubatex pads, these ski-boards will not rust; pads won’t absorb water. Toe brackets allow for easy movement while kneeling or walking.
HEAD TYPE
OVERALL LENGTH
PART NO.
Deep 37” CWT-737
Deep 48” CWT-745
Shallow 41” CWT-1840
Shallow 51” CWT-1848
WHY LIFT MORE WEIGHT THAN YOU HAVE TO?
ALUMINUM CONCRETE SHOVELS Made from 6061-T6 tempered aluminum, these light but strong shovels will help you handle mortar and concrete while minimizing your effort. Models 737 & 745 feature extra pitch and a deep pan head to help move more material. Models 1840 & 1848 have a shallow head for use in leveling, puddling, and screed work. Shovel head is 11” x 9-1/4”. Long and short handle lengths available. Features a D-Grip handle.
ALUMINUM WALL SHOVELS Made from 6061-T6 tempered aluminum, these light but strong shovels are excellent for moving concrete in poured walls. Four different REPLACEABLE handle styles are available: Aluminum Straight, Aluminum T-Handle, Hardwood Straight, and Hardwood with D-Grip.
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 12
Aluminum Straight and T-Grip Versions
Wood Straight and D-Grip Versions
SHOVEL WIDTH
HANDLE TYPE OVERALL LENGTH
PART NO.
3-1/2” Hardwood D-Grip 54” CWT-12350 DG
3-1/2” Hardwood Straight 69” CWT-12350 SHH
3-1/2” Aluminum T-Grip 48” CWT-13350 ATH
3-1/2” Aluminum Straight 69” CWT-13350 SAH
5-3/4” Hardwood D-Grip 52” CWT-12575 DG
5-3/4” Hardwood Straight 69” CWT-12575 SHH
5-3/4” Aluminum T-Grip 46” CWT-13575 ATH
5-3/4” Aluminum Straight 69” CWT-13575 SAH
7” Hardwood D-Grip 52” CWT-12700 DG
7” Hardwood Straight 69” CWT-12700 SHH
7” Aluminum T-Grip 46” CWT-13700 ATH
7” Aluminum Straight 69” CWT-13700 SAH
ALUMINUM WALL HOES Made from 6061-T6 tempered aluminum, these light but strong hoes are excellent for moving concrete in poured walls. Features a 1-3/8” x 60” replaceable straight handle in either Aluminum or Ash Hardwood.
THREE POPULAR BLADE SIZES — TWO DIFFERENT HANDLE OPTIONS
BLADE WIDTH
HANDLE TYPE PART NO.
3-1/2” Ash Hardwood CWT-10350
5-3/4” Ash Hardwood CWT-10575
7” Ash Hardwood CWT-10700
3-1/2” Aluminum CWT-11350 AH
5-3/4” Aluminum CWT-11575 AH
7” Aluminum CWT-11700 AH
Wood Handle
Aluminum Handle
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 13
CONTROL JOINT GROOVERS Cutting control joints is a snap with our new streamlined groovers. Made from durable aluminum, these groovers feature a machined cutting nose on both ends as well as a sight tab to ensure a straight joint. Use our 12” single ended hand held model for cleaning up joint ends. Makes 1” deep joints; other depths are available as well. Attach our snap lock handle socket (sold separately) or use your own favorite adjustable bracket.
LENGTH TYPE PART NO.
1 FT Hand CWT-54JG-12
2 FT Walking CWT-54JG-24
3 FT Walking CWT-54JG-36
4 FT Walking CWT-54JG-48
5 FT Walking CWT-54JG-60
TYPE PART NO.
Threaded CWT-58 TH
Snap Lock CWT-58 SLH
REPLACEMENT BLADES
AVAILABLE
SLAB CUTTER Made from high strength alloy aluminum, our hard wearing slab cutters are available in two different blade depths to ensure 25% cut on concrete slabs up to 8” thick. Edges are flared up to prevent finish marring. Bi-directional.
LIGHTWEIGHT AND EASY TO HANDLE!
BLADE DEPTH
PART NO.
1-1/8” CWT-22 SC 118
2” CWT-22 SC 200
ALUMINUM HAND GROOVERS Made from 1/8” thick 6061-T6 hard-rolled tempered aluminum, our hand held groovers are great for smaller jobs and detail work. Both sizes are 8” long, with a replaceable blade 1-1/8” deep with a 3/8” radius. The blade is cut flush with the back edge of the float, allowing full depth grooving against a bulk head or form line.
FLOAT WIDTH
PART NO.
12” CWT-20 HHG
4” CWT-21 HHG
REPLACEMENT BLADES
AVAILABLE
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 14
STAINLESS WALKING GROOVERS Made from heavy duty stainless steel, these walking groovers are great for long reach jobs. Float base is 10” x 10” with 3/4” high sides for running down straight edges such as our HAND SCREEDS. Features a multiple-angled swivel head to allow any handle positioning. Blade is 1-1/8” deep with a 3/8” or 1/2” radius. Snap-Lock version fits both 1-3/8” and 1-3/4” handles. Threaded version fits all standard threaded handles.
TYPE RADIUS PART NO.
Snap-Lock 3/8” CWT-27 SWGSL 038
Snap-Lock 1/2” CWT-27 SWGSL 050
Threaded 3/8” CWT-27 SWGTH 038
Threaded 1/2” CWT-27 SWGTH 050
ALL WELDED
RIVET FREE
STAINLESS STEEL
STAINLESS HAND GROOVERS Made from heavy duty stainless steel, these groovers are great for smaller jobs and detail work. Float base is 10” x 10” with 3/4” high sides for running down straight edges such as our HAND SCREEDS. Two different widths and two different radii available.
ALL WELDED
RIVET FREE
STAINLESS STEEL
FLOAT WIDTH
RADIUS PART NO.
4” 3/8” CWT-27 SHG04 038
4” 1/2” CWT-27 SHG04 050
10” 3/8” CWT-27 SHG10 038
10” 1/2” CWT-27 SHG10 050
ALUMINUM WALKING GROOVERS Made from 1/8” thick 6061-T6 hard-rolled tempered aluminum, our walking groovers are great for long reach jobs. Float base is 9” x 12”, blade is 9” long, 1-1/8” deep with a 3/8” radius.
Snap-Lock version fits both 1-3/8” and 1-3/4” handles.
Threaded version fits all standard threaded handles.
Universal version has a 6-hole pattern to accept any standard bracket.
REPLACEABLE BLADES!
TYPE PART NO.
Snap-Lock CWT-20 SLH
Threaded CWT-20 TH
Universal CWT-20 UMB
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 15
ALL WELDED
RIVET FREE
STAINLESS STEEL
ALL WELDED — RIVET FREE
CLEVELAND STYLE SIDEWALK EDGERS Made from 12 ga steel or 16 ga stainless steel, these hand held edgers are popular in the Midwest. All edgers feature our comfortable float type handle. Other sizes and radii are also available, just give us a call!
SIZE RADIUS PART NO.
8-3/4” x 3-1/2” 1/2” CWT-56 SE 06
8-3/4” x 3-1/2” 1/2” CWT-56 SE 06-S
8-1/4” x 2” 1/2” CWT-56 SE 07
8-1/4” x 2” 1/2” CWT-56 SE 07-S
8-3/4” x 2-1/2” 1/2” CWT-56 SE 08-S
MATERIAL
12 GA Steel
16 GA Stainless
12 GA Steel
16 GA Stainless
16 GA Stainless
8-3/4” x 2-1/2” 1/2” 12 GA Steel CWT-56 SE 08
STAINLESS HAND EDGERS Made from heavy duty stainless steel, our hand held edgers are available in five popular radii. All edgers are 9” x 3-1/2” and feature our comfortable float handle. Choose our MITERED version for close quarter edging on inside angles that are hard to finish.
CORNER STYLE
RADIUS PART NO.
Squared 1/4” CWT-27 SHE 04 025
Squared 3/8” CWT-27 SHE 04 038
Squared 1/2” CWT-27 SHE 04 050
Squared 3/4” CWT-27 SHE 04 075
Squared 1” CWT-27 SHE 04 100
Mitered 1/4” CWT-27 MHE 35 025
Mitered 3/8” CWT-27 MHE 35 038
Mitered 1/2” CWT-27 MHE 35 050
Mitered 3/4” CWT-27 MHE 35 075
Mitered 1” CWT-27 MHE 35 100
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 16
STAINLESS HAND EDGERS Made from heavy duty stainless steel, our HEAVY DUTY hand held edgers are available in five popular radii. Turned up blade edges prevent gouging and allow easy two-way edging. All edgers are 10” x 10” and feature our comfortable float handle.
USES STANDARD REPLACEABLE FLOAT HANDLE
ALL WELDED
RIVET FREE
STAINLESS STEEL
RADIUS PART NO.
1/4” CWT-27 SHE 10 025
3/8” CWT-27 SHE 10 038
1/2” CWT-27 SHE 10 050
3/4” CWT-27 SHE 10 075
1” CWT-27 SHE 10 100
STAINLESS WALKING EDGERS Made from heavy duty stainless steel, our walking edgers are available in five popular radii. Base is 10” x 10” with turned up plate edges to prevent gouging. Features a multiple-angled swivel head to allow any handle positioning. Snap-Lock version fits both 1-3/8” and 1-3/4” handles (NOT INCLUDED). Threaded version fits standard threaded handles (NOT INCLUDED). Wooden Handle version INCLUDES our 60” Ash handle.
HANDLE TYPE
RADIUS PART NO.
Hardwood 1/4” CWT-27 SWEWH 025
Hardwood 3/8” CWT-27 SWEWH 038
Hardwood 1/2” CWT-27 SWEWH 050
Hardwood 3/4” CWT-27 SWEWH 075
Hardwood 1” CWT-27 SWEWH 100
Snap-Lock 1/4” CWT-27 SWESL 025
Snap-Lock 3/8” CWT-27 SWESL 038
Snap-Lock 1/2” CWT-27 SWESL 050
Snap-Lock 3/4” CWT-27 SWESL 075
Snap-Lock 1” CWT-27 SWESL 100
Threaded 1/4” CWT-27 SWETH 025
Threaded 3/8” CWT-27 SWETH 038
Threaded 1/2” CWT-27 SWETH 050
Threaded 3/4” CWT-27 SWETH 075
Threaded 1” CWT-27 SWETH 100
ALL WELDED RIVET FREE STAINLESS STEEL
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 17
CURB & GUTTER HAND TOOLS Made from hard wearing but flexible 9” x 9” stainless steel, our curb & gutter tools have just the right feel. Mitered corners help in close quarters. All welded construction—rivet free. Available in 7 different radii.
RADIUS CURB TOOL
PART NO. GUTTER TOOL
PART NO.
1/4” CWT-24 OHH 025 CWT-24 IHH 025
3/8” CWT-24 OHH 038 CWT-24 IHH 038
1/2” CWT-24 OHH 050 CWT-24 IHH 050
3/4” CWT-24 OHH 075 CWT-24 IHH 075
1” CWT-24 OHH 100 CWT-24 IHH 100
1-1/2” CWT-24 OHH 150 CWT-24 IHH 150
2” CWT-24 OHH 200 CWT-24 IHH 200
WALKING CURB & GUTTER TOOLS Made from hard wearing but flexible 9” x 9” stainless steel, these curb & gutter tools have just the right feel. Available in 7 different radii. Features a multiple-angled swivel head to allow any handle positioning. Snap-Lock version fits both 1-3/8” and 1-3/4” handles (NOT INCLUDED). Threaded version fits all standard threaded handles (NOT INCLUDED). Wooden Handle version INCLUDES our 1-3/8” x 60” Ash handle.
HANDLE TYPE
RADIUS CURB TOOL
PART NO. GUTTER TOOL
PART NO.
Wooden 1/4” CWT-24 OWWH 025 CWT-24 IWWH 025
Wooden 3/8” CWT-24 OWWH 038 CWT-24 IWWH 038
Wooden 1/2” CWT-24 OWWH 050 CWT-24 IWWH 050
Wooden 3/4” CWT-24 OWWH 075 CWT-24 IWWH 075
Wooden 1” CWT-24 OWWH 100 CWT-24 IWWH 100
Wooden 1-1/2” CWT-24 OWWH 150 CWT-24 IWWH 150
Wooden 2” CWT-24 OWWH 200 CWT-24 IWWH 200
Snap-Lock 1/4” CWT-24 OWSL 025 CWT-24 IWSL 025
Snap-Lock 3/8” CWT-24 OWSL 038 CWT-24 IWSL 038
Snap-Lock 1/2” CWT-24 OWSL 050 CWT-24 IWSL 050
Snap-Lock 3/4” CWT-24 OWSL 075 CWT-24 IWSL 075
Snap-Lock 1” CWT-24 OWSL 100 CWT-24 IWSL 100
Snap-Lock 1-1/2” CWT-24 OWSL 150 CWT-24 IWSL 150
Snap-Lock 2” CWT-24 OWSL 200 CWT-24 IWSL 200
Threaded 1/4” CWT-24 OWT 025 CWT-24 IWT 025
Threaded 3/8” CWT-24 OWT 038 CWT-24 IWT 038
Threaded 1/2” CWT-24 OWT 050 CWT-24 IWT 050
Threaded 3/4” CWT-24 OWT 075 CWT-24 IWT 075
Threaded 1” CWT-24 OWT 100 CWT-24 IWT 100
Threaded 1-1/2” CWT-24 OWT 150 CWT-24 IWT 150
Threaded 2” CWT-24 OWT 200 CWT-24 IWT 200
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 18
CONCRETE FINISHING BROOMS Brush down your new concrete with our top quality polypropylene finishing brooms. Four sizes available, all featuring solid hardwood lacquered blocks and black polypropylene bristles. Accepts standard threaded handles. 36” and 48” sizes also require a brace. 60” metal tipped handle, and brace where needed, are included.
DESCRIPTION PART NO.
18” Finishing Broom w/handle CWT-40CB-18
24” Finishing Broom w/handle CWT-40CB-24
36” Finishing Broom w/handle & brace CWT-40CB-36
48” Finishing Broom w/handle & brace CWT-40CB-48
18” Replacement Broom Head CWT-40CB-18-H
24” Replacement Broom Head CWT-40CB-24-H
36” Replacement Broom Head CWT-40CB-36-H
48” Replacement Broom Head CWT-40CB-48-H
1-1/8” X 60” Wood Handle with Metal Threads CWT-41HM
Heavy Duty Handle Brace CWT-41B
CURB BRUSH Use our Curb Brush for hand smoothing newly poured concrete after floating. Features a hardwood block and pure horsehair bristles.
SIZE PART NO.
12” CWT-39CB-12
100% pure horsehair bristles!
HEADS, HANDLES AND BRACES ALSO AVAILABLE
SEPARATELY
SIZE PART NO.
1-1/8” X 60” Wood Handle w/ Metal Threads CWT-41HM
15/16” x 60” Hardwood Threaded Handle CWT-41 HS 60
THREADED WOOD HANDLES Choose from either our Heavy Duty metal tipped handle or our sturdy standard threaded handle. Both fit all standard threaded holes.
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 19
ALUMINUM MORTAR HOE Mix mortar faster and easier with our well balanced Aluminum Mortar Hoe. The tough 6061-T6 tempered aluminum head is 9” x 7” with a wide oval hole for better mixing. The replaceable handle is 1-3/8” x 60” ash hardwood.
WEIGHS ONLY 3 LBS!
PREPARE MORTAR FASTER! SIZE PART NO.
— CWT-6 MHO
ALUMINUM MORTAR HOD There is no comparison between our hods and the flimsy hods you may find elsewhere! Climb ladders more safely by using our heavy duty Aluminum Mortar Hod. The durable and rustproof 6061-T6 tempered aluminum body is 24” x 12” x 1/8” thick and cleans up easily with water. The replaceable handle is 1-3/8” x 60” ash hardwood.
LIGHTWEIGHT AND HEAVY DUTY
HOLD UP TO
110 LBS OF MORTAR!
CAPACITY PART NO.
110 LBS CWT-4 MH
ALUMINUM BRICK HODS Climb ladders more safely by using our Aluminum Brick Hods. The durable and rustproof 6061-T6 tempered aluminum body is 24” long and cleans up easily with water. The replaceable handle is 1-3/8” x 60” ash hardwood.
HEAVY DUTY AND LIGHTWEIGHT
HOLDS UP TO 20 BRICKS
SIZE PART NO.
20 NEW BRICKS CWT-5 BH
14 KING BRICKS CWT-5 KINGBH
MASONRY TOOLS
Czar Weld Tools, Inc. · Phone: 800-245-3544 · Fax: 636-375-3625 20
ASPHALT TOOLS
ASPHALT LUTES Made from high strength alloy aluminum, these asphalt lutes feature a 30” blade and are a standard in the industry. Choose from either a 1-3/8” x 72” stout Ash Handle or our practically indestructible heavy wall Aluminum Handle.
REPLACEMENT HANDLES AND BLADES AVAILABLE
SPECIAL SIZES AVAILABLE
HANDLE TYPE PART NO.
Wooden CWT-31 ALWH
Aluminum CWT-31 ALAH
SERRATED ASPHALT LUTES Made from high strength alloy aluminum in a special T-shape design, these asphalt lutes come in several blade lengths and are a standard in the industry. Choose either a 1-3/8” x 72” stout Ash Handle or our practically indestructible heavy wall Aluminum Handle.
REPLACEMENT HANDLES AND BLADES AVAILABLE
BLADE LENGTH
PART NO. W/ WOODEN
HANDLE:
PART NO. W/ ALUMINUM
HANDLE:
24” CWT-34 SALWH 24 CWT-34 SALAH 24
32” CWT-34 SALWH 32 CWT-34 SALAH 32
36” CWT-34 SALWH 36 CWT-34 SALAH 36
42” CWT-34 SALWH 42 CWT-34 SALAH 42
ASPHALT SEALER SQUEEGEE BRUSH Distribute blacktop sealer fast and economically. Features 18” wide by 2” trim palmyra filling staple set in a hardwood block. Threaded hole accepts standard handles. Hardwood threaded handle included.
HEADS AND HANDLES ALSO
AVAILABLE SEPARATELY
DESCRIPTION PART NO.
Squeegee Brush w/ Handle CWT-42 BTB
Head Only CWT-42 BTH
15/16” x 60” Hardwood Threaded Handle
CWT-41 HS 60
Phone: 636-671-4187 Toll Free: 800-245-3544
Fax: 636-375-3625 e-mail: sales@czarweldtools.com
CZAR WELD TOOLS, INC. 4619 Dulin Creek Road House Springs, MO 63051
OUR MORTAR HOD TAKES ON A MERCURY