Post on 23-Jan-2018
CURRICULUM VITAE
NAME : Mohd Amirul Mukminin bin Alias GENDER : Male
DATE OF BIRTH : 7 October 1989 NRIC No. : 891007-06-5221
NATIONALITY : Malaysian MARITAL STATUS: Married
CONTACT NO. : +6013-9959108 HEALTH : Excellent
EMAIL : amirulmukminin89@gmail.com LANGUAGE : Malay and English
ADDRESS : Simpang Kampung New Zealand,
26500 Maran, Pahang.
CAREER OBJECTIVE
Involved in oil and gas industry since 2010 and continuously developing into multi -skilled professional extending rich
corporate experience. Familiar with new plant construction in mechanical and piping installation, plant rejuvenation
& revamp, and also plant shutdown turnaround.
ACADEMIC BACKGROUND
JOB DESCRIPTION Preparation of project quality procedures suits to project requirement.
To ensure the implementation of Project Quality Plan and to ensure with the project quality requirement.
To perform planning on QC inspection activities and delegate the duty to QC inspector and QC supervisor.
To update and monitor inspection status of piping fabrication, installation, test package status, and quality
documents submission.
Preparation of Modification / Repair Procedure for DOSH Equipment including method of repair and inspection
requirement.
Planning on Prequalify Welding Procedure Specification and WPS suits to project welding requirement.
Planning and execution of Welder Qualification Test based on sub-contractor request.
Monitoring Welder Performance Record based on NDT based on project requirement.
To raise major quality issue to construction team meeting.
Review and issue Non Conformance Report as well as approve resolution for corrective action.
To coordinate with clients for inspection planning and status.
Review the NDT status and test package prior pressure test activity.
January 2008 – February 2012 Universiti Teknologi PETRONAS (UTP), Tronoh, Perak Mechanical Engineering Major / Minor :Material / Manufacturing
January 2002 – December 2006 Sekolah Menengah Sains Sultan Haji Ahmad Shah (SEMSAS),Kuantan SPM : 8A 3B PMR : 8A
Capable to handle inspection for mechanical static and rotating installation, equipment repair and piping above
ground as well as underground piping installation.
Preparation of mechanical and piping test package including weld summary, weld mapping drawi ng, welding
procedures specification selection, fit up and visual inspection report.
Controlling the QC tool record at site regarding the calibration date and quantity.
EMPLOYER
1. COMPANY : SANKYU (M) SDN BHD
Position : Senior Engineer (QAQC Department)
PERIOD : March 2012 to present
PROJECT INVOLVED
1) Project : 1) Major Turnaround LCTM 2017
2) TE-3 Tray Modification Project
Client : Lotte Chemical Titan Malaysia, Pasir Gudang.
Position : QAQC Lead Engineer
Project Description: Mechanical Static Equipment Cleaning,12 Nos. Tower Tray Modification Project, Defect
Piping Replacement
2) Project : 2-EH Acid Plant Project, BASF Petronas Chemical Sdn.Bhd
Client : BASF Petronas Company / Toyo Engineering Sdn Bhd
Position : QAQC Lead Engineer
Project Description : Construction of 2-EH Acid Plant Project including 36,000 Dia-inch piping and installation
columns, drum vessel, heat exchangers and pumps.
3) Project : Major TA 2015 Shell Refining Company Port Dickson.
Client : Shell Refining Company, Port Dickson.
Position : QAQC Engineer
Project Description: Regenerator and Reactor shutdown services, Static Equipment cleaning works, Piping &
valve replacement and modification.
Period : February 2015 – October 2015
4) Project : Plant Rejuvenation & Revamp 4 Phase 2, GPP4.
Main Contractor : Toyo Engineering Sdn Bhd
Position : QAQC Engineer
Project Description : 6 Unit New Pressure Vessel and Heat Exchanger Installation, 14 Unit Catalyst
Unload/Loading, 200 Unit Rotating Equipment Refurbishment and New Installation of Pump, Steam Turbine and
Compressor.
Period: : May 2014 to January 2015
5) Project : PRR4 Flare Refurbishment Project Phase 1.
Main Contractor : Toyo Engineering Sdn Bhd
Position : QAQC Engineer
Project Description: Flare Tip Refurbishment, Fuel Gas Line Replacement, Structure.
Blasting and Painting, Application of Anti-Corrosion Tape (ACT) &,
Air Craft Warning Light (ACWL), Replacement and Motor refurbishment Installation.
Period : December 2013 to April 2014.
6) Project : Immobilized Slurry Reactor (IMSR) Shell MDS, Bintulu.
Main Contractor : Chiyoda Malaysia Sdn Bhd.
Position : QAQC Engineer
Project Description : Installation of Reactor R-3139, Structure Module, 2 units of Pump,
Existing HPS Demo Tie-In, OSBL & ISBL Piping and Tubing.
Period : July 2013 to December 2013
7) Project : Phase 2 Lamps Up Lynas (M) Sdn Bhd, Gebeng Kuantan.
Main Contractor : Toyo Thai (M) Sdn Bhd
Project Description: 1) Installation of General Equipment - Static and Rotating Equipments, Machineries,Conveyor,
Filter Press, and Thickener.
2) Installation the 2 unit Rotary Kiln (RK-C and RK-D) packages.
Period: March 2012 – June 2013
8) Company: Asturi Metal Builder (M) Sdn Bhd
Position: QC Inspector Trainee
Period: June 2010 – January 2011
Project Description:
1) Project: Fabrication of 6 unit of pressure vessel Mercury Removal Unit (MRU)
Filter Coalescer
Period: June 2010 – Jan 2011 Client: Talisman Malaysia Ltd.
2) Project: Fabrication Of 4 Units Of Tube Bundle & 1 Unit Complete Shell & Tube Heat Exchanger TANP 2011
Period: August 2010 – Jan 2011 Client: Petronas Penapisan Terengganu (PPT).
3) Project: Provision Of Procurement And Construction PM329 East Piatu Development Project (1 unit Pressure
Vessel)
Period: August 2010 – Jan 2011 Client :Kencana HL Sdn. Bhd.
TECHNICAL CERTIFICATION SOFTWARE SKILL
1. CSWIP 3.1 Welding Inspector by TWI 2. AutoCAD 2013 Training by PCSS Bintulu. 3. Occupational Safety and Health for Supervisor by Niosh
Bintulu 4. Authorised Entrant & Standby Person For Confined
Space (AESP) by NIOSH Kemaman. 5. Swagelok Tubing and Valve Fitting by KL Valve, Bintulu
1. Microsoft Office Word, Power Point, Excel 2013 2. AutoCAD 2014 3. Microsoft Project 2016
ENGINEERING & CONSTRUCTION MECHANICAL ENGINEERING
DEPARTMENT PERSONALITY AND
MANAGEMENT
Rahimi Iskandar QC Manager, Sankyu (M) Sdn Bhd. Phone: 0122939088 Email: rahimi.iskandar@sankyu.com.my
A.P Ir Dr. Mokhtar Che Ismail Associate Professor, Mechanical Engineering Department, UniversitiTeknologi Petronas, 31750 Tronoh, Perak Darul Ridzuan. Phone: 019-5753012 (Mobile) 05-3687023 (Office) Email : mokhtis@petronas.com.my
Mr. Nor Idham B Che Ghani Career Advisor, Student Support Services Department, UniversitiTeknologi PETRONAS, 31750 Tronoh, Perak Darul Ridzuan. Phone : 016-592 9462 (Mobile) Fax : 05-368 7296 Email:idhamg@petronas.com.my