Post on 21-Jun-2020
1
C.V.
Assistant Professor Dr. Hakim Samawi Sultan
PROFILE:
Dr. Hakim S. Sultan Aljibori
Tel: 70770780870 (Handphone)
E- mail: hakimaljobori@gmail.om
Education:
PhD in Mechanical Engineering -University Putra Malaysia-UPM, Malaysia (2007), Overall
CGPA: 3.18 out of 04 (Transport systems design and FEA)
Master degree in Aerospace Eng. Dept., University Putra Malaysia-UPM, Malaysia (2004),
Overall CGPA: 3.75/04 (experimental Investigations in Energy Systems)
B.Sc. In Mechanical Engineering – Baghdad University- Iraq
Certificate in information Technology (IT) Cambridge University Program
Work experience
The Engineering Sciences gave me a strong experience and background (Theoretical and practical) by
various modes: lectures, tutorials, laboratories, assessment and research projects
From To Details
2011 2016 Assistant Professor, Engineering Department, College of applied science-
Sohar- sultanate of Oman
2010 2011 Associate Professor, , Faculty of Engineering, Asia Pacific University of
Technology and Innovation, Kuala Lumpur, Malaysia (Lecturer and Head of
Research Center)
2007 2010 Assistant Professor, Mechanical and Materials Department, Faculty of
Engineering, University of Malaya UM, Malaysia
2004 2007 Research Fellow, (PhD Candidate) Mechanical Engineering Dept.
University Putra Malaysia UPM, , Malaysia
2002 2004 Master Candidate, Aerospace Department, energy systems of Composite
materials in transport applications, UPM, Malaysia
1996 2002 Tutor in Technical Training center, Laboratory engineer, College of
Engineering, Hoon
1995 1996 Maintenance Engineer, LG Company, Product and maintenance Engineer,
Amman, Jordan
1991 1995 Mechanical Engineer, ALlotus Company for ME and EE works
2
Courses Taught: (Undergraduate and Postgraduate Levels)
Diploma and Short Courses
Engineering Drawing Mechanical Equipment Instrumentation &
Control
Air-conditioning Heat transfer Health safety and
environment (HSE)
Simulation and control Metal Arc Welding Machine tools
Boilers, Pumps and Valves
design and maintenance
System Measurements (Temperature,
pressure and flow measurements)
Materials and
Technology
Postgraduate Courses
Advance Materials Research Methodology and Technical writing
Finite Element Methods and
Simulations
Stress Analysis (elastic and plastic analysis of
structures))
Measurement & Instrumentation Graduation Projects
Undergraduate Courses (Partial List)
Engineering Materials Pressure Vessel and piping System Design for
(Oil and Gas)
Fluid Mechanics Safety and Risk
Engineering Drawing/ Manual and
using CAD software Measurement & Instrumentation
Mechanical Equipment Strength of Materials / Mechanics of Materials
Engineering Management
Research methodology Thermodynamics
Manufacturing Processes Finite Element Methods (FEM) and simulation
using (ANSYS - Solid Work and LS-DYNA)
Machine tools and workshop Heat Transfer
Engineering Mechanics (Static and
Dynamics) Physics
Automation and Mechatronics Vibration
Capstone projects and Final Year
Projects Engineering Economics
Numerical Analysis Introduction to Energy and Energy Systems
Preparation of the lab experimental procedure, setup of the experimental apparatus
Good Experience in ANSYS/LS-DYNA /Solid Work- 3D Modeling Software, AUTO CAD
Application and CNC machines programming
3
Skills and knowledge
My Research Interests on Transportation design & Safety, Crashworthiness, Engineering
materials, energy systems, Nano Materials, CAD/CAM Systems, FEA and design of solar
thermal systems
Good knowledge in Ship design and Ship Performance
Worked as Head and member of Quality Assurance (QA) committee
Participate in activities related to ABET accreditation, general criteria, program assessment and
Evaluation (PI, PEO, SO)
Able to work on own initiative or as part of a team
Able to lead and grow a high performance team and administration works
Research development, new research proposals, research grants and funding (external or internal
Sources)
Journal paper writing, oral and written communication and presentation skills.
Can deal with administrative duties competently and flexible
Strong background in Engineering Computer Skills like; ANSYSIS, LS- DYNA, Solid Work,
Auto CAD, Master CAM, software (Design for 2D and 3D, analysis, modeling and
simulations by using Finite Element Methods), and able to learn other CAE solvers
Good knowledge of operation and programming Computer Numerical Control (CNC)
Machines using -G- codes (MASTER CAM Software)
Many reviewed papers for Journals.
Good knowledge and use of English in speaking, writing and reading
Preparation of the lab experimental procedure, setup of the experimental apparatus
Presenter in a number of seminars and Workshops
External Examiner for Master & PhD Students (Thesis and dissertation)
Member in Accreditation and Quality Assurance committee
Awards
Gold Medal, Design and Manufacturing of Wind-Solar hybrid renewable energy System, UM
Research, Invention and innovation Expo, University of Malaya, Malaysia, 4 – 6 February
2010 (The best Award)
Best Paper Award, Design and Manufacturing of renewable energy System, UITM
Conference, 2010, Shah Alam, Malaysia
Gold Medal, knowledge and Science day, 2009, Ministry of higher education
4
Best Researcher in the faculty of Engineering (for 2009)-University of Malaya, UM,
Malaysia
Books: An Experimental Investigation and Finite Element Analysis of Composite
Energy Absorption Systems, ISBN: 978-1-4020-6238-4 (Print) 978-1-4020-6239-1 (Online),
Springer
PUBLICATIONS:
My profile in Google Scholar is:
https://scholar.google.com/citations?hl=ar&user=1iVP7DEAAAAJ&view_op=list_works&sortby=pubdate
5
International Journals and conferences
1- A Review of Nano Piezoelectric Devices in Biomedicine Applications, Journal of Nanotechnology
Review, Accepted 2017
2- Load-displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected
to compressive load, journal of Materials and Design, ELSEVIER V.31 pp. 466–474
3- A low frequency hybrid harvester with ring magnets, Journal of Sustainable Energy Technologies
and Assessment,v13 (2016) 23–30, Contents lists available at ScienceDirect.com, ELSEVIER
4- A review of vibration-based MEMS hybrid energy harvesters, Journal of Mechanical Science and
Technology 29 (11) (2015) 5021-5034, DOI 10.1007/s12206-015-1050-9-Springer
5- Utilization of composite’s tensile properties for energy absorbing systems, International journal
of composite structures, Elsevier, Volume 75, Issues 1-4, Pages 29-38
6- An experimental study of heat transfer to turbulent separation fluid flow in an annular passage,
International Journal of Heat and Mass Transfer, Elsevier, Volume 54, Issue 4, 2011, Pages
766-773
7- Experimental Study of Composite Structures in Automotive Applications, international journal on
Mechanical and material Engineering, Vol.3, pp 47-54
8- Evaluation of the spatial distribution of shared electrical generators and their environmental
effects: Case Study in Baghdad-Iraq
International Journal of Engineering & Technology IJET-IJENS Vol: 14 No: 02
9- Novel Design of Solar Receiver in Concentrated Solar Power System, International Journal of
Multidisciplinary Research and Advances in Engineering, (IJMRAE), Vol. 5, No. I 2013, pp. 211-
226, impact factor 0.1615
10- Alternative Materials for Pipelines under Internal Pressure Loading and its Application in
Sultanate of Oman , Proceedings of International Conference on Engineering and Information
Technology “ICEIT2012” Sep. 17th – 18th, 2012, Toronto-Canada Published by Maple
International Centre – Canada 2012 ISBN 978-1-77136-064
11- Design and Testing of Solar Water Heaters with Its Calculation of Energy” Int. J. of Mechanical
Computational and Manufacturing Research, Vol. 1. No.2, (2012) pp. 62-66
12- Technical Overview for Characterization and Trends on the Field of Nanocomposite with Their
Applications” European Journal of Scientific Research, Vol.70 No.1 (2012), pp. 159-168
13- A comparative Analysis of Experimental and Numerical Investigations of Composite Tubes
under Axial and Lateral Loading, Journal of Basic and Applied Sciences, ISI J, 4(8): pp.3077-
3085, 2010
14- Energy Absorption Characteristics and Crashing Parameters of Filament Glass Fiber /Epoxy
Composite Tubes, European Journal of Scientific Research, Vol.39 No.1 (2010), pp.111-121
15- Non-Linear Dynamic Analysis of Composite Conical Shell Structures, International Journal of
Engineering & Technology (IJET) Vol: 9 No: 9, pp. 411- 422 (2010)
16- Fiber Reinforced Composite (FRC) Structures with Potential Applications, International Journal
of Applied Engineering Research (IJAER). 2009, V. 4 No. 10 pp. 1939–1954 (2009)
17- Quasi-Static Axial Crushing of a ±45° Fiber Orientation Angle with a Different Number of Layers:
Part 1, Experimental Study, American Journal of Scientific Research, Issue 4), pp72-84 (2009)
18- A study on Cold Forging Die Design Using Different Techniques, International Journal of
Modern Applied Science, Canadian Center of Science And Education, Canada, V 3, No.3, pp.143-
154. (2009)
6
19- Finite Element Analysis of Sheet Metal Forming Process, European Journal of Scientific
Research, Vol.33 No.1 pp.57-69, (2009),
20- The Design of Light Jet Aircraft, journal of WSEAS transactions on applied and theoretical
mechanics, Volume 4, Issue 2, pp 85-94 (2009)
21- Finite Element Analysis of Cut-Outs composite Materials Subjected to Compressive Buckling
Load, National Symposium on Innovations in Information Technology (NSIIT15), April 28th – 29th
, 2015, College of Applied Sciences -Sohar (Oman)
22- Numerical Investigations Into The Crushing Behavior Of conical Shell System, International
Journal of Engineering and Technology, Vol. 4, No. 1, , pp. 77-85 (2007)
23- Experimental optimization of composite collapsible tubular energy absorber device”.
International Journal of thin- walled Structures. Volume 44, Issue 11, Elsevier, Pages 1201-1211
(2006)
24- Effect of Design Variation on Saved Energy of Concentrating Solar Power Prototype”
Proceedings of the World Congress on Engineering 2012 Vol III, WCE
25- Energy Absorption of Thin-Walled Composite Tubes Subjected to Quasi-Static Compression
Load, The International Conference on Industrial and Intelligent Information (ICIII 2010) 23 to 25
April 2010 Bangkok, Thailand
26- Study of Compressed Air and advanced methods to increase efficiency and emission reduction
on Malaysia industries, 7th National energy congress 2009
27- Effect of fiber orientation Angle on energy Absorption Capability in fiber reinforced polymers,
proceeding, international conference on Nano-technology , 14-17 December 2009, Malaysia
28- An investigation on the effect of resin type and geometry on energy absorption Capability in
energy absorbers, proceeding, international conference on Nano-technology , 14-17 December
2009, Malaysia
29- Non-Linear Dynamic analysis of Composite cone, proceeding in international conference on
applications and design in Mechanical Engineering (ICADME 2009), 11-13 Oct. 2009, Page 118,
Penang Malaysia
30- Finite Element Analysis of Sheet Metal forming process, International Conference on
Mechanical, Aeronautical and Manufacturing, Engineering" August 26-28, 2009. Singapore
31- Thermal Analysis and Simulation of Laser Hair Treatment WCSET 2009: World Congress on
Science, Engineering and Technology, Tokyo, Japan, May 27-29, 2009
32- Numerical Modeling of Composite Conical Thin-Shell Systems, 7th international conference on
composite science and technology ( ICCST7), 20-22 January 2009, proceeding in American
University of Sharja, UAE.
33- proceeding in international conference on applications and design in Mechanical Engineering
(ICADME 2009), 11-13 Oct. 2009, Page 92, Penang Malaysia
34- An Experimental Study of Turbulent Heat Transfer Separation External in an Annular Passage,
proceeding in international conference on applications and design in Mechanical Engineering
(ICADME 2009), 11-13 Oct. 2009, Page 66, Penang Malaysia
35- Three-Dimensional Analysis of Balanced And Symmetric Thick Walled Filament Wound
Composite Tubes Under Internal Pressure Loading, International Conference on Project
Management and engineering (ICoPM 2008) 18-20 Nov. 2008, Malaysia, pp 472- 485
36- Finite Element Analysis of Fiber Reinforced polymer composite reinforced Concrete Beam,
International Conference on Project Management and engineering (ICoPM 2008) 18-20, 2008,
Malaysia, pp 466 – 471
7
37- Finite Element Analysis of Fold over Bicycle, International Symposium on Sustainable
Transportation incorporating Malaysian Universities Transport Research Forum Conference 2008
(MUTRFC08). University Technology Malaysia. 12-13 August 2008
38- Influence of radiation on double diffusive flow in a vertical plate embedded with porous
medium, International conference on MEMS 2008, 22-23 Oct 2008, pp 83-89. Bhatkal, India
39- Study on Optimization of Composite Conical Structures for Crashworthiness Applications, 13th
international conference on applied mechanics and Mechanical engineering (AMME-13) May 27-
29, 2008, Cairo, Egypt
40- Effect of Geometry and Crushing Behaviour of Composite Material Tubes on Energy
Absorption Systems, International Conference on Plant Equipment and Reliability (ICPER 2008),
proceeding pp. 1-8, 27-29 March, Kuala Lumpur, Malaysia, 2008
41- “Numerical Investigations into the Crushing Behaviour of Conical Shell System, 2nd International
Engineering Convention 2007, Jeddah, 10 –14 March 2007.
42- The Finite Element Analysis of Composite Laminates Shells Structures. International conference
of composite and nano-structures ( iC2MS-06), Malaysia, 2006
43- Dynamic Crushing and Impact Energy Absorption of Composite Laminates Conical Structures,
NSPM-06 National Symposium on Polymeric Materials, Malaysia 2006.
44- Mokhtar “Numerical Investigations into the Crushing Behaviour of Shell System” 1st Reional
International conference on Vehicles engineering and Technology (RIVET-06), July, Malaysia,
2006
45- Numerical investigations of the crushing behavior of conical shell system” international advance
technology congress (ATC/2005) Malaysia 2005.
46- Effect of Material distribution and crushing of energy absorber devices”. The EEVEN
International Conference on Composite Engineering, ICCE/11, South Carolina, USA, 8-14
August 2004.
47- “Experimental Optimization of composite collapsible Energy absorber devices” the second
International conference on steel& composite structures, ICSCS’04, 2-4 September 2004, Seoul,
Korea.
48- Experimental investigations and design optimization of composite tubes under internal Pressure
in pipeline applications, international journal of pressure vessels
49- An experimental investigation of multi-layers thin-wall cylinders under internal pressure loading
(on-going)
50- Thin-walled composite tubes by using fillers subjected to quasi-static axial compression,
International Journal of thin- walled Structures (on-going)
Computer literacy:
Good knowledge in Computer drafting and technical drawing and AUTO CAD applications
Design, analysis, modeling and finite element methods using ANSYSIS, LS- DYNA, and
LUSAS , Solid Work and Master CAM software
Good knowledge of operation and programming Computer Numerical Control (CNC)
Machines using -G- codes (MASTER CAM Software)
Proficient in using most of Microsoft office components
8
Moderate knowledge in MATLAB software
Invited Talks and Keynotes:
Keynote Speaker: The International Conference on Industrial and Intelligent Information (ICIII
2010) 23 to 25 April 2010 Bangkok, Thailand
Keynote Speaker: International Conference on Plant Equipment and Reliability (ICPER 2008), 1-
8, 27-29 March, Kuala Lumpur, Malaysia, 2008
Keynote Speaker, 2nd
International Conference on Engineering and Industries, 29 Nov – Dec. 1,
2011-Korea, http://www.humanpub.org/icei/index.html
Many Seminar Speaker
Conference Co-Organizer
Postgraduate and undergraduate Supervision
Supervising 13 Masters Students (completed)
Co-Supervisor for 3 PhD Students
Many final year Projects and Capstone Projects
Supervision for Postgraduate Students (Master degree):
The following names and titles of thesis for Master students:
1. Chong Wen Pein (Master) – completed
Title: Buckling response of composite laminated plates subjected to compressive loading in
transportation systems.
2. Haidar Fadhil A. (Master) - completed
Title: investigation of crushing behavior of materials subjected to axial and lateral loading.
3. Atheer Z. Abdul Razak (Master) – completed
Title: Design and fabrication of cylindrical and square structure energy absorption systems
4. Salah M. Ali (Master) – completed
Title: Experimental study of composite Material cylinders under internal pressure loading.
5. Karam S. Khalid (Master) – completed
Title: Effect of geometry and crushing behavior on energy capability in automotive applications
using a composite Material.
6. Mohammad Hadi Latif (Master) – completed
Title: Development of Environmentally Friendly foldable Bicycle using Finite Element Method
7. Muhanad Hamed Mosa (Master) – completed
Title: Dynamic response of cylindrical metal materials and composite structures.
8. Dafer A. Shnawah (Master) – completed
Title: The effect of fiber orientation, type of fibers and axial crushing speed of composite
structures on energy absorption devices.
9. Ibraheem Ahmed Haqi (Master) – completed
Title: An experimental investigation of particle filled composite tubes under quasi-static axial
loading.
9
10. Laith Q. Saeed (Master) – completed
Title: Mechanical behavior and failure mechanisms of composite tubes under internal pressure.
11. Mohamed Hamid Elsheikh (Master) – completed
Title: Effect of cut-out on the buckling behavior of composite plate.
12. Mohammed Dhia Shaker (Master) – completed
Title: Three dimensional modeling for metal projectiles, plate and human thorax using finite
element technique.
13. Mukhlled J. Kamel (Master) – completed
Title: Finite Element Simulation of Ballistic Impact on metal and composite plates
Journals Editor Board and Reviewer:
1. Australian Journal of Basic and Applied Sciences, ISSN-1991-8178, Elsevier, ISI
THOMSON REUTERS and SCOPUS
2. International Journal of Engineering and Industries (IJEI), AICIT, Korea (Since 2005),
Registration Number to Korea Government: 505-10-96301
3. Open Access Journals, www.openj-gate.com/.../SearchResults.aspx?...%22Hakim%20S.
4. Program Committee in 2nd
International Conference on Engineering and Industries, 29 Nov –
Dec. 1, 2011-Korea, http://www.humanpub.org/icei/index.html
5. Member in Word Academy of Science and Technology Association
6. Reviewer in many journals for Engineering and technology
Current and Coming Research Proposals
The following projects will be conduct as soon as possible (Future works)
1. Effect of environment and material type on ship design and ship performance
2. Finite Element Analysis of Pressure Vessels in marine systems
3. Numerical analysis and simulation to Marine Systems
4. Catastrophic failure analysis in marine accidents
5. Experimental investigations of renewable natural materials extracted from the date palm tree.
6. Effect of Velocity and Ballistic Impact on Penetration Process (Experimental & simulation
process)
7. Effect of crushing speed rate on crushing behavior in collision process in transportation
materials
8. An approach to follow the travel of projectiles penetrating or perforating a plate shielding a
human thorax
9. Modeling in Three Dimensions for Metal Projectiles
10. Shape and size optimization of advance materials devices in crashworthiness applications
11. Stress- Strain Performance of advance material subjected into internal pressure
10
Memberships and affiliations:
Member in Automotive Group (Design), Consulting at Proton Company for Automotive,
Malaysia
Member in the Center of Nanotechnology and Advance Materials (CNAM), Malaysia
Member in the Center of Transportation for Research (CTR), University of Malaya, Malaysia
Member in Accreditation and Quality Assurance
Member in International Association of Engineers (IAENG), Membership Number: 64528
Member in Iraqis Engineers Union (IEU)
Member in Word Academy of Science and Technology Association
Reviewer in many journals for Engineering and technology
Languages:
English: (Fluent), Speaking, writing and Reading
Arabic; ((Fluent) Speaking, writing and Reading
Malay: (Moderate) Speaking, writing and Reading
Hobbies and interests:
Reading, Research, Computer, Football and Swimming
Courses And Special Training Attended:
11
1996 Microsoft office Applications
1996 CNC Machines programming
2000 FORTRAN programming
2002 AUTO CAD Applications
2003 ANSYS/LS-DYNA 3D Modeling and Design Software
2004 Teaching method workshop
2005 Certificate in Occupation safety and health workshop
2006 Certificate in MATLAB software (IEEE)
2006 Finite Element Method, Workshop
2007 Outcomes Based Education Workshop (OBE) organized by the
Faculty of Engineering, UM
2008 LUSAS 3D Modeling Software (Design)
2008 Workshop in Research Technology
2009 Crash, safety and design for Automotive and Aircraft
2009 Workshop, How to Write and Publish An ISI Journals
2010 Certificate in Educational Quality Assurance and Accreditation
2010 Leadership Skills for Managers
2011 Certificate in nanotechnology and its applications
2013 ANSYS Design and modeling software
2014 Certificate in Labview Software
2014 Certificate in MASTER CAM Software (Manufacturing)
12
Research Projects Funded (Project Leader)
During my working at the universities, I have got the following projects research funded:
No. Project Amount Source
1
Design and Implementation of a new Low-
Cost Hybrid Solar Drying System 1800 OR
FURAP (for undergraduate student) –
The research council TRC, Oman, 2016
(Accepted for next year)
2 Design and development solar thermal system
1950 OR FURAP (for undergraduate student) –
The research council TRC, Oman, 2016
3 Thermo Elastic Analysis of Smart Pipes or
Condition Monitoring Using FEA 100,000
Ministry of Science, Technology and
Innovation (MOSTI), Malaysia
4
Experimental And Finite Element Analysis Of
Composite Structures For Automotive and
aerospace applications
43,920 Ministry of Higher Education (MOHE),
Malaysia
5
Buckling And Post-Buckling Response Of
Composite Laminated Plates Subjected To
Compressive Forces
27,750
Ministry of Higher Education (MOHE),
Malaysia
6
An Approach To Increase The Absorption of
A Composite Tubes Subjected To Axial And
Lateral Loading
50,000 University Malaya, Malaysia
7 Experimental Study of Composites for Energy
Absorption Systems 10,000 University Malaya, Malaysia