Post on 22-Apr-2018
1
CURRICULUM VITAE
PERSONAL DETAIL
Name :
SHUKUR BIN ABU HASSAN
Nationality : Malaysian
Place of Birth Penang, Malaysia
Maritial Status : Married
Telephone : Mobile: 019 -7626585
Office : 07 -5535989
Fax: 07-5566159
Email : shukur@utm.my
Website : http://mech.utm.my/shukur
Expertise : Composites Structure Durability, Recycling Composites, Biomimetics Design,
Composites Testing, Natural Fibre Composites, Hybrid Composites, Composites
Bonding, Polymer Mortar Composites
ACADEMIC QUALIFICATION
2007 : PhD Mechanical Engineering (Composites Structure)
Universiti Teknologi Malaysia
1992 : M.Sc.
Manufacturing Systems Engineering
University of Warwick, Coventry, United Kingdom
1988 : Bachelor of Mechanical Engineering
Universiti Teknologi Malaysia
AWARD/APPRECIATION RECEIVED
1 Appreciation from the Dean of Faculty Mechanical Engineering for conducting the Composites
materials and structure course in 1992
2 Appreciation from the Pahang Education Department for conducting the Composites materials
processing methods course in 1994
3 Appreciation from the Dean of Faculty Mechanical Engineering for conducting the Composites
materials and structure course in 1995
4 Appreciation from SIRIM, Malaysia for Committee member in preparing MS 1390:1995
5 Appreciation from the Dean of Faculty Mechanical Engineering for conducting the Composites
materials and structure course in 1996
2
6 Vice Chancellor Publishing Honorary – Paperworks Category in 2002
7 University Publishing Honorary 2003 for Originality Book (Malay Version)
8 UTM Vice Chancellor Honorary for Sport Car project development – ARG10 UTM
9 UTM Vice Chancellor Honorary for Solar Car project development - SURIA KAR 2020
10 Appreciation from MBT (Malaysia) in 2001 for providing technical support on CFRP project
11 UTM Vice Chancellor Honorary for Solar Bike Rayces USA 2002 and Solar Express USA 2002,
Kansas, USA
12 Appreciation from The Malaysia Book of Records in 2003 for the first development of racing car
“FORMULA-M” in Malaysia
13 Appreciation from UMP for Conducting Fibre Reinforced Polymer Composite for Infrastructure
Application Part II course - CENFED UMP-CFC UTM, 2007
14 Appreciation from Politeknik Ibrahim Sultan, Pasir Gudang, Johor on International Invention and
Innovation Exhibition ITEX 2015, Kuala Lumpur Convention Centre
15 Appreciation from UiTM Pasir Gudang on Supporting Industrial Training Student in CfC UTM,
2016
16 Appreciation from the Dean of FKM on MECAF16, UTM
17 Gold Medal for innovation/invention of Analysis on Mechanical Properties of Structural Epoxy
Sikadur 330 Filled with Recycled Milled Carbon Fibres Composites, iCompEx’17, Sultan Abdul
Halim Mu’adzam Shah Polytechnic
18 Bronze Medal for the invention of Analysis on Mechanical Properties of Structural Epoxy Sikadur
330 Filled with Recycled Milled Carbon Fibres Composites, Innovative Research, Invention and
Application EXPO 2017 (I-RIA 2017), UUM
PROFESSIONAL MEMBERSHIP
Member of Board of Engineers, Malaysia (18629A) since 1991
ADMINISTRATIVE EXPERIENCE
1996 - 1998 Coordinator (Centre Head) for UTM Centre for Composites (PUSKOM)
1998 - 2000 Deputy Director for UTM Centre for Composites
2006 Acting Director for UTM Centre for Composites
Dec. 2006 - Oct. 2007 Director for UTM Centre for Composites (CfC)
Oct. 2012 to date Head of Centre for Composites Consultancy and Services Unit
2013 to date Head of Composites Laboratory FKM
*Note:
2001-2005
2008-2012
Study Leave
Unpaid Leave (Accompanied wife to further study in United Kingdom)
3
SEMINAR/COURSE ATTENDED
1. Seminar on Polymer Composites Materials, UTM, 1992
2. Workshop on Reinforced Plastics: Materials and Manufacture, SIRIM, 1993
3. Filament Winding Training Course (Polymer Composites), Boeing (formerly known as McDonnell
Douglas Aerospace before merger with Boeing), St. Louis, Missouri, USA, 1996 (7 weeks)
4. Training on RTM Process (Polymer Composites), University of Warwick, Coventry, UK, 1997 (3
months)
5. Short Course on Specimen Preparation and Metallagraphy, UTM 2000
6. Five Disciplines of Innovation Workshop, Business Terms Workshop, 2‐4 October 2013, Renaissance
Johor Bahru Hotel
7. Short Course on Introduction to ANSYS LS DYNA, Centre for Composites UTM, 2014
PROFESSIONAL SERVICE
National Committee
1. Malaysian Standard Preparation Committee: Specification for Glass-Reinforced Polyester Panels Water
Tanks (MS1390:1995), SIRIM Malaysia, 1994
2. Advisory Committee for setting up Composites Course for GIATMARA Pekan Nenas, Johor, 1997
3. Technical Panel for Malaysian-France Institute (MFI), 1997
4. Advisory panel for German-Malaysian Institute (GMI) - Composite Division, 2006
5. Panel for Advisory Committee – KKTM Alor Gajah on (Diploma in Polymer Composites Processing),
9th August 2006
6. 2nd Advisory Committee KKTM Alor Gajah on (Diploma in Polymer Composites Processing), 8
December 2006
7. 3rd Advisory Committee – Kolej Kemahiran Tinggi Mara Alor Gajah, 2007
8. Course Coordinator/Presenter for Fibre Reinforced Polymer Composites for Infrastructure Application
Part II, CENFED UMP-CfC, 2007
9. Course Coordinator/Presenter for Fibre Reinforced Polymer Composites for Marine Application,
Marine Technology Centre-CfC UTM, 2007
10. Presenter for DOSH Steam and Internal Combustion Engine Questions Developer Team, Johor Bahru,
July, 2017.
University Committee
1. Technical Advisor to Majlis Perwakilan Pelajar (MPP) UTM for Composites Workshop in Penang,
1995
2. Committee member for Science and Technology Week, 1993
3. Committee member for Warwick Course Programme, 1993
4. Committee member for Malaysian Automotive industry Towards 2020 Seminar, 1994
4
5. Member in Technical Specification and Tender Document Preparation for Filament Winding Machine
(PUSKOM/RMK7), 1999-2000
6. Member of FKM Seminar Committee, 2000
7. Organizing Committee for National Seminar on Advanced Materials in Malaysia, Johor, 2001
8. Project head for the Construction of Filament Winding Machine (BIP), 2003
9. Member in Tender Document Preparation for Impact Machine/Compression Moulding/Laser Doppler
System (PUSKOM/IDB), 2003-2004
10. Committee member for Asset Facility FKM, 2013-2015
11. Main Committee for 5S FKM, 2013-2015
12. Committee member for Faculty Promotion (FKM), 2013-2015
13. Ballistics Machine technical specification and tender document preparation for UTM Composites
Centre, 2015
14. Project Team Member, Development of Advance Disaster Relief Utility Vehicle (ADRUV) Project,
2015-2016.
Technical Consultant
1. Technical Consultant for BLT Fibreglass Sdn. Bhd., 15 July 1996 to 31 Disember 1998
2. Project Manager for the construction of 3 units GFRP water storage tanks in Pulau Sibu Resort (BIP),
1999
3. Technical Adviser for Atostech Fibreglass Sdn. Bhd., January 2017
Journal Editor/ Reviewer
1. Encyclopedia evaluator: Sains dan Teknologi Bagi Kata Masukan Bahan Rencam (25 April 1992)
2. Encyclopedia evaluator: Sains dan Teknologi Bagi Kata Masukan Pegas (12 August 1995)
3. Encyclopedia evaluator: Science and Technology for Composites UTM, 1997
4. Reviewer, Jurnal Mekanikal: Effect of Micro-Bubbles Elimination Before Vacuum Infusion Process,
2007
5. Reviewer, Journal of Construction and Building Materials, 2014
6. Reviewer, Jurnal Mekanikal: Preliminary Study for Natural Fibre Reinforced Composites Usage in
Sebelas Maret University Electric Vehicle Interior using Comparative Analysis, 2017
7. Editor of Book Chapters, UTM Press, 2014
5
RESEARCH ACTIVITY
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Polymer Composites (GFRP) Sports Car Body Panel (Vot: 61727) 1995
1996
Project Leader
RMC UTM
50,000
Sports Car Prototype
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Solar Race Vehicle 1995
2001 (Completed)
Project Team Member
RMC UTM (Flagship)
300,000
Solar vehicle to race in the World Solar Challenge, Australia 1996
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Engineering Design Data of Advanced Polymer Composites (Vot: 71219)
1997
1999 (Completed)
Project Leader
RMC UTM
20,000
Composites Database for Development of Solar Race Car and FORMULA-M Body
Construction
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Composites Bicycle Design (Vot: 71368)
1988
1999
Team Member
RMC UTM
20,000
Design and Prototype (Mock-up Model)
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Development of Innovative Use of Fibre Reinforced Plastic in Construction
Industry (Vot: 72134) 1999
2000 (Completed)
Project Team Member
IRPA (Science Fund)
659,300
Pultrusion machine design/Database for Pultruded FRP Composites and Publication of
papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Development of Torpedo Prototype (Vot: 71220) 1998
1999 (Completed)
Project Team Member
RMC UTM
30,000
Torpedo prototype/Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Behaviour of Beams Strengthened with CFRP Composites (Vot: 72272)
1999
2001 (Completed)
Project Team Member
IRPA (Science Fund)
94,240
MSc students/Publication of papers
6
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Solar Vehicle (2nd Generation)
1999
2003 (Completed)
Project Team Member
IRPA (Science Fund)
1,000,000
World Solar Car Championship, Australia 2001
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Design and Optimisation of Solar Photovoltaic System for Semi-Recumbent
Aerodynamic Solar Powered Cycle (Vot: 72344)
2000
2002 (Completed)
Project Team Member
IRPA (Science Fund)
131,100
World Solar Race Australia 2001/Solar Bike Race, USA 2002
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Performance of GFRP Plates as Srengthening Material for Reinforced Concrete Beams (Vot: 71688)
2000
2001 (Completed)
Project Team Member
IRPA (Science Fund)
100,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
The Study of Bonding Behaviour Between Fibre Reinforced Polymer Composite
Plate and Concrete Prism Under Tropical Climate (Vot: 71688)
2002
2003 (Completed)
Project Team Member
RMC UTM
30,000
Publication of papers/PhD Thesis
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Long-term Performance of Eternally Bonded Fibre Reinforced Polymer
Composites (FRP) as Strengthening Material for Reinforced Concrete Beam
(Vot: 74180) 2003
2006 (Completed)
Project Team Member
IRPA (Science Fund)
179,000
Publication of papers/MSc and PhD Thesis
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
The Study of Composites Based Honeycomb Structure for Road Vehicle (Vot:
75072) 2004
2004 (Completed)
Project Team Member
RMC UTM
20,000
Database for CFRP Composites Road Vehicle and Publication paper
Title
From
To
Position held Funding Institution
Grant Amount (RM)
Major output
GFRP Composite Footbridge – UTM Experience (Vot: 73045)
2004
2004 (Completed)
Project Team Member (PUSKOM/UTM special project) RMC UTM
70,000
GFRP Bridge Prototype UTM and Publication paper
7
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Design, Fabrication and Commercialization of Trash Trap Made of GFRP –
Phase 1
2005
2006
Project Team Member
RMC UTM
50,000
Publication of paper/Prototype 1st Generation
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Database for Fibre Reinforced Polymer Products and Application in Malaysia
2005
2006
Project Team Member
CIDB
70,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Investigation of the Hydraulic Characteristics for Potable Rubbish and Sediment
Trap (FRP Cage Design) (Vot: 78105)
2007
2008
Project Team Member
RMC UTM
40,000
GFRP Trash Trap Design and Prototypes of 2nd/3rd Generation/Ready for
Comercialisation (ICC/Atostech Fibreglass Sdn. Bhd.)
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Fundamental Bonding Characteristics of Thermoplastic Resin as Adhesive for
the CFRP-Concrete Strengthening System (Vot: 78023)
2007
2008
Project Team Member
RMC UTM
50,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Mechanical Properties of Hybrid Glass Fibre Recyclate/ Montmorillonite
Nanofiller Reinforced Polymer Composites (Vot: 09J63)
2014
2015
Project Leader
RMC UTM (Tier 2)
30,804
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Natural Fibre Reinforced Epoxy Composites Poles for Marine Yacht Structure
2014
2015
Project Team Member
RMC UTM (Tier 1)
41,606
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Structural and Durability Performance of Steel/CFRP Bonding System under
Tropical Climate (Vot: 07H32) 2014
2016
Project Team Member
RMC UTM (Tier 1)
40,000
Publication of papers/PhD Student
8
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Sustainable Hydrokinetic Renewable Energy (SHRE) - Hydrokinetic Turbine
Energy Transmisson System (HTETS) (Vot: 4B163)
2014
2016
Project Leader
JKR Research Malaysia/KETHHA
225,000
Prototype (on-going) and Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Development of Advanced Disaster Relief Utility Vehicle
2015
2016
Project Team Member
RMC UTM (Flagship)
450,000
ADRUV Prototype/Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Sustainable Biomimetics Design of Polymer Composite Rotor Shaft for
Hydrokinetic Application (Vot: 10H22)
2015
2016
Project Leader
RMC UTM (Tier 1)
48,750
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Development of Lightweight Bullet-Proof Panel using Hybrid Composites 2015
2016
Project Team Member
RMC UTM (Tier 1)
50,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Self-Contoured Composites Laminates Design using Polar Method
2016
2018
Project Team Member
RMC UTM (Tier 1)
50,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Design and Development of Fire Retardant High Strength Sandwich Structure
for Building Construction (Vot: 4S136) 2016
2018
Project Team Member
Science Fund
143,000
Publication of papers
Title
From
To
Position held
Funding Institution
Grant Amount (RM) Major output
Experimental and Analytical Bending Behaviour of Sandwich Composites Beam
with Polyurethane Foam filled Kenaf/FRP Recyclates Core (Vot: 17H91) 2017
2018
Project Leader
RMC UTM (Tier 1)
35,500 (on-going)
9
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Mechanical Performance of Polyurethane Foam Filled with Kenaf/GFRP
Recyclates For Composites Sandwich Core (Vot: 13J89)
2017
2018
Project Team Member
RMC UTM (Tier 2)
20,000
(on-going)
Title
From
To
Position held
Funding Institution
Grant Amount (RM)
Major output
Impact Characteristics of Natural Fibre Woven Fabrics Impregnated with A
Shear Thickening Fluid (Vot: 17H35)
2017
2019
Project Team Member
RMC UTM (Tier 1)
40,000
(on-going)
INTELLECTUAL PROPERTY
1. Trash Trap
No. ID: 15-00945-0101
2. Butterfly Mould for Epoxy Mixture
No. ID: 15-009
3. End Tab Band Rig
No. ID: 15-00944-0101
4. Concrete-Carbon Bond Rig
No. ID: 15-00941-0101
5. Improved Arcan Test Rig
No. ID: 15-00942-0101
6. Load Sustained Rig
No. ID: 15-00940-0101
CONSULTATION
1. Projek Rekabentuk dan Pemantauan Pembinaan tiga (3) Unit Tangki Air GFRP Berkapasiti 40,000
Gelen, Pulau Sibu Tengah, Mersing, Johor, 1998 to 1999. (Project Leader)
2. Projek Rekabentuk Mesin Filament Winding untuk Atostech Fibreglass Sdn. Bhd., 2003. (Project
Leader)
3. Projek Penguatan Semula Tangki Air GFRP untuk Atostech Fibreglass Sdn. Bhd., 2003. (Project
Leader)
4. Projek Pembuatan Tangki Petroleum GFRP (Vot 63650), 2004. (Project Leader)
5. Projek Susunatur dan Pemilihan Peralatan Kilang Baja Organik (Baja Peladang Teknologi EM – Vot
63600), 2006. (Project Leader)
6. Projek Rekabentuk Terperinci Rancangan Tebatan Banjir Bukit Tambun, Daerah Seberang Perai
Selatan, Pulau Pinang, Jun 2007.
10
7. Flexural Load Test for GFRP-Steel Bench, JONCAN Sdn. Bhd. 2013 (Project Leader)
8. GFRP Grating Load Test for IPSB 2014 (Project Leader)
9. Cement Block Machine Rotating Arm for Universal Engineering Sdn. Bhd. 2015 (Project Leader)
10. Hydrokinetic Project for Sarawak with JKR Research, 2015 to 2017. (Project Leader and Project Team
Member)
11. FRP Wrapping for Oil and Gas Pipes for IOSV Sdn. Bhd., 2015 to date. (Project Member)
12. Innovative Concrete Brick FE Analysis for Universal Engineering Sdn. Bhd. 2017 (Project Leader)
TEACHING ACTIVITY
Session
Semester
Course Code
Course
Credit Hour
2005/2006 2 SME 1213 Dynamics 3
2006/2007 1 SME 1203 Statics 3
2006/2007 1 SME 2113 Solid Mechanics I 3
2006/2007 2 SME 1213 Dynamics 3
2006/2007 2 SMU 2102 Solid Mechanics I 3
2007/2008 1 SME 1203 Statics 3
2007/2008 1 SME 2113 Solid Mechanics I 3
2012/2013 2 SKMM 1113 Solid Mechanics I 3
2013/2014 1 SKMU 2113 Engineering Science 6
2013/2014 2 SKMM 1113 Solid Mechanics I 3
2014/2015 1 SKMM 1203 Statics 3
2014/2015 2 SKMM 1113 Solid Mechanics I 3
2015/2016 1 SKMM 1203 Statics 3
2015/2016 2 SKMM 1113 Solid Mechanics I 6
2015/2016 2 SKMM 3491 Mechanics Laboratory III 1
2016/2017 1 SKMM 2123 Solid Mechanics II 3
2016/2017 2 SKMU 2113 Engineering Science 3
2016/2017 2 SKMM 1203 Statics 3
Total Credit 58
*Note: Teaching activities prior to 2005/2006 session can be made available upon request.
11
SUPERVISION
Supervision: Main Supervisor
Student Name Programme
Year
Start Research Project Name Status
Umar bin Abdul Hanan
(PM123099)
PhD 2012 Mechanical Properties of Hybrid Glass Fibre
Recyclate/ Montmorillonite Nanofiller
Reinforced Polymer Composites.
Active
Chong Lip Gang
(MM133008)
MSc 2014 Improved Design of Bullet Proof Shield Based
on Biomimetics.
Completed
Siti Khalijah Jamal
(PKM143027)
PhD 2014 Interlaminar Study of Hybrid Woven
Kenaf/Recyclate GFRP Composites
Active
Nor Ashiqeen Jamaluddin
(PKM153014)
PhD 2015 Shear Adhesion Properties of Glass Fibre /
Epoxy Bonded to Steel under Temperature
Variation
Active
Mohd Norazizul Fadli
Abu Bakar
(PKM153016)
PhD 2015 Biomimetic Approach in Designing a
Composites Harvesting Pole for Oil Palm
Plantation
Active
Muhamad Faidzal Bin
Mohd Yusuff
(MKM153029)
MSc 2015 Compressive Properties of Tin Slag Polyester
Composites
Active
Mohamad Airul Amin
bin Md Dani
(MKM163005)
MSc 2016 Analytical and Numerical Analysis on Shear
Adhesion Properties of Glass Fibre /Epoxy
Bonded to Steel under Temperature Variation
Active
Supervision: Co-Supervisor
Student Name Programme
Year
Start Research Project Name Status
Hasnul Hadi Hashim
(FKA)
MSc 1997 The Development of a Prototype Carbon Fibre
Reinforced Plastic (CFRP) Rebar/Strand by
using Hand Lay-Up Moulding Technique for its
Mechanical Properties Study
Completed
with
Advanced
Diploma
Mohd. Halim Irwan
Ibrahim
MSc 2003 The Effect of Buckling in FRP Members Completed
Peter Ling Chuan Chang
(FKA)
MSc 2005 Bonding Behaviour between CFRP and Steel
Plates to Concrete Prisms
Completed
Iqbal Mokhtar PhD 2011 Compressive Behavior of Basalt Filament
Wound Composite Tubes Subjected to
Transverse Impact Loading
Completed
2016
Nor Izzah Mokhtar
(FKA)
(PA113068)
PhD 2011 Shear Strengthening of Tropical Timber Beam
Using FRP
Active
Mohamad Yusuf bin
Salim
(PKM153038)
PhD 2015 Anti-stab Performance of Basalt Fabric
Impregnated with Shear Thickening Fluid
Active
12
Thesis Evaluation
1. Internal Examiner for MSc (FCEE), 1998. Kajian Kesan Geometri ke atas Keberkesanan Baik Pulih
Panel Komposit Poliester Bertetulang Gentian Kaca.
2. External Examiner for MSc (FKM, UiTM), 2015. Thermo-Mechanical Analysis of Nanomaterials
Reinforced Epoxy Nanocomposites.
PUBLICATION
Journal indexed in Thomson Reuters
1. Hassan, S. A., Gholami, M., Ismail, Y. S., & Sam, A. R. M. (2015), “Characteristics of concrete/CFRP
bonding system under natural tropical climate.” Construction and Building Materials, 77, 297-306.
(IF=2.265).
2. Ayatollahi, M. R., Yahya, M. Y., Shirazi, H. A., & Hassan, S. A. (2015), “Mechanical and tribological
properties of hydroxyapatite nanoparticles extracted from natural bovine bone and the bone cement
developed by nano-sized bovine hydroxyapatite filler.” Ceramics International, 41(9), 10818-10827.
(IF=2.086).
3. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Balqis Omar, Rohana Yusof and Siti
Khalijah Jamal (2017), “Mechanical properties of recycled glass fibre reinforced nanoclay/unsaturated
polyester composites.” International Journal of Advanced and Applied Sciences, 4(3): 1-6.
4. S. K. Jamal, S. A. Hassan, K. J. Wong and M. Y. Yahya (2017), “Flexural and interlaminar shear study
of hybrid woven kenaf/recycled GFRP (rGFRP) composites subjected to bending load.” International
Journal of Advanced and Applied Sciences, 4(3): 45-50.
5. Siti Khalijah Jamal, Shukur Abu Hassan, Wong King Jye, Umar Abdul Hanan, Mohd Nazrul Roslan
(2017), “The influence of woven density on tensile properties of hybrid kenaf/glass composites.”
Journal of Applied Environmental and Biological Sciences, 7(7):160-166.
6. Iqbal Mokhtar, Mohd Yazid Yahya, Shukur Abu Hassan, and Carlo Santulli (2017), “Transverse
impact response of filament wound basalt composite tubes.” Composites Part B: Engineering 128 (1).
pp. 134-145. (IF=4.727).
Journal indexed in Scopus
1. Iqbal Mokhtar, Mohd Yazid Yahya, Ab Saman Abd Kader and Shukur Abu Hassan (2014),
“Experimental Analysis of Kenaf Filament Wound Tubes under Axial Compression Load.” Applied
Mechanics and Materials Vol. 660 pp. 778-782.
2. B. Abdi, S. A. Hassan, M. U. Wahit and U. A. Hanan (2014), “Tensile and Flexural Properties of
Recycled Glass Fibre Reinforced Polyester Composites.” Materials Research Innovations Vol. 18 Suppl.
6 pp. S6-1-S6-3.
3. S. Abu Hassan, Y. S. Ismail, A. R. Mohd. Sam, U. A. Hanan & M. U. Wahit (2015), “Shear Property
of Structural Epoxy Adhesive Exposed to Tropical Weathering Condition.” Jurnal Teknologi, 77(8). 83-
90.
13
Non Thomson Reuters/Non Scopus Journal
1. Idris Ishak and Shukur Abu Hassan (1997), “Pembangunan Konsep Reka Bentuk Protatip Kereta
Formula-M.” Jurnal Mekanikal, Jilid I. pp. 17-35.
2. Idris Ishak and Shukur Abu Hassan (1997), “Pembuatan Panel Badan Kereta Lumba Formula-M
Daripada Bahan Polimer Komposit (GFRP).” Jurnal Mekanikal, Jilid II. pp. 52-63.
3. S. Abu Hassan, A. R. Mohd. Sam and Y. S. Ismail (2009), “Bond Behaviour of CRFP Plate Bonded of
Concrete under Tropical Climate”, FKM Journal.
4. S. Abu Hassan, A. R. Mohd. Sam and Y. S. Ismail (2009), “Mechanical Test Rig Design for CRFP
Plate Bonded of Concrete under Tropical Climate”, FKM Journal.
5. Iqbal Mokhtar, Mohd Yazid Yahya, Ab Saman Abd Kader and Shukur Abu Hassan (2015), “Energy
Absorption of Basalt Filament Wound Rectangular Tubes: Experimental Study.” In Applied Mechanics
and Materials Vol. 711, pp. 201-205.
6. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Ahmad Raizal Md Rozali, Hj. Kamarul
Bahrin Mohamad and Mohd Arif Mat Lazi (2016), “Mechanical properties of glass fibre waste/kenaf
core reinforced unsaturated polyester eco-friendly composites.” Journal of Built Environment,
Technology and Engineering, 1, 273-281.
7. Nor Izzah Mokhtar, Shukur Abu Hassan, Yusof Ahmad, Nor Ashiqeen Jamaluddin and Balqis Omar
(2016), “Finite element modeling of arcan testing method for ductile and brittle material under different
loading configuration.” Journal of Built Environment, Technology and Engineering, 1, 289-298.
8. S. K. Jamal, S. A. Hassan, K. J. Wong and U. A. Hanan (2016), “Mechanical properties of hybr id
woven kenaf/recycled glass fibre reinforced polyester composites.” Journal of Built Environment,
Technology and Engineering, 1, 335-344.
9. Nor Izzah Mokhtar, Shukur Abu Hassan, Abdul Rahman Mohd. Sam, Yusof Ahmad & Balqis Omar
(2017), “Bond performances between CFRP plate and steel plate to concrete prism using structural
adhesives.” Malaysian Journal of Civil Engineering 29 Special Issue (1):37-55.
Conference Papers
1. S. Abu Hassan (1999), “Strain Analysis of a Saddle Mounted GRP Pipe,” World Engineering
Congress, Malaysia.
2. S. Abu Hassan (2000), “Resistance Predictions of an Underwater Vehicle.” International Conference
on Advances in Strategic Technologies, Malaysia.
3. S. Abu Hassan and S. H. Tapsir (2000), “Carbon Fiber Reinforced Polymer (CFRP) System for
External Strengthening of Concrete Bridge Girder.” Fourth Malaysian Road Conference.
4. S. H. Tapsir, A. R. Mohd. Sam, J. Mohamad Yatim, S. Abu Hassan and Y. L. Lee (2001), “Flexural
Properties of Reinforced Concrete Beams Strengthened with Unidirectional CFRP Laminate System.”
National Seminar on Advanced Materials Development in Malaysia, Malaysia, 15th – 16th May 2001.
5. S. H. Tapsir, A. R. Mohd. Sam, J. Mohamad Yatim, S. Abu Hassan and C. C. Kee (2001), “Shear
Properties of Reinforced Concrete Beams Strengthened with Carbon Fibre Reinforced Polymer
(CFRP).” National Seminar on Advanced Materials Development in Malaysia, Malaysia, 15th – 16th
May 2001.
14
6. M. Y. Abdullah, S. Abu Hassan and C. K. Chan (2001), “Experimental Testing Vibration Properties of
FRP Composite Plates Validates by Finite Element Analysis.” National Seminar on Advanced Materials
Development in Malaysia, Malaysia, 15th – 16th May 2001.
7. A. R. Mohd. Sam, S. Abu Hassan and Y. Saed Ismail (2002), “Tensile Behaviour of CFRP and GFRP
Reinforcements.” Research Seminar on Materials and Construction, October 29th – 30th 2002, UTM,
Malaysia.
8. A. R. Mohd. Sam, S. Abu Hassan and I. Johan Azmi (2002), “Performance of GFRP Plate as
Strengthening Material for Reinforcement Concrete Beams.” Research Seminar on Materials and
Construction, Oct 29th – 30th 2002, UTM, Malaysia.
9. A. R. Mohd. Sam, S. Abu Hassan and K. Wee Seng (2002), “Performance of Concrete Column
Strengthened with CFRP Sheet.” Research Seminar on Materials and Construction, October 29th – 30th
2002, UTM, Malaysia.
10. A. R. Mohd. Sam, S. Abu Hassan and C. Hoe Cheong (2002), “The Flexural Behaviour of Reinforced
Concrete Beams Strengthened with CFRP Plates.” Research Seminar on Materials and Construction,
October 29th – 30th 2002, UTM, Malaysia.
11. S. Abu Hassan (2003), “Rehabilition of Reinforced Concrete Structures Using FRP Plate-Bonding
System.” National Symposium on Science and Technology, July 28th – 30th 2003.
12. A. R. Mohd. Sam and S. Abu Hassan (2003), “Behaviour of Reinforced Concrete Beam Strengthened
with Fibre Reinforced Polymer Plate.” Asia Pacific Structural Engineering and Construction
Conference, August 26th – 27th 2003.
13. A. R. Mohd. Sam, Y. S. Ismail and S. Abu Hassan (2003), “Bond Behaviour of CRFP Plate Bonded of
Concrete.” Malaysia Science and Technology Congress, September 23rd – 25th 2003.
14. A. R. Mohd. Sam and S. Abu Hassan (2004), “Fully Bonded GFRP Composite Footbridge – UTM
Experience.” International Conference on Bridge Engineering and Hydraulic Structures, Universiti Putra
Malaysia, Malaysia, 26th – 28th July 2004.
15. A. R. Mohd. Sam and S. Abu Hassan (2005), “Fibre reinforced polymer composites in construction.”
National Civil Engineering Conference (NACEC2005), 19th – 20th December 2005, KUITTHO, Johor.
16. A. R. Mohd. Sam and S. Abu Hassan (2005), “Flexural behaviour of reinforced concrete beams
strengthened with CFRP Plates.” National Civil Engineering Conference (NACEC2005), 19th – 20th
December 2005, KUITTHO, Johor.
17. Y. S. Ismail and S. Abu Hassan (2006), “The effect of buckling towards the strength of FRP Pultruded
Column.” National Seminar on Science and its applications in industry, February 14th – 15th 2006,
Century Mahkota Hotel, Melaka.
18. A. R. Mohd. Sam and S. Abu Hassan (2006), “Performance of doubly-reinforced concrete beams
strengthened with CFRP plate.” Malaysian Science and Technology Congress, September 2006.
19. Ainullotfi Abdul-Latif, Mohd Zulmatfi Zainuddin and Shukur Abu Hassan (2006), “Finite Element
Analysis and Experimental Tests on UTM Composite Bridge.” 6th Regional Conference on
Computational Mechanics & Numerical Analysis (CMNA 2006), 12th – 13th May 2006, Syiah Kuala
University, Banda Aceh, Indonesia.
20. Mohd Ruzaimi Mat Rejab, Hasnulfikri Mahbot and Shukur Abu Hassan (2006), “Failure Investigation
of GFRP Water Storage Tank: A Case Study at IKBN Jitra, Kedah.” Proceedings of National Seminar
on Science, Technology & Social Sciences 2006 (STSS), Kuantan, 30th – 31st May 2006.
15
21. Norhan Abd. Rahman, Shukur Abu Hassan, Ngien Su Kong and Siti Rabe’ah (2007), “Rubbish Traps
in Open Channel Flow.” National Seminar in Civil Engineering Research, UTM, Johor Bahru,
Malaysia, December 2007.
22. Norhan Abd Rahman and Shukur Abu Hassan (2007), “Study of effectiveness for rubbish traps in
open channel flow.” National Seminar on Civil Engineering Research (SEPKA 2007), Good Hope
Hotel, Skudai.
23. M. H. Mohd Hashim, A. R. Mohd Sam, M.W. Husin & S. Abu Hassan (2007), “Performance of
Externally Bonded Reinforced Concrete Structures using Carbon Fiber Reinforced Polymer in Tropical
Climate.” Conference on Sustainable Building South East Asia, 5-7 November 2007, Malaysia.
24. Norhan Abd. Rahman, Shukur Abu Hassan, Noraliani Alias, SitiRabe’ah Othman, Noor Suraya
Romali and Muhammad Fuad Shukor (2008), “Application of GFRP Rubbish Trap in Open Channel
System.” 6th Seminar on Water Management (JSPS-VCC), July 2008 (Sabah).
25. Omar B., Abu Hassan, S. and Ballal T. (2009), “Exploring Context-Awareness in the Construction
Logistics Services Delivery.” In: Managing IT in Construction/Managing Construction for Tomorrow,
CIB W078, 26th International Conference, Istanbul Technical University, Istanbul, Turkey, October
2009, pp. 439-448.
26. S. Abu Hassan, A. R. Mohd. Sam and Y.S. Ismail (2012), “CRFP Plate Properties under Tropical
Climate.” JEC Composites Conference, Singapore.
27. Abdi, B., Abu Hassan, S., Wahit, M. U. and Umar, A. H. (2013), “Tensile and quasi-static flexural
properties of recycled glass fibre reinforced polyester composites.” 1st International Conference on
Science & Engineering of Materials 2013 (ICoSEM2013), November 2013, Kuala Lumpur, Malaysia.
28. Abdul Rahman Mohd. Sam, Shukur Abu Hassan, Mohd Hisbany Mohd Hashim, Mohd Yunus Ishak
and Jamaludin Mohamad Yatim (2014), “Performance of Carbon Fibre Reinforced Polymer-Concrete
Bonding System in Tropical Climate.” In: International Conference of Engineering, Information
Technology, and Science (ICEITS2014). 4th – 5th December 2014. IOI Hotel & Golf Resort, Bandar
Sunway, Malaysia.
29. Chong Lip Gang, Shukur Abu Hassan & Mohd Yazid Yahya (2015), “The Potential of Biomimetics
Design in the Development of Impact Resistant Material.” In: 1st ICRIL-International Conference on
Innovation in Science and Technology (IICIST 2015), Kuala Lumpur.
30. Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim & Shukur Abu Hassan
(2015), “Performance of Carbon Fibre Reinforced Polymer Plate Bonding System under Various
Environmental Conditions.” In: 9th Asia Pacific Structural Engineering and Construction Conference
and 8th ASEAN Civil Engineering Conference, Kuala Lumpur.
31. Nor Izzah Mokhtar, Yusof Ahmad & Shukur Abu Hassan (2015), “Shear Strengthening of Solid
Timber Beams Using High Strength Fibre Reinforced Epoxy System.” In: 9th Asia Pacific Structural
Engineering & Construction Conference (APSEC 2015) and 8th Asean Civil Engineering Conference
(ACEC 2015). Kuala Lumpur.
32. Nor Izzah Mokhtar, Yusof Ahmad & Shukur Abu Hassan (2015), “Shear Strengthening of Solid
Timber Beams using High Strength Fibre Reinforced Epoxy System.” In: Innovative Practices in
Higher Education Expo (I-PHEX 2015). 6-8 August 2015. UTM Kuala Lumpur.
33. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit & Siti Khalijah Jamal (2016), “Mechanical
Recycling of GFRP Waste as Reinforcement in Unsaturated Polyester Composites.” In: 6th International
Graduate Conference on Engineering, Science and Humanities (IGCESH). Johor Bahru.
16
34. Siti Khalijah Jamal, Shukur Abu Hassan, Wong King Jye, Umar Abdul Hanan & Muhamad Norkhizan
Abdullah (2016), “Tensile Behaviour of Unbalanced Woven Kenaf Reinforced Polyester Composites.”
In: 6th International Graduate Conference on Engineering, Science and Humanities (IGCESH), Johor
Bahru.
35. Hooi Peng Lim, Hairizza Kosnan, Shukur Abu Hassan (2016), “Reco Block: Significance Of
Replacing Rice Husk Ash As Natural Filler In Ecofriendly Retaining Wall Block.” In: 6th International
Graduate Conference on Engineering, Science and Humanities (IGCESH), Johor Bahru.
36. Nor Ashiqeen Jamaluddin, Shukur Abu Hassan, Ab Saman Abd Kader, Balqis Omar and Mohamad
Azim Mohd Adam (2017), “Compressive behaviour of Filament Wound Steel/Carbon Hybrid
Composites Tube.” Mechanical Engineering Research Day (MERD'17), 30th March 2017. UTeM,
Melaka.
Book Chapters
1. Abdul Rahman Mohd. Sam, Shukur Abu Hassan, Zuhairi Abd.Hamid, Roswadi Muhammad (2008),
“Glass Fibre Reinforced Polymer in Malaysian Construction Industry.” In Mohd. Warid Husin, Abdul
Rahman Mohd. Sam, Jamaludin Mohamad Yatim (Ed.), Advanced Advanced Composite Materials:
Properties and Applications (pp. 1-14). Johor Bahru: UTM.
2. Mohd.Yunus Ishak, Abdul Rahman Mohd. Sam and Shukur Abu Hassan (2008), “Shear Behaviour of
Reinforced Concrete Beams Strengthened With Bonded Carbon Fibre Reinforced Polymer Fabric.” In
Mohd. Warid Husin, Abdul Rahman Mohd. Sam, Jamaludin Mohamad Yatim (Ed.), Advanced
Composite Materials: Properties and Applications (pp. 58-72). Johor Bahru: UTM.
3. Mohd. Hisbany Mohd. Hashim, Abdul Rahman Mohd. Sam, Mohd. Warid Husin and Shukur Abu
Hassan (2008), “Performance of Externally Bonded Reinforced Concrete Structures Using Carbon
Fibre Reinforced Polymer in Tropical Climate.” In Mohd. Warid Husin, Abdul Rahman Mohd. Sam,
Jamaludin Mohamad Yatim (Ed.), Advanced Composite Materials: Properties and Applications (pp. 73-
99). Johor Bahru: UTM.
4. Abdul Rahman Mohd.Sam, Shukur Abu Hassan and Mohd.Yunus Ishak (2008). Fibre Reinforced
Polymer Composite in Infrastructure Application. In Mohd. Warid Husin, Abdul Rahman Mohd. Sam,
Jamaludin Mohamad Yatim (Ed.), Advanced Composite Materials: Properties and Applications (pp. 16-
31). Johor Bahru: UTM.
5. Abdul Rahman Mohd.Sam, Shukur Abu Hassan, Yob Saed Ismail, Mohd. Yunus Ishak and
Mohammad Haidir Maslan (2008). Behaviour of Carbon Fibre Reinforced Polymer Plate under Tensile
Load. In Mohd. Warid Husin, Abdul Rahman Mohd. Sam, Jamaludin Mohamad Yatim (Ed.), Advanced
Composite Materials: Properties and Applications (pp. 32-40). Johor Bahru: UTM.
6. Nor Izzah Mokhtar & Shukur Abu Hassan (2016), “Finite Element Modelling for Structural Epoxy.”
In Z. Ahmad (Ed.), Engineering Materials for Specific Application: Mechanical Properties (pp. 55-71).
Johor Bahru: UTM.
7. Shukur Abu Hassan, Mat Uzir Wahit, Umar Abdul Hanan and Siti Khalijah Jamal (2017), “Tensile
Properties of Hybrid Glass Fibre Recyclate-Montmorillonite Nanofiller Composites.” In Wong King Jye
and Zaini Ahmad (Ed.), Structural Composites: Mechanical Properties and Behaviour (pp. 67-81). Johor
Bahru: UTM.
17
Other Publications
1. S. Abu Hassan, “PUSKOM Berjaya Bina Tangki Air GFRP di Pulau Sibu Tengah”, Skudai Post, Mac
2000.
2. S. H. Tapsir, A.R. Mohd. Sam, S. Abu Hassan, “UTM dan JKR Pelopori Teknik Penguatan Jambatan
Konkrit Guna CFRP Pertama di Malaysia”, Skudai Post, Julai 2000.
3. Laporan Akhir Projek Pembinaan Tangki Penyimpanan Air GFRP dan Papak Galas Konkrit di Sibu
Island Resort, Mersing. Technical Report, December 1999.
4. Pengujian ke atas 2 Unit Tangki GFRP Berkapasiti 66,000 Gelen Di Penjara Marang, Terengganu -
ATOSTECH FIBREGLASS SDN BHD. Technical Report, October 2004.
5. Tensile Test Report Carboplate E200 - MAPEI (M) SDN. BHD. Technical Report, June 2007.
6. Tensile Test Report Sikawrap 300C MY - SIKA KIMIA SDN. BHD. Technical Report, August 2007.
7. Flexural Load Test Report for JONCAN GFRP-Steel Bench. Technical Report, July 2013.
8. GFRP Grating Bending Load Test - IPSB SDN. BHD. Technical Report, June 2014.
9. Engineering Analysis Report of Cement Block Machine Rotating Arm - UNIVERSAL ENGINEERING
WORKS. Technical Report, March 2015.
10. Flexural Test Report for Coconut Shell Powder Reinforced Recycle Polypropylene - POLITEKNIK
IBRAHIM SULTAN. Technical Report, April 2015.
11. Tensile Test Report of CSM/epoxy and WR/epoxy - MIIM TRADING. Technical Report, December
2015.
12. Chemical Properties Characterization Rice Husk Ash (RHA) and Reco-Block (RHA Concrete) Test
Report. Polypropylene - POLITEKNIK IBRAHIM SULTAN. Technical Report, January 2016.
13. Technical Report of an Innovative Concrete Brick Design - UNIVERSAL ENGINEERING WORKS.
Technical Report, July 2017.
18
RESEARCH PRODUCTS
First Generation UTM Solar Car (Australia 1996) Second Generation UTM Solar Car (Australia 2001)
Solar Car UTM Project 1995 to 2002
Solar Bicycle UTM Project 1997 to 2000
19
UTM Composites Bridge Project 2003
20
Hovercraft UTM Project 2003
21
Trash-Trap UTM Project 2007- 2017
The First Generation Trash-Trap made of
GFRP installed in UTM 2007
The Fourth Generation Trash-Trap made of
GFRP installed in UTM 2015
22
Amfibia Project (ADRUV) 2015-2016