CTH2005PS I Portable, Coil Heated Split Tank with Control House

• Unitized design for simple, quick setup,ease of servicing and greater reliability.

• Heavy duty channel steel frame forsuperior structural support.

• High density glass fiber insulation forefficient heat retention.

• Self store blocking eliminates need fortimber blocking and reduces setup time.

• Terex Roadbuilding total customer supportsystem is unmatched in the industry.

• 20,000 gal (75,700 L) AC storage capacity,5,000 gal (18,925 L) fuel storage capacity.

TankTank is mounted on a fully continuousheavy duty 15 in (381 mm) - 33.9# steelchannel frame that runs the entire tanklength. Tank shell is 1/4 in (6.4 mm) thickand is double welded with 6 in (152 mm)channel internal supports for superiorstructural strength. Tank heads are 5/16 in(8 mm) thick reinforced with 6 in (152 mm)channels.

Covered with 4 in (102 mm) of semi-rigid3.0# density fiberglass insulation capable ofprotection from 60°F (15.5°C) to 850°F(454°C) with a R-14.8 value andcompressive strength of 10% deformationunder 125 lb/in2 load. Outer aluminumjacket is .025 gauge stucco embossed andis durable and lightweight.

Thermal conductivity is 0.27 B.T.U. persquare foot at 75°F (23.9°C) averagetemperature. Moisture absorption is lessthan 2% by volume.

One 24 in (610 mm) x 24 in (610 mm)inspection manhole on top of tank withexternal and internal ladder provides easyaccess to inside of tank. 4 in (102 mm)internal overflow pipe discharges throughbottom of tank. Asphalt thermometer withdry well.

3 in (76 mm) - 150# flanged asphalt supplyconnection with internal submerged suctionpipe to bottom of tank. 3 in (76 mm) - 150#flanged asphalt return connection withinternal submerged return pipe to thebottom of tank with anti-siphon device. 3 in(76 mm) - 150# flanged asphalt fillconnection has internal line with anti-siphondevice. 2 in (51 mm) NPT drain connectionat bottom of tank with valve.

system. Special configurations of axleplacement are available. One pair of landingjacks installed in front frame with one heavyduty support pad. Ideal for disconnectingtrailer from tractor.

STANDARD EQUIPMENT3 in (76 mm) transport unloading pump,200 gal/min (757 liter) hot oil jacketedpositive displacement pump with integralrelief valve and 15 hp (11kW) TEFC electricmotor with V-belt drive, for primary tank.

Dual compartment tank. Includes internal,double wall, insulated bulkhead used toprovide asphalt and drum burner fuelstorage in a single unit.

Self-store blocking assemblies eliminate theneed for screw jacks and timber blocking.Blocking assemblies consist of crank-typelanding jacks and steel beam cribbing. Thesteel cribbing assembly provides amplestability for storage, parking and setup.Adjustments to the tank leveling are easilyaccomplished even after the plant has beenput into operation.

OPTIONAL EQUIPMENTPiping, valves and jacketed lines tointerconnect 3 in (76 mm) unloading pumpto additional storage tanks.

3 in (76 mm) hot oil jacketed asphalt pipingbetween tank and plant pump, and plantpump to drum including pipe support andflex line hoses.

Piping, valves and jacketed lines tointerconnect 2 in (51 mm) or 3 in (76 mm)plant pump to additional storage tanks.

Interconnecting hot oil jacketed asphaltpiping between compartments or additionalasphalt tanks.

Mounting of hot oil heater on gooseneckand plumbed to hot oil coils and gooseneckfuel tank.

Asphalt level indicators.

Mounting of 3 in (76 mm) transportunloading pump package on gooseneck andconnect jacketed pipe with flex line jumpersto 3 in (76 mm) fill inlet in tank head.

Mounting of plant pump package on rearframe and connect jacketed pipe with flex linejumpers to 3 in (76 mm) suction outlet and3 in(76 mm) by-pass return connection. Thisallows the tank to be backed into locations.

5,000 gal (18925 L) fuel tank includes 4 in(101 mm) pipe fill port, 2 in (50 mm) drainline with 2 in (50 mm) NPT valve. 2 in (50 mm) pipe supply and return lines pipedto fuel pump.

Tank Capacities20,000 gal (75,700 liter) AC storage5,000 gal (18,925L) fuel storage -

Drum Burner420 gal (1,590 L) fuel storage-

Hot Oil Heater

Heating SystemHot oil coil: 986 linear ft (3005 m) of 2 in (50.8 mm) Schedule 40 pipe with 180degree long radius return elbows. Split intwo loops to provide optimum heat transferrate. Located on the bottom, extends thelength of tank for even heat distribution.Heat transfer fluid required: 172 gal (651 L).

Automatic temperature control; mounted,piped, and wired. Adjustable, indicator typetemperature controller with weatherproofhousing. Hot oil solenoid valve on returnside. Wired together with sealtightconnectors.

Includes a 420 gal (1,589.8 L) internal fueltank that is integrally designed into thegooseneck. The entire area on top of thegooseneck is available to mount hot oilheater pumps or other accessories.

Thermometer: 21/2 in (63.5 mm) dial,50-450°F (10-232.2°C) with 12 in (305 mm) stem mounted in drywell.

Control HouseControl House comes with operator’sstation, control console, control system,interconnect wiring, plugs and receptacles,main breaker, transformer and switchgearinstalled. Control House is air conditionedfor operator comfort and for coolingbreakers and switchgear.

Dimensions 8 ft 6 in (259 cm) width x 17 ft10 in (543 cm) length x 9 ft 101/4 in (300 cm) height.

PortabilityDual tire, triple axle and suspension system

with 11R22.5 tires, 5th wheel kingpin, airbrake system, mud flaps, and DOT lighting

CTH2005PS I Portable, Coil Heated Split Tank with Control House

(Clockwise from right) Spacious, airconditioned control house includesall interconnect wiring, plugs andreceptacles required for fast set-up.

Heating system's dual-loop coiloptimizes heat transfer to speedcycle times and help manage fuelcosts.

Steel channel frame-mounted tankand standard dual-tire, triple-axlerunning gear provide sure supportfor quick, reliable transport.

www.terexrb.com • 1-888-TEREXRB

© Copyright 2005 CMI Terex Corporation dba TEREX Roadbuilding TRB-CTH2005PS (08-05)Materials and specifications subject to change without notification.

CTH2005PS I Portable, Coil Heated Split Tank with Control House

Tow-away Unit Dimensions

77 ft 1 in (2,349 cm) overall length57 ft 103/4 in (1764 cm) kingpin to

center axle11 ft 23/4 in (342 cm) width14 ft 23/4 in (433 cm) height

Tow-away Unit Weights

76,000 lb (34,474 kg) total30,000 lb (13,608 kg) king pin46,000 lb (20,866 kg) axles

Tank Insulation

4 in (101 mm) insulation and aluminum skin on tank

Fuel Pump

1.5 hp (1.1 kW) Hauck Fuel PumpFrame-mounted11/4 in (31.75 mm) fuel supply line

plumbed from fuel pump to back end of frame to attach to drum

AC Plant Pump

250 t/hr rated AC plant pump (dual pump design)

2 in (50.8 mm) Viking Pump, L224A3 in (76.2 mm) inlet and outlet7.5 hp (5.6 kW) motor

Unloading Pump

3 in (76.2 mm) Viking Pump Q3415 hp (11.2 kW) motor

Hot Oil Heater

CEI-1200 hot oil heater1,227,000 btu/hr output3/4 hp (0.56 kW) burner motor5 hp pump motor120 gal/min (454 L/min) flow rate

95 gal (360 L) heat transfer fluid required.

Portability

Hutch 9700 tri-axle suspension5 in (127 mm) axles, 108 in (274 cm) track11R22.5 tires

Important Note

All electrical specifications used herein refer to U. S. Standards of voltage andfrequency. Any electrical equipment that is factory installed will be compatiblewith power availability requirements of any customer's country.

CTH2005PSPORTABLE, COIL HEATED SPLIT

TANK WITH CONTROL HOUSE

CTH2005PS I SPECIF ICATIONS

RO

AD

BU

ILD

ING