Post on 21-Mar-2018
Crane & Overhead Lifting Crane Work Platform Cages
Type WP-C
Two person cage, with mesh roof.
Type WP-C2
Four person cage, with mesh roof.
This Cage can also be manufactured to suit First Aid Rescue by fitting an outward opening gate. Please specify when ordering.
All East West Engineering crane work platform cages are designed and manufactured in accordance with AS1418.17, and are supplied with load test certificate, instruction manual, risk control measures and WorkCover registration. Fork pockets fitted for transport purposes only. Personnel cages are supplied with chains, safety harness anchor points, and are painted Safety Yellow enamel.
• Maximum capacity: 2 people
• Safe Working Load: 250 kg
• Unit Weight: 160 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 775 mm
• Maximum capacity: 4 people
• Safe Working Load: 500 kg
• Unit Weight: 400 kg
• Fork Pocket Size: 245 mm x 65 mm
• Fork Pocket Centres: 950 mm
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Type WP-CII
Two person cage, no roof
• Maximum capacity: 2 people
• Safe Working Load: 250 kg
• Unit Weight: 160 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 775 mm
Type WP-CI2
Four person cage, without roof
• Maximum capacity: 4 people
• Safe Working Load: 500 kg
• Unit Weight: 320 kg
• Fork Pocket Size: 245 mm x 65 mm
• Fork Pocket Centres: 950 mm
Crane & Overhead Lifting Crane Work Platform Cages
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Crane Work Platform Cages
Type WP-C4
One person cage, without roof
Type WP-C8
Single person cage, fitted with mesh roof
• Maximum capacity: 1 person
• Safe Working Load: 250 kg
• Unit Weight: 120 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 555 mm
• Maximum capacity: 1 person
• Safe Working Load: 250 kg
• Unit Weight: 150 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 555 mm
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Type WP-C3
One person, circular cage.
• Maximum capacity: 1 person
• Safe Working Load: 250 kg
• Unit Weight: 160 kg
Type WP-C6
6 person cage, fitted with full mesh infill. The front mesh panel above handrail height is removable for working access.
• Maximum Capacity: 6 people
• Safe Working Load: 900 kg
• Unit Weight: 700 kg
Crane & Overhead Lifting Crane Work Platform Cages
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Brick Cage
Type BSN6 Brick Cage
The BSN6 Brick Cage is designed to convey pallets of bricks or similar loose products safely to a work location via overhead crane.
Suitable for 1200mm square pallets (1240mm clear inside), and up to 1500mm overall height. Zinc plated finish. The cage can be supplied as a fully assembled welded unit BSN6W or as a flat pack for self assembly BSN6F which is then bolted together.
• Safe Working Load: 2000 kg
• Lifting Points: 4 point lift
• Unit Weight: 255 kg
SpecificationsInternal Width (mm)
Internal Depth (mm)
Internal Height (mm)
Overall Width (mm)
Overall Depth (mm)
Overall Height (mm)
BSN-6W - Welded 1240 1240 1500 1340 1340 1720
BSN-6F - Bolted 1240 1240 1500 1340 1340 1720
Flatpack
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Type CSPN-01 Goods Cage
Safely convey loose or palletised goods using either forklift or crane. Full width gate allows for 1200mm square pallets to be placed inside. Fitted with crane lifting lugs, fork stirrups and interlocking feet, this versatile cage can also be safely stacked. Zinc plated finish.
• Safe Working Load: 1000 kg
• Unit Weight: 175 kg
Type CGC-01 Goods Cage (No Gate Fitted)
The type CGC-01 Crane Goods Cage is a pallet size cage designed to transport goods using either a Forklift or Crane.
Stacking Feet underneath the Cage allow it to be stacked on top of each other – 3 high when empty, 2 high when full. Cage is supplied standard as a “Flatpack” for on site assembly, or may be fully assembled upon request. Zinc plated finish.
• Safe Working Load: 1000 kg
• Unit Weight: 132 kg
Crane & Overhead Lifting Goods Cages
Flatpack
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Gas Cylinder Cages
Type GCN2 Trolley Cage
Suitable for one type “G” Oxygen and one type “G” Acetylene gas cylinder, with provision to store all hoses inside the cage. The cage is supplied with an internal loadbinder to securely fasten both cylinders.
Fitted with handle, crane lift point, and 400mm diameter air inflated rubber wheels, this cage can be transported manually or by crane. Enamel paint finish.
• Safe Working Load: 250 kg
• Unit Weight: 80 kg
Type GB-CMA Storage Cage
Secure gas cylinder storage cage, suitable for environments such as building sites and mines. Cage is fitted with crane lifting lugs, and fork pockets underneath.
Cage is fitted with a lockable door, and has a full metal roof providing weather protection. A securing load binder prevents cylinder movement during transport. Zinc plated finish.
• Safe Working Load: 750 kg
• Unit Weight: 180 kg
• Fork Pocket Size: 165 mm x 65 mm
• Fork Pocket Centres: 805 mm
Flatpack
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Gas Cylinder Cages
Type GB-SC Gas Bottle Storage Cage
The GB-SC gas cylinder cage is designed for storage and transportation of gas cylinders either by forklift or by overhead crane. The cage is fitted with 4 crane lugs and fork access underneath.
This stackable cage is fitted with double 270 degree opening gates for easy access, and is supplied with load binder to securely fasten cylinders. The cage can be supplied fully assembled or as a flatpack for on-site assembly. Zinc plated finish.
• Safe Working Load: 1000 kg
• Unit weight: 170 kg
Stackable
270 degree opening gates
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Concrete Kibbles
Type CK Concrete Kibble
Concrete Kibbles have been designed for easy transfer of concrete on site by overhead crane.
This lightweight, yet heavy duty kibble can be used for both bottom and side discharge, with the use of the adjustable chute. The unit is lever operated from either side for easy operation, and is also fitted with fork pockets for transport purposes. Enamel painted finish, Safety Yellow.
East West Engineering kibbles are supplied with full instructions, risk and hazard identification manuals.
CK05 with chute in position for side discharge CK10 with chute raised for bottom discharge
Type Capacity SWL Unit Weight Filling Height Transport Dimensions (mm)
CK 05 0.5 cu. m 1500 kg 275 kg 995 mm 1450 x 1540 x 1380 high
CK 10 1.0 cu. m 3000 kg 320 kg 1295 mm 1450 x 1540 x 1680 high
CK05
Dual sided discharge lever CK10 with side discharge chute in position
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Concrete Kibbles
Type CKL Laydown Kibble
The CKL Kibble is a heavy duty roll-over style for use by overhead crane. Suitable for large applications, models are available up to 3 cubic metres. The CKL kibble can be used for either bottom or side discharge with the use of the adjustable chute. The kibble is fitted with a 700 x 400mm clamshell gate which is lever operated.
The easily removable lever can be quickly fitted to either side of the kibble allowing flexible operation. The unit is also fitted with forklift pockets for transport purposes about the work site and has a storage facility for the chute.
Fully adjustable chute
Chute in storage position
Lever operated clamshell gate
Laydown position for filling
Type Capacity SWL Unit Weight Filling Height Transport Dimensions (mm)
CKL 15 1.5 cu. m 4000 kg 825 kg 840 mm 2575 x 1740 x 1790 high
CKL 20 2.0 cu. m 5000 kg 905 kg 960 mm 2760 x 1740 x 1910 high
CKL 30 3.0 cu. m 7500 kg 1170 kg 980 mm 2810 x 2440 x 2095 high
CKL30
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Concrete Kibbles
Type GK Grout Kibble
The GK Grout Kibbles have been designed for bottom dumping of viscous materials including grout or equivalent liquids.
The handle positioning and use of a ‘Layflat’ hose allows an unobstructed view by the operator of the material pour. The unit is designed with a 300mm diameter butterfly valve to allow the operator to control the pour via the handle. Forklift pockets have been provided for transport about the work site.
The interior of the kibble has a smooth surface allowing for easy discharge and quick cleaning.
Type CC215 Concrete Collection Tray
Limit environmental damage onsite by use of the Concrete Collection Tray. This low profile tray fits under the concrete pump to collect spillage washout water and concrete waste. Fitted with fork pockets and crane lugs, the tray is constructed with tapering sides. Enamel paint finish.
• Safe Working Load: 1500 kg
• Capacity: 0.85 cu. m
• Width: 2000 mm
• Depth: 1500 mm
• Height: 375 mm
• Unit Weight: 240 kg
Type Capacity SWL Unit WeightFilling Height
Transport Dimensions (mm)
GK 05 0.5 cu. m 1500 kg 275 kg 1140 mm 1450 x 1450 x 1540 high
GK 10 1.0 cu. m 3000 kg 320 kg 1450 mm 1450 x 1450 x 1840 high
GK 10300mm Butterfly Valve
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Pallet Hooks
Type PHA 2000 Pallet Hook
The PHA 2000 automatic pallet hook is self levelling for easy operation. The unit self balances using an internal spring mechanism ensuring the lifting eye is in the correct position to keep the fork tines horizontal. Tine width is also adjustable on the PHA 2000. Zinc plated finish.
• Safe Working Load: 2000 kg
• Load Centre: 600 mm
• Unit Weight: 196 kg
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Pallet Hooks
Type PHD 2200 Pallet Hook
The PHD 2200 pallet hook is a versatile unit which features adjustable body height and fork tine width positioning, which makes this unit ideal for the transport and construction industry.
Load balancing is carried out by positioning the lifting ring to suit the centre of gravity of the load. Zinc plated finish.
Type PHN 4500 Pallet Hook
A heavy capacity pallet hook suitable for loads up to 4.5 tonne. Fully adjustable tines out to a maximum of 1200mm make this unit extremely versatile.
Load balancing is carried out by positioning the lifting ring to suit the centre of gravity of the load. Enamel paint finish.
• Safe Working Load: 2200 kg
• Load Centre: 600 mm
• Unit Weight: 215 kg
• Safe Working Load: 4500 kg
• Load Centre: 600 mm
• Unit Weight: 456 kg
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Drum Handling
Type CDR Drum Rotator
The CDR Rotator offers 360 degree rotation of 205 litre drums with the use of an overhead crane.
Available in handle or chain rotation, this heavy duty unit is well suited to mining operations, manufacturers and foundries.
This rotator is available in either 500 kg or 1000 kg Safe Working Load. Zinc plated finish.
Type Operation SWL (kg)Unit Weight
(kg)Drum Centre to Lifting Eye (mm)
CDR 500C Chain 500 120 790
CDR 500H Handle 500 120 790
CDR 1000C Chain 1000 220 940
CDR 1000H Handle 1000 220 940
Type CDC-1 Drum Lifter
A simple and safe method for transporting 205 litre drums. The drum is secured into the belly strap with an over centre locking handle with additional safety pin. Zinc plated finish.
• Safe Working Load: 1000 kg
• Unit Weight: 30 kg
CDR 500H
CDR 500H CDR 1000C
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)
Crane & Overhead Lifting Spreader Beams
Type CSB Spreader Beam
The CSB Crane Spreader Beam is available in a range of capacities and lengths to suit any application. Crane Spreader Beams are supplied standard with 5 lift positions and fitted with 2 safety swivel hooks.
The standard finish on all Crane Spreader Beams is painted enamel in ‘Safety Yellow’.
The chart below shows the standard range of Crane Spreader Beams available. Choose the Safe Working Load and Beam length (Dimension ‘A’) to suit your application.
Special width and capacity available on request.
Type BBF4 Bulk Bag Jib
Suitable for lifting bulk bags by overhead crane. Painted enamel finish.
• Safe Working Load: 2000 kg
• Unit Weight: 55 kg
• Hook Centres: 1000 mm
Type Safe Working Load (kg) Dimension “A” (mm) Unit Weight (kg)
CSB 2x2 2000 2000 70
CSB 3x3 3000 3000 110
CSB 5x4 5000 4000 300
CSB 10x4 10,000 4000 480
CSB 10x7 10,000 7000 1350
CUSTOM SIZE AND CAPACITY AVAILABLE ON REQUEST
Crane & Overhead Lifting Bulk Bag Handling
30069486
Proudly distributed byRJ Cox Engineering
www.coxengineering.com.au
Ph: 02)