Course Introduction

Post on 12-Dec-2015

217 views 0 download

description

course introduction

Transcript of Course Introduction

AML883: Properties and Selection of Engineering Materials (3-0-0)

AML751 Materials for Marine Vehicles (3-0-0)

2015-16-I

IIT Delhi

Instructor Details

Ashish Garg Professor Department of Applied Mechanics

Office: III-235 Tel. 011-2659 1252 Email: ashishg@iitd.ac.in

Lectures: Mon, Thu: 9.30-10.50 AM In-class discussions are encouraged

Grading Scheme Minor I: 25% Minor II: 25% Major: 50%

Self study component (25%) will be evaluated in the exams.

Recommended Books: 1. Materials Selection in Mechanical Design by M. F. Ashby

2. Engineering Materials I and II by M. F. Ashby and D. R. H. Jones 3. Materials Engineering, Science, Processing and Design by M. F. Ashby, H. Shercliff and D. Cebon Lecture contents will be shared.

Self  Study  

•  Structure  of  materials  (crystal  structure,  miller  indices,  basic  symmetry  opera6ons)  

•  Phase  equilibria  and  phase  transforma6ons  •  Diffusion  •  Plas6c  deforma6on  and  strengthening  mechanisms  

•  Failure  of  materials  •  Case  studies  on  design  and  selec6on  of  materials  vis-­‐à-­‐vis  specific  applica6ons.  

Books  for  Self  Study  •  “Materials  Science  and  Engineering”  by  V.  Raghavan  –  Chapters  2,  3,  4,  5,  6,  7,  8,  9,  10,  11,  12  

•  “Phase  Transforma6on  in  Metals  and  Alloys”  by  D.A.  Porter  and  K.E.  Easterling  –  Chapter  1  for  knowledge  of  basic  thermodynamics  and  phase  diagrams  

•  Any  other  books  with  similar  contents  can  be  referred  to.