Post on 09-Nov-2018
CORPORATIONS o l u t i o n s S t a r t H e r e
S o l u t i o n s S t a r t H e r e
About UsWe are a company that draws on innovation and excellence to provide solutions that enhance the ability for
caregivers to effectively fulfill their duties. Our goal is to build a high-performing medical technology company
that gives healthcare providers the tools they need to achieve better outcomes.
We are committed to helping our customers deliver safer, more efficient, technologically advanced equipment
to the market place. Caregivers throughout the world look to us for solutions because we strive for excellence
and adhere to their suggestions for improvement. We bring the passion, dedication, innovation and the drive in
developing solutions that matter in making a difference in the lives we help save.
Our products comply with world renowned healthcare standards such as NFPA, HTM, CSA, CE, FDA,
IEC, UL and ISO 13485. We continuously strive to achieve superior clinical results, and push the frontiers of
medical research while maintaining uncompromising clinical integrity.
Our strategic alliances extend to over 30 countries. Our partners rely on us regularly to provide quality turn-key
solutions to better serve the healthcare industry. We take great pride in providing accredited products that meet
and exceed industry requirements.
At SMP, we don’t just make promises, we deliver results!
Toronto
SMP WORLDWIDE Global Distribution
Sales and Service in over 30 Countries
S o l u t i o n s S t a r t H e r e
SECONDARY PRODUCTS
Flowmeters P1
3-Mode Continuous Vacuum Regulator P3
Dual-Mode Intermittent Vacuum Regulator P5
Accessories-Suction Traps P8
Accessories-Humidifiers / Nebulizers P9
Accessories-Collection Bottles P10
Adapters P11
Thoracic Suction Control Unit P13
SMP Theater Suction Trolley P14
Gas Outlets P15
Disposables Devices P17
HOSPITAL BEDS & STRETCHERS
SMP-300ML P21
SMP-350ML P22
SMP-525EL P23
SMP-550EL P24
SMP-450ML P25
SMP-3000 P26
SMP-PB800 P27
SMP-HC700 P28
MEDICAL ARCHITECTURAL SOLUTIONS
Diamond Series™ P29
Quartz Series™ P31
Orion Series™ P33
Fairfield Rail P34
Infinite Series™ P35
Tower Series™ P36
Bed Bumper P37
Bed Docker P38
PATIENT ROOM FURNISHINgS
Overbed Tables P39
Patient Room Seating P40
Bedside Cabinets P41
Medicine Trolleys P47
S o l u t i o n s S t a r t H e r eP1
Flowmeters
SMP Flowmeters are available for both oxygen and medical air, making
SMP the ideal choice for any healthcare facility. Our flowmeters are accurate,
reliable and durable with an easy to use design consisting of fewer parts
offering less maintenance. The flow tubes are made from crack-resistant
polycarbonate housings and calibrated at 50 psig inlet pressure, combined
with a steady machined base. All SMP flowmeters are designed for quick
connection and are compatible with most standard outlets. They come with a
standard 1/8” FNPT connection, but can also be fitted with various adapters
and accessories to meet facility requirements.
Features:• High-quality stainless steel ball float provides
unparalleled accuracy
• Compact in size and weight
• Crack-resistant polycarbonate housing
• Light-weight aluminum body
• Expanded accurate scale
• Durable stainless steel shut-off valve
• Leak-free flow control O-Ring
• Back-pressure compensated
• 100% tested to ensure accuracy
• Available in ISO and US colors
Oxygen Flowmeter (US) Air Flowmeter (US)
Oxygen Flowmeter (ISO) Air Flowmeter (ISO)
Flow
meters
P2
Flowmeter Ordering guide
F M - 1 5 - X X - X X
Control Knob
Adapter (XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE STANDARD) (DN = GERMAN STANDARD) (BS = BRITISH STANDARD) (DS = DISS STANDARD) (PB = PURITAN BENNETT)
Type of Flowmeter ( A = Air)
( O = Oxygen)
OxygenI=WhiteU=Green
AirI=Black U=Yellow
To order Dual Oxygen Flowmeter,
please put “D” in front of “FM”
Example: DFM - 15 - UO - BS
(Dual Oxygen Flowmeter, US Standard
with an British Standard adapter)
Single Oxygen Flowmeterwith 360 º power outlet Dual Flowmeter
Dual Flowmeter with 360 º power outlet
S o l u t i o n s S t a r t H e r eP3
3-Mode Continuous Vacuum Regulator
The SMP 3 Mode Continuous Vacuum Regulator is a perfect combination of clearly
marked indicators and precise calibration, providing the user with a high quality
product for maximum performance and minimum maintenance. In addition, this
vacuum regulator provides a broad selection of fittings ensuring compatibility
with existing vacuum outlets in any medical facility.
Functions:
REG: Allows degree of suction to be adjusted by use of the regulating knob
OFF: Suction is no longer on or being supplied to the patient
FULL: Maximum suction is administered to the patient
Features:• Gauge range: 0 – 300 mmHg
• Gauge accuracy: ±1.6%
• Color coded flow ranges
• Glow in the dark gauge for easy reading under low light conditions
• Gauge available in ISO or US configurations
• Accurate, precise suction control
• Ergonomic design
• Can be sterilized internally with cold disinfectant
• Durable high quality ABS protection body for high impact resistance
• Comes pre-equipped with an overflow safety trap made from high performance precision thermoplastic
• Also available in (0 – 400 mmHg) & (0 – 760 mmHg)
• Shell Color: White or Yellow
Vacuum R
egulator
P4
0-300 mmHg 0-400 mmHg 0-760 mmHg
OFF
REgULATE
FULL
Regulated Vacuum Range
gauge Display Range
Color Coded for Pressure Level
gauge Accuracy
gauge Direction
Flow Rate
Medical Suction Equipment Standard
Warranty Length
0-FULL Line Vacuum 0-FULL Line Vacuum 0-FULL Line Vacuum
0-300 mmHg 0-400 mmHg 0-760 mmHg
± 1.6% ± 1.6% ± 1.6%
Clockwise / Counter Clockwise
Counter Clockwise Clockwise / Counter Clockwise
0-60L/min without fitting at full pressure
0-60L/min without fitting at full pressure
0-60L/min without fitting at full pressure
ISO 10079-3 ISO 10079-3 ISO 10079-3
5 years 5 years 5 years
CONTINUOUS VACUUM REgULATORPRODUCT FEATURES
S o l u t i o n s S t a r t H e r eP5
Dual-Mode Intermittent Vacuum Regulator
The SMP Dual Mode Vacuum Regulator allows for both intermittent and continuous
modes of surgical suction. With its durable design and construction this vacuum regulator
offers maximum performance and minimum maintenance allowing for it to be the ideal
choice of medical practitioners today.
Functions:
REG: Allows degree of suction to be adjusted by use of the regulating knob
OFF: Suction is no longer on or being supplied to the patient
INT: Allows an adjustable suction level that cycles between ON and OFF
Features:• Gauge range: 0 – 300 mmHg
• Gauge accuracy: ±1.6%
• Fully adjustable timing cycle
• Preset at 16 seconds ON, 8 seconds OFF in intermittent mode
• Intermittent mode regulates the flow rate to ASTM standard at 8 LPM
• Glow in the dark gauge for easy reading under low light conditions
• Quiet, reliable operation with pneumatic module
• Gauge available in ISO or US configurations
• Accurate, precise suction control
• Ergonomic design
• Can be sterilized internally with cold disinfectant
• Durable high quality ABS protection body for high impact resistance
• Comes pre-equipped with an overflow safety trap made from high performance precision thermoplastic
• Also available in (0 – 400 mmHg) & (0 – 760 mmHg)
• Shell Color: White or Yellow
Vacuum R
egulator
P6
0-300 mmHg 0-400 mmHg 0-760 mmHg
OFF
REgULATE
FULL
Regulated Vacuum Range
gauge Display Range
Color Coded for Pressure Level
gauge Accuracy
gauge Direction
Flow Rate
Medical Suction Equipment Standard
Warranty Length
0-FULL Line Vacuum 0-FULL Line Vacuum 0-FULL Line Vacuum
0-300 mmHg 0-400 mmHg 0-760 mmHg
± 1.6% ± 1.6% ± 1.6%
Clockwise / Counter Clockwise
Counter Clockwise Clockwise / Counter Clockwise
0-60L/min without fitting at full pressure
0-60L/min without fitting at full pressure
0-60L/min without fitting at full pressure
ISO 10079-3 ISO 10079-3 ISO 10079-3
5 years 5 years 5 years
INTERMITTENT VACUUM REgULATORPRODUCT FEATURES
Vacu
um R
egul
ator
S o l u t i o n s S t a r t H e r eP7
Back Fitting
WITH SUCTION TRAPDISS MALE (NO TRAP)
Bottom Fitting
Example
VYI - 300 - U - DS - T Color: Yellow shell color Mode: Intermittent gauge Range: 0 - 300 mmHg gauge Direction: Clockwise Adapter: DISS adapter Bottom Fitting: Trap * 0-400 mmHg only available in Counter Clockwise
V X X - X X X - X - X X - X
Shell Color(Y = Yellow) (W = White)
gauge Direction( I = Counter Clockwise) ( U = Clockwise)
Bottom Fitting (T = Trap) (N = Nipple)
gauge Range(300 = 300mmHg) (400 = 400mmHg) (760 = 760mmHg)
Adapter(XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE STANDARD) (DN = GERMAN STANDARD) (BS = BRITISH STANDARD) (DS = DISS STANDARD) (PB = PURITAN BENNETT)
DS: Diss OH: Ohmeda
CH: Chemetron
BS: British JS: Japanese
DN: German
Mode(I = Intermittent) (C = Continuous)
P8
Suction Traps
SMP-880VT-0
SMP-880VT-5
SMP-880VT-1
SMP-880VT-6
SMP-880VT-2
SMP-880VT-7
SMP-880VT-3
ST-150
SMP-880VT-4
with no fitting on top
(1/8” NPT Female)
with complete trap fitting assembly (male & female)
with male trap fitting only
with complete DISS female nut & nipple
vacuum fitting
with DISS female nut & nipple
vacuum fitting
with complete DISS female vacuum
hand-tight
with DISS female vacuum
hand-tight
with DISS female vacuum hand-tight
with tubing nipple (5/16” hose barb)
Accessories
Acc
esso
ries
S o l u t i o n s S t a r t H e r eP9
SMP-7200R
SMP-638-3
HUM-R-135
HUM-B-JET
HUM-R-315
NEB-D
SMP-638-1
NEB-R
SMP-638-2
Reusable Humidifier with Silver Top
Disposable Humidifier
Bubble Jet Nebulizer
Multi-Purpose Nebulizer
Disposable Large Volume Nebulizer
Bubble Humidifier Reusable Humidifier Disposable Humidifier
Disposable Humidifier
Humidifiers / Nebulizers
140 ml
400 ml 375 ml 375 ml500 ml
135 ml 315 ml 250 ml 400 ml
Accessories
P10
Collection Bottles
Disposable Collection Jar (Polystyrene)
Disposable Collection Jar (Polystyrene)
Reusable Collection Jar (Polysulfone)
Reusable Collection Jar (Polycarbonate)
Reusable Collection Jar (Polycarbonate)
1800 ml 3000 ml 1800 ml 1800 ml 3000 ml
CB30-PLYCCB18-PLYCCB18-PLYSCB30-PLSY-DCB18-PLSY-D
OXY-T Adult = OXY-MTA Child = OXY-MTC OCN
(1)SLH-M, (2)SLB, (3)SLH-P
Oxygen Connecting Tube Oxygen Mask Oxygen Connector Slide Bracket Bottle Holder
Accessories
1
2
3
S o l u t i o n s S t a r t H e r eP11
Adapters
Gases Model Number Connections
Medical AirNitrous OxideWAGD
OxygenVacuum
Medical AirNitrous OxideWAGD
ADM-OHM-018-OXYADM-OHM-018-VACADM-OHM-018-AIR ADM-OHM-018-N2OADM-OHM-018-WAGD
ADM-OHM-516-OXY ADM-OHM-516-VACADM-OHM-516-AIR ADM-OHM-516-N2O ADM-OHM-516-WAGD
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb
Ohmeda
DISS
DISS (Hand-Tight)
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Carbon dioxide
ADM-DIS-018-OXY ADM-DIS-018-VAC ADM-DIS-018-AIRADM-DIS-018-N2O ADM-DIS-018-WAGDADM-DIS-018-OXY
Chemetron
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
ADM-CHM-018-OXYADM-CHM-018-VACADM-CHM-018-AIR ADM-CHM-018-N2OADM-CHM-018-WAGD
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Puritan-Bennett Stainless Steel
Medical Air
OxygenVacuum
Nitrous Oxide
Medical Air
OxygenVacuum
Nitrous Oxide
ADM-FSA-018-OXY ADM-FSA-018-VACADM-FSA-018-AIRADM-FSA-018-N2OADM-FSA-014-OXYADM-FSA-516-VACADM-FSA-014-AIRADM-FSA-014-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/4” Hose Barb
5/16” Hose Barb1/4” Hose Barb1/4” Hose Barb
FS (AFNOR TYPE: NF S 90-116)
OxygenVacuum
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Chrome-plated Brass
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
SMP-3104-OXY-NT2SMP-3104-VAC-NT2SMP-3104-AIR-NT2SMP-3104-N20-NT2SMP-3104-WAG-NT2SMP-3104-OXY-HB4SMP-3104-VAC-HB5SMP-3104-AIR-HB4SMP-3104-N2O-HB4SMP-3104-WAG-HB5
SMP-3114-OXY-NT2SMP-3114-VAC-NT2SMP-3114-AIR-NT2SMP-3114-N20-NT2SMP-3114-WAG-NT2SMP-3114-OXY-HB4SMP-3114-VAC-HB5SMP-3114-AIR-HB4SMP-3114-N2O-HB4SMP-3114-WAG-HB5
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/4” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
1/4” Hose Barb1/4” Hose Barb
Carbon Dioxide ADM-OHM-018-CO2 1/8” NPT Male
Carbon Dioxide ADM-OHM-516-CO2 5/16” Hose Barb
Nitrogen ADM-DIS-018-N2 1/8” NPT Male
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Carbon dioxide
SMP-3222U-OXY-NT2SMP-3222U-VAC-NT2 SMP-3222U-AIR-NT2SMP-3222U-N2O-NT2SMP-3222U-WAG-NT2SMP-3222U-CO2-NT2
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Nitrogen SMP-3222U-NIT-NT2 1/8” NPT Male
Medical AirNitrous Oxide
OxygenVacuum
Carbon dioxideNitrogen
Medical AirNitrous Oxide
OxygenVacuum
Carbon dioxideNitrogen
ADM-DIN-018-OXYADM-DIN-018-VACADM-DIN-018-AIRADM-DIN-018-N2O ADM-DIN-018-CO2ADM-DIN-018-N2ADM-DIN-516-OXY ADM-DIN-516-VACADM-DIN-516-AIRADM-DIN-516-N2OADM-DIN-516-CO2 ADM-DIN-516-N2
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
ADM-HTM-018-OXY ADM-HTM-018-VACADM-HTM-018-AIRADM-HTM-018-N2OADM-HTM-516-OXY ADM-HTM-516-VACADM-HTM-516-AIRADM-HTM-516-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb
ADM-JIS-018-OXY ADM-JIS-018-VACADM-JIS-018-AIRADM-JIS-018-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
EN737-4 TYPE 2
Anaesthetic gas
Anaesthetic gas
SMP-3106-AGS
SMP-3106-W 5/16” Hose Barb
3/4” Hose Barb
GS (DIN TYPE: DIN 13260-2)
BS (BS TYPE: BS 5682-1998)
Medical AirNitrous Oxide
OxygenVacuum
Medical AirNitrous Oxide
OxygenVacuum
JIS
Medical AirNitrous Oxide
OxygenVacuum
EN737-4 TYPE 1ADM-JIS-018-ETX 1/8” NPT MaleEntonox
P12
Gases Model Number Connections
Medical AirNitrous OxideWAGD
OxygenVacuum
Medical AirNitrous OxideWAGD
ADM-OHM-018-OXYADM-OHM-018-VACADM-OHM-018-AIR ADM-OHM-018-N2OADM-OHM-018-WAGD
ADM-OHM-516-OXY ADM-OHM-516-VACADM-OHM-516-AIR ADM-OHM-516-N2O ADM-OHM-516-WAGD
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb
Ohmeda
DISS
DISS (Hand-Tight)
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Carbon dioxide
ADM-DIS-018-OXY ADM-DIS-018-VAC ADM-DIS-018-AIRADM-DIS-018-N2O ADM-DIS-018-WAGDADM-DIS-018-OXY
Chemetron
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
ADM-CHM-018-OXYADM-CHM-018-VACADM-CHM-018-AIR ADM-CHM-018-N2OADM-CHM-018-WAGD
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Puritan-Bennett Stainless Steel
Medical Air
OxygenVacuum
Nitrous Oxide
Medical Air
OxygenVacuum
Nitrous Oxide
ADM-FSA-018-OXY ADM-FSA-018-VACADM-FSA-018-AIRADM-FSA-018-N2OADM-FSA-014-OXYADM-FSA-516-VACADM-FSA-014-AIRADM-FSA-014-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/4” Hose Barb
5/16” Hose Barb1/4” Hose Barb1/4” Hose Barb
FS (AFNOR TYPE: NF S 90-116)
OxygenVacuum
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Chrome-plated Brass
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
SMP-3104-OXY-NT2SMP-3104-VAC-NT2SMP-3104-AIR-NT2SMP-3104-N20-NT2SMP-3104-WAG-NT2SMP-3104-OXY-HB4SMP-3104-VAC-HB5SMP-3104-AIR-HB4SMP-3104-N2O-HB4SMP-3104-WAG-HB5
SMP-3114-OXY-NT2SMP-3114-VAC-NT2SMP-3114-AIR-NT2SMP-3114-N20-NT2SMP-3114-WAG-NT2SMP-3114-OXY-HB4SMP-3114-VAC-HB5SMP-3114-AIR-HB4SMP-3114-N2O-HB4SMP-3114-WAG-HB5
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/4” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
1/4” Hose Barb1/4” Hose Barb
Carbon Dioxide ADM-OHM-018-CO2 1/8” NPT Male
Carbon Dioxide ADM-OHM-516-CO2 5/16” Hose Barb
Nitrogen ADM-DIS-018-N2 1/8” NPT Male
Medical Air
WAGD
OxygenVacuum
Nitrous Oxide
Carbon dioxide
SMP-3222U-OXY-NT2SMP-3222U-VAC-NT2 SMP-3222U-AIR-NT2SMP-3222U-N2O-NT2SMP-3222U-WAG-NT2SMP-3222U-CO2-NT2
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
Nitrogen SMP-3222U-NIT-NT2 1/8” NPT Male
Medical AirNitrous Oxide
OxygenVacuum
Carbon dioxideNitrogen
Medical AirNitrous Oxide
OxygenVacuum
Carbon dioxideNitrogen
ADM-DIN-018-OXYADM-DIN-018-VACADM-DIN-018-AIRADM-DIN-018-N2O ADM-DIN-018-CO2ADM-DIN-018-N2ADM-DIN-516-OXY ADM-DIN-516-VACADM-DIN-516-AIRADM-DIN-516-N2OADM-DIN-516-CO2 ADM-DIN-516-N2
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
5/16” Hose Barb
ADM-HTM-018-OXY ADM-HTM-018-VACADM-HTM-018-AIRADM-HTM-018-N2OADM-HTM-516-OXY ADM-HTM-516-VACADM-HTM-516-AIRADM-HTM-516-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb5/16” Hose Barb
ADM-JIS-018-OXY ADM-JIS-018-VACADM-JIS-018-AIRADM-JIS-018-N2O
1/8” NPT Male1/8” NPT Male1/8” NPT Male1/8” NPT Male
EN737-4 TYPE 2
Anaesthetic gas
Anaesthetic gas
SMP-3106-AGS
SMP-3106-W 5/16” Hose Barb
3/4” Hose Barb
GS (DIN TYPE: DIN 13260-2)
BS (BS TYPE: BS 5682-1998)
Medical AirNitrous Oxide
OxygenVacuum
Medical AirNitrous Oxide
OxygenVacuum
JIS
Medical AirNitrous Oxide
OxygenVacuum
EN737-4 TYPE 1ADM-JIS-018-ETX 1/8” NPT MaleEntonox
Adapters
S o l u t i o n s S t a r t H e r eP13
Thoracic Suction Control Unit
SMP offers a thoracic suction control unit which is used to measure and adjust a
continuous low vacuum level. This low pressure suction unit is mainly used for thoracic
procedures or neonatology. The unit is standardized throughout every hospital, ranging
from ER’s, Recovery Rooms and ICU’s thus filling the need for continuous low pressure
wherever required. The unit has a durable chamber, safety shut-off valve and allows an
adjustable vacuum pressure between 0-30CMH2O.
The thoracic suction control unit offers an exceptionally accurate adjustment and
ongoing visual control of the vacuum level. The vacuum adjustment is dependent on
physical aspects such as the water level rather than mechanical aspects, thus ensuring
great reliability and stability.
Features & Benefits:• Acrylic body and graduated rod
• Chrome-plated brass head
• Overflow preventative shut- off valve
• Micrometric incremented knob
• Connection available in direct probe type or rail mounting system type
• Rod graduated in centimeters(cm), ensuring the vacuum level reading accuracy
• EN ISO 10079-3 standard compliant
Ordering guide
S M P - T S U - X X
Adapter ( XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) ( JS = JAPANESE)
( DN = GERMAN) ( BS = BRITISH) ( DS = DISS) ( PB = PURITAN BENNETT)
P14
SMP Theater Suction Trolley
Features• Choice of 2 or 4 bottle
holders
• Choice of 2 or 4 3000mL polycarbonate collection bottles
• Choice of adapter
• Choice of vacuum regulator with POM safety trap (0-300 mmHg, 0-400 mmHg, 0-760 mmHg), ISO or US configuration
• 45 cm PVC tube (x1)
Introducing the SMP Theater Suction Trolley, the fully customizable suction trolley ideal for anyplace requiring mobile suction. This sturdy
trolley will provide you with all the necessities to help achieve the greatest results by accomodating to your individual needs. The unit caters
to a number of diverse settings such as hospital rooms, accidents, emergency use and anywhere else where mobile suction is desired.
Ordering guide
• 360 cm PVC tube (x1)
• 200 cm Yankauer suction tip
• Choice of cart with brakes or without
• 3 meters of high pressure hose with hose adapter
• Suction canister holder with 360° pivot capability
• The four-port, on-off valve allows quick change of canisters during suction process
• Allows movement of the regulator in any direction making visual observation of the suction rate easier
S M P - S T - V X X - X X X - X - X - X X - X - X X - X
# of Bottles 2 or 4
Type of Bottles 18 = 1800 mL 30 = 3000 mL
Color of Hose Y = ISO W = US
gauge Direction ( I = Counter Clockwise) ( U = Clockwise)
Castors (L = Lockable Castors) (N = Non-lockable)
Regulator gauge Range (300 = 300mmHg) (400 = 400mmHg) (760 = 760mmHg)
Shell Color Y = Yellow shell W = White shell
Adapter (XX = No Adapter) (OH = OHMEDA) (CH = CHEMETRON) (JS = JAPANESE) (DN = GERMAN) (BS = BRITISH) (DS = DISS) (PB = PURITAN BENNETT)
Mode (I = Intermittent) (C = Continuous)
Note: 0-400 mmHg vacuum regulator only available in counter clockwise gauge
S o l u t i o n s S t a r t H e r eP15
OHMEDA Standard Outlets Diameter-Index Safety System (DISS) Japanese International Standard (JIS)
German Standard Outlets (DIN) British Standard Outlets (BSO)
SMP Canada manufactures a variety of gas outlets to suit the needs of any healthcare facility. These gas outlets
are available in various standards of choice such as: OHMEDA, DISS, JIS (Japanese), DIN (German), and BSO
(British). Each type of gas outlet complies with corresponding standard regulations, and are 100% pressure & leak
tested. SMP gas outlets are available in a full range of mounting options such as Wall type, Console type, and Ceiling.
In addition, each gas outlet is also available with its own gas specific quick adapter.
Gas Outlets
P16
SMP gas Outlet Ordering guide
X X X - X X X - X - X X X - X X
Outlet Standard
(OHM = OHMEDA)
(JIS = JAPANESE STANDARD)
(DIN = GERMAN STANDARD)
(HTM = BRITISH STANDARD)
(DIS = DISS STANDARD)
gas
(OXY = OXYGEN)
(AIR = MEDICAL AIR)
(VAC = VACUUM)
(CO2 = CARBON DIOXIDE)
(N2O = NITROUS OXIDE)
(NIT = NITROGEN)
(AR8 = AIR 800)
(N28 = NITROGEN 800)
(ETX = ENTONOX)
(WAG = WASTE ANESTHETIC GAS)
Type
(WAL = WALL TYPE)
(CON = CONSOLE TYPE)
(WAB = WALL TYPE WITH BOX)
(CEI = CEILING TYPE)
Assembly
(RI = ROUGH IN ASSEMBLY)
(FA = FINISHED ASSEMBLY)
(CS = COMPLETE SET)
Standard
( I = ISO)
( U = US)
Please note:JIS outletsDIN outletsHTM outletsOnly available in ISO standard
Example
OHM - WAL- U - OXY - RI Outlet Standard: OHMEDA Type: Wall Type Standard: US Standard gas: Oxygen Assembly: Rough In Assembly
Gas O
utlets
S o l u t i o n s S t a r t H e r eP17
P-Vac Closed Wound Drainage System
Mini-Vac 50ml Wound Drainage with Drain & Trocar
SMP Canada carries an inclusive range of disposable medical devices to meet all your medical facility needs. Our disposable devices provide
the longest life and the greatest durability; in addition we are accredited with ISO 13485:2003 and CMDCAS certification for quality system
and quality commitment in our operations thus making our medical disposables suitable for regulatory requirement mandated by law. Our
product range is inclusive of the following medical and surgical disposable items:
• Available in 150ml, 300ml, 400ml and 450ml size
• Special packaging allows to save shipping cost and storage space
• Drain port with attached plug comes pre-equipped for emptying exudate collected by the unit
• Standard Y connector for dual drainage and anti-reflux valve is incorporated to prevent reverse flow during emptying and reactivation
• Easy to use
• Completely disposable and portable system
• Available with curved needles of various sizes to match catheter sizes
Model Number: 150ml: PV-150-WD 300ml: PV-300-WD
450ml: PV-450-WD 400ml: PV-400-WD
Model Number: MV-50-WD-TD
Disposable Devices
Disposable D
evices
P18
Silicone Evacuator
Silicone Perforated Drain without Trocar
• Available in 125cc or 200cc
• Silicone type provides easy activation of suction
• Internal anti-reflux valve is incorporated to prevent reverse flow during emptying and reactivation
• The 400ml bulb features dual inlet ports allowing connection of two drains without a Y connector
• Clear reservoir and graduations facilitate the measurement of fluid and exudate
• Indicator dot makes drain placement quick and easy
• Smooth perforations are heat polished for easy, painless removal
• Perforations are positioned in alternate 90° planes for effective exudate removal
Model Number: 125cc: SE-125
200cc: SE-200
Model Number: SPD
Pediatric Feeding Tube
• 2 lateral eyes, rounded tip and fitted with a female Luer adapter
• Flexible adapter with cap, fits any standard Luer tip syringes
• Minimal friction surface with smooth tip ensures easy traumatic intubation
• Transparent lines provide full visibility of line contents
Model Number: PFD
Dis
posa
ble
Dev
ices
S o l u t i o n s S t a r t H e r eP19
Thoracic Drainage Catheter
Thoracic Trocar Catheter
Bubble Tube 30cm
• 2cm graduations
• Made from smooth kink-resistant PVC
• Spiral hole configuration helps reduce tissue invagination for optimal drainage efficiency
• Connector is pre-equipped to facilitate the immediate connection of catheter with the drainage system and secure connection to any sized collection tubing
• Manufactured from non-toxic, medical grade PVC compound
• Catheter tip permits easy insertion while reducing risk of trauma
• Trocar handle helps control insertion and removal
• Dispensed from a single convenient box
• Kink resistant tubing provides superior safety for the patient
• Can be easily cut to desired length with scissors
• Flexible funnel ends attaches easily to most fittings
Model Number: TDC
Model Number: TTC
Model Number: OXY-CTR-30
Disposable D
evices
P20
Irrigation Set (single lead)
• Features drip chamber and roller clamp
• Proximal end fitted with tapered connector
• Individually packed in peelable pouch pack
• Manufactured from non-toxic, non-irritant medical grade PVC
• Single Robert’s clamp located above drip chamber facilitates quick and easy changing of solution bag
Model Number: IS-1
Irrigation Set (dual lead)
Irrigation Set (4 leads)
• Manufactured from non-toxic, non-irritant medical grade PVC
• Individually packed in peelable pouch pack
• Dual Robert’s clamps located above drip chamber facilitate quick and easy changing of solution bags
• Comes with multi-flow dual spikes delivering high flow rates
• Proximal end fitted with flexible latex tubing for easy connection to Endoscope
• Manufactured from non-toxic, non-irritant medical grade PVC
• Dual Robert’s clamps located above drip chamber facilitate quick and easy changing of solution bags
• Proximal end fitted with flexible latex tubing for easy connection to Endoscopes
Model Number: IS-2
Model Number: PFD
Suction Tube
• Available in 45cm, 180cm and 360cm length
• Ribbed connecting tubing for enhanced drape ability
• Multi-fit capability to fit all suction devices and sources
• Reduced friction
Model number: 45cm: CTB-045,
180cm: CTB-180,
360cm: CTB-360
S o l u t i o n s S t a r t H e r eP21
FEATURES: • Central control braking system
• Channel frame construction provides superior strength and reduced weight
• Reinforced frame resists twisting and bending
• Side bumpers included
• 5 inch castors
The SMP-300ML provides users with the greatest comfort, quality, and ease of use. This bed
provides simple and straight-forward operations via the 3 crank system making it the ideal bed
for any healthcare facility. The SMP-300ML is designed to have the benefits for the patient and
caregiver in mind backed by excellent quality standards and years of superior service.
Triple manual crank system
Head and foot board frame made of high quality ABS moulding. Movable head and foot board with a locking mechanism
One-handed side rail release
SMP-300ML Manual Bed
Hospital Beds & Stretchers
TECHNICAL DETAILS:• Size: (L)88.2 x (W)43.3 x (H)17.7-27.6
(unit of measure: in.) (L)2130 x (W) 980 x (H)450-700 (unit of measure: mm)
• Back angle: 0-80° (+/- 5°)
• Patient foot board section: 0-40° (+/- 5°)
• Adjustable height: 17.7-27.6 in. (450-700 mm)
• 4 individual collapsible side rails
• Telescopic IV pole with 4 hooks
• 2 IV pole locations
Hospital B
eds & Stretchers
P22
The SMP-350ML was designed to make the lives of patients and healthcare workers safer
and easier. This revolutionary hospital bed addresses the needs of a wide range of hospital
settings including regular patient rooms in medsurg. It is loaded with regular hospital bed
features, and it has the ability to go lower to the ground than any other bed on the market.
All patients have varying needs that change constantly. Shorter, frail, elderly, and post-
surgery patients benefit greatly from the safety of a bed such is this one.
FEATURES: • Exceptionally low height promotes
proper positioning for safe patient entry and exit
• Full side rail positioning ensures patient safety, essential in acute care environment
• Enhanced mobility and swivel castor functionality at both ends of the bed
• Maximum load capacity: 280 kg
• Central control braking system
Triple manual crank system
Head and foot board frame made of high quality ABS moulding. Movable head and foot board with a locking mechanism Collapsible aluminum side rails that can lock and unlock easily, and quickly
SMP-350ML Manual Bed
TECHNICAL DETAILS: • Size: (L) 83.9 x (W) 38.5 x (H) 11-22.8
(unit of measure:in.) (L) 2130 x (W) 980 x (H) 280-580 (unit of measure:mm)
• Back angle: 0-80° (+/- 5°)
• Patient foot board section: 0-40°
• Adjustable height: 11-22.8 in. (280-580mm)
• 5 inch castors
• Telescopic IV pole with 4 hooks
• 2 IV pole locations
• Conforms to ISO13485:2003 standards
S o l u t i o n s S t a r t H e r eP23
SMP-525EL bed is a remarkable choice in electric beds allowing patients and caregivers to have complete control via the control panel
conveniently located on side rail. In addition, the SMP-525EL bed comes complete with plenty of features making it perfectly suited
for any healthcare facility. This bed offers an economical solution to users without sacrificing features important to acute care delivery.
FEATURES: • Safest design to help caregivers get patients in
and out of bed
• Extraordinary one button function puts the bed in ideal position for patient transport
• Enhanced mobility and swivel castor functionality at both ends of the bed
• IV pole guides built into the push handles
• Four wheels adopt central control system
• Conforms to ISO13485:2003 standards
Bed controls located on the interior and exterior of head side rails. One-handed side rail release
SMP-525EL Electric Bed
Hos
pita
l Bed
s &
Str
etch
ers
Attendant control panel located at the foot end of the bed allows caregivers direct control over critical functionalities
Bed litter specifically designed for greater breathability
TECHNICAL DETAILS: • Size: (L) 85.4 x (W) 35.4-40.2 x (H) 18.9
(unit of measure: in.) (L) 2170 x (W) 900-1020 x (H) 480 (unit of measure: mm)
• Back angle: 0-65°
• Patient foot board section: 0-45°
• Adjustable height: 17.7-28.3 in. (450-720mm)
• Trendelenburg angle and Reverse Trendelenburg angle: 0-10°
• Maximum load capacity: 250 kg
Body contour feature to reduce patient discomfort during the motion of the litter sections.
P24
SMP-550EL Electric Bed With Electronic Central Braking System
Hospital B
eds & Stretchers
As the needs of caregivers continue to evolve in the medical-surgical unit, SMP has designed a bed that is made
to improve your efficiency at work and hence, increasing patient outcomes significantly. The SMP-550EL electric
bed represents a true evolution of care in the medsurg environment. It defines itself through its ease of use, safety
considerations and product quality. Simple yet efficient, the SMP-550EL is the ultimate choice for care.
FEATURES: • One-handed side rail release
• Patient lock-out controls
• Dual wheel castors
• 4 IV Pole sockets
• Battery back-up
• 10° Trendelenburg and Reverse Trendelenburg
• Electronic central braking system allows castors to lock with just one button
• Newly designed power connection prevents accidental snapping of power cable
• Fully covered base to ensure easy maintenance and cleaning of bed with no sharp edges. Allows for optimal infection control
• Conforms to ISO13485:2003 standards
Detachable head/foot board made of polypropylene plastic allows for easy cleaning and long term use.
TECHNICAL DETAILS:• Size: (L) 91.3 x (W) 41.3 x (H) 20.9-28
(unit of measure: in.) (L) 2320 x (W) 1050 x (H) 530-710 (unit of measure: mm)
• Hi-Low: 20.9 - 28 in. (530mm-710mm)
• Back-rest lifting angle: 0-65°
• Knee-rest lifting angle: 0-45°
• Trendelenburg Angle & Reverse Trendelenburg Angle: 0-10°
• Loading Capacity: 250kgAn HBSW, IEC, FDA compliant side rail design ensuring optimal safety.
Body contour feature made of soft connection to reduce patient discomfort during the motion of the litter sections.
Hos
pita
l Bed
s &
Str
etch
ers
S o l u t i o n s S t a r t H e r eP25
FEATURES: • Retractable fifth wheel steering system
• Clearly marked arrows allow users to operate easily
• Light weight & easy to clean
• 2 IV pole sockets
• Central locking system
• Integrated oxygen bottle holder
• Back rest adjustable by gas spring, other functions adjustable by hydraulic mechanism
• One-handed side rail release
• Conforms to ISO13485:2003 standards
SMP-450ML Transport Stretcher
TECHNICAL DETAILS:• Size: (L) 75.2 x (W) 26.5 x (H) 19.7-35.4
(unit of measure: in.) (L) 1910 x (W) 673 x (H) 500-900 (unit of measure: mm)
• Hi-Low: 19.7-35.4 in. (500 – 900 mm)
• Self weight: 79 kg
• Load bearing: 159 kg
• Packing: 0.98 CBM/PC
Introducing the SMP-450ML manual transport stretcher for patient transport. This bed offers a modern design for
quick and effective patient transport making it a simple yet economical solution for all healthcare facilities. Enhanced
features such as a retractable fifth wheel facilitate efficient patient transport for today’s healthcare professionals.
Hospital B
eds & Stretchers
P26
FEATURES:
• Back rest adjustment assisted by hydraulic
• Foldable side guards, easy and safe handling, solid and hygienic construction, no danger of accidental crushing
• Chassis and upper part features - smooth and sealed coated plastic sheets for optimal hygienic cleaning and disinfection
• 200mm castors with central locking
• Fifth castor for easy maneuvering
• Minimum height of 550mm allows easy use for the patient and hospital staff
• High / Low, Trendelenburg / Reverse Trendelenburg positions
TECHNICAL DETAILS:
• Overall length: 85 in. (2160 mm)
• Width: 30.3 in. (770 mm)
• Height range: 21.7 – 34.3 in. (550 – 870 mm)
• Trendelenburg: 15°
• Reverse Trendelenburg: 15°
• Back rest angle: 90°
• Patient surface length: 76.8 in. (1950 mm)
• Patient surface width: 24.4 in. (620 mm)
• Back section length: 28.7 in. (730 mm)
• Weight: 110 kg
• Safe working load: 225 kg
• Castor diameter: 7.9 in. (200 mm)
SMP-3000 Hydraulic Patient StretcherIntroducing the SMP-3000 hydraulic patient stretcher for patient transport. This stretcher offers a modern design for quick and effective
patient transport making it a simple yet economical solution for all healthcare facilities. Enhanced features such as a retractable fifth wheel
facilitate efficient patient transport for today’s healthcare professionals.
• Easy adjustment by levers located on both sides
• X-Ray translucent back rest
• Patient belt for fastening
• Oxygen tank holder
• Height adjustable stainless steel IV pole
• Washable at 95° F, fire retardant, mattress cover
• Plastic crash bumpers
• Easy to clean, plastic coating, telescoping pistons
• Electrostatic painted metal frame
• Functional board (Optional)
S o l u t i o n s S t a r t H e r eP27
SMP-PB800 Electric Pediatric BedThe SMP-PB800 is the ideal hospital bed for pediatric patients. To help ease the transition between home and hospital environments, this
bed, with its various features and cutomizable decorations helps children feel more secure so they can sleep comfortably. Be assured, when
it comes to the child’s comfort and their safety, the SMP-PB800 is the perfect choice.
FEATURES:
• Power operated back and leg rest adjustment
• Hand control unit
• Auto contour
• Hygienic design (PP), lockable and tuck away side rails
• Removable head and foot ends
• Lockable and tuck away side rails
TECHNICAL DETAILS:
• Height range: 20.5 in. (520 mm)
• Back rest Angle: 70°
• Leg rest Angle (Max.): 38°
• Underbed clearance: 6.7 in. (170 mm)
• Overall length: w73 in. (1855 mm)
• Width: 36.6 in. (930 mm)
• Castor diameter: 4.9 in. (125 mm)
• Product weight: 90 kg
• Safe working load: 180 kg
• Electrostatic painted metal frame
• Height adjustable stainless steel IV pole
• Plastic crash bumpers
• Angled gauge for back
• Comprehensive range of accessories available
• Trendelenburg position (Optional)
Hos
pita
l Bed
s &
Str
etch
ers
P28
Home is where the heart is and there is simply no place like it. Most people want to remain in their homes when faced with a medical condition that
limits mobility. SMP Canada is there to help when such dire times arise. Introducing the SMP-HC700, SMP’s next generation of home care beds.
With unsurpassed style, comfort and quality, the SMP-HC700 can help make your home environment as safe and comfortable as possible.
FEATURES: • 2 pc. electro-motor, 1pc. control box, 1pc. handset
• Solid wood outside, powder spray painting steel
• Optional: Aluminum alloy side rails
Two Sections I.V. Pole (Four Hooks)Frame: Stainless steel
Collapsible aluminum side rails that can lock and unlock easily, and quickly
SMP-HC700 Electric Home Care Bed
Hospital B
eds & Stretchers
TECHNICAL DETAILS:• Size: 84.25 X 40.16 X 15.75 (unit of measure: in.)
2140 X 1020 X 400 (unit of measure: mm)
• Angle of back section: 0~80° (±5°)
• Angle of leg section: 0~40° (±5°)
Med
ical
Arc
hite
ctur
al S
olut
ions
S o l u t i o n s S t a r t H e r eP29
- Single Tier Horizontal HeadwallDIAMOND SERIES TM
Available Laminate Colors:
Features & Benefits:• Ergonomically placed medical gases and electrical services
• Adapts easily for varying acuity levels
• Customizable to meet facility requirements
• Two full length, fully functional integrated equipment management tracks to organize extra equipment and resources (Choice of standard type Dovetail or optional Fairfield Rail)
• Various laminate colors available to match any room décor
• Ability to accommodate almost any layout of medical gas outlet, electrical and communication devices
• Built with internal raceways for electrical and gas separation
• Available in single and double tier configurations
• Integrated room and reading light (optional)
• CE, HTM, NFPA, UL, and cUL compliant
Area Of Use:• Patient Rooms
• ED/ Trauma
• PACU
• ICU
• NICU
• Special Procedure
Blossom Cherry
Smoky Brown Pear
Espresso Pear
*Additional laminate colors available upon request
P30
1
23
4
1. Fire retardant antimicrobial endcap
2. Integrated room and reading light (single or dual)
3. Dovetail or Fairfield rail
4. Pull chain switch or Décora light switch
Technical Drawing:Diamond Series 1 Tier Headwall Surfacemount 84"
SMP-DSHW-1T-084
Key Features:
Wild Cherry Acajou Mahogany
Natural Oak
Medical A
rchitectural Solutions
S o l u t i o n s S t a r t H e r eP31
Features & Benefits:• Smart profile design with infection control measures
• Sleekest profile available in the industry
• Customizable to any desired length
• Various laminate colors available to match any room décor
• Removable front fascia for ease of installation and maintenance
• Anodized aluminum front fascia
• Galvanized steel back box
• Multiple back box service knock outs
• Adjustable side mounting brackets
Smart spacing solutions with single cut out dimension for all accessories:
• Electrical devices are 2.5” (63.5 mm) center to center between services
• Medical gas outlets and slide brackets are 5.0”
• (127.0 mm) center to center between services
• CE, HTM, NFPA, and UL Compliant
Area Of Use:• Patient Rooms
• ED/ Trauma
• PACU
• ICU
• NICU
• Special Procedure
Available Laminate Colors:*Additional laminate colors available upon request
- Patient Service Console UnitQUARTZ SERIES TM
Med
ical
Arc
hite
ctur
al S
olut
ions
Blossom Cherry
Smoky Brown Pear
Espresso Pear
P32
Quartz Series Patient Care Console Unit Recessed
SMP-CON-RC-13g
Technical Drawing:
European configuration with Blossom Cherry laminate
North American configuration with Espresso Pear laminate
Wild Cherry Natural Oak
Medical A
rchitectural Solutions
S o l u t i o n s S t a r t H e r eP33
Med
ical
Arc
hite
ctur
al S
olut
ions
ORION SERIES TM
Examination Light Reading Light Ambient Light Night Light
The innovative Orion Series™ over bed light provides an aesthetically
pleasing design to any care facility. The luminaire features a unique
direct and indirect light to meet the requirements of an acute care
or general patient room. The Orion Series™ is manufactured with
the highest safety and infection control measures making this light a
preferred choice of healthcare professionals today.
Features & Benefits:
• T5-6063 lightweight extruded aluminum
• Option of color powder coat or anodized aluminum finish
• Fire retardant, impact and scratch resistant injection molded plastic end caps
• Optional antimicrobial AGION finish also available
• Built-in LED light driver
• Quick connect and disconnect circuits
• Electronic Ballast compatible to 110 - 277 volts
• Emergency shut off switch in case of accidental impact
• Designed to accommodate the latest and most efficient lamps and ballasts
• Fire retardant acrylic material
• High performance extruded shatter resistant linear acrylic lens with internal flutes
• Smooth exterior for ease of maintenance
• Gently fluted inner surface provides even dispersion of light and reduces glare
• Lens comes in clear or frosted finish.
Housing
Electrical
Lens
To order your Orion Series™ overbed light please contact your local SMP rep for further details.
P34
FAIRFIELD RAIL
The SMP Fairfield rail system offers unique benefits to healthcare providers in terms of expandability,
flexibility, adaptability, productivity, ergonomics and aesthetics.
Features & Benefits
• Customizable lengths to meet facility requirements
• The rail system is easy to install
• Various laminate colors available to match any room décor
• Rail can be replaced easily
Ordering guide
S M P - F R L - X X X
Length of rail in Inches
SMP - FRL - 120 Size of rail: 120 inches
* NOTE: Rail comes standard with Antique White laminate. For additional colors please contact your sales rep.
Example
• Caregivers can set up the rail system to support preferences and to meet facility-wide protocols
• Helps improve work place productivity
• Work space setup can be changed instantly, without tools
Available Laminate Colors
*Additional laminate colors available upon request
1. Natural Birch2. Oiled Olivewood3. Espresso Pear
1. 2. 3.
Med
ical
Arc
hite
ctur
al S
olut
ions
S o l u t i o n s S t a r t H e r eP35
INFINITE SERIES TM
The Infinite Series™ headwall is designed to eliminate space limitations
encountered in facilities today. It has proven to be an efficient way to
streamline your patient services in a unique
vertical configuration at the bedside.
Features & Benefits:• Easily accessible for caregivers, no reaching over patients
• Customizable to service two beds
• This vertical headwall can be customized for services in a variety of configurations
• Available in any width or length, with many surface laminate color finishes to choose from
• Two accessory rails that can accommodate a wide variety of accessories
• Piping and wiring manifolded to a single point connection
• Removable front panels for easy maintenance
• Available in recessed or surface mount
• Patent pending customizable built in light (Optional)
Area Of Use:• ICU
• LDR
• NICU
– Vertical Flatwall
Available Laminate Colors:
*Additional laminate colors available upon request
1. Blossom Cherry
1. 2. 3. 4.
2. Espresso Pear
3. Oiled Olivewood
4. Natural BirchCurved Profile
Integrated Accessory Rails
Built In Light (Optional)
• Emergency Room
• Patient Recovery Room
Medical A
rchitectural Solutions
P36
TOWER SERIES TM
The Tower Series™ system is an effective space saving solution for any
critical care area. Its unique design allows
for adaptability to any room requirement.
Features & Benefits:• Centralized services give staff easy access to the patient
• Each column is custom built to suit specified needs of the hospital
• The multi-rail vertical system provides the hospital team with flexibility to adapt accessories to different situations
• Proven to be a valuable use of space, efficient manager of services and equipment
• Available in a wide range of laminate colors, sizes and configurations
• 360˚ services access
• Removable front panels for easy maintenance
• Piping and wiring manifolded to a single point connection
• Patent pending customizable built in light (Optional)
Area Of Use:• ICU
• NICU
– Power Column
Available Laminate Colors:
*Additional laminate colors available upon request
1. Wild Cherry
1. 2. 3. 4.
2. Acajou Mahogany
3. Oiled Olivewood
4. Natural Oak
• Emergency Room
• Patient Recovery Room
Side View
Curved Profile
Integrated Accessory Rails
Built In Light (Optional)
S o l u t i o n s S t a r t H e r eP37
The SMP Bed Bumper is an economical way to provide protection for both, the bed and the wall while properly
positioning the bed.
Features & Benefits:• Sleek design
• Allows caregivers to properly align the bed
• Available in different sizes
• Custom colors available for Vinyl covers & End caps
• Made from continuous 6063-T5 aluminum
• End caps made of injection molded thermoplastics
• Smooth surface allows for easy cleaning & infection control
BED BUMPER
Med
ical
Arc
hite
ctur
al S
olut
ions
P38
The SMP Bed Docker is uniquely designed to prevent damage to hospital beds and walls, while providing exceptional
aesthetics to a patient’s room.
Features & Benefits:• Angled receptacles on both sides protect connections from high-low bed positioning
• The bed locator can be equipped with both normal power and emergency power, telephone jack, communication system receptacle, bed receptacle, dedicated night light and low voltage controller
• The unit holds up to eight devices angled to be easily accessible by caregivers
• Various color options available to match room décor
• Can be fully integrated with any headwall system
BED DOCKER
Available Laminate Colors:*Additional laminate colors available upon request
Natural Birch OiledOlivewood
Espresso Pear
Cocoa Maple Smoky Brown Pear
Acajou Mahogany
Medical A
rchitectural Solutions
S o l u t i o n s S t a r t H e r eP39
SMP-400-OBT• Width : 40 x 80 cm
• Height Range : 79 - 104 cm
• Laminate Surface
• Overbed table with Gas / Spring Mechanism
• Lockable castors
SMP-404-OBT• Width : 42 x 80 cm
• Height Range : 79 - 104 cm
• ABS Plastic Surface
• ABS Overbed table with Gas / Spring Mechanism
• Lockable castors
SMP-405-OBT• Width : 40 x 76.5 cm
• Height Range : 79 - 104 cm
• Compact Laminate Surface (HPL)
• Overbed table with Gas / Spring Mechanism
• Lockable castors
SMP-406-OBT• Width : 40 x 76.5 cm
• Height Range : 79 - 104 cm
• Compact Laminate Surface (HPL)
• Overbed table with Gas / Spring Mechanism
• Lockable castors
SMP-407-OBT• Width : 40 x 76.5 cm
• Height Range : 81 - 108 cm
• Compact Laminate Surface (HPL)
• Overbed table with Gas / Spring Mechanism
• Lockable castors
Available Colors
Overbed Tables
Patient Room Seating
P40
Sitting Position
• Width : 72 cm
• Depth : 94 cm
• Height: 106 cm
• Adjustable to up to 175° angle
SMP-505-ACB
Sitting Position
• Width : 78 cm
• Depth : 88 cm
Bed Position
• Width : 75 cm
• Depth : 197 cm
• Sleek design
• Easy to maneuver
• Ergonomic & smart design
• Easy to clean leather cover
• Easy to maneuver
Bed Position
• Width : 75 cm
• Depth : 197 cm
SMP-503-ACB SMP-500-ACB Sitting Position
• Width : 75 cm
• Depth : 88 cm
SMP offers a superior patient room seating selection to enhance virtually any healthcare space. Our option of recliners and loveseat
sleepers are manufactured to provide the highest standard in performance, comfort and style. Keeping the needs of overnight guests
in mind, SMP is surely to provide a solution that is just right.
S o l u t i o n s S t a r t H e r eP41
Bedside Cabinets
SMP-301-BSC• Width : 50 cm
• Depth : 40 cm
• Height: 79 cm
• Laminated chipboard body
• Single drawer
• Single cupboard
• Cross lockable castors
SMP-305-BSC• Width : 52 cm
• Depth : 43 cm
• Height: 83 cm
• Laminated chipboard body supported with aluminum profile
• ABS plastic top surface
• Single drawer
• Single large drawer
• Cross lockable castors
SMP-302-BSC• Width : 43 cm
• Depth : 48.5 cm
• Height : 76.5 cm
• Laminated body
• Single drawer
• Single large drawer
• Cross lockable castors
Bedside Cabinets
SMP-305-3-BSC• Width : 52 cm
• Depth : 47.5 cm
• Height : 83.5 cm
• Laminated chipboard body supported with aluminum profile
• ABS plastic top surface
• 2 drawers
• Single large drawer
• Cross lockable castors
SMP-306-BSC• Width : 52 cm
• Depth : 47.5 cm
• Height: 82 cm
• Cooling Capacity
• Laminated chipboard body
• Single drawer
• Cross lockable castors
• Fridge (35 L.)
SMP-306S-BSC• Width : 45 cm
• Depth : 45.5 cm
• Height: 83 cm
• Steel body supported with aluminum profile
• Compact Laminate Surface (HPL) material top surface
• HPL front panel
• HPL drawer
• HPL drawer with ABS plastic separator
• Fridge (35 L.)
• Cross lockable castors
P42
S o l u t i o n s S t a r t H e r eP43
Bed
side
Cab
inet
s
SMP-307-BSC• Width : 46 cm
• Depth : 47 cm
• Height: 85 cm
• Steel body supported with aluminum profile
• Compact Laminate Surface (HPL) material top surface
• HPL front panel
• HPL drawer with ABS plastic separator
• Cross lockable castors
SMP-307S-BSC• Width : 45 cm
• Depth : 45.5 cm
• Height: 77 cm
• Steel body supported with aluminum profile
• Compact Laminate Surface (HPL) material top surface
• HPL front panel
• HPL drawer with ABS plastic separator
• Cross lockable castors
SMP-308-BSC• Width : 46 cm
• Depth : 47 cm
• Height: 85 cm
• Steel body supported with aluminum profile
• Compact Laminate Surface (HPL) material top surface
• HPL front panel
• HPL drawer with ABS plastic separator
• Cross lockable castors
Bedside Cabinets
SMP-308S-BSC• Width : 45 cm
• Depth : 45.5 cm
• Height: 77 cm
• Steel body supported with aluminum profile
• Compact Laminate Surface (HPL) material top surface
• HPL front panel
• HPL drawer with ABS plastic separator
• Cross lockable castors
SMP-4901-BSC • Width: 48.5 cm
• Depth: 48.5 cm
• Height: 77 cm
• ABS construction
• Kettle base
• Towel hangers located on both sides
• Available Colors: Blue, Green, Dark Grey, White
SMP-4902-BSC • Width: 48.5 cm
• Depth: 48.5 cm
• Height: 77 cm
• Towel hangers located on both sides
• Pull-out food tray
• 2 inch castors for easy maneuverability
• Available Colors: Blue, Green, Dark Grey, White
P44
S o l u t i o n s S t a r t H e r eP45
Bed
side
Cab
inet
s
SMP-4904-BSC • Width: 48.5 cm
• Depth: 48.5 cm
• Height: 90 cm
• ABS construction
• Pull-out food tray
• Shoe shelf
• Kettle base
• 2 inch castors for easy maneuverability
• Available Colors: Blue, Green, Dark Grey, White
SMP-4905-BSC • Width: 48.5 cm
• Depth: 48.5 cm
• Height: 77 cm
• ABS construction
• Cup and Thermometer repository
• Pull-out food tray
• Towel hangers located on both sides
• Available Colors: Blue, Green, Dark Grey, White
SMP-4903-BSC
• Width: 48.5 cm
• Depth: 48.5 cm
• Height: 90 cm
• ABS construction
• Pull-out food tray
• Shoe shelf
• Kettle base
• Available Colors: Blue, Green, Dark Grey, White
SMP-460-BSC • Width: 49 cm
• Depth: 49 cm
• Height: 80 cm
• Stainless Steel construction, ABS top
• Pull-out shoe shelf
• 2 inch castors for easy maneuverability
SMP-470 -BSC • Width: 48 cm
• Depth: 48 cm
• Height: 75 cm
• Metal frame construction, ABS components
• Towel hangers located on both sides
• Pull-out shoe shelf
• 2 inch castors for easy maneuverability
• Kettle base inside the cabinet
SMP-500-BS• Width: 53 cm
• Depth: 52 cm
• Height: 72 cm
• Metal frame construction, ABS components
• Towel hangers located on both sides
• Pull-out food tray
• Pull-out shoe shelf
• 2 inch castors for easy maneuverability
SMP-4906-BSC• Width: 48.5 cm
• Depth: 48.5 cm
• Height: 77 cm
• ABS construction
• Cup and Thermometer repository
• 2 inch castors for easy maneuverability
• Pull-out food tray
• Available Colors: Blue, Green, Dark Grey, White
Bedside Cabinets
P46
S o l u t i o n s S t a r t H e r eP47
Medicine Trolleys
SMP-850EB• Width: 85 cm
• Depth: 52 cm
• Height: 101 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• 5 layers of drawers
• Stainless steel top plate
• Equipped with: 2 waste bins, needle disposal container, sliding side board, transparent filing box, oxygen cylinder holder, CP board & IV pole
• 4 swivel noiseless castors with brakes
SMP-850M• Width: 85 cm
• Depth: 52 cm
• Height: 101 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• 6 layers of drawers with lock key system
• 50 medicine boxes in each drawer
• Equipped with: 2 garbage bins, transparent filing box, sliding side board, hanging device with 5 hooks
• 4 swivel noiseless castors with brakes
SMP-700A• Width: 76 cm
• Depth: 58.5 cm
• Height: 101 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• 42 case-history folder compartments with lock key system
• One multi-purpose sliding drawer
• Light weight
• 4 swivel noiseless castors (2 with brakes)
SMP-700C• Width: 76 cm
• Depth: 58.5 cm
• Height: 104.5 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• 6 layers of small drawers & 3 layers of big drawers
• Drawers contain various medicine boxes for different storage purposes
• 4 swivel noiseless castors (2 with brakes)
SMP-700D• Width: 85 cm
• Depth: 65 cm
• Height: 110 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• Equipped with: 2 sliding side boards, IV pole with 8 hooks, 2 storage shelves below large multipurpose drawer
• 4 swivel noiseless castors (2 with brakes)
SMP-800A• Width: 73.5 cm
• Depth: 60 cm
• Height: 105 cm
• Aluminum-Alloy, ABS plastic and stainless steel construction
• Marble surface
• Equipped with: 6 layers of drawers with 10 dividers in each drawer for medicine storage, waste-storage bin at the bottom of trolley
• 4 swivel noiseless castors with central-locking braking system
P48
Secondary Medical Products Canada10 Sims Crescent, Richmond Hill Ontario, L4B-1K9 CanadaTel: (905) 764-7767 Fax: 1-866-627-9798www.smpcanada.com info@smpcanada.com
Distributed By:
PART NUMBER: CA-COR-48-NA-X.X 05.12