CoreLine Wall mounted ST˙. x - Philips · WL130V CoreLine Wall mounted ˜x ST˙.ˇ x x ST˙. x 70...

Post on 03-Oct-2020

2 views 0 download

Transcript of CoreLine Wall mounted ST˙. x - Philips · WL130V CoreLine Wall mounted ˜x ST˙.ˇ x x ST˙. x 70...

WL130V

CoreLine

Wall mounted

4xST3.9 x 25

1xST3.5 x 12

70

197

197

350

I mains (A)

I nom.

Time (us)Tref

max/2

I max

O

Inrush current

Dimensions in mmATTENTION

OBSERVE PRECAUTIONSFOR HANDLING

ELECTROSTATICSENSITIVEDEVICES

!

The luminaire shall be installed by a quali�ed electrician andwired in accordance with the latest IEE electrical regulations orthe national requirements.This luminaire is not suitable for use as emergency lighting.The light source contained in this luminaire shall only bereplaced by the manufacturer or his service agent or asimilar quali�ed person.For use in environments where an accumulation of conductivedust on the luminaire may be expected.

-

--

-

43

66

4

LED12S LED20S

Electrical characteristics

Imax (A) 12.3 21.3

Tref (µs) 1.44 1.84

MCB Luminaires Max.

B-10 A 20 20

B-13 A 25 25

B-16 A 32 32

C-10 A 33 33

C-13 A 43 43

C-16 A 54 54

P1

indoor outdoorD IK08IP65 25 °C

TaGLOWWIRE

650 °CIP64

1/40000 000 00000© 5 / 2018, Philips Lighting Holding B.V. All rights reserved

Printed in ChinaData subject to change without noticeKeep for future reference: www.lighting.philips.com

CCT (K)

Lumen

(lm) P (W) Driver Options

220V240V

50Hz60Hz kg

WL130V LED12S

830 / 840

1200 12

PSU

NA

· ·1.15

WL130V LED20S 200022 NA

23 MDU 1.20

NL

2

1

7

30

NL

Min. H05RN-F 2x1,00 mm2

Max. H05RN-F 2x1,50 mm2

Ø6-Ø10 mm

Max. 10 luminaires.

4xST3.9 x 25

3 4

1 2

0.5NmP1

OPEN

CLOSED

123456123456 78

! IP64 3x

5a 5b

2/4

HF Motion Sensor (For WL130V LED20S MDU only).

By selecting the combination on the DIP switch, sensor data can be precisely set for each speci�c application.

HF Motion Sensor

Daylight sensor. (default 10 lux.)The sensor can be set to only allow thelamp to illuminate below ade�ned ambient brightness threshold.

50 lux, 25 lux: twilight operation,10lux, 2lux: darkness operation only.When set to Disable mode, the daylightsensor will switch on the lamp whenmotion is detected regardless of ambientlight level.

7 8 9 Lux

I on on on 2

II on on - 10

III - on - 25

IV on - - 50

V - - - Dis-able

ON

Hold time. (default 20 min.)Refers to the time period the lamp re-mains at 100% illumination afterno motion detected.

4 5 6 Time

I on on on 5 s

II - on on 30 s

III on - on 90 s

IV - - on 3 min

V on on - 20 min

VI - - - 30 min

ON

Detection area. (default 100%)Detection area can be reduced byselecting the combination on the DIPswitches to �t precisely each application.

1 2 3 %

I on on on 100

II - on on 75

III on - on 50

IV - - on 25

V - - - 10

ON

ST3.5 x 12

0.5NmP1

5c

3/4

© 2018 Philips Lighting Holding B.V.All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.The information presented in this document does not form part of any quotation or contract, is believed to be accurate andreliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.

Philips Lighting Holding B.V.The Netherlands

4/4