Post on 12-Jan-2016
Copyright (c) 2005 Pearson Education Canada, Inc. 5-1
PowerPoint PresentationStan Hatfield . Southwestern Illinois College
Ken Pinzke . Southwestern Illinois College
Charles Henderson . University of Calgary
Chapter 5
Weathering and Soil
PowerPoint Presentation
Stan Hatfield . SW Illinois College
Ken Pinzke . SW Illinois College
Charles Henderson . University of Calgary
Tark Hamilton . Camosun College
Copyright (c) 2005 Pearson Education Canada Inc. 5-2
Earth’s External Processes
Weathering - the mechanical breakdown (disintegration) and chemical alteration (decomposition) of rock at or near Earth’s surface
Mass wasting - the transfer of rock and soil downslope under the influence of gravity
Erosion – the physical removal of material by mobile agents such as water, wind, or ice
Copyright (c) 2005 Pearson Education Canada Inc. 5-3
Weathering
Two predominant types of weathering• Mechanical weathering - breaking of rocks into
smaller pieces by physical forces• Chemical weathering – involves chemical
transformation of minerals in rock into one or more new mineral compounds plus dissolved ions
Copyright (c) 2005 Pearson Education Canada Inc. 5-4
Mechanical Weathering• Five types of mechanical weathering
– Frost wedging – repeated freezing and thawing of water in fractures and cracks promotes the disintegration of rocks; causes great destruction of Canada’s highways every spring
– Unloading – joints & exfoliation as sheets of igneous and metamorphic rocks at the Earth’s surface due to a reduction in confining pressure
– Thermal expansion – alternate expansion and contraction due to heating and cooling, forest fires, winter, solar flares on Mercury & Moon’s Dayside!
– Bioturbation – disintegration resulting from bacteria, plants (roots) and animals: bugs, clams, bears
Copyright (c) 2005 Pearson Education Canada Inc. 5-5
Frost Wedging!
Copyright (c) 2005 Pearson Education Canada Inc. 5-6
Frost Wedging!
Copyright (c) 2005 Pearson Education Canada Inc. 5-7
Unloading Joints, Devonian GraniteGreen Point NS. (Photo by Bruce Railsback)
Copyright (c) 2005 Pearson Education Canada Inc. 5-8
Sheet Joints: Stone Mountain Gerogia
Copyright (c) 2005 Pearson Education Canada Inc. 5-9
Thermal Spallation: Fires, Intrusions, Drilling
Copyright (c) 2005 Pearson Education Canada Inc. 5-10
Bioturbation: Root Wedging & Mining!
Copyright (c) 2005 Pearson Education Canada Inc. 5-11
Mechanical Weathering
Mechanical weathering increases the surface area exposing more surfaces to chemical weathering.
This can lead to spheroidal weatheing, and curved rocks from original planar joints & fractures.
Copyright (c) 2005 Pearson Education Canada Inc. 5-12
Chemical Weathering
Chemical Weathering• Breaks down rock components and internal
structures of minerals• Most important agent involved in chemical
weathering is water (responsible for transport of ions and molecules involved in chemical processes)
Copyright (c) 2005 Pearson Education Canada Inc. 5-13
Rates of WeatheringClimate
Temperature and moisture are the most crucial factors affecting chemical weathering rate
Water (polar molecules) is the best solvent for ions
Chemical weathering is most effective in areas of warm, moist climates, deep red laterite soils
In the tropics rocks are weathered over 100 m deep
This is why bauxites all form in the tropics
Chemical weathering is ineffective in alpine & polar regions because frigid temperatures keep moisture locked up as ice (permafrost, glaciers), regolith
Different times in Earth history, Different climate
Copyright (c) 2005 Pearson Education Canada Inc. 5-14
Four major processes of chemical weathering• Oxidation
– Any chemical reaction in which a compound, atom or ion loses electrons: Fe 2+ Fe 3+ + e-
– Important in decomposing ferromagnesian minerals in air
• Hydrolysis– Smaller, acidic Hydrogen ions H+ replaces other positive ions
• Hydration– The addition of water to minerals or the solvation of their ions
• Dissolution– Further aided by small amounts of acid in the water
– Soluble ions are retained in the underground water supply
– Ions eventually concentrate in the ocean or playa lakes
Chemical Weathering
Copyright (c) 2005 Pearson Education Canada Inc. 5-15
Chemical Weathering
Copyright (c) 2005 Pearson Education Canada Inc. 5-16
Alterations Caused by Chemical Weathering
• Pyrite is the most unstable common mineral weathering to limonite & sulphuric acid (ARD)
• Decomposition of unstable minerals (olivine, glass)• This creates all soils and many sediments• Generation or retention of materials that are stable
– Sheet Silicate Clays, Oxides, Hydroxides
• Physical changes such as the rounding of corners or edges caused by water having greater access to corners by flowing through joints; is called spheroidal weathering
Copyright (c) 2005 Pearson Education Canada Inc. 5-17
Alterations Caused by Chemical Weathering
Spheroidal weathering of extensively jointed rock.
Copyright (c) 2005 Pearson Education Canada Inc. 5-18
Weathering Rind on Limestone Boulder
Copyright (c) 2005 Pearson Education Canada Inc. 5-19
Acid Rock Drainage
Copyright (c) 2005 Pearson Education Canada Inc. 5-20
Salt Wedging
Salt Wedging – A special type of mechanical plus chemical weathering
Arid landscapes where evaporation > precipitation
Dry coastal areas where seaspray can evaporate
Evaporation concentrates salts in crack & joint tips
Dried salts are hygroscopic (pulls moisture from air)
Chemical weathering wedges between mineral crystals
Copyright (c) 2005 Pearson Education Canada Inc. 5-21
Rates of Weathering
Rock Characteristics• Rocks containing silicate minerals (granite, gneiss,
sandstone) are relatively resistant to chemical weathering
• Evaporite deposits of halite, gypsum, anhydrite dissolve & can form caves or cause collapse of overlying landscapes
• Rocks containing calcite (marble and limestone) readily dissolve in weakly acidic solutions & form caves (karst)
• Shales are compacted rather than cemented so they hydrate & fall apart readily. They weather recessively.
• Fine grained and glassy volcanic rocks weather readily & tend to generate rich soils quickly
• Silicate minerals weather in the opposite order from their order of crystallization (see Bowen’s Reaction Series)
Copyright (c) 2005 Pearson Education Canada Inc. 5-22
Dissolution of Joints in Anhydrite, Iowa
Copyright (c) 2005 Pearson Education Canada Inc. 5-23
Differential Weathering
• Masses of rock do not weather uniformly due to regional and local factors
• Results in many unusual and spectacular rock formations and landforms, such as the hoodoos of Drumheller, Alberta
• The number and spacing of joints can be a significant factor
• Mudstone versus sandstone• Variable cementation or cement solubility
Copyright (c) 2005 Pearson Education Canada Inc. 5-24
Honeycomb Weathering
Copyright (c) 2005 Pearson Education Canada Inc. 5-25
Hoodoos & Badlands
Copyright (c) 2005 Pearson Education Canada Inc. 5-26
Soil
Soil has been called the bridge between life and the inanimate world
• Soil is Life’s (bacteria’s) modification of rocks to make them more useful, supply nutrients, hold water
Soil is an important interface; a common boundary where different parts of a system interact
• Soil is that portion of the regolith (rock and mineral fragments produced by weathering) that supports the growth of plants; it is a combination of mineral and organic matter (humus), water, and air
Copyright (c) 2005 Pearson Education Canada Inc. 5-27
Soil
Composition (by volume) of a soil in good condition for plant growth.
Copyright (c) 2005 Pearson Education Canada Inc. 5-28
Controls of Soil Formation
Parent Material• Residual soils – parent material is the underlying
bedrock e.g. Regolith, Laterite, Bauxite• Transported soils – forms in place on parent
material that has been carried from elsewhere and deposited e.g. Alluvial, Glaciomarine
Copyright (c) 2005 Pearson Education Canada Inc. 5-29
Time and Climate• Time
– Important in all geologic processes
– Amount of time for soil formation varies for different soils depending on geologic and climatic conditions
• Climate– Most influential control of soil formation
– Key factors are temperature and precipitation
Controls of Soil Formation
Copyright (c) 2005 Pearson Education Canada Inc. 5-30
Plants and Animals and Slope• Plants and animals
– Organisms influence the soil’s physical and chemical properties
– Also supply organic matter to the soil; mostly plants– Microorganisms like fungi and bacteria play an active role
in the decay of plant and animal remains
• Slope– Steep slopes often have poorly developed soils– Optimum terrain is a flat-to-undulating upland surface– South facing slope in Northern Hemisphere will receive a
great deal more sunshine, which will influence soil character
Controls of Soil Formation
Copyright (c) 2005 Pearson Education Canada Inc. 5-31
Controls of Soil Formation
The parent material for residual soils is the underlying bedrock; soils thin where slopes become steeper.
Copyright (c) 2005 Pearson Education Canada Inc. 5-32
The Soil Profile
• Soil forming processes operate from the surface downward
• Vertical differences are called horizons – zones or layers of soil
• There are five distinct horizons designated as O, A, E, B, and C
Copyright (c) 2005 Pearson Education Canada Inc. 5-33
• O horizon – organic matter (humus)• A horizon – organic and mineral matter
– High biological activity
– Together the O and A horizons make up the topsoil
• E horizon – little organic matter– Zone of eluviation and leaching
The Soil Profile
Copyright (c) 2005 Pearson Education Canada Inc. 5-34
• B horizon – zone of accumulation
• C horizon – partially altered parent material
The O, A, E, and B horizons together are called the solum, or “true soil”
Well developed soil profiles are called mature and indicate environmental conditions have been stable for a long time; some soils lack horizons and are called immature
The Soil Profile
Copyright (c) 2005 Pearson Education Canada Inc. 5-35
The Soil Profile
Well-developed soils show distinct layers called horizons.
Copyright (c) 2005 Pearson Education Canada Inc. 5-36
The Soil Profile
Idealized soil profile from a humid, mid-latitude climate.
Copyright (c) 2005 Pearson Education Canada Inc. 5-37
Soil Types
The characteristics of each soil type primarily depend on the prevailing climatic conditions
Three very generic soil types• Pedalfer
– Accumulation of iron oxides and Al-rich clays in the B horizon
– Organic-rich soil
Copyright (c) 2005 Pearson Education Canada Inc. 5-38
Three very generic soil types• Pedalfer continued
– Best develops under forest vegetation– Develops in humid, temperate climate
• Pedocal– High accumulations of calcium carbonate– Calcium carbonate cemented soils known as
caliche or hardpan– Less clay than Pedalfer– Associated with dry grasslands and brush
vegetation as seen in the prairies
Soil Types
Copyright (c) 2005 Pearson Education Canada Inc. 5-39
Caliche: Hardpan soils, Perched water tables
Copyright (c) 2005 Pearson Education Canada Inc. 5-40
Three very generic soil types• Laterite
– Hot and wet tropical climates
– Intense chemical weathering
– Intense leaching removes soluble material
– Concentrates iron and aluminum; the former giving these soils a distinct red colour
Soil Types
Copyright (c) 2005 Pearson Education Canada Inc. 5-41
Laterite: Triassic-Modern, Gainesville GA
Copyright (c) 2005 Pearson Education Canada Inc. 5-42
Generalized descriptions of Canadian soil types as recognized by the Canadian Soil Classification System.
Soil Types
Copyright (c) 2005 Pearson Education Canada Inc. 5-43
Generalized distribution of Canadian soil types.
Soil Types
Copyright (c) 2005 Pearson Education Canada Inc. 5-44
Ancient Soils• Paleosols
– Serve as valuable indicators of land areas
– To be preserved, paleosols must reside in an area where it can be buried (lowland areas)
– Oldest are Proterozoic (2 billion years old) and indicate that oxygen levels had reached a critical level to allow the rusting of iron
Soil Types
Copyright (c) 2005 Pearson Education Canada Inc. 5-45
Paleosol: a fossil or buried soil
Copyright (c) 2005 Pearson Education Canada Inc. 5-46
• Recycling of Earth materials; part of rock cycle
• Natural rates of soil erosion depend on– Soil characteristics
– Climate
– Slope– Type of vegetation
Soil Erosion
Copyright (c) 2005 Pearson Education Canada Inc. 5-47
Rates of Erosion• In many regions the rate of soil erosion is
significantly greater than the rate of soil formation• Single cropping agriculture loses cm/yr!• Swidden (slash & burn) & clearing rainforests • Availability of good soils is critical for rapidly
increasing world’s population• Sedimentation and chemical pollution
– Related to excessive soil erosion– Occasionally soil particles are contaminated with
pesticides
Soil Erosion
Copyright (c) 2005 Pearson Education Canada Inc. 5-48
The Dirty End of Chapter 5