Post on 06-Nov-2021
COOBER ECUKTM 390 DUKE2017-2020
www.coober.eu Instruction manualEU
2
Remove rear- and front seat1
COOBER ECU KTM 390 DUKE
3
Use allen key (hex key) #5 ( A ) to remove the ignition coil cover ( B )
2
A
B
www.coober.eu
COOBER ECU KTM 390 DUKE
4
Use side cutter to remove the orange zip tie
3
COOBER ECU KTM 390 DUKE
5
Starting from the rear seat compartment, route the harness on the left side
4
www.coober.eu
COOBER ECU KTM 390 DUKE
6
Route the TPS connector above the engine to the other side
5
COOBER ECU KTM 390 DUKE
7www.coober.eu
COOBER ECU KTM 390 DUKE
8
Unplug injector( A )6
A
FUEL INJECTION
COOBER ECU KTM 390 DUKE
9
Connect COOBER fuel injector plug ( A ) to stock plug ( B )
Connect COOBER fuel injector plug ( A ) to fuel injector ( B )
7
8
A
A
B
B
A
www.coober.eu
COOBER ECU KTM 390 DUKE
10
Connect COOBER crank signal connector to stock connector
9CRANK SIGNAL
COOBER ECU KTM 390 DUKE
11
Connect COOBER ignition ( A ) to ignition coil ( B )
Add ignition cover back ( A ) (take care on ground line)
10
11
A
A
B
B
IGNITION
A
www.coober.eu
COOBER ECU KTM 390 DUKE
12
AC
Plug in COOBER connector ( A ) into stock TPS connector ( B ), then plug in COOBER connector ( C ) into TPS device ( D )
12TPS
D
BA
COOBER ECU KTM 390 DUKE
13
Zip tie COOBER harness ( A ) to frame ( B )
13
A
A
A
FIXING
B
www.coober.eu
COOBER ECU KTM 390 DUKE
14
Route harness ( A ) to back and zip tie ( B ) it to the frame ( C )
14
B
A
C
A
COOBER ECU KTM 390 DUKE
15
Route ground wire ( A ) under the frame ( B ) and connect it to the battery ground (-)
15GROUND
A
B
A
www.coober.eu
COOBER ECU KTM 390 DUKE
16
Connect COOBER ECU ( A ) to main connector ( B )
16
A B
Warning! Fix the harness and connectors with zip ties!
COOBER ECU KTM 390 DUKE
17
Install COOBER AirLid
Use allen key (hex key) #4 to remove the airbox cover
1
2
www.coober.eu
COOBER AIR-LID KTM 390 DUKE
18
Use allen key (hex key) #4 to remove the catalytic converter cover
Use allen key (hex key) #5 to remove the clamp bolts
1
2
COOBER DE-CAT KTM 390 DUKE
19
Use 8mm and 12mm key to remove the mid muffler screws ( A ) on each side of the mid muffler
A
3
www.coober.eu
COOBER DE-CAT KTM 390 DUKE
20
A
A
COOBER DE-CAT KTM 390 DUKE
21
Install COOBER De-Cat pipe and add brake fluid can back into position
Unscrew the brake fluid can ( A ), and take out the catalytic converter
A
4
5
www.coober.eu
COOBER DE-CAT KTM 390 DUKE
Bolt everything back, mount the clamp and tight it.
6
www.coober.eu
COOBER DE-CAT KTM 390 DUKE