Post on 19-Jun-2015
description
Evidence Of Constructing TOC (Table of Contents)
•Second Draft•Final Draft
Second Draft
Firstly, I selected a background fill (grey) and used the paint bucket tool and
clicked the blank page.
The first image is a picture that I took to run through each page. The second image is the transformation
made when increased the . I increased the Brightness to +27 because it illuminated the page more. Then, I
applied Black/White to enhance the brightness evermore.
I incorporated the same text for the Contents Page. I used the Punk Kid font which I researched online and found on a website called http://www.1001fonts.com/. I chose this font because it
really features the elements of punk rock. I added two effects; Inner Glow and Outer Glow.
I transmitted the font to the contents page and it appeared as shown below.
I experimented with different effects but I really liked the appearance with the Inner Glow and Outer Glow because it made it
more alerting and drew a real amount of attention.
Generating the Sub - Image
According to the grunge requirements, they undermine perfection so I used the snipping tool and cut around the outline of the model, it gave me a messy obscure effect which really
enhanced the black white more.
After that, I selected the paint bucket tool and selected the black colour, then I drew out a rectangular shape because this will be the area I will place the feature list.
This feature tab was produced on PowerPoint, I achieved this by selecting the shapes option and searching for the
block arrows features and I chose the first one.
I had to rotate the arrow and by transforming it to 18 degrees.
I formatted the shape by changing to no fill, then
to a orange border also, I changed the line style so
it would enhance the arrow.
I created the arrow using publisher, I chose the Block Arrow option and selected the
first option (red box). Then, once drew out the arrow I right clicked and I formatted
the arrow because I wanted to enhance the appearance.
Here, I wanted to include a page number with a banner that was outlandish. By achieving this I chose the 12 star feature. I the
formatted shape with a different line style because it drew more
attention to the design. I changed the page number (3) to
a different colour (Gold).
I decided to include rectangular boxes which will separate the
content pages. I did this by selecting the rectangle tool and mapped out where I wanted it
to go.
I produced these banners on publisher. I formatted the shape and selected yellow for the line colour. After that, so I right
clicked the shape and clicked ‘Edit Text’. I typed the page numbers with using the font stencil with a font size of
The contents listed differ with text, hues of grey and sizes. For ‘Upcoming Events’ is used the font Stencil and set the size to 34 then, for ‘Pearl Jam Concert Page 3’ I used Stencil again with the same font size but the font colour is light grey. For, ‘Reviews’ I set the font at Stencil with the same font size but a darker grey and for the Interview page it’s the same not
including the font colour which is a darker grey. However, the last content listing- below GIG GUIDE the text is different to the rest of the content. The
font setting for that listing is Century Gothic with a font size of 18.
Final Draft
Setting the Background
Again, I set the background with
a grey fill. This grey fill is the border that is
Again, the changes of the background. The
effects is used to achieve the punk vibe.
Generating The Font I didn't alter the font because I liked the consistency of the feature; how the colours are bold and make a
statement and the yellow represents a warning sign
Before
After
Here, I inserted a black box because I wanted to enhance the text when entered. I searched the left tool bar and I selected the Gradient tool bar.
Here, I had to inserted a quote from a famous Nirvana track (Lithium). “I got a bomb in my temple that is going to explode”. I carefully achieved this by zooming in the text and I separated the black font with the
white font.
I also set the text at Italics because it was easier for me to distinguish what letter stops at
the given colour.
By producing this convention I had to select a shape and I chose a ‘Rounded Rectangle’
after, I right clicked the shape selected format Shape then, I chose to a yellow colour for a
solid fill then I wanted to incorporate text so I right clicked the shape and clicked ‘Edit Text’.
‘LITHIUM! DELIVERED TO YOUR DOOR FOR JUST £2 PER MONTH!’ is all in capital letters
and underlined.
This font was originally horizontal but I tilted it to give it an edgy appeal. The font I used was Stencil
and I set the font size at 54.
Get! Get!
This is a very significant element to the magazine which I forgot to add to the second
draft. I created this by clicking on the text option and then clicked on where I wanted to
place is and types the issue number which consists a white fill with the font size at 34
and the font is Franklin Gothic type.
Here, I added a black filled thin box by click on the Rectangle tool and drew out where I wanted it ( below the title page
and above the plug). I used the transformation tool to adjust the box
because I wanted the length and height to be perfect.
I added a thin yellow rectangular box which appears below the features listings and above the quote. As mentioned already I selected the
rectangle tool and mapped out where I wanted it to go.
This is the end result of my Table Of Contents.