Post on 21-Mar-2018
06 41 00.11/COM
CompX Security Products
Architectural Specifications Guide
compx.com
Section 06 41 00.11 cabinet locks, door / drawer locks, file frame systems, gang locks, electronic access control locks
Cabinet eLock C8109 RegulatoR® with SlamCAM File Frame System Type 250
BHMA Grade 1 BHMA Grade 2 StealthLock® Wireless cabinet eLock
The Advantage Plus feature allows users to remove the cylinder while the lock remains
in place. No mounting screws need to be removed.
Simply use a 5/64" Allen wrench from the back to remove
the lock cylinder for re-keying.
Application. For drawer, right hand and left hand doors. 90° cam turn, for overlay application, the combined thickness of front and frame cannot exceed the cylinder length. Four or five pin available in 26D, 4, & 4G finish. Master keying available.
CompX National Drawer part numbers.For flush mount C8102 – material thickness to 3/4" C8106 – material thickness to 1 1/8" C8108 – material thickness to 1 3/8"
For lipped / overlay mount C8101– for material thickness to 5/8" C8103 – for material thickness to 7/8" C8109 – for material thickness to 1 1/2"
Application. Plunger style bolt action for sliding wood doors and requires 7/8" diameter mounting hole. Four or five pin available in 26D, 4 finish. Master keying available.
CompX National part numbers. C8142 – cylinder length 1 1/8" C8143 – cylinder length 1 3/8"
CompX National Part number. C8140, in 26D finish only – ratchet type grips inner bypassing sliding glass door, lock case blocks outer door.
Finish codes. 3 – Bright brass 4 – Satin brass 4G – Antique brass 26D – Dull chrome
Pin Tumbler Cylinder Cam Locks, Sliding Glass/Wood Door Locks
All locks with this symbol feature the Advantage Plus system.
BHMA Grade 1 C8179, BHMA Grade 2 C8188 C8109 C8142 C8140
Pin Tumbler Door & Drawer LocksDeadbolt+ Locks. Application. For drawers, right hand and left hand doors. Surface mounted and requires 57/64" diameter hole for cylinder. Four or five pin tumbler available in 26D, 4, & 4G finish. Master keying by request.
1st & only BHMA certified dead bolt cabinet locks – A156.11-2014
Grade 1: BHMA designation. E07041 for drawer, E07121 for door. Made to order.
Grade 2: BHMA designation. E07042 for drawer, E07122 for door. STOCK LOCKS® product.
CompX National Doors part numbers. C8173* – material thickness to 7/8" C8174* – material thickness to 1 1/8" C8175* – material thickness to 1 3/8"
CompX National Drawer part numbers. C8178* – material thickness to 7/8" C8177* – material thickness to 1 1/8" C8179* – material thickness to 1 3/8"C8180* – material thickness to 1 5/8"
Cam+ Locks. Application. For drawer, right hand or left hand. Surface mounted and requires 57/64" diameter hole for cylinder. Cam style with 90° turn. Four or five pin available in 26D, 4, & 4G finish. Master keying available.
CompX National part numbers. C8183 – door, material thickness to 7/8" C8188 – drawer, material thickness to 1 3/8"
CCL R-1 keyways.CCL-R1 keyway pin tumbler door and drawer locks, dead bolt+ type, available in cylinder lengths of: 7/8", 1 1/8", 1 3/8." Spacers are available for varying material thickness. Cam style locks also available in same lengths as CompX National pin tumbler door and drawer locks.
Reference CompX National part numbers pin tumbler door and drawer locks.
Note: All CompX National and CCL keyway pin tumbler locks are
brass, not die-cast.
* Certified Grade 2 locks also available for MRI applications — non-ferrous or non-magnetic versions. Made to order.
with American components
06 41 00.11/COM
CompX Timberline locks comply with ANSI/BIFMA standards
X5.9 – 2004 – storage units
X5.3 – 2007 – vertical files
X5.5 – 1998 – desk products
X6.5 – 2001 – small / home office
l Seven finishes
l 5 disc tumbler lock core
l Removable lock core
l 500 key codes; all locks master keyed; numbered on lock face and keys
l Designed for ¾" thick material; most mount in 16.5mm diameter hole
l Available in horizontal and vertical mount versions
l Multiple cam setbacks for inset and overlay applications
l Double door Type 250, lock both doors without the use of a catch
l Most mount in ¾" thick material
l Available in horizontal and vertical mount versions
l 90˚ and 180˚ rotation
l Multiple cam setbacks for inset and overlay applications
l Thick panel CB-170, adjustable from ¾" to 1-3/8" thick material
l Lock multiple drawers with one lock in pedestals, desks and lateral files
l Available in front and side mount systems
l Central locking systems for desks and credenzas
l Mounts within ½" drawer suspension
l Meets ANSI/BIFMA standards for strength and durability
l Ensures that only one drawer will open at a time
l Mounts within ½" drawer suspension
l Vertical mount for wardrobe units
l Horizontal Mount for overhead storage units
l Two point locking, locks units up to 104" tall or wide
l Available for single / double swinging doors and sliding bypass glass doors
l Horizontal and vertical mount
l Compression mount and bore through styles
l Engineered metal filing system in attractive black or white finish
l Durable design handles heavy loads
l Interlocking components allow for easy installation and adjustability
ANSI/BIFMA standards
Lock features
Deadbolt locks
Cam locks
Gang lock systems
Anti-tip
Wardrobe locks
Glass door locks
File Frame
Double Door Latch.Eliminate the elbow catch.
Watch the video compx.com/ddl
Eliminates the need for an elbow catch, or other devices, and allowshardware to be installed out of the way.
w No need to reach inside cabinet to release elbow catch
w Doors can be closed in any order
w Low profile Latch mechanism reduces product footprint inside cabinet
w Requires use of a single lock (sold separately)
w Allows two or three point locking for standard or wardrobe style double door cabinets when used with a lock
w Easy to install and use
w Exceeds pull force above 150lbs
Types 250, 281 Types 170, 184 System 100 Glass Door Lock NEW! Double Door Latch
Kits contain one each:latch, activator and catch
SIGNIFICANT ENGAGEMENT BETWEEN THE
CATCH AND LATCH INCREASES SECURITY
CATCH ON THE NON-LOCKING DOOR ACTS AS
A SLAM LATCH AND DOES NOT REQUIRE REACHING
INTO THE CABINET
LATCHCATCH
ACTIVATOR
StealthLock works via radio frequency which allows wireless locking of multiple cabinet openings. Can be used with wood, phenolic resin and glass materials.
l Transmitter Pad can activate multiple Receiver Latches
l Transmitter Pad operates within a 15 ft range, no wiring required
l Programmable user and supervisor codes
l Receiver Latch fits within ½" drawer suspension clearance
l Uses 4 – AAA batteries for the Receiver Latch and CR2032 coin battery for the Transmitter Pad
l Low battery indicator
l Passage – User must manually lock
l Self-Lock – Receiver Latch automatically relocks
l Single / Shared Use – Allows user to choose their code at time of operation
l Healthcare cabinetry
l Lockers
l Office, reception and conference furniture
l Audio visual cabinets
l Retail/Display cabinets
l Residential closet, liquor and kitchen cabinetry
Features and Functions
Modes of Operation
ApplicationsStealthLock® — Keyless, Invisible Cabinet Locking System
Keyless, Invisible Cabinet Locking System
Visit stealthlock.com to watch videos and for more infornation
Keyless locking made easy!Electronic push button cabinet locks can be installed easily on new or retrofit applications.The RegulatoR is available in two versions: self-locking and manual locking.
Self-locking features SlamCAM, a spring loaded latch, which allows the user simply to close the cabinet door or drawer — no need to return the knob to the locked position.
Manual locking Manual locking version requires users to rotate the knob into the unlocked and locked positions. Daily / Shared Use Mode allows for revolving user code; multiple users may use the RegulatoR without having to re-program the RegulatoR each time.
RegulatoR is easy to use
l 20 codes per lock: 19 user codes and one supervisor code; code length is 4-8 digits
l Available in two versions — self-locking featuring SlamCAM and manual locking
RegulatoR is easy to maintain
l Low battery indicator
l 75,000 cycles; extended battery life reduces replacement and labor/maintenance costs
l Battery compartment is easily accessible from the outside of the cabinet
RegulatoR is easy to install
l Four different keypad configurations: left and right hand, vertical and top vertical (available in both self-locking and manual locking)
l Install on new or retrofit applications
l Uses ¾" mounting hole
Note: location of door hinges determines hand of door when
facing door, i.e. if hinges are on the right, order right hand mount.
* Self-locking and manual locking are available on both vertical and
horizontal versions of RegulatoR.
REGULATOR WITH MANUAL LOCKING*
REGULATOR WITH SELF-LOCKING SLAMCAM* SLAMCAM
Self-locking Features
Manual locking
ü Self-locking, featuring SlamCAMü 75,000 cycles – 2 AAA batteries included ü
ü Convenient external battery installation/removal ü
ü Low battery indicator ü
ü 19 user codes and 1 supervisor code ü
ü ADA compliant ü
ü Satin chrome or matte black finish ü
ü Three cylinder lengths – 7/16", 1-3/16", 1-3/4" ü
Shared/daily use mode ü
Technician code ü
ü Easy to clean membrane keypad ü
ü Installs on wood or metal cabinet doors and drawers ü
ü Spacers provide additional latching dimensions
Applications:l cabinet doors
or drawersl lockersl storage
enclosuresl file cabinetsl computer
server racks
Markets:l healthcarel schools/
universitiesl health clubsl laboratoryl office furniturel retail display
Features 150 Series 200 Series 300 Series
250 user capability ü
1500 event audit trail (software required) ü
LockView® 5 software (optional) ü ü
Stand alone; not network capable ü ü
Three modes of access: keypad, HID Prox and HID iCLASS ü ü ü
Battery operated ü ü ü
Cabinet application ü ü ü
Surface mount for refrigerator/freezer application ü ü ü
Access control ü ü ü
Motor-driven latching mechanism provides the convenience of automatic relocking ü ü ü
Door security switch; notifies if door is ajar or for unauthorized entry (option) ü ü ü
3000 user capability ü ü
15,000 access event audit trail (software required) ü ü
500,000 temperature data points (software required) ü ü
Monitors internal temperature 100°C to -100°C ü ü
Temperature monitoring ü ü
LockView® 5Pro software (required for 300 Series’ networking features) ü
Wi-Fi (802.11g) capable ü
Ethernet capable ü
Escalating notification system sends temperature “out of range” alerts via email, text message, voice call, or fax ü
CompX NationalPO Box 200Mauldin, SC 29662864.297.6655 phone
CompX Timberline715 Center StreetGrayslake, IL 60030847.752.2600 phone
Registered to:ISO 9001:2000
Certificate: A2695, A10010
Reorder #: F2644-012Copyright 2017 © CompX Security ProductsCompX eLock and Lockview are Registered Trademarks of CompX International
Custom eLock OEM applications available.For more information about OEM options,
call 864.752.2500 or visit compx.com
WS-PRKP-TEMP-V (200/300 SERIES) WS-PRKP-CAB (200/300 SERIES) 150-PRKP-FRG-V (150 SERIES) 150-ICKP-CAB (150 SERIES)
See compxelock.com for more information