Post on 30-Dec-2015
COMPUTER SCIENCE PROJECT WORK FOR III UNIT TEST
2
MADE BY: AMIT KUMAR BHIM KUMAR CHITRANJANGUIDED BY: MR. LOKESH SAINI
3
History Of Computing
Computer Hardware
4
Computer Development
Computer architecture
Overview
5
Introduction Computer is arguably the most important tool
in the areas of engineering, science, business etc. etc.
Data acquisition and analysis Simulation Embedded applications
Process control Condition monitoring and fault diagnosis systems Automatic testing equipment Robotics Telecommunications
Productivity software (word processing, spreadsheets, databases, presentation) etc……………
6
Computer development The Abacus- Babylonia-4th century B.C.
The Difference Engine- Charles Babbage 1822 Vacuum tube - John Ambrose Fleming 1904
The ENIAC (Electronic Numerical Integrator and Computer)-1945 Used 17,478 vacuum tubes Too late for WW-II, but was used in the cold war to perform
calculations to build a hydrogen bomb
7
City of Philadelphia reportedly experienced brown-outs when ENIAC drew power at its home at the the University of Pennsylvania (http://www.pbs.org/wgbh/aso/databank/entries/dt45en.html)
Was not a general purpose computer: programming meant rewiring with punch cards and switches
One of ENIAC's greatest feats was in showing the potential of what could be accomplished in the future
Transistor - Nobel prize in physics in 1956
8
Integrated Circuit (chip) - Jack Kilby 1958 (Nobel prize in physics in 2000)
First commercially available IC’s developed by Texas Instruments and Fairchild semiconductor corp.
Generations of IC’s: Small scale integration - 1965
Up to 100 devices on a chip Medium scale integration - to 1971
100-3,000 devices on a chip Large scale integration - 1971-1977
3,000 - 100,000 devices on a chip Very large scale integration - 1978 to date
100,000 - 100,000,000 devices on a chip
Ultra large scale integration Over 100,000,000 devices on a chip
Apple I computer (1976)
9
Moore’s Law: Number of transistors on a chip will double every 18 months.
10
Computer Architecture
Main Memory
InputOutput
SystemsInterconnection
CentralProcessing
Unit
11
Components of a Computer System
central processing unit
Storage(External memory)
input/output Main Memory(RAM)
12
Computer Components
13
Component description
Central Processing Unit (CPU) or microprocessor, controls the operation of the computer and performs its data processing functions
Main memory - also called internal memory stores instructions and data. Memory is partitioned into separate instruction and data spaces
Input/output (I/O) – moves data between the computer and its external environment
System interconnection – some mechanism that provides for communications among the CPU, the main memory, and the I/O devices
14
Structure of the CPU
control unit
registers
flagscachememory
ALUinput/output
storage
memory
registers
15
Components of the CPU Arithmetic and Logic Unit (ALU): processes the
data in the registers according to instructions issued by the control unit. Performs arithmetic (addition, subtraction, etc..) and logical (comparison) operations
Registers: provides temporary storage for data and instructions. It handles instructions and data at 10 times the speed of cache memory. Registers facilitate the movement of data and instructions between RAM, the control unit and the ALU
Control unit registers: The instruction register contains the current instruction
being executed The program register (instruction pointer) contains the RAM
address of the next instruction to be executed ALU registers
The accumulator register stores the result of ALU operations
16
Internal CPU interconnection: some mechanism that provides for communication among the control unit, ALU, and registers
Control Unit: controls the operation of the CPU and hence the computer. Interprets instructions, moves data to/from memory and registers, instructs ALU to perform certain operations, increments instruction pointer, etc. During program execution, instructions in a program are moved from the RAM into the control unit, where it is decoded and interpreted by the decoder
Flags: 1-bit memory, or 1-bit registers and hold information on what has recently happened in the CPU. These are set to 1 or 0 depending on the results of internal operations such as results of ALU operations (zero or negative result) or external operations such as interrupts (commands that tell the processor to stop execution and wait for further instruction)
17
Cache Memory: Small fast memory that improves CPU’s efficiency. Increases computer throughput, and is a high-speed holding area for program instructions and data. It holds only instructions and data that are likely to be needed by the CPU. While programs are running on the computer, the same data or instructions might be needed frequently. In such cases, the processor first checks the cache memory for the data or instructions, thereby reducing the need for frequent access to the RAM and speeding up the processing
18
Microprocessor System Buses
Microprocessor(CPU)
RAM ROM
Input/Output(I/O)
Control Bus
Data Bus
Address Bus
19
System Buses
A BUS is an internal communications path consisting of a number of lines connecting the system components
Control bus –The control bus synchronizes system events like memory access, system interrupts, I/O, etc.
Address bus – Source and destination addresses are sent over the address bus to identify a particular location in memory or input/output port.
Data bus – two way path for transferring data and instructions in and out of the microprocessor
20
Main Memory
A collection of cells Each cell has an address and a value Random Access Memory (RAM) Cells can be accessed randomly Ram is volatile All data stored in binary format Bit, byte and word are the unit of data
21
Main Memory RAM – Random Access Memory. Temporary read/write
memory. Applications are typically loaded into RAM during computer use. Types of RAM include:
SRAM (static) , DRAM (dynamic ), EDO RAM (extended data out) , SDRAM (synchronous dynamic-most new PC’s are equipped with this RAM which is able to synchronize itself with the processor, enabling data transfer at more than twice the speed of previous RAM technologies)
SRAM is called static because the memory retains its contents as long as power is supplied-It does not have to be periodically refreshed as in DRAM. It is faster than DRAM (The contents of the memory can be read much faster), however is more expensive and is larger in size
DRAM is called Dynamic RAM because the memory content needs to be refreshed periodically (every few milliseconds) due to leakage of electrical charge. It is slower than SRAM, but cheaper and smaller in size
22
CPU-Memory Interaction
0 LDA 14
1 ADD 15
2 STA 14
3 HLT
…. ……
14 10
15 7
14 17
15 7
Assume a is stored in 14and b is stored in 15
a= a + b
Result
Program
Fetch-execute cycle
23
ROM – Read Only Memory. ROM can typically be written once, but read many times. It is used to store BIOS (Basic Input/Output System-helps to load and locate an operating system), external to microprocessor, and computer instruction sets, internal to microprocessor
The contents of the ROM are hard wired by the manufacturer in a typical ROM chip. When you turn the computer on, ROM automatically prepares the computer system and loads the initial display screen prompt
A variation of ROM is PROM (Programmable Read Only Memory), in which the user can load programs and data that are read only. This can be done with device called a PROM programmer. Writing to a PROM destroys the internal links, so a basic PROM can only be programmed once
24
EPROMs (Erasable Programmable Read Only Memory) is a variation of PROM, and is rewritable. It can be erased by exposing the chip to ultraviolet light. It can then be programmed with an EPROM programmer
Flash memory is a type of PROM that can be easily altered by the user. They are also called EEPROMs (Electrically Erasable Read Only Memory) because they can be electrically erased then written on to (flashed) without having to take them out of the computer, and without using ultraviolet light.
Since RAM can be read faster than most ROMs, the frequently used content of the ROM is sometimes copied to RAM (shadowed)
25
Secondary Storage
Magnetic disk Hard disk (File, Directory, Folder) Floppy disks Zip disks
Optical media CD (680 MB) DVD (4.7 GB) Magneto-optical disks (Pinnacle drives)
Magnetic tape (used primarily for long term archive)
26
Hard Disk Drive Basics
27
Input/Output
Some Input Devices Keyboard Keypad Mouse Voice activation Touch screen Digitizers and pen-based (stylus)
systems
28
Some Output Devices
Monitor Printer Speakers Communication (comm) ports Modems (both input and output) Network interface cards (both input and
output)
29
Input and Output Devices and Systems
30
Storage System Issues Historical Context of Storage and I/O Secondary and Tertiary Storage Devices Storage I/O Performance Measures Queuing Theory Processor Interface Issues I/O Buses Redundant Arrays of Inexpensive Disks (RAID) File Systems I/O Benchmarks File System Performance
IT Fundamentals 31
Input device is a tool used to capture information and commands
Examples include: Keyboard Point-of-sale (POS) Microphone Mouse Pointing stick Touch pad Touch screen Bar code reader Optical mark recognition (OMR) Scanner
IT Fundamentals 32
Types of input Types of input
IT Fundamentals 33
Input DevicesInput Devices
Most obvious = human + KEYBOARD
Machines make better input devices….
DIRECT ENTRY, or SOURCE DATA AUTOMATION.
Need to be: Accurate, reliable and easy to
use, fast
Human and keyboard is the most used input device
IT Fundamentals 34
Examples of Direct Entry Input DevicesExamples of Direct Entry Input Devices
MICR : Used with cheques OMR : Tattslotto & TAB OCR : Scan type-written pages….
Scanners
IT Fundamentals 35
Examples of Direct Entry Input DevicesExamples of Direct Entry Input Devices
Barcode Readers:
Sit-in-the-Counter type - Reads standard or customised barcodes
IT Fundamentals 36
Input TypesInput Types
a.
Data Collection Devices:
Web Cams Video camera whose output displays on a web page
Digital Camera
IT Fundamentals 37
Other Input DevicesOther Input Devices
a.
Sensors
Pointing Devices
Mouse
measures x-y moveent plus whether button is pressed down…
IT Fundamentals 38
Other Input DevicesOther Input Devices
TouchPadPointing StickLight Pen
Trackball
- Similar to mouse
Joystick- games?- Difficult to pinpoint a position
Touch screensscreen 'divided' into areasarea selected by toucheasy to usecannot have areas too smallscreens get dirty (many uses)
IT Fundamentals 39
Voice InputVoice Input
Voice Input
IT Fundamentals 40
OutputOutput
Four common type of output are text, graphics, audio and video.
IT Fundamentals 41
OutputOutput
Output Devices
Digital signals from computer are converted into human readable form.
Hard Copy
Soft Copy
IT Fundamentals 42
OutputOutput
Printers
Impact printers
Dot Matrix:
IT Fundamentals 43
OutputOutput
Non-impact printers - no physical contact between paper and printing device- 3 technologies used:
ink jet -
thermal - special paper - expensive to run - up to photographic quality…
IT Fundamentals 44
OutputOutput
Laser
- need enough memory to hold an entire page - 600 to 2400 dpi and greater- operates similar to a photocopy machine…
IT Fundamentals 45
OutputOutput
CRT Monitors
•Raster scan technology
•An electron beam moves back and forward across the back of the screen
•This causes dots on the front of the screen to glow, producing an image
•Available in various sizes 15 – 22 inches
•Flat and curved screens
Resolution
•CRT monitors ( 1280 X 1024 pixels)
•High end CRT monitors (2048 X 1536 pixels)….
IT Fundamentals 46
OutputOutput
IT Fundamentals 47
OutputOutput
LCD Monitors
•An electric current passes through the crystals causing them to twist, block light waves and create an image.
Gas Plasma Monitors
Very high quality (1080p)….
•Larger screens
IT Fundamentals 48
Other Output DevicesOther Output Devices
Data Projectors
IT Fundamentals 49
Other Output DevicesOther Output Devices
Fax Machine
•Transmits and receives documents over the telephone line
IT Fundamentals 50
Other Output DevicesOther Output Devices
Multifunction devices
•Printer, scanner, copy machine and fax machine all in one
51
SECONDARY STORAGESECONDARY STORAGE
Control Unit works on programs/data in RAMPOWER OFF ... RAM OFFBye Bye AssignmentHowever blocks of memory can be saved/read on secondary storage.
52
Secondary Storage Media and DevicesFloppy DisksHard DisksTape and Tape driveCartridge tapeCD-ROM/DVD/BluRayMagnetic-Optical drivePC CardsSmart Cards USB Drives
SECONDARY STORAGESECONDARY STORAGE
53
Size Type Tracks Sectors CapacityIBM:3½ DD 80 9 720KB3½ HD 80 18 1.44MB
Macintosh3½ HD 1.4MB
FLOPPY DISKS:FLOPPY DISKS:
eg. for a 3½ disk (high density):
• 3 1/2-inch diskette• Circular piece of plastic• Made up of tracks & sectors• 512 bytes in each sector
54
• Made up of platters, cylinders and sectors• Rotation speed 7200 rpm• head 'floats' on surface• bad sectors & head crash
HARD DISKSHARD DISKS
55
OPTICAL STORAGE TECHNOLOGY• CD-ROM (compact disk read-only memory)- 650 MB of information• DVD (digital video disk) - 4.7 gigabytes• CD-R (compact disk-recordable)• CD-RW (compact disk-rewritable)• Magneto-optical (MO) – combines magnetic/optical technology by changing polarity of spot (1 to 0 etc.)
Hard Disk Vs Floppy Disk
56
•Compact Disk Read Only Memory
•high capacity is ideal for storage of the very large sound, graphics and video files
• when recording data, laser light burns pits on CD
• when reading data, pits will not reflect light (binary bit 0) but lands will reflect light (binary bit 1)
CDROM
57
Other Storage Devices
TapeTape
•Thin ribbon of plastic• Sequential storage – mainly for backup•Used for longer term storage
USB Flash Drives
• plugs into a USB port•Small, lightweight•Storage 4 GB +•Great for mobile users
58
OTHER TYPES OF STORAGE DEVICESOTHER TYPES OF STORAGE DEVICES
PC cardsPC cards• Small, credit card-sized cards that fit into PC Card expansion slots •Used for storage, communications and additional memory.• Most often used with portable computers• Can store more than 300 MB of data
Smart Cards• Credit card-sized devices that contain a microprocessor• Microprocessor can store up to 8,000 bytes of information.• Examples of uses - prepaid telephone card, employee time card