COMPOSITE BRAKE SHOE FOR RAIL VEHICLES TYPE K

CHARACTERISTIC

Composite brake shoe type K for freight cars, up to the maximal speeds of 120 km/h, locomotives and passenger cars up to speed of 160 km/h. It is made of asbestos-free, moulded friction material. It contains resins, elastomers, friction modifiers and mineral fibres reinforcing its structure.

The wear of this material is very low. The advantage of this material is a stable coefficient of friction in variable atmospheric conditions and high thermal resistance. FR513 meets the requirements of Code UIC 541-4 and TSI WAG. The freight cars equipped with FR513 brake shoes fulfill the requirements of TSI NOISE.

DESIGNATION OF FRICTION MATERIAL

FR501

FR503

FR507

FR513

FR515

APPLICATION

Composite brake shoe type K.

• homologation UIC 541-4 for freight cars • new freight cars adapted to brake shoes type K • locomoives • freight cars in internal traffic • passenger cars with equipped with block brakes • electrical train units equipped with block brakes • special rail vehicles

HOMOLOGATION International Union of Railways UIC 541-4 DIAMENSIONS

DIAMENSIONS Handle Number FP

A B C D E F M N P R1 R2 R3 Type

320 80 60 160 220 37 - - 1:40 560 450 550 H F9039

250 80 50 - 180 37 156 78 1:40 560 - 420 H F9058 320 80 60 200 220 37 - - 1:40 560 425 500 H F9059 400 80 60 200 220 37 - - 1:40 560 425 500 H F9149 400 80 60 200 220 37 - - 1:20 560 660 600 H F9172 244 90 63 80 146 37 - - 1:20 544 200 250 H F9176 266 90 70 86 170 37 - - 1:20 718 250 900 H F9177 320 80 60 - 220 37 - - 1:40 560 - 365 H F9182 320 80 60 200 220 37 - - 1:40 560 420 500 H F9187 250 90 50 - 182 37 157 78 1:20 560 - 600 H F9218 313 90 50 - 257 30 - - - 482.5 - - J F9219 250 80 60 160 180 37 - - 1:40 560 450 480 H F9223 320 80 60 200 220 37 - - 1:40 560 450 550 H F9224 350 80 60 220 220 37 - - 1:40 560 450 520 H F9225 400 80 60 200 220 37 - - 1:20 560 450 550 H F9227 250 80 60 170 180 37 157 78 1:40 560 450 550 H F9261 320 80 60 170 220 37 157 78 1:40 560 450 550 H F9262 400 80 42 - 220 37 - - 1:20 560 - 355 H F9267 260 78 32 - 170 27 - - - 350 - 317 H F9322

320 90 60 160 220 37 157 78 1:40 560 350 620 H F9381 311 84 42 - 210 36 - - - 451 - 470 U F9403 320 80 60 - 220 37 - - 1:20 560 - 460 H F9416 320 90 50 - 260 37 - - - 450 - - H F9418 320 80 58 - 230 30 - - 1:20 425 - 500 H F9423 346 86 60 - 274 30 - - - 530 - 480 U F9425 320 80 50 200 220 37 - 78 1:40 560 425 500 H F9431 244 90 62 80 146 37 - - 1:20 544 200 250 H F9451 250 80 60 - 180 37 157 78 1:40 560 - 580 H F9455 250 80 60 170 180 37 157 78 1:40 560 450 550 H F9457 320 80 60 170 220 37 157 78 1:40 560 450 550 H F9458 320 80 40 - 220 37 - - 1:40 560 - 365 H F9475 320 80 50 200 220 37 157 78 1:40 560 450 550 H F9501 320 80 58 - 220 30 - - 1:20 560 - 505 H F9506 320 80 60 170 220 37 157 78 1:40 560 450 550 H F9532 311 80 55 - 282 38 - - 1:10 480 - 425 H F9536 320 80 60 170 220 37 - - 1:40 560 450 550 H F9541 311 80 55 - 282 38 - - 1:10 480 - 482.5 H F9549

Other dimenstions are available on request.

BULGARIAREMTECHSTROY GROUPTel: +359 52 319980

Europe

Fax: +359 52 319990web: www.remtechstroy.eu

Disc brake pads

CHARACTERISTIC

Disc brake pads for pneumatic and hydraulic brake systems of tram-cars and light rail vehicles. It is made of asbestos-free, moulded friction material. It contains synthetic elastomers, thermo-setting resins, friction modifiers as well as mineral and organic fibres reinforcing the structure.

It does not show aggressiveness to the anti-friction material and ensures quiet braking without sparking. A stable coefficient of friction and low wear level even for high loads and unit pressures.

DESIGNATION OF FRICTION MATEIRAL

FR138

FR154

FR167 APPLICATION Tramways types:

• 116N (Konostal) • 120N (Pesa) • 121N (Pesa) • 122N (Pesa) • E1 (Bombardier) • GT6 (Düwag) • GT8 (Düwag) • N8S-NF (Man) • N8C-NF (Düwag / Modertrans) • Cityrunner (Bombardier) • G3 (Beijnes)

DIAMENSION

BULGARIAREMTECHSTROY GROUPTel: +359 52 319980

Europe

Fax: +359 52 319990web: www.remtechstroy.eu

LINING FOR DRUM BRAKE

CHARACTERISTIC

Brake liner for pneumatic and hydraulic drum brake systems of tram-cars and light rail vehicles. It is made of asbestos-free, moulded friction material. It contains synthetic elastomers, thermo-setting resins, friction modifiers as well as mineral and organic fibres reinforcing the structure.

It does not show aggressiveness to the anti-friction material and ensures quiet braking without sparking. A stable coefficient of friction and low wear level even for high loads and unit pressures.

DESIGNATION OF FRICTION MATERIAL

FR106

APPLICATION Tramways types:

� 13N (Konstal) � 105Na (Konstal) � 805Na (Konstal) � 111N (Konstal) � 112N (Konstal) � 114Na (Konstal) � 204 WrAs (Protram) � 205 WrAs (Protram) � KT4DtM (CKD / Siemens) � T6A2D (CKD)

PARAMETERS Diamension Number FP

a b R 8 5 140 F1092 8,5 5,4 139,5 F1099 9 6 139 F1093 10 7 138 F1094 10,5 7,5 137,5 F1107 12 9 136 F1095

BULGARIAREMTECHSTROY GROUPTel: +359 52 319980

Europe

Fax: +359 52 319990web: www.remtechstroy.eu

Centre pivot liner

CHARACTERISTIC

Centre pivot liner made of an asbestos-free, oil-proof, moulded friction material, made on the basis of synthetic elastomers and thermo-setting resins reinforced with non-organic fibres with addition of friction modifiers.

It meets the requirements of UIC 510-1. It is characterized by high mechanical strength.

DESIGNATION OF FRICTION MATERIAL

FR105

APPLICATION

Sliding elements applied in freight car bogies.

• meet the requirements of UIC510-1 • two-axle bogies for freight wagons types Y25, 1XT, 1XTa, WAP, others • freight car bogies with repair liners - the replacement of oil lubrication

PARAMETERS

Type Number

FP

Y25 F9017 105

Type Number FP

Y25, 1XT, 1XTa, WAP and others F9321 105

Type Number FP

Y25, 1XT F9398

Typ Numer FP

1XTa, WAP and others F9480

Typ Numer FP

102N i 105N F9382

HOMOLOGATION UTK (Office for Railway Transport)

BULGARIAREMTECHSTROY GROUPTel: +359 52 319980

Europe

Fax: +359 52 319990web: www.remtechstroy.eu