Post on 23-Sep-2020
1-11-17
Gorilla Machinery P.O. Box 2579 Springfield OH 45505
Compaction Table
Manufacturer -GK Code: GOR300 Price $55,000 Certified Rating
Has been cleaned and painted New controls with VFDs Smart relay with timers
4-force output settings Can be configured to operate at any capacity as low as 1,000 lbs. up to 40,000 lbs. 9'6'' Wide x 8'8'' Long x 52" Tall
Model Number: HDCT120-10 Serial Number: C8298-1 Capacity: 40,000 lbs. Manuals: None Time to Ship: 1-2 weeks
click to see more
1-11-17
Mobile Mixer Manufacturer - IMF Code: GOR301 Price: Contact us for more information info@gorillamachinery.com Certified Rating
Set up for furan Three sand choices: New, blended, all
reclaimed
Mixer is mobile, so sand bins and two dust collectors are integral Boom contains two sections with approximately 20 ft. reach Capacity 1,500 lbs./min
click to see more
1-11-17
Powder Feeder
Manufacturer: Accurate
Code: GOR302
Price: $4,000
Certified Rating
Accurate Powder Feeder
Includes Controls
click to see more
1-11-17
Powder Feeder
Manufacturer: Accurate
Code: GOR303
Price: $4,000
Certified Rating
Accurate Powder Feeder
Stainless Steel feeder with hopper
120 Volt
Built In Controls
click to see more
1-11-17
Batch Mixer
Manufacturer - OMCO Code: GOR304 Price $2,000 Certified Rating
Complete machine
Price listed where is/as is Testing and rework available at extra cost
Model Number: N/A Capacity: 200 lbs. Manuals: None Time to Ship: 1 week
click to see more
1-11-17
Stationary Electric Aluminum Melting Furnace
Manufacturer- Dynarad Code: GOR307 Price: Contact us for more information info@gorillamachinery.com Certified Rating
900 lb capacity includes control panel - contractor type New in 1993 - good condition - was operating
when removed from service. All elements are included. Includes complete drawings and manuals price
as is where is
Cleveland Location
click to see more
1-11-17
Electric Aluminum Melting Furnace Manufacturer- Gasmac Code: GOR308 Price $7,500 Certified Rating
click to see more
1-11-17
Gas Melting Furnace Manufacturer - (Brand Not Listed) Code: GOR309 Price $7,500 Certified Rating
click to see more
1-11-17
Gas Melting Furnace
Manufacturer - (Brand Not Listed) Code: GOR310 Price $7,500 Certified Rating
click to see more
1-11-17
Boiler Manufacturer - Burnham Code: GOR311 Price $950 Certified Rating
Natural gas Palmer Part: #008981 New in shipping box
Model Number: 203 Capacity: 52,000 BTU Voltage: 120 V Manuals: Yes Time to Ship: 1-2 weeks
click to see more
1-11-17
Pumps Manufacturer - Ingersoll-Dresser Code: GOR312 Price $500 Each Certified Rating
Hot oil jacketed Serial Number: 0697-1070-A & B Capacity: 7.5 HP
click to see more
1-11-17
Mold Handler Manufacturer - Donavan Code: GMMHS0002 Price $14,500 Certified Rating
Minimum opening: 36" Maximum opening: 59" Hydraulically Powered Reworked Capacity: 3,000 lbs.
click to see more
Click here for video: GMMHS0002
1-11-17
Mold Handler
Manufacturer - Donavan Code: GOR314 Price $11,500 Certified Rating
click to see more
1-11-17
Sand Heater Manufacturer - Dependable Code: GOR317 Price $4,000 Certified Rating
Where is/as is
With starter based control panel
Capacity: 500 lbs./min
click to see more
1-11-17
Vertical Elevator Manufacturer - Olds Code: GOR319 Price: Contact us for more information info@gorillamachinery.com Certified Rating
6" Diameter Casing 12' Discharge Height Approximately 3 ft.2 footprint Two thrust bearings with standard seals Carbon steel screw and intake scoops Quiet with few moving parts
Capacity: Up to 15 TPH Voltage: 480 V/3 phase Time to Ship: 1-2 weeks
click to see more
1-11-17
Belt Sander (Wet or Dry)
Manufacturer – White-Sunstrand Code: GOR320 Price $800 Certified Rating
Can be used with included water flood systems or dry Ideal for ferrous or non-ferrous
Model Number: CAT CSE040805SQD13 Capacity: 9" Manuals: None Time to Ship: 1-2 days
click to see more
1-11-17
Like New Vertical Band Saw
Manufacturer – Roll-In Code: GOR321 Price $1,500 Certified Rating
Like new Counterweight style feed
Model Number: EF-1495 Serial Number: 05171EF Capacity: 12" Manuals: Yes Time to Ship: 1-2 days
click to see more
1-11-17
Plate Lifting Clamps Manufacturer – (Brand Not Listed) Code: GOR323 Price $1,500 - $750 Each Certified Rating
For plate thickness 0-2 1/8" Lifting eye opening 4" diameter Two (2) available Capacity: 8,000 lbs
click to see more
1-11-17
Air Canon
Manufacturer: Clansman Dynamics
Code: GMSRE0018
Price: $25,000
Certified Rating
click to see more
Click here to view a video of the product
1-11-17
22G Mullor
Manufacturer: Simpson
Code: GOR327
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Includes Spare Parts
Includes 4 Gearboxes (2 are good)
Model E-8002015
click to see more
1-11-17
Cooling Tower
Manufacturer: BAC
Code: GOR328
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Serial # 97615581
Model # FXV-643
click to see more
1-11-17
Set of Water Pumps
Manufacturer: PACO
Code: GOR329
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Serial # 46296
Model # 15 HP
click to see more
1-11-17
Fluid Bed Cooler
Manufacturer: Carrier
Code: GOR330
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Serial # 22463
Model # QAC 3'-0 -24'-0"
click to see more
1-11-17
Pin Lifts (2)
Manufacturer: Osborn
Code: GOR331
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Serial # 18841-C
Serial # 18841-O
Model # 722RJW-A
click to see more
1-11-17
Roto Lift
Manufacturer: Osborn
Code: GOR332
Price: Contact us for more information info@gorillamachinery.com
Certified Rating
Serial # 18051-0
Model# 3191
click to see more
1-11-17
BUCKET ELEVATOR
Manufacturer: Universal
Code: GOR333
Price: $7,500
Certified Rating
7 TPH
20' Discharge Height
1/2 HP Motor
Low Hours
Like New Condition
Polyethylene Buckets
Controls Not Included
click to see more
1-11-17
Sand Heater – Castec
Item: GOR334
Price: $9,000
300 Pound/Minute
480V/3Ph/60Hz
As Is, Where Is
1-11-17
Sand Heater – Castec
Item: GOR335
Price: $11,000
500 Pound/Minute
480V/3Ph/60Hz
As Is, Where Is
1-11-17
Rollover Machine
Manufacturer: Cleveland
Code: GOR336
Price: $35,000
1000 Pound Capacity
Perpendicular Conveyors
1-11-17
18 Bechtle Avenue
Springfield, OH 45504
NEW Core Storage Rack
(4 Shelf Design, 14” Spacing)
(5 Shelf Design, 10 ½” Spacing)
(7 Shelf Design, 7” Spacing) ITEM: GMT0003
Price: In Stock Discount - List less 5%
Certified Rating
Tilting shelves lift up and out of the way for ergonomic loading and unloading Eliminates typical "dead" areas of rack as all shelves are easily accessible Fingertip force required to lift shelves Reinforced base is designed for fork truck handling Adjustable shelf height ideal for varying core production in today's typical jobbing foundry Large casters for ease of movement Locking bar prevents accidental dropping of shelves
Web Link: http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMT0003.htm
Web Link: http://www.palmermfg.com/bulk_storage_handling/core_rack.htm
1-11-17
NEW KP-5 Bucket Top Coating System
Item: GMMCC0001
Price: In Stock Discount -List less 5%
Certified Rating
Air operated, infinitely variable, double diaphragm pump Complete air filter / lubricator / flow control system 1-HP air motor for material agitation Stainless steel propellers and shaft Easily portable, heavy-duty, two-wheel cart with hose "Quick-Flush" cleaning system Adjustable volume spray gun
Web Link: http://www.palmerusedequipment.com/mold_core_coating/GMMCC0001.htm
Web Link: http://www.palmermfg.com/mold_core_coating/kp-5_spray_system.htm
1-11-17
NEW V-200-I Compaction Table ITEM: GMCPT0001
Price: In Stock Discount – List Less 5%
Certified Rating
For cores and molds from 5-200 lbs. Rugged - Heavy-duty construction High frequency vertical vibration Adjustable duration timer - .1 to 10 seconds Adjustable force "Hands free” actuation Precision-ground top plate Can also be used to remove hard-to-draw cores
Web Link: http://www.palmerusedequipment.com/core_room_equipment/GMCPT0001.htm
Web Link: http://www.palmermfg.com/compaction_tables/core_table_v-200.htm
Ideal for small cores and molds. Great for plaques and high tolerance cores. We have two new units available.
1-11-17
New Palmer / Olds Elevator
Item: SRE0010
Price: In Stock Discount – List less 5%
Certified Rating
6 inch Diameter Casing 12 foot Discharge height 480 Volt, 3 Phase Motor Approximately 3’ Square Footprint Up to 15 TPH of sand Two Thrust Bearings with Standard Seals Carbon Steel Screw and Intake Scoops Quiet • Few Moving Parts Ships 1-2 weeks
Web Link: http://www.palmerusedequipment.com/sand_reclaimation_equipment/SRE0010.htm
Web Link: http://www.palmermfg.com/bulk_storage_handling/vertical_sand_conveyors.htm
1-11-17
NEW SDAM-3 Shakeout Deck / Attrition Mill
Item: SRE0008
Price: In Stock Discount – List less 5%
Certified Rating
Never Used Ships 1-2 weeks 5% In-Stock Discount Available
Web Link: http://www.palmermfg.com/shakeout_reclaimation_knockout/sdam.htm
Web Link: http://www.palmerusedequipment.com/sand_reclaimation_equipment/SRE0008.htm
1-11-17
NEW SDAM-4 Shakeout Deck / Attrition Mill
Item: SRE0009
Price: In Stock Discount – List less 5%
Certified Rating
Never Used Ships 1-2 weeks 5% In-Stock Discount available
Web link: http://www.palmerusedequipment.com/sand_reclaimation_equipment/SRE0009.htm
Web Link: http://www.palmermfg.com/shakeout_reclamation_knockout/sdam.htm
1-11-17
Aluminum Degassing System
Item: MRE0004
Price: In Stock Discount – List less 5%
Certified Rating
Used only for trials, this small, easy-to-operate aluminum degasser is ideal for small foundries or foundries with many crucible type furnaces that need service. This unit is easily picked up by hand or by hoist. Can effectively cut degas times from 1/2 hour to minutes. Unique lance design greatly reduces replacement cost.
Web Link: http://www.palmerusedequipment.com/melting_room_equipment/MRE0004.htm
Web Link: http://www.palmermfg.com/melt_shop/portable_alum_degasser.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Alum-A-Filter Automatic Filtration Machine Item: MRE0007 PRICE: In Stock Discount – List less 5% Certified Rating
Do you need to filter aluminum in advance of permanent mold or greensand? Our Alum-A-Filter may help.
Web Link: http://www.palmerusedequipment.com/melting_room_equipment/MRE0007.htm
Web Link: http://www.palmermfg.com/melt_shop/alum-a-filter_nonferrous_filtration.htm
1-11-17
Shuttle Car
ITEM: GMMFT0011
Price: $8,000
Certified Rating
Shuttle Car
All Components Included
Web Link: http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMMFT0011.htm
Web Link: http://www.palmermfg.com/no-bake_molding/transfer_cars.htm
Capacity: 5 ft.3
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
1-11-17
Stretch Wrap Machine
ITEM: GMMCH0001
PRICE: $32,000
Certified Rating
Features: 12 RPM (17 RPM and 22 RPM optional) 3-year unlimited cycle warranty Spring loaded gate AC drive for all motors except conveyors Quick disconnects throughout Recent Improvements: Standard wrap height - Increased to 80" Optional wrap height is now available in 92", 104" and 116" Ergonomically friendly film loading carriage is mounted on the side and allows for easy loading Lifetime warranty on pre-stretch rollers' blue compound "Analog" sensor is standard Optional close roller spacing (3" centers) on conveyors is rated at 4000 lbs. Controls ready for the integration of fence kit Standardization of line with the smart tower and carriage inventory Improved design with enclosed carriage chains
Web Link:http://www.palmerusedequipment.com/miscellaneous_foundry_equipment/GMMCH0001.htm
Model Number: WCA-200
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
M500 Articulated High Speed Sand Mixer
ITEM: GMCSM0017
PRICE: $50,930
Certified Rating
Complete with pumps and controls For either 2 part furan acid or PUNB 3 part Will accept any size Palmer mixing chamber up to 3,000 lbs./min. Come with either 500 or 1,000 lbs./min. mixing chamber Power feeder not included - Available at extra cost Assembled and Operating for Small fee
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/GMCSM0017.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m500xld.htm
Model Number: M500 Capacity 500 or 1,000 lbs./min. Voltage: 240/480 V/3 phase/60 Hz Manuals: Yes Time to Ship: 3-4 weeks
Click here to see PDF of drawing 1.
Click here to see PDF of drawing 2.
1-11-17
M500 Articulated High Speed Sand Mixer - Continued
ITEM: GMCSM0017
Articulated High Speed Sand Mixer
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
M50XLD High Speed Continuous Mixer
Serial # M1648XL
ITEM: PMS317
PRICE: $13,820
Certified Rating
4 Resin and Catalyst Output Levels Calibration Timer with Remote Start/Stop Buttons & Selector Switches Recirculating Pumps Dual Sand Slidegates Remote Pumps Third Part Pump Reworked and In Running Condition
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/PMS317.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m50xld.htm
1-11-17
H100 Electric Sand Heater
Item: TPC0005
Price: $1,750
Certified Rating
Pass thru style No summer by-pass
Web Link: http://www.palmerusedequipment.com/sand_heaters_coolers/TPC0005.htm
Web Link: http://www.palmermfg.com/sand_conditioning/section_electric_sand_heaters.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
1-11-17
MK300XL – Serial # M337
Item: PMS307
Price: $28,440
Certified Rating
2-Part Resin System Can be Converted – 3-Part System Available Under Motor Swivel 200-600 Pounds Per Minute
Web Link: http://www.palmerusedequipment.com/mixers_pumping_systems/PMS307.htm
Web Link: http://www.palmermfg.com/mixers/sandmixer_m300xld.htm
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases.
1-11-17
USED KP-5 BUCKET TOP COATING SYSTEM (S/N KP126)
Item: PMS323
Price: $1,910
Air Operated, Infinitely Variable, Double Diaphragm pump
1 Hp air motor for material agitation
Stainless steel propellers and shaft
Adjustable volume spray gun
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used M50XLD High Speed Continuous Mixer (S/N
M1642XLD)
ITEM: PMS324
PRICE: $ 19,000
Complete with pumps and controls 2 Part Pump System 480Volt/3Ph/60Hz 4 Resin and Catalyst Output levels Calibration Timer with Remote Start/Stop Buttons & Selector Switches Recirculating Pumps Dual Sand Blend Split Hopper Hopper Support Stand In Running Condition
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Bucket Elevator
Item: PMS327
Price: $13,600
16 TPH
480V/3Ph/60Hz
20’ Discharge Height
High Temp – Maximum Temperature 300°
Serial # CF572
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Magnetic Separator
Item: PMS329
Price: $15,000
Up to 20 TPH Sand at 100 PCF
11 Guage 304 Stainless Steel Construction, 22” x 18” x 27-1/8” Tall Flange to Flange
Heavy Duty Predrilled 2” x 2” x 1/4" Carbon Steel Angle Flanges
Samarium Cobalt Permanent Magnet Material
Rotating Drum is 12” Diameter x 12” Wide
Adjustable Feed Gate for Product Flow
Inlet has fixed diverter to direct product flow over magnet area
Outlet has splitter for ferrous and non-ferrous product discharge
230/460 Volt/3 Phase, 1/2 Hp motor and reducer for 45 RPM continuous operation
Position of magnet adjustable for optimum separation
Continuous Cleaning Discharges Ferrous Contaminants Separate from Product
Maximum Operating Temperature 572°F (300°C)
Low Hours
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used RP-2 Flowboss Resin Monitoring with PID
(S/N PS2409)
Item: PMS332
Price: $25,000
Recirculating I, II, and III
Four Recipes
By-Pass around Flow Meter
Filter System with 100 Mesh Filter Baskets (Parts I, II Temperature Monitoring)
Additional Filter Housing and Basket for Part I
Replace Part III Filter with 37 Micron Screen
Part I Resin Heater
Flow Switch Heater
In Running Condition
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
MK1000XLD-2 Kit Mixer, and P-12 Powder Feeder
with 10 Cubic Foot Hopper–Palmer
Item: PMS333
Price: $25,000
Standard 30 Hp Motor
1000 Pounds Per Minute Mixing Capacity
Dual Resin Levels
Standard Voltage 480V/3 Ph/60 Hz
No Base Included
Remote Electrical and Pumping System Enclosures
In Running Condition
1-11-17
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
Used Pneumatic Sand Transporter (S/N PSL136)
Item: PMS325
Price: $9,000
20 Degrees to 400 Degrees Operating Range
10 Ton Per Hour
In Running Condition
No Controls –Controls can be built by Palmer but are not included
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases
1-11-17
CMCB50 Coremaker with M100XLD High Speed
Continuous Mixer
Item: PMS334
Price: $75,000
Certified Rating
Dual Sand Slidegates
Cold Box Adder
Third Part Prewire
Calibration Timer
P-5 Powder Feeder
Scrubber
Elevator and Hopper
1-11-17
1-11-17
All Palmer used equipment is sold “where is / as is”. We encourage you to make a personal inspection before purchasing used equipment. No warranties or guarantees come with any used equipment purchases