Post on 18-Jul-2016
description
CNC TURNING CENTER
CNC Turning Center
New Leader of Medium and Large Size CNC Turning Center
More Powerful For Higher ProductivitySpindle Construction with 130mm (5.12") cylindrical roller and double angular contact ball bearingRigid and reliable servo turret indexHigh accuracy and high rigidity machine SKT28 : 6,100kg(13,448lbs) SKT28L : 8,000kg(17,637lbs) SKT28LM : 8,100kg( 17,857lbs)
World Top Class QualityHYUNDAI-KIA Machine Tool
High Speed, High Accuracy, High Rigidity
CHUCK SIZE 254mm(10 ) [ 305mm(12 )]MAX TURNING LENGTH 720mm(28.3 ) MAX. SWING ON BED 590mm(23.2 )SPINDLE SPEED 3,000rpmSPINDLE MOTOR 22/18.5kW(30/25HP)
254mm(10 )1,070mm(42.1 )
590mm(23.2 )3,000rpm22/18.5kW(30/25HP)
254mm(10 )1,000mm(39.37 )
650mm(25.6 )3,500rpm22/18.5kW(30/25HP)
Speed & Power
The Splendid Double Speed Lathe in
The Next Generation CNC Lathe
High Rigid Box Type Bed Cast
60 degree slanted bed construction makes the turret locates at the heightof the operator’s eyes for easy andquick tool change, and an easy checkup for both sides of inserts.
Reduce Non-Cutting Time with Rapid Traverse of Z-axis,
24m/min (945 ipm)
High-performance AC servo motor and high-accuracy 3-pieces coupling construction.Powerful turret clamping force by hydraulic system.
- SKT 28/28L : 5,725kgf (12,621 lbf)
- SKT 28LM : 4,520kgf (9,967 lbf)
3 pieces turret coupling and servo motor provide steadyand quick turret indexing.
1 step 0.3 sec, Full (5 step) 0.8 sec
The constant power with wide range enables the machine does the heavy duty cutting withinoptimum condition at a low speed with a high power and a high torque.
SKT28/28L 74.4kgf.m (538 lb.ft ) SKT28M 64.7kgf.m (468 lb.ft)
CNC Turning Center SKT28/28L/28LM
SKT28/28L(FANUC 22/18.5kW)
SKT28LM(FANUC 22/18.5kW)
Accuracy
Spindle diameter and thickness are largerthan other machines
Spindle is supported with a combination ofdouble-row cylindrical roller bearing andangular contact ball bearings for accuracyand rigidity.
Wide RPM range main spindle has the minimalheat distortion, which allows machine does theconstant cutting accurately at the high speed.This machine wil l give you the excellentsurface roughness, along with a high accuracyand a minimum noise.
Direct connecting of ballscrew with servo motor to eachaxes provides the high precision.
One-piece cast construction greatly improves rigidity andaccuracy with high power and torque .
Each axis is designed with a large diameterballscrew, fixed by double anchor on both ends to provide high-rigidity and minimize thermal distortion.
CNC Turning Center SKT28/28L/28LM
0 24m/min (945 ipm) : 0.1sec (Z-Axis)High-productivity is accomplished by 0.1sec. superquick Acc/Dec on axis.
High rigidity Excellent damping
i
Compact design Easy to operateVersatile and powerful functions are provided
ConvenienceSuper Power! Rapid Speed! Easy Operation!
SKT28 Series
740kgf (1, 631 lbf) clampingprogrammable tail stock (option)
The front splash guard is sliding door type for easy and wideaccess to the inside of machine.
Chips fall directly into thechip box. The separatetype chip box can beeasily cleaned. A largeopening in the right side ofthe machine is providedfor easy chip discharge.
Q-setter can obtain tool offset automatically by touchingtool, this eliminates the trial cutting, measurements, andtool offset inputs.Even a beginner can finish tool compensation within 40seconds.
Work coordinate is automatically set by justinput the cut off depth on control panel as aparameter after slightly cutting the worksurface. Neither measuring nor calculating isneeded, and work coordinate can be setwithin 30 seconds.
CNC Turning Center SKT28/28L/28LM
Tooling System
fl20, 32
10 STATIONS
(fl 1 )34, 1
2
2
3
1
fl50 (2)
fl16, 20, 25, 32, 40(fl 1,1 1 1 )3
4, 34
14, 1
2,
VDI 4012 STATIONS
1
4
3
2
fl50 (2)
(1 SET)
25(1)
25(1)
25(1)
SKT28/28L
SKT28LM
Unit:mm(in)
Unit:mm(in)
Unit:mm(in)
SpecificationTooling Travel Range
SKT28LM
Axial Driven Tool Holder
Radial Driven Tool Holder
OD Tool
ID Tool
42 (1.65) 99(3.9)
1,020 STROKE(40.16)
690 (27.17) 120.5(4.74)
220
(8.6
6)
5 (0
.2)
190
(7.4
8)30
(1.1
8)( 1
.18)
42 (1.65) 1,020 STROKE(40.16)
184.5(7.26)
690 (27.17) 330 (12.99) 35(1.38)
220
(8.6
6)
192
(7.5
6)
( 1
.18) 3
(0.1
2)
28 (1.1
)
95 (
37.4
)
130
(5.1
2)
150
(5.9
1)70
(2.7
6) 220
(8.6
6)
1,020 STROKE(40.16)
330 (12.99)690 (27.17)
97(3.82)
120 (4.72)
QUILL
899.5 (35.41)
T/S STROKE
87.5(3.44)
132(5.2)
42(1.65)
35(1
.38)
25(0
.98)
45 (
1.77
)
( 1
.18)
1,020 STROKE(40.16)
330 (12.99)
42(1.65)
190
30(1
.18)
5 (0
.2)
145.5(5.73)
74(2.91)
75(2.95) 5
0(
1.9
7)
( 1
.18) 22
0 (8
.66)
690 (27.17)
CNC Turning Center SKT28/28L/28LM
Tool Interference Diagram
SKT28/28L SKT28LM
Unit:mm(in)Tooling Travel Range
SKT28/28L
OD Tool
ID Tool
A
B
C
D
E
SKT 28 SKT 28L
750(29.5) 1,100(43.3)
570(22.4) 920(36.2)
254(10) 254(10)
123(4.8) 123(4.8)
45(1.8) 45(1.8)
Unit:mm(in)
SpecificationExternal Dimensions Unit:mm(in)
SKT28
SKT28L
SKT28LM
Specifications
CNC Turning Center SKT28/28L/28LM
590( 23.2 ) 650( 25.6 )375( 14.8 ) 415( 16.3 )
254( 10 ) [ 305( 12 )]410( 16.1 ) 300( 11.8 )
720(28.3 ) 1,070(42.1 ) 1,000(39.37 )76( 2.99 ) [ 80( 3.15 )]
3,000 3,500STEPLESS
A2-895( 3.74 )130( 5.12 )
- - 0.001- - 100
SERVO10 12
0.3 / 0.825 (1 )
50 ( 2 ) 5,725(12,621) 4,520 (9,967)
- - 4,000- - 20 ( 3/4 )- - M16 (5/8 )- - 5.5/3.7 (7.5/5)- - VDI40
20(787)24(945)
220(8.7 )750 (29.5 ) 1,100(43.3 ) 1,020 (40.2 )
MT#5100( 3.9 )120(4.7 )
570(22.4 ) 920(36.2 )740(1,631)
22/18.5 (30/25) 3(4)
4(5.33)1.2(1.6)
180(47.55) 200(53)25 30
1,950(76.8 )3,010 1,812 3,620 1,812 3,670 1,812
(118.5 71.39 ) (142.5 71.3 ) (144.5 71.3 )6,100(13,448) 8,000(17,637) 8,100(17,857)
FANUC Oi-T [FANUC 21i-T]
CHIP CONVEYOR & BOXGUN COOLANTWORK COUNTERSPINDLE INSIDE STOPPERAUTO DOOR2 STEP CHUCK PRESSURE SYSTEMBAR FEEDER INTERFACESPINDLE INSIDE COOLANTAIR BLOW
CALL LIGHT( 3 COLOR)WEEKLY TIMERPROGRAMMABLE TAIL STOCK
HYDRAULIC HOLLOW CHUCK 1SETSOFT JAW 3EA/1SETQ-SETTER 1SETTOOL HOLDER 1SETCOOLANT SYSTEM 1SETWORK LIGHT 1SETLEVELING PADS 1SETTOOL BOX & HAND TOOL KIT 1SETFOOT SWITCH 1EA
SPINDLE SPEED OVERRIDE 1EASPINDLE RPM METER 1EASPINDLE LOAD METER 1EACHUCK OPEN/CLOSECONFIRMATION SYSTEMDOOR INTERLOCKMANUAL TAIL STOCK
ITEMS SKT28 SKT28L SKT28LMSWING ON THE BEDSWING OVER THE CROSSCHUCK SIZEMAX. TURNING DIA.MAX. TURNING LENGTHBAR CAPACITYMAX. SPINDLE SPEEDSPINDLE TYPESPINDLE NOSESPINDLE THRU HOLE DIA.SPINDLE BRG. DIA.( I.D)MIN. INPUT INCREMENT RAPID TRAVERSEMECHANISMNO. OF TOOLSINDEXING TIME (1TOOL/FULL)TOOL SHANK SIZE(O.D)BORING BAR SIZE(I.D)CLAMP FORCEMAX. SPEEDENDMILLTAPMOTOR POWERTYPE
TAPER SIZEQUILL DIAMETERQUILL STROKETAIL STOCK TRAVELTHRUSTMAIN SPINDLE
TOOL POST
RAPID TRAVERSE
TRAVEL
X-AXISZ-AXISX-AXISZ-AXIS
X-AXISZ-AXIS
HEIGHT(H)
FLOOR SPACE(L W)
FEED
mm(in)mm(in)mm(in)mm(in)mm(in)mm(in)
rpm
ASAmm(in)mm(in)
Deg.rpm
EAsec
mm(in)mm(in)kgf(lbf)
rpmmm(in) mm(in)
kW(HP)
m/min(ipm)m/min(ipm)
mm(in)mm(in)
MTmm(in)mm(in)mm(in)kgf(lbf)
kW(HP)kW(HP)kW(HP)kW(HP)
(gal)KVA
mm(in)
mm(in)
kg(lb)
CAPACITY
SPINDLE
TOOLPOST
LIVETOOL
FEED
TAIL STOCK
MOTOR
COOLANT TANK CAPACITYELECTRIC POWER SUPPLY
MACHINE SIZE
WEIGHTCONTROLLER
C-AXIS
Standard Option
Specifications are subject to change for improvement without notice.
Specification
Controller
Controlled Axes 2(X,Z) axes(Max. 4 axes are available)Simultaneous Controllable Axes 2 axes(Max. 4 axes)Least Input and Command Increment 0.001mm(0.0001 )Spindle Speed Command S5 digits, Binary OutputSpindle Speed Override 50% - 150%(10 Steps)Spindle Orientation(1 Position) ProvidedMaximum Programmable Dimensions +8 DigitsDecimal Point Input ProvidedDirect Drawing Dimension Programming ProvidedMiscellaneous Function M2Canned Cycle: G90, G92, G94 Turning, Threading, FacingProgram Stop and End M00,M01Programmable Data Input(G10) ProvidedManual Jog Feed:Rapid, Jog Feed, Handle ProvidedManual Handle Feedrate x1, x10, x100Feed-rate Override 0-200% : 21 stepJog Override 0~2,000mm/min[79 ipm] : 21 stepRapid Traverse Override F0, F5, F25/F50, F100%Override Cancel ProvidedDwell G04,0-99999.999 secManual Continuous Feed Simultaneous,1 AxisJog-Handle (same mode) ProvidedIncremental Feed X1-1000Manual Reference Point Return ProvidedAutomatic Reference Point Return G28,G29Reference Point Return Check G27Second Reference Point Return G30Tool Nose Radius Compensation G40-G42Tool Function T7+1 / T6+2 digitsGeometry / Wear Compensation ProvidedDirect Input of Tool Offset Value Measured B ProvidedTool Offset Amount 6 digitsTool Offset Pairs 32 PairsTool Life Management ProvidedInch / Metric Conversion ProvidedWorkpiece Coordinate System(G52 ~ G59) ProvidedTape Code EIA RS-244-A/ISO 840(Automatic Recognition)Number of Registerable Progam 200 EAPart Program Storage Length 640M(2,100FT)Reader/Puncher Interface RS232CBuffer Register(256byte) ProvidedCustom Macro B ProvidedBlock Skip/Optional Block Skip(/2 ~ /9) ProvidedOptional Chamfering/Corner R ProvidedCRT/MDI 8.4 Color LCDBack Ground Editing ProvidedRun Hour / Parts Count Display ProvidedProgram Restart Provided
Figures in inch are converted from metric values.Design and specifications subject to change without notice.
Controls
Spindle functions
Feed functions
Tool functions
Coordinate functions
Tape functions
General functions
Reference functions
Program functions
FANUC 0i-T
CNC Turning Center SKT28/28L/28LM
Head Office
Namsan Plant Jungdong Plant Banwol Plant Gwangju Plant
Gwangju Plant
Machine Tools 2nd Plant Posung Plant Seosan Plant Melting & Molding Plant in China
Head Office & Factory
391-8 Kaumjung-Dong, Changwon, Gyeongnam, Korea+82 55 280 9293, +82 55 282 9680 //www.wia.co.kr trade@wia.co.kr
Seoul Office
8F, Hansol B/D, #736-1, Yeoksam-1Dong, Kangnam-Ku, seoul, Korea
+82 2 2033 8000 +82 2 2033 8181
30 Murray Hill Parkway, Suite 300. East Rutherford, NJ 07073 U.S.A. +1 201 489 2887, +1 201 489 2723//www.hyundai-kiamachine.com sales@hyundai-kiamachine.com
Karl-Hermann-Flach-Str. 36, 61440 Oberursel, Germany +49 6171 9790 0, +49 6171 9790 30bkchang@hyundai-kia.de
HYUNDAI - KIA MACHINE EUROPE GmbH (Oberursel Office)
Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 +86 10 8453 9850, +86 10 8453 9853 hikim@wia.co.kr
HYUNDAI - KIA MACHINE BEIJING
Room 501 Ocular B/D, No. 1336 Wu zhong Road, Shanghai, China 201103 +86 21 3431 0370~3, +86 21 3431 0376 hjkim@wia.co.kr
HYUNDAI - KIA MACHINE SHANGHAI
Room 1305 Citic Plaza No. 233 Tianhebei Road. Guangzhou, China 510613 +86 20 8752 1595/1596, +86 20 8752 1597iclee@wia.co.kr
HYUNDAI - KIA MACHINE GUANGZHOU
HYUNDAI - KIA MACHINE AMERICA CORP. (New Jersey Office)
411 Kingston Court Mt. Prospect IL 60056 +1 847 824 7770, +1 847 824 8995//www.hyundai-kiamachine.com sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE AMERICA CORP. (Chicago Office)
AV, Alicia Moreau de Justo 1848 Of 4-6 Puerto Madero(C1107AFL), Buenos Aires, Argentina +54 11 4313 1917, +54 11 4313 1929//www.hyundai-kiamachine.com sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE AMERICA CORP. (Argentina Office)
Kelsterbacher Str. 38-46 D-65479 Raunheim +49 6142 834 0, +49 6142 834 100yspark@hyundai-kia.de
HYUNDAI - KIA MACHINE EUROPE GmbH (Raunheim Service Center)
6B, EGA Trade Center, 809 Poonamallee High Load, Kilpauk, Chennai - 600 010, Tamilnadu, India +91 44 4305 7112, +91 44 4305 7116ytkim@wia.co.kr
HYUNDAI - KIA MACHINE INDIA OFFICE
4. (07. 03)