CMA BDHH 6519 E0-8 PA1 [Kompatibilitetsläge] · CMA-BDHH/6519/E0-8 Electrical specification:...

Post on 10-Jul-2020

12 views 0 download

Transcript of CMA BDHH 6519 E0-8 PA1 [Kompatibilitetsläge] · CMA-BDHH/6519/E0-8 Electrical specification:...

GSM / CDMA: 1800, 1900 & 2100

CMA-BDHH/6519/E0-8

Electrical specification:Frequency range 1800: 1710-1880 MHz

1900: 1850-1990 MHz2100: 1920-2170 MHz

Polarization 2 x Dual linear 45º

G i 1800 4 18 4 dBiGain 1800: 4 x 18.4 dBi1900: 4 x 18.8 dBi2100: 4 x 19.3 dBi

Horizontal = 3 dB beamwidth 65º 3º

Vertical = 3 dB beamwidth 1800: 7.4º 0.3º1900: 6.7º 0.2º2100: 6.2º 0.3º

Adj t bl l t i l d tilt 0º 8ºAdjustable electrical downtilt 0º -8º

VSWR <1.5:1

Isolation between inputs >30 dBFront to back ratio >25 dBFirst upper sidelobe suppression >18 dBFirst nullfill below horizon <20 dBCross-polar discrimination >20 dB

Inter modulation, IM3 (GSM) >153 dBc@2x43 dBmInter modulation, IM7 (UMTS) >163 dBc@2x43 dBmAntenna Efficency* 95 %Nominal impedance 50 ΩMax power per input 500 W

Mechanical specification:Connectors 4 x 7/16 femaleConnector position BottompLightning protection DC groundedHeight/Width/Depth mm (in) 1290 (51)/403 (15.8)/133 (5.2)Antenna weight 19 kg (44 lb)

Wind load at 42 m/s (94 mph) : Frontal 688 N (154 lbf)Lateral: 172 N (38 lbf)Rear: 802 N (180 lbf)

Survival wind speed 60 m/s (134 mph)Colour radome Light Grey, RAL 7035 Colour radome Light Grey, RAL 7035 Radome material ASA

Mounting hardware:Mounting bracket 2Bracket weight (complete) 5,6 kg (12 lb)Pole diameter 45-120 mm (1.8-4.7 in)Tilt bracket 0º-6º mechanical

© 2009 CellMax Technologies AB reserves the right to modify or change the above specifications without notice.

* Based on true measurements and calculated according to Prad/Pin.

office
Typewritten Text
Drawcom Pty Ltd Level 1, 70 - 80 Wellington Street, Collingwood VIC 3066, AUSTRALIA Phone: +61 3 9604 6900 Fax +61 3 604 6999 www.drawcom.com.au, info@drawcom.com.au