Post on 03-Sep-2020
152
The Most Common Corrective Movement
Use this corrective movement on american time®, Simplex®, Cincinnati, Faraday, Lathem and Edwards clocks. It’s guaranteed for one year, in stock and ready to ship the same day you place your order!
See page 159.
How to Read Your Motor Motor Voltage, as indicated by 24vac and 110vac, speed of revolutions (RPM), and frequency (Hz) are critical pieces of information when ordering motors.
When Ordering, specify all the information shown on the side of the motor you're replacing, starting with the voltage and speed of revolutions, followed by the model number.
Help from our advisors is just a phone call away at: 800-328-8996.
110vac 24vac
Clock Repairs & Parts
If you’re a do-it-yourselfer, you came to the right place to order the motors and movements you need to repair your facility’s clocks.
153Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
artsAllSync Plus® Replacement Movement Kits
1YearWARRANTY
Want Us to Repair Your Clocks?You own the clock but it needs one or two new components to get it working. Our Repair Technicians have experience repairing every major brand of clock made as early as the 1920's. If it can be fixed, they'll get it done. Their work is backed with a two-year warranty, which is hard to find on a new clock, much less a repaired clock.
More than 75 percent of our repair customers upgrade their mechanical system clocks to our AllSync Plus® solid-state circuit board movement. Here's why:
Extended Warranty
Energy Savings
Long Lasting
Cost Savings
Our two-year repair warranty is an industry leader.
AllSync Plus uses up to 80 percent less energy than mechanical clocks.
Solid-state circuit board has fewer moving parts to wear out.
Save up to $45 per clock repair.
2YearWARRANTY
energySAVER
energySAVER
SAVEMONEY
$
Our Customers Say It Best
I’ve had good service from American Time for more than 25 years. They have the parts I need for different clock systems all under one roof. I appreciate their stock of hard-to-find parts and that they support time systems no longer supported by the OEM manufacturers.
Craig Larson, Columbia Heights Public Schools
ASKIT01-J19 for Lathem, National, AmericanASKIT02-J19 for Simplex$78.95 Note: Minimum order 5
ASKIT03-J19 for Standard Electric$104.95 Note: Minimum order 5
154The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
ts
Repair with mechanical movement
Replace with AllSync®Plus
movementWired System Clocks
3-wire synchronous clocks: 110vac and 24vac: American Time A and B Series, Cincinnati D10 and D12, Edwards 010 and 012, IBM 77 Series, Simplex 77 Series, Lathem SS and Stromberg 3000
$130.00 $100.00
Electronic clocks: American Time, Simplex® and IBM $160.00 N/A
3-wire synchronous clocks: American Time H Series, Honeywell, Cincinnati D8 and Faraday $150.00 $100.00
3-wire synchronous clocks: National Time, Rauland and Dukane $150.00 $100.00
Standard CR and GRC dual motor clocks and American Time X Series DM clocks $170.00 $130.00
Single motor with correction coil: Setco dual motor series clocks and American Time X Series clocks $170.00 $130.00
Repair ServiceOften times, repairing a failed legacy clock means replacing the motor movement. That replacement can be as easy as sending us the clock.
Whether you choose another mechanical movement, or our AllSync® Plus movement, we'll repair, clean and test the clock to make sure it is back in working order and you'll receive it back under warranty.
Repair Pricing
2YearWARRANTY
We Can Repair Them All!
®
®
FARADAY
1YearWARRANTY
155Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
arts
Repair Pricing
“Time Care” Repair Pricing
Repair GuidelinesIn order to guarantee prompt service, please call Customer Service at 800-328-8996 for a Return Material Authorization number (RMA #). You must get the RMA # prior to sending your clocks to American Time.
The package containing your repair must show on the outside the: RMA #, your company name and address, a contact name, telephone number and email address. Packages with an RMA # clearly shown will be prioritized ahead of those without.
Specialty Clocks
Glo Dial manual reset movement 1YearWARRANTY $170.00
Glo Dial remote reset movement 1YearWARRANTY $250.00
Costs are estimates only. Actual may vary. Evaluation for original equipment manufacturer (OEM), $25.Additional For glass crystal: add $10.00 for each 15" diameter clock and $30.00 for each 18" to 24" clock.
Charges: For Plexiglass crystal: add $20.00 for each 10" and 12" diameter clocks, $25.00 for 15" diameter clocks and $30.00 for 18" diameter clocks.
Stand Alone Clocks
AllSet quartz and electric clocks 2YearWARRANTY $50.00
R&H electric clocks and American Time M100 electric clocks 2YearWARRANTY $70.00
American Time quartz clocks: M Series quartz clocks and R&H Series quartz clocks 2YearWARRANTY $50.00
Radio Controlled clocks 1YearWARRANTY $50.00
Mechanical Clocks
Dual motor clocks, 45th and 59th minute correction: American Time and Simplex® 1YearWARRANTY $170.00
Dukane Old Style AC/DC clocks and American Time D Series clocks 1YearWARRANTY $160.00
Edwards dual motor replacement clocks and American Time P Series clocks 1YearWARRANTY $150.00
2 and 3-wire 24vdc minute impulse clocks: American Time, Simplex®, Cincinnati and Lathem 1YearWARRANTY $150.00
American Time V Series impulse clocks and Stromberg minute impulse 24vdc clocks 1YearWARRANTY $150.00
Network Clocks
Wi-Fi analog clocks 2YearWARRANTY $100.00
Wi-Fi digital clocks 2YearWARRANTY Evaluation
American Series Power over Ethernet (PoE) analog clocks 2YearWARRANTY $100.00
American Series Power over Ethernet (PoE) digital clocks 2YearWARRANTY Evaluation
System Clocks
SiteSync IQ® wireless analog clocks 2YearWARRANTY $100.00
SiteSync IQ wireless digital clocks 2YearWARRANTY Evaluation
SiteSync IQ master and Remote Transmitter 2YearWARRANTY Evaluation
AllSync Plus analog clocks 2YearWARRANTY $100.00
AllSync IQ® master 2YearWARRANTY Evaluation
156The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
tsGlo Dial Movements and PartsFor Large Dial Outdoor Clocks/Signs 18", 24", 30", 36" & 48"
9172
CRS12901 CRS970(switch)
H000107(keyed)
8075
Glo Dial CloCk HanD Dimensions
CFF125A Backbox63⁄16"h × 63⁄16"w × 31⁄8"dIncluded with any Glo Dial movement purchase(shown with movement)
Ø 916
MVMNTBOX
HR HUB
MIN HUB
CB
A
38
Ø1.000
Hand Shaft Lengths A B CSHORT 11⁄16" 17⁄16" 23⁄16"LONG 3" 33⁄4" 41⁄2"
A
DC
B
Hand
Short shaft
Long shaft
Specially designed for outdoor operation, these movements will keep correct time under all weather conditions. Precision-cut gears, slow-turning shafts and lubricants ensure long, maintenance-free operation. The motors used on Glo Dial movements are designed to carry a greater load than required with no need for heaters or fans for extreme weather.
• Maximum rated face diameter: 48"• Specify long shaft for internally illuminated clocks (allows movement to
be recessed to reduce shadows around the hub area)• Wired remote reset switches available• Temperature range -40˚ to +140˚ F
1YearWARRANTY
Note: If making hands, maximum combined hand weight may not exceed 19.9 oz.
Part No. Original No. Description EachN12930-J19 H200M2 Manual reset—short shaft $272.95N12932-J19 H200M4 Manual reset—long shaft $303.95N12931-J19 H200R2 Electric remote reset—short shaft $377.95N12933-J19 H200R4 Electric remote reset—long shaft $408.95CRS12901-J19 Outdoor remote reset switch $85.95CRS970-J19 Indoor remote reset switch $45.95H000107-J19 Key lock switch $59.95H002940-J19 Replacement key for H000107 $5.958075-J19 120vac, 1rpm, drive motor $47.959172-J19 120vac, 2rpm, reset motor $52.95
FYI – For rear installation (sign style), use the four side mounting holes on the backbox. For wall installation (front, skeleton style), use the four front mounting holes. All hands manufactured by American Time for large movements (18" through 48") are balanced. In order to maintain the warranty on these movements, they must be driving balanced clock hands.
Face Dia. Part No. Description Each A B C D18" CH911-J19 Minute hand $31.95 83⁄4" 211⁄16" 11⁄2" 13⁄16"18" CH910-J19 Hour hand $31.95 63⁄4"24" CH913-J19 Minute hand $37.95 107⁄8" 31⁄4" 2" 13⁄16"24" CH914-J19 Hour hand $37.95 71⁄4"30" CH919-J19 Minute hand $42.95 14" 41⁄4" 21⁄4" 1"30" CH918-J19 Hour hand $42.95 101⁄2"36" CH923-J19 Minute hand $47.95 163⁄8" 43⁄4" 23⁄4" 13⁄4"36" CH922-J19 Hour hand $47.95 107⁄8"48" CH927-J19 Minute hand $52.95 217⁄8" 61⁄4" 33⁄4" 17⁄8"48" CH926-J19 Hour hand $52.95 149⁄16"
CJ2900-J19 Hub kit $29.95 (required if making your own hands)
157Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
artsReplacement System Clock Movements
Complete with Correction Bracket and Coil Assembly
E65RA(KT65RA)
SETCO original
CinCinnati, eDwarDsWired Synchronous(set hands at 5:59)
FaraDay, HoneywellWired Synchronous(set hands at 4:58)
simplex®, iBmWired Synchronous(set hands at 5:59)
1445
1444
288003 288001
national timeWired Synchronous(set hands at 6:00)
stanDarD® eleCtriC GrC Dual Motored(set hands at 6:00)
See page 119 for hands.
Includes hands for a 12" clock
Includes hands for a 12" clock
If you're doing your own system clock repairs, we have everything you need to get the job done right. We also offer an Installation/Operation manual for our best selling mechanical movements. Ask for it when placing your order.
Part No. Voltage Each
Simplex, IBM
N1276-J19 120/120vac $107.95
N1276E-J19 Electronic $135.95
N1277-J19 120/24vac $107.95
N1278-J19 24/24vac $107.95
Cincinnati, Edwards
N1273-J19 120/120vac $107.95
N1274-J19 120/24vac $107.95
N1275-J19 24/24vac $107.95
Faraday, Honeywell
N1193-J19 120/120vac $114.95
N1194-J19 120/24vac $114.95
N1195-J19 24/24vac $114.95
Motors Only for above movements
288003-J19 120vac $31.95
288001-J19 24vac $31.95
Part No. Voltage Each
National Time, NATSCO
N1279110-J19 120vac $209.95
N127924-J19 24vac $209.95
Motors Only for above movements
E65RA-5-6-110V-J19 120vac $42.95
E65RA-5-6-24V-J19 24vac $42.95
Part No. Voltage Each
Standard, SETCO
N109410110-J19 120vac $304.95
N10941024-J19 24vac $314.95
Motors Only for above movements
1444-J19 120vac, 1rpm $42.95
6743-J19 24vac, 1rpm $42.95
Reset Motor
1445-J19 120vac, 60rpm $42.95
6761-J19 24vac, 60rpm $42.95
158The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
ts
1
4
3
5
2
8
4
79
Extension Spring Part of Item 1
6
34
7
8
9 10 411
12
5Bushingpart of Item 6
Replacement for Cincinnati ⁄Edwards Correction Bracket AssemblyComplete Assembly
Doing a Lot of Repairs? American Time has two kits containing the parts you will need to repair your clock movements. The two versions are used for the Simplex® and Cincinnati replacement movements, which use the 33-1111 and 33-1112 on the facing page.
Part No. Description Each
CA19110-J19 120vac/60Hz $41.95
CA1924-J19 24vac/60Hz $42.95
CA2020-J19 Less Coil $20.95
Part No. Item Description Each
542098R-J19 1 Coil (120vac) $22.95
542086R-J19 1 Coil (24vac) $22.95
CA418-J19 2 Yoke Assembly $ 5.95
424037-J19 3 Screw $ 0.45
268026-J19 4 Washer $ 0.25
A2041-J19 5 Roll Pin (529-138) $ 0.95
CA417-J19 6 Armature $ 6.95
CA417A-J19 6 Armature Assembly $ 9.95
A2039-J19 7 Stud (539-016) $ 0.95
A1210-J19 8 Shim $ 0.60
CA020-J19 9 Cam $ 0.95
S002-1-J19 10 Sector $ 2.65
322117-J19 11 Hex Nut $ 0.35
Complete Assembly
Part No. Item Description Each
A1161AR-J19 1 Coil Assy. (120vac) $13.95
A1162A-J19 1 Coil Assy. (24vac) $13.95
CFF102-J19 2 Coil Bracket $3.95
A1167-J19 3 Screw $0.25
9007603-J19 4 Screw $0.25
A3224-J19 5 Washer $0.25
H004422-J19 5 Screw $0.25
CB8079-J19 7 Actuator Leaf Assembly $5.95
22172-J19 8 Return Spring $1.00
A1166-J19 9 Corrective Lever $3.95
Part No. Description Each
CB2007-J19 120vac/60Hz $24.95 (D10)
CB2008-J19 24vac/60Hz $24.95 (D12)
Replacement Movement PartsReplacement for Simplex® Correction Bracket Assembly
Part No. KIT-SIM-J19 $64.95
For American Time, Simplex® and IBM 3-wire synchronous clocks. Kit includes:
30 226002 Grommets 5 CA020 Cams
30 394127 Rivets 5 S002-1 Sectors
30 327002 Speed Nuts 10 A1132 Wire nuts
5 511131 Friction Plates 20 942512A Terminals
5 511110 Min. hand nuts 20 A1165 Screws
5 511129 Sec. hand nuts 20 A1125 Wire ties
1 SIMPLEX-MANUAL Installation/Operation Manual
Part No. KIT-CIN-J19 $64.95
For American Time, Cincinnati and Edwards 3-wire synchronous clocks. Kit includes:
30 226002 Grommets 5 A1166 Correction lever
30 394127 Rivets 5 22172 Return springs
30 327002 Speed Nuts 20 A1132 Wire nuts
5 511131 Friction Plates 20 942512A Terminals
5 511110 Min. hand nuts 20 M1111 Retainer rings
5 511129 Sec. hand nuts 20 A1125 Wire ties
1 CINC-MANUAL Installation/Operation Manual
159Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
arts
Mechanical Motor Movement onlyno correction coil
32
4
1
The most common corrective movement. Used in American Time®, Simplex®, Cincinnati, Faraday, Lathem and Edwards
288003 288001
1YearWARRANTY
Replacement Movements and Parts
IN STOCK—SAME DAY SHIPMENT!
Call Today to Request Your Motor Movement Manual
Replacement Movement Back Plate Part No. 33-1-J19$13.95
Part No. Item Description Each
288003-J19 1 Motor (120vac) $31.95
288001-J19 1 Motor (24vac) $31.95
226002-J19 2 Grommet $0.40
394127-J19 3 Rivet $0.55
327002-J19 4 Speed Nut (Simplex⁄IBM) $0.60
942977-J19 4 Speed Nut (Cinc⁄Edw) $0.60
Part No. Voltage Each
33-1111-J19 Motor Movement (120vac) $76.95
33-1112-J19 Motor Movement (24vac) $76.95
Our Customers Say It Best
“When it comes to movements and clock parts, you seem to have everything I need when I need it. I think you are a great supplier and I would recommend you to my peers. You have a knowledgeable staff with all the answers.”
Herb Terdin, Greater Orlando Aviation Authority
160The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
tsReplacement Motors
Collector Assembly Movement
Time Recorder Motor
Used in advertising lights, such as: Budweiser Parade (shown)Budweiser SpectacularBudweiser Illuminated Spectacular Olympic GlobeMichelob Light Hanging CrystalMichelob Hanging CrystalMichelob Soaring EagleMichelob Amberbach 2001
Replacements for: Erie, Honeywell, FlairDamper Control MotorsCLASS A
Replacement damper control motors for Erie classic zone valves in hydronic heating systems. Not to be used with Erie “pop top” valves.
These motors are all CCW rotation.
*Requires a 5 piece minumum order.
1YearWARRANTY
Our Customers Say It Best
“Thank you for your great team effort when I ordered a part for a customer’s 1950s Chevrolet Dealer Clock. The staff at American Time has been nothing less than great, from the web site, fast shipping, quality of the part to the phone call to help me get the best shipping for my money. I haven’t seen this much service in a long time! Thanks to everyone involved in my little order. You made my customer and me very happy.”
Tom Vaughn, Tom's Tic Toc Shop
Part No. RPM Voltage Each
30A17A-J19 5⁄6 24v 50/60Hz $82.95
30A17B-J19 5⁄6 120v 50/60Hz $82.95
30A17U-J19* 5⁄6 240v 50/60Hz $82.95
Part No. RPM Voltage Each48001-181-J19 1.5 120vac 60Hz 4watt $102.95BZ357LD-110V-J19 (Motor Only) $52.95
MFG. Part No. Style Description Each
Lathem K342RC-5-6-J19 D 120vac 60Hz 1rpm 4watt CW $46.95
161Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
artsSynchron® Clock Motors
*Synchron and American Time Part No. - use when placing order
288003 288001 14451444
Style ARound with 4 Mounting Lugs
Style BRound with 2 Mounting Lugs
Style CPear Shaped with 2 Mounting Lugs
Wall Clock Motors
Clock Mfg. Style Synchron® No. Part No. Rotation RPM Voltage Each
American Time A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
A Z43RA-1WR-5-6-J19* R 1 120vac/60Hz $64.95
C K43RC-5-6-110V-J19* R 10 120vac/60Hz $85.95
Cincinnati A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Dukane A E65RA-5-6-110V-J19* R 1 120vac/60Hz $42.95
A E65RA-5-6-24V-J19* R 1 24vac/60Hz $42.95
A CZ44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A CZ44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Edwards A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Faraday A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Honeywell A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
IBM A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Lathem A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
National Time A E65RA-5-6-110V-J19* R 1 120vac/60Hz $42.95
A E65RA-5-6-24V-J19* R 1 24vac/60Hz $42.95
Simplex® A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
A BD118LA-5-6 288006-J19 L 1 120vac/60Hz $52.95
Standard® C BB12LC-5-6 1445-J19 L 60 120vac/60Hz $42.95
C 35351L-5-6 1444-J19 L 1 120vac/60Hz $42.95
C BB12LC-5-6 6761-J19 L 60 24vac/60Hz $42.95
C 35351L-5-6 6743-J19 L 1 24vac/60Hz $42.95
Stromberg A A44RA-5-6 288003-J19 R 1 120vac/60Hz $31.95
A A44RA-5-6 288001-J19 R 1 24vac/60Hz $31.95
Non-System A I43RA-76-6 288003-J19 R 1 120vac/60Hz $31.95
Non-System B DD129RB-6-76-J19* R 1 120vac/60Hz $42.95
Non-System B BZ357LD-110V-J19* L 1.5 120vac/60Hz $52.95
Cincinnati A K13RA-5-6-110V-J19 R 1 120vac/60Hz $52.95
Standard Electric C A12RC-5-6-110V-J19 R 1 120vac/60Hz $52.95
162The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
ts
Matching Nut
.390" max. dia. × .260 long
2.875"
2.625"Shaft is .784" from plate to tip
Rear Reset
Synchron® C Style Electric Movements
Type C2 Movements (for dial sizes 10-18")
Type C4 Movements (for dial sizes 10-24")
2.875"
2.625"
Shaft #3⁄824 ×.260 long
Shaft is 13⁄8" from plate to tip
Type C5 Movements (for dial sizes 10-24")
Synchron® movements perform flawlessly worldwide in a variety of speed and voltage/hertz combinations, with light to moderate torque loads. These precision Type C electric movements are designed and built to give sustained split-second accuracy in clocks ranging from the classic classroom to a built-in skeleton clock up to 24" in diameter. Choose from rear reset or bottom reset for your application. All movements are brass geared.
Bottom Reset
2.875"
2.625"
Shaft #3⁄824 ×.260 long
Shaft is 1" from plate to tip
Bottom Reset
Bottom Reset
1YearWARRANTY
For all movements:• Maximum hand weight 5 oz.• Temperature range -40˚F-140˚F• Smooth sweep hand
Rear Reset
Type C5 12 Hour
Bottom Reset
Part No. Voltage Each
N2068110V12C-J19 120vac $78.95
N206824V12C-J19 24vac $83.95
Supplied with a set of hands for 12" models listed
For other sizes change last two numbers before dash in Part No.
Type C4 12 Hour
Part No. Voltage Each
Rear Reset
N2069110V12C-J19 120vac $78.95
N206924V12C-J19* 24vac $83.95
Bottom Reset
N2067110V12C-J19 120vac $78.95
N206724V12C-J19 24vac $83.95*5 piece minimum order
Supplied with a set of hands for 12" models listed
For other sizes change last two numbers before dash in Part No.
Type C2 12 Hour
Part No. Voltage Each
Rear Reset
N1060110V12C-J19 120vac $78.95
N106024V12C-J19 24vac $83.95
Bottom Reset
N2066110V12C-J19 120vac $78.95
N206624V12C-J19 24vac $83.95
Supplied with a set of hands for 12" models listed
For other sizes change last two numbers before dash in Part No.
163Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
arts
1YearWARRANTY
Hands for the C Style Movements on page 162
Doing Clock Repair?Keep your clock appearance consistent and performing like new with these movements and accessories!
288003 288001
Sweep Second Hand
Hands for 12" Dial
Hands for 15" Dial
Hands for 18" Dial
Hands for 24" Dial
For C2 Movements
For C4 & C5 Movements
Bottom Reset Stems for Movements on page 162
Cotter pin included
Synchron® C Style PartsMotors for C Style movements
Dial Size C2 Movement C4 Movement C5 Movement
12" Part No. Each Part No. Each Part No. Each
Hour CFC143-J19 $4.95 CH315A-J19 $4.95 CH315A-J19 $4.95
Minute CFC144-J19 $4.95 CFC122-J19 $4.95 CFC122-J19 $4.95
Sweep A1438-J19 $4.95 CH282-J19 $4.95 CH282-J19 $4.95
15"
Hour CH005-J19 (also C4) $4.95 CH284-J19 $4.95 CH284-J19 $4.95
Minute CH013-J19 (also C4) $4.95 CH285-J19 $4.95 CH285-J19 $4.95
Sweep CH107P-J19 (also C4) $4.95 CH282-J19 $4.95 CH282-J19 $4.95
18"
Hour CH202-J19 $4.95 CH205-J19 $4.95 CH205-J19 $4.95
Minute CH203-J19 $4.95 CH288-J19 $4.95 CH288-J19 $4.95
Sweep A1800SHBLK-J19 $4.95 A1800SHC4C5-J19 $4.95 A1800SHC4C5-J19 $4.95
24"
Hour N/A CH290-J19 $4.95 CH290-J19 $4.95
Minute N/A CH291-J19 $4.95 CH291-J19 $4.95
Sweep N/A A1800SHC4C5-J19 $4.95 A1800SHC4C5-J19 $4.95
Part No. Orig. No. Voltage Each
288003-J19 I43RA-5-6 120vac/60Hz $31.95
288001-J19 I43RA-5-6 24vac/60Hz $31.95
J1603-J19 I43RA-5-6 240vac/60Hz $59.95
J1604-J19 I43RA-5-6 240vac/50Hz $59.95
Part No. Clock Size Stem Length Each
CFF113-J19 12" 41/2" $4.95
CFF114-J19 15" 71⁄2" $4.95
CFF115-J19 18" 9" $4.95
CFF116-J19 24" 10" $4.95
164The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
ts
Our Customers Say It Best
“I had a great experience to get my Harley Davidson light working. I thought I would be turned away because I needed a motor for a light, not a clock. The woman who helped me was very easy to work with. Your product arrived quickly and was exactly what I needed. I have my own business and I know the way you're handling your operations is top notch.”
Rob Rivas, Hi-Tech Inspection Service
Electric MovementsAllSet® Electric Movement
Clock Receptacle (2-pole/3-wire)
This white clock receptacle contains a 120vac, 15amp recessed outlet and clock hanger. Simply plug in your clock, wrap or tape the electrical cord behind it and hang the clock. 2-pole, 3 wire.
• Automatic Daylight Saving Time adjustment• 120vac/60Hz• 51/2' black cord• Accurate to ±0.8 seconds per day• Size: 21⁄4" square x 5⁄8"d• Supplied with a set of hands for a 12" dial• Step sweep hand• Shaft is 9⁄16”• Temperature range -5˚F to 140˚F
1YearWARRANTY
Once Set. You're AllSet®!
F Style HandsC Style Hands
688W-J19 $18.95
N404912C-J19 C style handsN404912F-J19 F style hands(Hands shown below)
$26.95
165Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
artsBattery Movements
AllSet® Battery Movement
1YearWARRANTY
1YearWARRANTY
• Easy set instructions• Uses one AA alkaline battery (sold separately)• Includes a set of hands for a 12" dial and mounting hardware• 21⁄8" x 21⁄8" x 5⁄8"d• Shaft 5⁄8" long• Temperature range -5˚F to 115˚F
F Style Hands
C Style Hands
The AllSet battery operated quartz movement automatically adjusts for Daylight Saving Time changes. No signals or antennas required!
AA Alkaline BatteriesA1238-J19
Each$.75
Don't forget the batteries!
AA Battery Movement Kit—12 Hour
• Accurate to ±1 second per day• Powerful stepper action• Uses one AA alkaline battery
(sold separately)• Includes a set of hands for a
12" dial (see styles above) and mounting hardware
• Temperature range 23˚F to 122˚F
This best selling movement is used in all our AA battery clocks. Customers tell us they appreciate the dependability and price of this high-efficiency movement.
MADE INUSA N2184
Shaft 1⁄4" dia. x 3⁄4" long
21⁄8" x 21⁄8" x 1⁄2"d
N347812C-J19 C style handsN347812F-J19 F style hands
$17.95
Part # Description Each
N218412C-J19 For dials up to 1/4" thick, C style hands $7.95
N218412F-J19 For dials up to 1/4" thick, F style hands $7.95
166The affordable solution to your clock repair needs.
7 –
Rep
airs
, Mov
emen
ts &
Par
ts
Part # Description Each
N104212C-J19 for dials up to 1/4" thick, C style hands $14.95
N104212F-J19 for dials up to 1/4" thick, F style hands $14.95
Battery MovementsRadio-Controlled Battery Movement
This radio controlled battery movement automatically resets at Daylight Saving Time changes. It uses a AA battery and has a miniaturized radio receiver that receives a signal from the NIST Atomic clock in Ft. Collins, CO. and adjusts several times a day.
The Powerhouse Q-90 “C” Battery Movement Kit—12 Hour
• Accurate to ±1 second per day• Powerful stepper action• Built-in molded hanger will hold up to 4 lbs.• Uses one C battery (sold separately)• Size: 23⁄4"h × 21⁄8"w × 1"d• Shaft is 5/8" long
• Accurate to ±1 second per day• Easy set instructions• Synchronized up to four times per day• Selectable automatic reset for Daylight Saving Time or
bypass for areas that do not observe DST• Includes a set of hands for a 12" clock• Uses one AA alkaline battery (sold separately)• Size: 35⁄8"h × 23⁄16"w × 5⁄8"d• Shaft is 1/2" long
Some customers prefer a C battery movement. The Q-90 has all the features of a reliable quartz movement.
Note: See hands above
F Style HandsC Style Hands
1YearWARRANTY
1YearWARRANTY
N218912C-J19 C style handsN218912F-J19 F style hands
$26.95
167Order by Fax 800-789-1882 Order by Phone 800-328-8996 Order Online american-time.com
7 –
Rep
airs, Movem
ents & P
arts
Part # Description Each
N213618C-J19 for 18" clock $22.95
Minute hand 8" from mounting hole to tip
N213624C-J19 for 24" clock $34.95
Minute hand 103⁄4" from mounting hole to tip
Battery MovementsSmooth Sweep Battery Movement
Compact High-Torque AA Battery Movement Kit for 18" and 24" Clocks
Kit includes:• Movement• Rubber Washer• Brass Hardware• Hanger• C style hands for 18" or 24" clock dial (including sweep second hand-not shown)
Features:• Made in Germany• Can drive hands for up to a 24" clock• Uses one AA alkaline battery (sold separately)• 21⁄8" x 21⁄8" x 5⁄8"d
C Style Hands
This movement, featuring a smooth sweep second hand, guarantees silent operation of your battery clocks.
• Silent operation• Uses one AA alkaline battery (sold separately)• Accuracy ±1 second per day• Built-in molded hanger• Includes a set of hands for a 12" dial and mounting hardware• 21⁄4" x 21⁄4" x 5⁄8"d• Shaft 5⁄8" long• Temperature range 23˚F to 122˚F
Need this movement in a complete clock? See page 139.
1YearWARRANTY
1YearWARRANTY
AA Alkaline BatteriesA1238-J19
Each$.75
N473312C-J19C style hands
$12.95