Post on 17-Nov-2015
description
CHEM-2002SIMULATION LAB SHEET 2Part-APhysical properties of library components*
*CHEM2002 - Dr. Ahmed Al-Dallal - 2013
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed stream composition is as follow:by simulation software calculate Dew-point pressure at 40CBubble-point pressure at 40CDew-point temperature at p=30 kg/cm2Bubble-point temperature at p=30 kg/cm2Recommended thermodynamic EOS is Peng-Robinsonlbmole/hr
*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
*For the Dew point calculation vapor phase fraction is 1
*Create new streamThis stream Bubble point at T=40 is as same as stream Dew point at T=40 just Vapor phase fraction is different
*
*
Choose the source stream
*
Information was defined from source file by Hysys
*
Information was defined from source file by Hysys
*For the Bubble point calculation vapor phase fraction is 0
*
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed stream composition is as follow:by simulation software calculate Dew-point pressure at 40CBubble-point pressure at 40CDew-point temperature at p=30 kg/cm2Bubble-point temperature at p=30 kg/cm2Recommended thermodynamic EOS is Peng-Robinson*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
*
*
*
*
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed stream composition is as follow:by simulation software calculate Dew-point pressure at 40CBubble-point pressure at 40CDew-point temperature at p=30 kg/cm2Bubble-point temperature at p=30 kg/cm2Recommended thermodynamic EOS is Peng-Robinson*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
*
*
Part-APhysical Properties of library component*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
*To create new caseIt is desired to find physical properties of Ethylene GlycolComponent formula: C2H6O2
*Click Add button to create new component listFirst step is introducing components to simulation software
*when component formula is used, the formula button should be activated
All these components are same
*
*Double Click here to see some of EgLYCOL physical properties
*
*
*
*
*
*More properties can be calculated in simulation environment
*
*
*
*
Part-BPhysical Properties of Hypothetical component*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
IntroductionHYSYS allows you to create non-library componentsHypothetical components can be pure components mixtures or solidsYou can also convert library components to hypothetical components which allow you to modify library values
*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
*Add Ethanol from library to the component list then make a hypothetical component with normal boiling point=78.25C and density= 787.41 with following structure CH3CH2OH. Compare calculated properties by HYSYS for these two materials.Choose UNIQUAC as thermodynamic package
*
*
*
*
*
*
*
*
*CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed Al-Dallal - 2013