CCSU CET 501 Spring 2015 Mid Term Exam:File a packet tracer file in Blackboard when you are done. Use generic routers, 2950-24 Switches, and Generic End User Devices. Remember to complete User Profile in Packet Tracer!

DeviceInterfaceIP AddressSubnet MaskDefault Gateway

S2/0200.200.200.1255.255.255.252n/a

R1FastEthernet0/0192.168.1.254255.255.255.0n/a

FastEthernet1/0192.168.2.254255.255.255.0n/a

S2/0200.200.200.2255.255.255.252n/a

R2FastEthernet0/0192.168.3.254255.255.255.0n/a

FastEthernet1/0192.168.4.254255.255.255.0n/a

PC 0NIC192.168.3.1255.255.255.0192.168.3.254

PC 1NIC192.168.4.1255.255.255.0192.168.4.254

PC 2NIC192.168.1.1255.255.255.0192.168.1.254

PC 3NIC192.168.2.1255.255.255.0192.168.2.254

DIRECTIONS:1. Configure the interfaces as shown in the table.60 points2. Name the routers and switches as shown in the table20 points3. Enable EIGRP on both routers using the following commands:a. For R1Router EIGRP 1Network 200.200.200.0Network 192.168.1.0Network 192.168.2.0

b. For R2Router EIGRP 1Network 200.200.200.0Network 192.168.3.0Network 192.168.4.04. Ping each workstation from each workstation20 points