Post on 14-Mar-2018
'-'* ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
SUPPLEMENTARY EC- TYPE EXAMINATION CERTIFICATE1
2 Equipment or Protective System Intended for usein Potentially explosive atmospheres
Directive 94/9/EC
3 Supplementary EC- Type Examination Certificate Number: BASOOA TEXl 033X/l
4 Equipment or Protective System: MODEL 644H TEMPERATURE TRANSMITTER
5 Manufacturer: ROSEMOUNT INCORPORATED
6 Address: 12001 Technology Drive, Eden Prairie, Minnesota 55344-3695, USA
7 This supplementary certificate extends EC-Type Examination Certificate No. BASOOATEXIO33X toapply to equipment or protective systems designed and constructed in accordance with thespecification set out in the Schedule of the said Certificate but having any variations specified in theSchedule attached to this certificate and the documents therein referred to.
This Supplementary Certificate shall be held with the original Certificate.
This certificate may only be reproduced in its entirety and without any change, schedule included.
File No: EECS 0914/02/060
This certificate is granted subject to the general conditions of the ElectricalEquipment Certification Service. It does not necessarily indicate that the apparatusmay be used in particular industries or circumstances.
~ Electrical Equipment Certification Service Ti I M CLEARE~~ Health and Safety ExecutiveHSE Harpur Hill, Buxton, Derbyshire, SK17 9JN, United Kingdom DIRECTOR
Health & SafelY Tel: +44(0)129828000 Fax: +44(0)1298 28244 15 Ma y 2001E.ecullve . t b ., ail b ., inti @hsL ukm emet: www. asee.a.com e-m : asee.a. o.eecs gov.
~~~~~~~~~~~~~~~~~~~~~~~Page 1/2CERTlATEX\EQillP\CATI-2\S, Issue 1, Dated September 1998
"'*~~~~~~~~~~~~~~~~~~~~~
Schedule
SUPPLEMENTARY EC-TYPE EXAMINATION CERTIFICATE N° BASOOATEXIO33X/I
Description of the Variation to the Equipment or Protective System
To
pennit the use of an alternative rail mounting enclosure, thus fonning the:
MODEL 644R TEMPERATURE TRANSMITTER
BASEEFA Certification Report No 00(C)0848 dated 3 May 2001.
Essential
Health and Safety Requirements
Issue
AG
AC
AD
AC
Date2.9.01
10.17.00
10.17.00
9.5.00
DescriptionGeneral Arrangement
Flexible PCB Circuit Diagram
Flexible PCB Component Overlay
Flexible PCB Details
Number00644-0005 Sheets 1 and 2
00644-1106
00644-1108
00644-1109 Sheets 1 and 2
The above drawings are associated with BASOOATEXIO34X/1
This certificate may only be reproduced in its entirety and without any change, schedule included.
"*~~~~~~~~~~~~~~~~~~~~~Page 2/2
\.~~~~~~~~~~~~~~~~~~~~~~;;;;:
13 Schedule
14 SUPPLEMENTARY EC-TYPE EXAMINATION CERTIFICATE N° BASOOATEXIO33X/2
Description of the Variation to the Equipment or Protective System
VARIATION 2.1
To permit:
1.
2.Minor mechanical and electrical modifications.Drawing information changes.
Report No.
None.
Special Conditions For Safe Use
See original certificate
Essential Health and Safety Requirements
See original certificate.
DRAWINGS
IssueACAK
AF
AF
Date3/21/00
3/21/01
3/21/01
6/19/00
DescriptionMain Board PWB
Main Board Coated
Main Board Schematic
LCD Board Assembly
Number
*00644-3200 Sheets 1 to 3
*00644-3201
*00644-3202 Sheets 1 & 2
03031-0591 Sheets 1 to 3
The above drawings are common to Certificate No. BASOOATEX3145/1
*These drawings are common to Certificate No. BASOOATEXIO34X/2
This certificate may only be reproduced in its entirety and without any change, schedule included.
~::%~~~~~~~~~~~~~~~~~:%~~:--.
Page 2/2
Certificate NumberBASOOATEX1033X/3
Issued 20th December 2002Page 1 of 3
1
2 Equipment or Protective System Intended for use in Potentially Explosive AtmospheresDirective 94/9/EC
Supplementary EC -Type BAS OOATEXIO33X/3Examination Certificate Number:
3
4 Equipment or protective system: MODEL 644H TEMPERATURE TRANSMITTER
Manufacturer: ROSEMOUNT INCORPORATED
Address: 12001 Technology Drive, Eden Prairie,
Minnesota 55344-3695, USA
This supplementary certificate extends EC -Type Examination Certificate No. BASOOATEXIO33X to apply toequipment or protective systems designed and constructed in accordance with the specification set out in theSchedule of the said certificate but having any variations specified in the Schedule attached to this certificate andthe documents therein referred to.
5
6
7
This Supplementary Certificate shall be held with the original certificate.
The original certificate was issued by the Electrical Equipment Certification Service, Notified Body Number 0600,which retains responsibility for its original documentation. Baseefa (2001) Ltd., Notified Body Number 1180, isresponsible only for the additional work relating to this supplementary certificate and any other supplementarycertificate it has issued.
This certificate may only be reproduced in its entirety, without any change, schedule included.
Report No 02(C)0274 dated 20th December 2002
Baseefa (2001) Ltd. Customer Reference No. 0914 Project File No. 02/0274
~
This certificate is granted subject to the general terms and conditions ofBaseefa (2001) Ltd. It does not necessarily indicate that the equipmentmay be used in particular industries or circumstances.
.s-'
RSSINCLAIR
DIRECTOROn behalf of
Baseefa (2001) Ltd.
Baseefa (2001) Ltd.Health and Safety Laboratory Site, Harpur Hill,
Buxton, Derbyshire SK17 9JNTelephone +44 (0) 129828255 Fax +44 (0) 129828216
e-mail info@baseefa2001.biz web site www.baseefa2001.bizRegistered in England No. 4305578 at 13 Dovedale Crescent, Buxton,
Derbyshire, SK17 9BJ
Certificate NumberBASOOATEX1033X/3
Issued 20th December 2002Page 2 of 3
Schedule
Description of the variation to the Eqnipment or Protective System
Variation 3.1
To permit the use of an alternative printed circuit board assembly having identical input and outputcharacteristics.
Variation 3.2
To pernlit further minor changes to the components on the new printed circuit board introduced at Variation 3.1
Report No.
02(C)O274
Special Conditions for Safe Use
None
Essential Health and Safety Requirements
Compliance with the Essential Health and Safety Requirements is not affected by this variation
Drawings and Documents
Issue DateNumber Sheet
Drawings associated with Variation 3.1
00644-0005 1
00644-0005 2
00644-4150 1
00644-4150 2
00644-6800 1
00644-6800 2
00644-6100 1
00644-6100 2
00644-6100 3
00644-6101 1
00644-6101 2
00644-6101 3
00644-6102 1
00644-6105 1
00644-6106 1
Description
AJ
AJ
AD
AD
AA
AA
AA
AA
AA
AA
AA
AA
AA
AB
AA
10/22/02
10/22/02
07/30/02
07/30/02
11/12/02
11/12/02
08/07/02
08/07/02
08/07/02
08/06/02
08/06/02
08/06/02
08/06/02
10/15/02
08/22/02
644H, 244E General Assembly
644H, 244E General Assembly
644H Case
644H Case
644H, 244E System Schematic
644H, 244E System Schematic
644H, 244E Main Board Schematic
644H, 244E Main Board Schematic
644H, 244E Main Board Schematic
644H, 244E Main Board PCB
644H, 244E Main Board PCB
644H, 244E Main Board PCB
644H Main Board CCA
644H, 244E Filter Board Schematic
644H, 244E Filter Board PCB
Certificate NumberBASOOATEX1033X/3
Issued 20th December 2002Page 3 of 3
00644-6106 2 AA 08/22/02 644H, 244E Filter Board PCB
00644-6106 3 AA 08/22/02 644H, 244E Filter Board PCB
00644-6107 I AA 08/22/02 644 Filter Board Component Layout
00644-6107 2 AA 08/22/02 644 Filter Board Component Layout
00644-6107 3 AA 08/22/02 644 Filter Board Component Layout
644-6110 1 AA 11/18/02 644 Railmount Circuit Schematic
00644-6111 1 AA 11/18/02 644 Railmount Flex Circuit
00644-6111 2 AA 11/18/02 644 Railmount Flex Circuit
00644-6112 1 AA 11/18/02 644 Railmount Flex Circuit
*00644-1010 1 AK 10/29/02 644 IS Label
*00644-1010 3 AK 10/29/02 644 IS Label
*00644-1070 1 AD 10/29/02 644 IS Label Railmount
*00644-1070 2 AD 10/29/02 644 IS Label Railmount
*00644-1070 3 AD 10/29/02 644 IS Label Railmount
00644-1015 1 AG 10/29/02 644 Range Label
00644-1015 2 AG 10/29/02 644 Range Label
00644-1015 3 AG 10/29/02 644 Range Label
00644-1015 4 AG 10/29/02 644 Range Label
Drawings associated with Variation 3.2
00644-6100 1 AB 10/17/02 644H, 244E Main Board Schematic
00644-6100 2 AB 10/17/02 644H, 244EMainBoard Schematic
00644-6100 3 AB 10/17/02 644H, 244EMainBoard Schematic
00644-6101 1 AB 10/17/02 644H, 244E Main Board PCB
00644-6101 2 AB 10/17/02 644H,244EMainBoardPCB
00644-6101 3 AB 10/17/02 644H,244EMainBoardPCB
00644-6102 1 AB 10/17/02 644HMainBoardCCA
00644-6105 1 AC 10/22/02 644H, 244E Filter Board Schematic
00644-6106 1 AB 10/22/02 644H, 244E Filter Board PCB
00644-6106 2 AB 10/22/02 644H, 244E Filter Board PCB
00644-6106 3 AB 10/22/02 644H, 244E Filter Board PCB
00644-6107 1 AC 11/18/02 644 Filter Board Component Layout
00644-6107 2 AC 11/18/02 644 Filter Board Component Layout
00644-6107 3 AC 11/18/02 644 Filter Board Component Layout
The above drawings with the exception of those marked * are also associated with BASEEF A Certificate Nos.BASOOATEXI034X/3, BAS99ATEX3084U/2 and BASOOATEX3145/2