Post on 05-Apr-2018
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
1/106
Module11.6: ElectricalPower
Electromagnetic Induction
ReviewOfElectricalFundamentals
D.C.Generation
D.C.Motor
VoltageRegulation
A.C.Generation
,
Batteries
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
2/106
Review ofElectricallectricalFundamentals
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
3/106
D.C. SERIES CIRCUIT
Inaseriescircuit,
flowsthrough
butthevoltage
istheproductof
resistance.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
4/106
PARALLEL D.C CIRCUIT
Samevoltage
resistancebut
thecurrent
througheach
is
theratioof
volta e&the
resistance.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
5/106
COMPOUND D.C CIRCUIT
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
6/106
PARAMETERS OF A D.C CIRCUIT
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
7/106
VARIABLE RESISTOR & POTENTIOMETER
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
8/106
GENERATION OF A.C.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
9/106
GENERATION OF A.C.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
10/106
A.C FUNDAMENTALS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
11/106
LEAD & LAG IN A.C CIRCUITS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
12/106
POSIT IVE & NEGATIVE POWER
RESISTIVEINDUCTIVE
CIRCUITI UIT
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
13/106
Electro MagneticI d tinduction
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
14/106
Electro - Magnetism
.
EFFECTOFLAMINATION
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
15/106
Electromagnetic Induction
The transfer of electric energy from one
circuit to another without the aid of electric
connections is called induction.
When electrical energy is
transferred by means of amagne c e , s ca e
electromagnetic
.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
16/106
Electromagnetic Induction
Electromagnetic induction occurs
whenever there is relative movement
between a conductor and a ma netic
field, provided the conductor is cutting
across e magne c nes o orce an s
not moving parallel to them.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
17/106
Electromagnetic Induction
The relative movement may be caused by a
stationary conductor and a moving field or
field.
A moving field may be provided by a
mov ng magne or y c ang ng e va ue o
the current in an electromagnet.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
18/106
Faradays Laws Of Electromagnetic Induction
Faradays First Law - Whenever a conductorcuts magnetic flux, an e.m.f is induced in that
conductor or whenever the magnetic fluxlinked with a circuit changes an e.m.f isu .
-induced e.m.f is proportional to the rate of
-
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
19/106
Direction & Magnitude of Induced EMF
The direction of induced e.m.f and current can befound by applying left-hand-rule for generators orLenzs Law.
- . .to flux-cutting i.e. dynamically induced e.m.f
enz s aw s use , w en s ue o c ange yflux-linkages i.e. statically induced e.m.f.
Faraday's second law determines the magnitudeof an induced e.m.f and Lenz's law determines the
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
20/106
Classification Of Electromagnetic Induction
Generat or Ac t ion
Mov ing c onduc t or, St a t ionar y f lux
Transfo rm er ac t ion
. .
St a t ionary c onduc t or, Vary ing f lux
Sel f I nduc e d E.M.F Mutu al ly I nduc e d E.M.F
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
21/106
LEFT HAND RULE FOR CONDUCTORS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
22/106
LEFT HAND RULE FOR COILS
For a current carrying
coil held in the left
hand, the encircling
fingers indicating the
,
the thumb indicates
the north pole of this
electromagnet.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
23/106
LEFT HAND RULE FOR GENERATOR
First finger Flux
t u Motion
e nger e.M.F
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
24/106
RIGHT HAND RULE FOR MOTOR
First finger Flux
. .
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
25/106
Fac t ors A f fec t ing Induc t ance
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
26/106
Induc t anc es In Ser ies & Para l le l
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
27/106
Induc t i ve React ance Vs- Frequenc y
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
28/106
Transformer:- Relation Between V, I & Turns
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
29/106
PRIMARY CURRENT FLOWS ONLY WHEN THE
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
30/106
AUTO TRANSFORMER
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
31/106
LIMITING, CHARGING &DISCHARGING OF A CAPACITOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
32/106
SERIES R-L-C CIRCUIT
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
33/106
RESONANCE IN AN A.C CIRCUIT
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
34/106
D.C. Generation
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
35/106
D.C. GENERATOR
DC enerator is a device
which converts mechanicalenergy n o e ec r ca energy
in the form of direct current.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
36/106
E.M.F INDUCED IN A COIL
When t hec o i l l i nk sw i t h t he
m ax . e.m .f.is induced in
.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
37/106
LEFT HAND RULE FOR GENERATOR
First finger Flux
thuMb Motion
. .
GENERATION OF D C
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
38/106
GENERATION OF D.C
G A O O C
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
39/106
GENERATION OF D.C
The commutator segment changes the polarity as thecoil travels through a set of poles.
EFFECT OF INCREASING NO OF COILS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
40/106
EFFECT OF INCREASING NO. OF COILS
no. of coils reducesripples of the dcvoltage.
no. o urns n eacloop will increase this
.
no. of loo s does not
increase the max. valueof generated voltage.
C
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
41/106
PARTS OF A D.C GENERATOR
Armature
A cylindrical structure in
Pole Shoes
It provides the required
house the copperconductors
permanent orelectromagnet
Frame or Yoke
It provides path for the
Commutator
It converts the induced. ,
the field coils & pole pieces.. . . .
Carbon brushIts function is to collect the d.c from the commutator
ARMATURE OF A DC GENERATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
42/106
ARMATURE OF A DC GENERATOR
A cylindrical structure,
ma e up o ron o
provide a highly
permeable path for the
around the armature
con uctor, n w c s otsare cut to house the coils.
FIELD POLE SHOES & WINDINGS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
43/106
FIELD, POLE SHOES & WINDINGS
A practical d.c generator uses electromagnetsinstead of permanent magnets. To produce a
magne c e o e necessary s reng wpermanent magnets would greatly increase the.
FIELD FRAME OF A D C MACHINE
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
44/106
FIELD FRAME OF A D.C MACHINE
COMMUTATOR & CARBON BRUSH
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
45/106
COMMUTATOR & CARBON BRUSH
The brushes ride on the,
electrical contact betweenrm r il x rn l
circuit.
TYPES OF D C GENERATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
46/106
TYPES OF D.C GENERATOR
D.C SERIES GENERATORThe armature & field are in series, so the flux
,
e.m.f.
D C SHUNT GENERATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
47/106
D.C. SHUNT GENERATOR
e e w n ng s para e o arma ure,thus the flux is independent of the load
. . . .
D C COMPOUND GENERATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
48/106
D.C COMPOUND GENERATOR
The series field has a rising voltage with load &the shunt field has a drooping voltage chas. Soa g er oa s, ser es e compensa es e
drop & the terminal voltage is almost constant
TYPES OF D.C. GENERATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
49/106
TYPES OF D.C. GENERATOR
GENERATOR GENERATOR GENERATOR
ARMATURE REACTION
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
50/106
ARMATURE REACTION
The current carrying armature conductor has itsown field, which increases with the current,
field.
GENERATOR WITH INTERPOLE
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
51/106
GENERATOR WITH INTERPOLE
An int e rpo le
po lari t y ast he nex t m ainpole in t hed i rec t ion o fro a on usi t c oun te rac t s
reac t ion
D.C. GENERATOR CHARACTERISTICS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
52/106
Series
generator
with
chas.
Shunt
generator
withdrooping
chas.
D.C GENERATOR ASSEMBLY
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
53/106
D.C GENERATOR ASSEMBLY
VOLTAGE REGULATION
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
54/106
Induced e.m.f
to the flux. By
field circuit
resistance,
this e.m.f can
be controlled.
CARBON PILE VOLTAGE REGULATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
55/106
THREE UNIT VOLTAGE REGULATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
56/106
TRANSISTORISED VOLTAGE REGULATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
57/106
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
58/106
D.C MOTORS
D.C. MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
59/106
DC motor is a device which
converts
intomechanical energy
FIELD SURROUNDING
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
60/106
Force ofForce of
repu s ona rac on
Current Carry ing Conduc t or
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
61/106
y g
Whenever a current carrying conductor is placed in amagnetic field, a force moves this conductor from aregion of more flux to lesser flux.
TORQUE ON A CURRENT CARRYING COIL
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
62/106
On the upper side of the conductor A, flux is
upwards similarly B moves downward,creating a torque.
RIGHT HAND RULE FOR MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
63/106
rs nger ux
Middle Fin er e.M.F
thuMb Motion
BASIC D.C. MOTOR OPERATION
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
64/106
ere are pos ons, w en ere s no orque
on the coil. So, in a practical motor more no.of coils arranged at different angles are used.
BACK EMF IN A MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
65/106
When the rotating armature cuts the main
magnetic field, an e.m.f is induced into it,known as back emf.
Back e.m.f increases with speed.
Difference between supply voltage & back
e.m.f decides the current to the motor and
the mechanical power developed.
TYPES OF D.C. MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
66/106
SERIES, SHUNT & COMPOUND MOTORS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
67/106
SPEED CONTROL OF A DC MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
68/106
REVERSING MOTOR DIRECTION
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
69/106
With SPDT switch With DPDT switch
GROWLER
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
70/106
The coil &laminatedcore of
growler formt e pr mary oa transformer,
generatorsarmature
becomes thesecondary.
TESTIN G AR M ATUR E FOR SH OR TS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
71/106
The hacksaw
vibrate
there is any
armature
TESTING A GROUND IN THE ARMATURE
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
72/106
If a ground exists
& the core of the
armature, the test
lam will glow. Thistest may also be
an ohmmeter.
TESTING THE FIELD COILS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
73/106
FOR SHORTED TURN FOR SHORT TO GROUN
OUTPUT OF A DC ALTERNATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
74/106
A.C. MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
75/106
AC motor or induction motor is a device,which converts electrical energy (in the formof a.c.) to mechanical energy.
rotating one as rotor.
ere s no e ec r ca con ac e ween estator & the rotor. Conversion of energy is
.
STATOR & ROTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
76/106
A rotating magnetic field is produced when thestator is excited with a 3a.c. supply. The speed ofrotat on s ca e as sync ronous spee , as
Ns=120*f /P where f is the frequency & P is the no.
SQUIRREL CAGE ROTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
77/106
This type of rotor consists of a cylindrical
conductors, which are heavy bars of
copper, aluminium or alloys.
The motor operation depends upon the
rotor.
CONSTRUCTION OF STATOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
78/106
It is made of number of stampings,
windings.
Since aircraft electrical systems
operate at 400 Hz, an induction motor
6,000 rpm to 24,000 rpm.
CAPACITOR START INDUCTION MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
79/106
SLIP RING or PHASE WOUND ROTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
80/106
This type of rotor is provided with 3-phase windings, which are
starred internally. The other three terminals are brought out and
connected to three insulated slip rings mounted on the shaft with
brushes resting on them, under running condition, the slip rings are
s ort-c rcu te .
As soon as current flows in the stator the lines of ma netic fluxproduced in the field coils cut across the rotor and induce a voltage
in the bars. The rotor has such an extremely low resistance that the
induced voltage causes a large current to flow, and this currentcreates a magnetic field that reacts with the rotating field in the
stator.
Sl ip In An Induc t ion Mot or
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
81/106
The rotor of an induction motor will assume a position
in which the induced voltage is minimised. There must
e a erence n spee e ween e ro or an e
rotating field. This difference in speed is called slip,and is ex ressed as a ercenta e of the s nchronous
speed.
% slip = Ns-N x 100NsNs :- Synchronous speed = (120 x f / P) rpmN : Motor or Rotor speed:- Motor or Rotor speed
(Ns-N) is called the slip-speed
CAPACITOR START A.C. MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
82/106
1 a.c motors are not self starting.A capacitor with starting winding offers aphase shift & starts the motor.
SHADED POLE A.C. MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
83/106
The necessary phase-splitting.
low-resistance, short-circuited
coil or copper band is placedacross one p o eac smapole. The presence of the ring
causes the magnetic fieldthrough the ringed portion ofthe pole face to lag appreciably
part of the pole-face.
SYNCHRONOUS MOTOR
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
84/106
Because of the magnetic locking between the stationary & therotating parts magnetic fields, it runs at synchronous speed only.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
85/106
- .rotating magnetic field is produced. A direct current is
is produced.
,the rotor is subjected to a torque which is rapidlyreversing i.e. the rotor is subjected to torque whichtends to move it first in one direction and then in theopposite direction. Because of its large inertia, thero or can no ns an aneous y respon o suc qu c y
reversing torque and thus it remains stationary. Thus,.
.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
86/106
type of simple starter is another motor, either ac or dc, whichbrings the rotor up to approximately 90% of its synchronousspeed. The starting motor is then disconnected and the rotor
locks-in-steps with the rotating field.
Another starting method is a second winding of the squirrel-cagetype of rotor. This induction-winding brings the motor almost to
windings, the rotor pulls into step with the field. If the load on themotor is increased, rotor tends to fall back in phase but it stillcont nuous to run sync ronous y. e max mum torque, w c t e
motor can develop without pulling out of step or synchronism is,called the ull-out-tor ue.
SYNCHRONOUS MOTOR Vs- INDUCTION MOTOR
F i f h h
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
87/106
For a given frequency, the synchronous motor runs at aconstant average speed whatever is the load, while thes eed of an induction motor falls somewhat with increase inload.
- .
A dc excitation is required by synchronous motor but not by
induction motor.
A s nchronous motor can be o erated over a wide ran e ofpower factor both lagging & leading but induction motoralways runs at lagging power factor, which may become
.
Generat ion Of A.C.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
88/106
Generat ion Of A.C.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
89/106
Three Phase Dis t r ibut ion
Sine a e c rrent in each of Magnetic fields add as
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
90/106
Sine wave current in each ofthe coils produces sine varyingmagnetic field on the rotation
Magnetic fields add asvectors. Sum of the magneticfields produces the rotating
axis. magnetic field.
Three Phase Dis t r ibut ion
mp e cons ruc on
of 3 phase AC GeneratorOutput voltage producedby 3 phase AC Generator
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
91/106
of 3-phase AC Generator by 3-phase AC Generator
STAR or
Y - Connection
3 Phase A.C Generat or
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
92/106
,stationary partcontains 3 hasewindings and therotating magnetic
field induces athree phase output. .
3 Phase A.C Generat or
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
93/106
A Brushless 3-Phase A.C Generator
The PMG produces an output
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
94/106
The PMG produces an outputof 120V at 800 Hz which is fedto the PMG rectifier unit.
The output of the PMG rectifieris fed to the voltage regulator
which provides current for the.
The primary exciter fieldinduces current into
- .
The output of this winding isfed to three shaft-mountedThe main exciter winding is wound so as to form six
poles in order to produce an output at 115 VAC@400
a pulsating DC output which is
fed to the rotating fieldwinding.
Hz.
The excitation system is an integral part of the rotorand that there is no direct electrical connectionbetween the stator and rotor.
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
95/106
Inverters,T f &ransformers &Rectifiersectifiers
3-PHASE FULL WAVE RECTIFIER
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
96/106
Phase A 1, 4
Phase B 3, 6
ase 5, 2
+Ve Group 1, 3, 5 -Ve Group 2, 4, 6
Diodes between the lines of max. positive to. .
3-PHASE FULL WAVE RECTIFIER
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
97/106
3-PHASE FULL WAVE RECTIFIER
PHASE A PHASE B PHASE C
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
98/106
PHASE A PHASE B PHASE C
AVERAGE D.C.t e output conta ns pu ses n one cyc e
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
99/106
Batteriesatteries
LEAD ACID BATTERY
The positive electrode is lead peroxide and the negative
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
100/106
The positive electrode is lead peroxide and the negativeelectrode is spongy lead.
The electrolyte is dilute sulphuric acid.
The capacity depends on the size of the plate there arealways several plates each combined to one element by
-outside connection.
o preven any r s o ouc ng o p a es e ng s n
one another, separators are installed, a thin woodensheet and a corrugated perforated plastic-sheet.
Ni Cd BATTERY
The positive plates are made from a porous plaque on
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
101/106
p p p p qwhich Nickel Hydroxide has been deposited.
The negative plates are made from similar plaques onwhich Cadmium Hydroxide is deposited.
The electrolyte used is 30% by weight of KOH
.
The specific gravity of the electrolyte remainse ween . an . .
The battery charge can not be determined by aspecific gravity check of the electrolyte.
Lead Ac i d - Vs - Ni -Cd Bat t er y
ea c attery - attery
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
102/106
CELL IMBALANCE
In Ni-Cd battery the negative plate controls the cell's
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
103/106
y g pvoltage characteristics. This, with slightly lowerc arge e c ency n t e pos t ve-p ates, resu ts n animbalance between the negative and positive platesin each cell.
The cell-imbalance condition is reduced by pulse
charging, when the battery is close but below fullcharge. Then, proceed to complete the charge at acons an -curren ra e o approx ma e y o e
ampere-hour capacity of the battery.
DEEP CYCLING & EQUALIZATION
Discharging the battery at a rate somewhat lowerth th t d f th it t t
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
104/106
g g ythan that used for the capacity test.
When the cell voltage is down to around 0.2 volt percell, short across each cell with a shorting strap.
Leave the strap across the cells for three to eight
discharged.
.
equalization the battery is ready to charge.
NOTE
When installing the battery, connect the "hot"
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
105/106
. ,
between the battery and the aircraft with yourwrenc , you w not cause a spar t e groun
lead has not been connected.
When removing a battery, always disconnect the
groun ea rst or t e same reason.
SYMBOLS
8/2/2019 Car 66 A1 - Module 11.6 Electrical Power
106/106