Post on 09-Aug-2020
bstAIR
bstAIR 15-20
TECHNOLOGYYOU CAN
TRUST
AVAI
LABILIT
Y SERVICEABILITYRELIA
BILITY
PA
RTN
ERSHIP
SIMPLICITY
TECHNOLOGYYOU CAN
TRUST
AVAI
LABILIT
Y SERVICEABILITYRELIA
BILITY
PA
RTN
ERSHIP
SIMPLICITY
User benefitsThe bstAIR 15-20 single stage boosters are designed with the highest requirements for reliability and low cost of maintenance. Air and nitrogen boosters are widely used in different industrial applications with outlet pressures of up to 40 bar.
Ultimate reliability and performance
- High-quality component materials
- Low oil carryover with use of special oil retention system
Energy efficiency
- Direct drive transmission
- A highly efficient IE3 IP55 motor
Quiet and safe operation
- Strong anti-vibration dampers
- Well balanced, V-type, single-stage pump
Air and nitrogen boostersThere are many industries and processes where compressed air and nitrogen are used at higher pressures of up to 40 bar. PET blowing, laser cutting, pressure tests and abrasive cutting are among some of the widespread processes in which air or nitrogen boosters can be an integral part of the installation. The bstAIR booster can be connected to the plant’s low-pressure network. The standard booster range has a discharge pressure of up to 40 bar, with a flow range of 0.4 m3/min to 3.6 m3/min.
Low cost of maintenance, reliability, and a thoughtful approach to details make the booster an attractive piece of technology to integrate into the production process.
Booster technology: how does it work?
Air or nitrogen is compressed in a single-stage pump using the standard operating cycle of a piston compressor. Compression starts at a low pressure moving through the joint work of the inlet and outlet solenoid valves. The compressed air or nitrogen then enters the booster where it is further compressed up to 40 bar, in a single stage. The inlet pressure switch stops the booster when the inlet pressure exceeds the maximum allowed value or drops below the minimum allowed value. Cooling is provided by the axial fan installed on the shaft of the booster.
The booster is lubricated by the oil in the crankcase. The crankcase is vented via the oil separator and the oil breather, which allows operation with minimum oil carryover.
Smart technical advantagesTECHNOLOGY
YOU CANTRUST
AVAI
LABILITY SERVICEABILITY
RELIA
BILITY
PA
RTN
ERSHIP
SIMPLICITY
Highly reliable single-stage pump
- Advanced materials and treatment of main components
- Robust, reliable design and easy access for service
- Low vibration level
Direct-driven set
- Highly efficient IE3 motor as standard
- Fully enclosed air-cooled, IP55, F-class motor for heavy-duty operation
Electrical cubicle with soft starter
- Low electrical peaks
- Gradual stop of the motor
- 24V transformer is installed inside the cubicle
Technical specificationsMax. inlet
pressure
Max. outlet
pressureFree Air Delivery Recommended inlet flow Motor Power Noise level
Model bar bar m³/h l/s m³/h l/s kW hp dB(A)
bstAIR 15 6 40 87.2 24.2 104.4 29.0 11 15 83
bstAIR 20 6 40 144.0 40.0 172.8 48.0 15 20 83
Model Length (mm) Width (mm) Height (mm) Weight (kg)
bstAIR 15 1600 700 780 205
bstAIR 20 1600 700 780 210
20 bar(g)
30 bar(g)
40 bar(g)
bstAIR 15 bstAIR 20
Inlet pressure - bar(g)Inlet pressure - bar(g)1 2 3 4 5 6 71 2 3 4 5 6 7
0
500
1000
1500
2000
2500
3000
3500
4000
l/min
F.A
.D.
l/min
F.A
.D.
0
500
1000
1500
2000
2500
3000
Unit performance measured according to ISO 1217, Ed. 4, Annex C-2009. Mean noise level measured according to ISO 2151, Ed. 2004; tolerance 3 dB(A).
CUBICLE
FN
LS51
SV2
OS
M1
OB
SP2
SP1
CV1
YV1
S1
SV1
YV2US
CV1- Check Valve Inlet-CV2 Check Valve Outlet-FN Flywheel-LS51 Oil Level Sensor-M1 Motor
-OB Oil Breather-OS Oil Separator-S1 Cubicle Panel-SP1 Pressure Switch Inlet-SP2 Pressure Switch Outlet
-SV1 Safety Valve Inlet-SV2 Safety Valve Outlet-US Unloader Silencer-YV1 Inlet Solenoid Valve N.C.-YV2 Blow Off Solenoid Valve N.O.
1barg
6bar
40bar
CV2
SP3 Pressure Switch Inlet Min Pressure
SP3
Max. 6 barMin. 2 bar
Max. 40 bar
Contact your local sales representative now!
6999100480
Increase your profits and improve your company’s image
bstAIR 15-20Air and NitrogenBoosters
• A high-quality product and technology you can trust• Choosing our high-performance compressor ensures the availability of compressed air• Our products are simple, easy to use, and highly reliable• Serviceability and aftermarket are guaranteed• Original parts and services• Dealers are always nearby and complete the strong partnership you can expect
© 2
019,
All
right
s re
serv
ed. A
ll m
entio
ned
bra
nds,
pro
duc
t nam
es, c
omp
any
nam
es, t
rad
emar
ks, a
nd s
ervi
ce m
arks
are
th
e p
rop
erty
of t
heir
resp
ectiv
e ow
ners
. Our
pro
duc
ts a
re c
onst
antly
bei
ng d
evel
oped
and
imp
rove
d. T
here
fore
, we
thus
re
serv
e th
e rig
ht to
mod
ify p
rod
uct s
pec
ifica
tions
with
out p
rior
notic
e. Im
ages
are
not
con
trac
tual
ly b
ind
ing.
TECHNOLOGYYOU CAN
TRUST
AVAI
LABILIT
Y SERVICEABILITYRELIA
BILITY
PA
RTN
ERSHIP
SIMPLICITY