Post on 28-Mar-2016
description
product guide
This product guide was put together from the front seat of Stew Johnsons van. We were on the road to Dallas for the beginning of Props Megatour 10.
FRAMES
Offset thickness headtube
Externaldowntube
gusset
Internaltoptubegusset
Extra wide rear endtapered stays13.25 - 13.5
10mm or 14mmmicro dropouts
11.5 heightMid BB
20.7 or 21.1toptube
74.569
Removable brake
hardware
Integratedseatclamp
8.6 standover
The TrailOrPark is Kriss Kyles BSD frame, designed with technical park and trail riding in mind this steed is light, strong and ultra responsive. It has a real short back end slammable to just under 13.25 and a roomy front end due to the laid back seat tube angle.
Colours: Red, Black or Grey.Weight: 4.7lbs
The WZA (pronounced Wozza) has been designed exactly to Mike Taylors specification. There are quite a few neat but different features on this frame.The dropouts are designed to fit a peg and hubguard exactly using a 25-9 gear with no over-hang at all, they are also slotted forwards a little extra so you can take your wheel on and off without taking your chain apart. Note you need to use a halflink on this frame, we recommend using the Shadow halflink chain.
Colours: Black or Flat raw.Weight: 4.8lbs
FRAMES
Offset thickness headtube
Externaldowntube
gusset
Externaltoptubegusset
Extra wide rear endtapered stays
13.55
14mmmicro
dropouts
11.5 heightMid BB
20.6 or 21.1toptube
7571
Integratedseatclamp
No brake mounts
8.3 standover
Mike Jersey Taylor signature series
FRAMES
The Forever is the original BSD frame, with comfortable geometry this frame is built for everyone and is available in four toptube lengths. The Forever has been updated for 2011 with some changes including a new wider rear end, toptube gusset, ovalized downtube and a slotted seatclamp...
Colours: Black, Flat raw or Flat white.Weight: 4.8lbs.
Offset thickness headtube
Externaldowntubegusset
External toptube gusset
Extra wide rear endtapered stays13.5 - 13.75
*NOTE: 20.5 frame has 13.25 - 13.5
14mm dropouts
11.5 heightMid BB
20.5, 20.8, 21 or 21.2toptube length
74.571
Removable brake
hardware
Integratedseatclamp
8.5 standover
Mike Jersey Taylor signature series V2
FORKS
Fully heat treated 4130 chromo forkChrome, black, white, red or raw1.97lbs/890g
7075 steerer cap
Integrated headset race
Investment cast10mm dropout
32mm offset
Tapered legs
BSD Acid face logo
Machined one piece steerer
V2
V2
TOO LOOSE BARRise: 8 , Width: 28 Upsweep: 3, Backsweep: 13 Weight: 1.45lbsChrome, black, flat white, red or raw
VARIETY BARRise: 8, Width: 27
Upsweep: 2, Backsweep: 11 Weight: 1.5lbs
Chrome, black, red or raw
BARSHIGHLANDER BARRise: 8.5, Width: 29 Upsweep: 2, Backsweep: 11 Weight: 1.6 lbsChrome, black, flat white, red or raw
WZA BARRise: 8.5
Width: 28 Upsweep: 2
Backsweep: 11 Weight: 1.65 lbs
Black, flat white or raw*New extra tough Mike Taylor street bar
STEMSRACE STEMFull 7075-T6 top loader stemInternally machinedCNC machined logoHollow stem bolts for bar clampingBlack, grey, polished silver,purple, blue, red or gold280g - 10oz
BLACKNECK STEMFull 7075-T6 front loader stem
Internally machinedCNC machined logo
Hollow stem bolts for bar clampingBlack, grey, polished silver,
purple, blue, red or gold250g 9oz
Female 14mm axleHollow heat treatedCrMo with 3/8 bolts
HUBS
FRONT STREET HUB *BSD Front Street hubguard available seperately
9t DRIVER3 x extra wide pawl springs for increased reliability and noise.
BACK STREET HUB *BSD Back Street hubguard available seperately
9t driver with polymer bushing
Push together assemblycones pull off,
hubguard pushes on
Colours: Black, grey, polished, red, blue, gold and purple.
Female 14mm axleHollow heat treatedCrMo with 3/8 bolts
Male version. Weight: 418g
Male 14mm axleHollow heat treatedCrMo with 7075 nuts
Female version. Weight: 416g
Female 14mm axleHollow heat treatedCrMo with 3/8 bolts
Weight: 245g
6061 T6 shell6061 T6 shell
Angled flangesrecessed spoke holes Angled flanges
Precision sealed6902 Japanese bearings
Precision sealed6902 Japanese bearings
HUBGUARDS
JERSEY BARRIER HUBGUARDHubguards designed specifically for your hub Cassette #1 - for Odyssey, Shadow, WTP and similar 14mm hubsCassette #2 - for Primo Mix onlyCassette #3 - for Profile and Madera onlyCassette #4 - for BSD Back Street
Front Street - for BSD Front StreetMarmoset - for GSport Marmoset onlyRatchet - for GSport Ratchet onlyVandero2 - for Odyssey Vandero2 only
Cassette #4 Jersey Barrier on BSD Back Street male hub
Cassette #4 Jersey Barrier on BSD Back Street female hub
SEATS & POSTS
SKEET seatFat street Pivotal
Tear resistant KevlarRASTA embroidery
317g 11.2oz
SLINGER seatFat street pivotal Tear resistant KevlarNew pivotal patchEmbossed logo317g 11.2oz
*Barspin friendly
STAMP seatSlim pivotal
Tear resistant KevlarNew pivotal patch
Embossed logo244g - 8.6oz
BLITZED post135mm pivotal seatpost6061 aluminiumBlack, grey, polished silver,purple, blue, red or gold3.5oz/100g
SUPERLITE SPROCKETSuper tough 7075 aluminium construction8mm thick at the edge for strength6mm thick in the centre to save weightCentre bore 15/16(comes with 19mm and 22mm steel adaptors)Black, grey, polished, purple, blue, red or gold
Weight :23t - 54g25t - 70g28t - 90g29t - 94g30t - 98g
SPROCKETS
SUPERLITE BBMid or SpanishFully CNCd 6061 aluminium spacersSealed precison bearingsHollow crank arm bolt19mm or 22mm versionsBlack, grey, silver, purple, blue, red or gold
INTEGRATED HEADSETFully CNC 6061 aluminium new smaller topcapSealed precison bearingsCampy specificationBlack, grey, silver, purple, blue, red or gold
BEARINGS
Antony Lille, San Sebastian, Spain. Photo by Freddy Bermond
www.bsdforever.com