Post on 12-Dec-2021
Shades of blue and grey granite are highlighted by occasional white
quartz veins. Perfect for either modern or traditional applications,
Blue Ridge Dark™ is a textured granite that showcases both weathered
and split faces.
BLU E R I D G E DA R K ™
1
1. BLUE RIDGE DARK™ MOSAIC THINSTONE™ 2. BLUE RIDGE DARK™ SQUARE CUT THINSTONE™ 3. OCEAN BLUE TRAVERTINE VEIN CUT
2
3
*Please Note:Our natural stone products vary in color over time. All stone product photos shown may not be representative of our current stone lots. Request a sample for the current color range available.
www.connecticutstone.com
Milford - 203-882-1000
Stamford - 203-967-2937
Blue Ridge Dark™
Classification: Natural Stone Granite
Quarry Location: USA
Fabrication: Guillotine cut rough edge-standard production face
Installation Instructions: Standard masonry veneer procedure
Gross material coverage is exclusive of any waste and assumes a standard ¾" joint width. Expect a minimum 10% – 15% waste factor. If standard joint width is less than ¾", then expect a 20% – 25% waste factor.
ThinStone™ is a special cut of our traditional veneer specifically engineered for interior and exterior applications over brick, concrete or plywood. On average, ThinStone™ is up to 5 times thinner than traditional veneer. Less weight results in lower shipping costs, easier installation and minimal to no footing requirements.
ASTM DATA: Average results for ASTM tests C-170
Density (lbs. / CF)
Water AbsorptionCompressive
Strength Perpendicular
Compressive Strength Parallel
Modulus of Rupture
Bulk Specific Gravity
159.74 0.70% 12,920 PSI 6,920 PSI 2,340 —
Pattern Bed Depth Coverage (Average) Facing Area Sold by
Coping ± 3" to ± 5" ±25 LF per TN 12" x 14" to 18" x 20" TN
Ledge Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 1.5" x 8" to 3" x 20" TN
Mosaic Veneer ± 3.5" to ± 5" ±30 SF per TN 10" x 10" to 18" x 24" TN
Sawn Bed Veneer ± 3" to ± 5" ±30 SF per TN 2" x 8" to 12" x 24" TN
Square Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 6" x 8" to 16" x 18" TN
Strip Cut Veneer ± 3.5" to ± 5" ±30 SF per TN 3" x 8" to 5" x 24" TN
Semi-Square Flagging ± 1.5" to ± 3" ±55 SF per TN 10" x 10" to 18" x 18" TN
Stepping Stones ± 4" to ± 18" — 24" x 24" to 36" x 48" TN
Wallstone ± 2" to ± 14" ±15 CF per TN 6" x 6" to 18" x 18" TN
Pattern Bed Depth Facing Area Sold by Pallet Size
Ledge Cut Veneer .75" to 1.25" 1" x 3" to 4" x 13" SF 100 or 240 SF
Mosaic Veneer .75" to 1.25" 6" x 6" to 12" x 18" SF 100 or 240 SF
Square Cut Veneer .75" to 1.25" 4" x 4" to 12" x 18" SF 100 or 240 SF
Strip Cut Veneer .75" to 1.25" 3" x 6" to 6" x 16" SF 100 or 240 SF
Corners .75" to 1.25" 3" to 12" Returns LF 50 or 100 LF