Post on 26-Jun-2020
Equipment Manufacturer
RB-1010
Block Party
Equipment Manufacturer
RB-1010
Block Party
0.5 1.0
05'
Meters2.0 3.0
10'
32'-10"
[10.01M]
6'-1"
[1.85M]
6'-1"
[1.85M]
31'-7"
[9.64M]
6'
[1.83M]
6'
[1.84M]
6'
[1.84M]
6'-4"
[1.92M]
6'
[1.84M]
6'-5"
[1.96M]
6'-2"
[1.87M]
6'-1"
[1.85M]
ROCKBLOCKS
60" (1,53M)
ENDWALL
ROCKBLOCKS
HOOPS
CLIMBER
ROCKBLOCKS
ZIG-ZAG
SLIDE
ROCKBLOCKS
84" (2,13M)
ENDWALL
HELIX
CLIMBER
CRISS-CROSS
CLIMBER
OUTRIGGER
OUTRIGGER
ROCKBLOCKS
90° WALL
(84" tO60")
(2,13M to 1,53M)
PLAYWORLD SYSTEMS, INC.
1000 Buffalo Road
Lewisburg, PA
17837-9795 USA
BPaper Size
DATE:
SCALE:PROJECT NO:
*PLAYGROUND SUPERVISION REQUIRED
DRAWN BY:
USER CAPACITY: AGE GROUP:
AREA: PERIMETER:
EQUIPMENT SIZE:
USE ZONE:
FALL HEIGHT:
CPSC #325ASTM F1487-
BLO
CK
PA
RTY
CA
TA
LO
G P
RE
-D
ES
IG
N
RB-1010H 1/4"=1'-0"
M. MERTZ
10-NOV-17
20'10" x 19'7" x 9'6,35M x 5,97M x 2,74
32'10" x 31'7"10,01M x 9,84M
837 SqFt.77.67 SqM.
107 Ft.32,61M
9 Ft.2,74M
20 5-12
17
0.5 1.0
05'
Meters2.0 3.0
10'
32'-10"
[10.01M]
6'-1"
[1.85M]
6'-1"
[1.85M]
31'-7"
[9.64M]
6'
[1.83M]
6'
[1.84M]
6'
[1.84M]
6'-4"
[1.92M]
6'
[1.84M]
6'-5"
[1.96M]
6'-2"
[1.87M]
6'-1"
[1.85M]
1
11
2
10
4
12
99
4
6
3
8
3
5
7
PLAYWORLD SYSTEMS, INC.
1000 Buffalo Road
Lewisburg, PA
17837-9795 USA
BPaper Size
DATE:
SCALE:PROJECT NO:
*PLAYGROUND SUPERVISION REQUIRED
DRAWN BY:
USER CAPACITY: AGE GROUP:
AREA: PERIMETER:
EQUIPMENT SIZE:
USE ZONE:
FALL HEIGHT:
CPSC #325ASTM F1487-
BLO
CK
PA
RTY
CA
TA
LO
G P
RE
-D
ES
IG
N
RB-1010H 1/4"=1'-0"
M. MERTZ
10-NOV-17
20'10" x 19'7" x 9'6,35M x 5,97M x 2,74
32'10" x 31'7"10,01M x 9,84M
837 SqFt.77.67 SqM.
107 Ft.32,61M
9 Ft.2,74M
20 5-12
17
DATE:
SCALE:
DRAWN BY:
SPIRAL SLIDE CENTER POST FOOTING (DETAIL1)
SUPPORT POST FOOTING (DETAIL 1 or 4) INDICATES POST LENGTH)
CANTILEVER, "T" POST, AND COMPONENTPOST FOOTING (DETAIL 2)
(ZZCH1850 INDICATES PART NUMBER)
GROUND ZERO POST FOOTING (DETAIL 2) INDICATES POST LENGTH)
COMPONENT FOOTING (DETAIL 3)
(112"
(144"
ROCKBLOCKS
CONFIGURATION
12"
31"83"
77"
33"
99"
34"
54"
28"
63"
22"
22"
99"
34"
103"
21"
23"
8"
4"
64"
63"
28"
35"
72"
92"
147"
PLAYWORLD SYSTEMS, INC.
1000 Buffalo Road
Lewisburg, PA
17837-9795 USA
BPaper Size
DATE:
SCALE:PROJECT NO:
*PLAYGROUND SUPERVISION REQUIRED
DRAWN BY:
FOOTING LEGEND
1
1
2
"
1
8
5
0
Z
Z
C
H
1
4
4
"
G
Z
SPIRAL SLIDE CENTER POST FOOTING (DETAIL1)
SUPPORT POST FOOTING (DETAIL 1 or 4)(112" INDICATES POST LENGTH)
CANTILEVER, "T" POST, AND COMPONENTPOST FOOTING (DETAIL 2)
(ZZCH1850 INDICATES PART NUMBER)
GROUND ZERO POST FOOTING (DETAIL 2)(144" INDICATES POST LENGTH)
COMPONENT FOOTING (DETAIL 3)
BLO
CK
PA
RTY
CA
TA
LO
G P
RE
-D
ES
IG
N
RB-1010H 1/4"=1'-0"
M. MERTZ
10-NOV-17
Slides
ZZUN8238 11 ROCKBLOCKS ZIGZAG SLIDE
Climbers
ZZUN0177 12 ROCKBLOCKS Z SUPPORT (84in WALL)
ZZUN0178 23 ROCKBLOCKS END SUPPORT (60in WALL)
ZZUN0179 24 ROCKBLOCKS END SUPPORT (84in WALL)
ZZUN8360 15 ROCKBLOCKS END WALL (60in)
ZZUN8370 16 ROCKBLOCKS 90 DEGREE WALL (84in TO 60in) RIGHT
ZZUN8389 17 THE CRISS CROSS (84in WALL)
ZZUN8417 18 THE HELIX (60in & 84in WALL)
ZZUN8429 29 THE OUTRIGGER
Ground Zer0 Climbers
ZZUN8236 110 ROCKBLOCKS END WALL (84in)
ZZUN8237 111 ROCKBLOCKS ARCH W/ DECK
ZZUN8239 112 ROCKBLOCKS HOOPS CLIMBER
Additional Tool & Maintenance Kits
ZZCHGUID 113 CHALLENGER GUIDELINES
ZZUN9910 114 SURFACING WARNING LABEL KIT
ZZUN9930 115 PIPE SYSTEMS MAINTENANCE KIT W/ AEROSOL
Part No. Description
Design Number: RB-1010H - Bill Of Material
Block Party
Ref.No. Quantity
Friday, November 10, 2017 Page of1 1 Playworld.com
CertifiedZZUN82381 ROCKBLOCKS ZIGZAG SLIDE 1 139.30 572 2 2.00 0.03 1
CertifiedZZUN01772 ROCKBLOCKS Z SUPPORT (84in WALL)1 39.41 56 0 1.00 0.13 0
CertifiedZZUN01783 ROCKBLOCKS END SUPPORT (60in WALL)2 61.24 91 0 2.00 0.26 0
CertifiedZZUN01794 ROCKBLOCKS END SUPPORT (84in WALL)2 76.72 118 0 2.00 0.26 0
CertifiedZZUN83605 ROCKBLOCKS END WALL (60in) 1 76.13 405 2 1.00 0.13 1
CertifiedZZUN83706 ROCKBLOCKS 90 DEGREE WALL (84in TO 60in) RIGHT
1 108.96 843 4 0.50 0.00 1
CertifiedZZUN83897 THE CRISS CROSS (84in WALL) 1 182.50 1,802 4 3.00 0.06 1
CertifiedZZUN84178 THE HELIX (60in & 84in WALL) 1 73.35 101 2 0.75 0.00 1
CertifiedZZUN84299 THE OUTRIGGER 2 47.78 92 0 1.00 0.00 0
CertifiedZZUN823610 ROCKBLOCKS END WALL (84in) 1 103.89 551 3 1.00 0.13 1
CertifiedZZUN823711 ROCKBLOCKS ARCH W/ DECK 1 201.50 967 2 1.00 0.00 1
CertifiedZZUN823912 ROCKBLOCKS HOOPS CLIMBER 1 46.47 119 1 2.00 0.06 1
N/AZZCHGUID13 CHALLENGER GUIDELINES 1 0.00 1 0 0.25 0.00 0
CertifiedZZUN991014 SURFACING WARNING LABEL KIT 1 0.05 1 0 0.25 0.00 0
N/AZZUN993015 PIPE SYSTEMS MAINTENANCE KIT W/ AEROSOL
1 90
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Design Number: RB-1010H - Compliance and Technical Data
Block Party
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
69 156 5,808 20 17.75 1.061,157.30 8Totals:
6 Metric Tons70 Kg31 Kg520.79 Kg 0.81 m3
Friday, November 10, 2017 Page of1 2 Playworld.com
DescriptionConcrete
(Yds3)
TotalWeight
(lbs) Users
Design Number: RB-1010H - Compliance and Technical Data
Block Party
Pre-Consumer
Recycled Content(lbs)
CO2eFootprint
(kgs)InstallHours
Ref.No.
Reference Document: ASTM F1487
UnitASTMStatus
ActivePlay
Events
Post-
Part No. Qty.
The lay-out for this custom playscape, design number RB-1010H, has been configured to meet the requirements of the ASTM F1487 standard. In addition, each of the above components listed as "Certified" have been tested and are IPEMA certified. Components listed as "Not Applicable" do not fall within the scope of the ASTM F1487 standard and have not been tested. IPEMA certification can be verified on the IPEMA website, www.ipema.org. In the interest of playground safety, IPEMA provides a Third Party Certification Service which validates compliance.
The CO2e (carbon footprint given in Kilograms and Metric Tons) listed above is a measure of the environmental impact this play structure represents from harvesting raw materials to the time it leaves our shipping dock. Playworld Systems nurtures a total corporate culture that is focused on eliminating carbon producing processes and products, reducing our use of precious raw materials, reusing materials whenever possible and recycling materials at every opportunity. Playworld Systems elected to adopt the Publicly Available Specification; PAS 2050 as published by the British Standards Institute and sponsored by Defra and the Carbon Trust. The PAS 2050 has gained international acceptance as a specification that measures the greenhouse gas emissions in services and goods throughout their entire life cycle.
The lay-out was also designed to meet the 2010 Standards published 15-Sep-2010, by the Department of Justice when installed over a properly maintained surfacing material that is in compliance with ASTM F1951 "Accessibility of Surface Systems Under and Around Playground Equipment" as well as ASTM F1292, "Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment", appropriate for the fall height of the structure.
Installation times are based on one experienced installer. A crew of three experienced individuals can perform the installation within the given time, each member working 1/3 of the given hours. [Eg. Installation Time = 30 hours. For a crew of three, each member will work 10 hours on the installation for a total of 30 hours on the project.]
A measurement, in pounds, that qualifies the amount of material that was captured as waste and diverted from landfill during an initial manufacturing process and is being redirected to a separate manufacturing process to become a different product. E.g. 100% of our Aluminum Tubing is made from captured waste material during the manufacturing process of extruded Aluminum products such as rods, flat bars and H-channels.
A measurement, in pounds, that qualifies the amount of material that was once another product that has completed its lifecycle and has been diverted from a landfill as a solid waste through recycling and is now being used in a Playworld Systems' product. E.g. **20% to 40% of the steel in our steel tubing and sheet steel have been diverted from landfills. Automobiles are scrapped and recyclable steel is purchased by the steel mill that produces our raw product.** The amount of Post-Consumer recycled steel fluctuates daily based on the availability of the recycled steel.
ASTM F1487
2010 ADA Standards for Accessible Design
Installation Times
Carbon Footprint
Pre-Consumer Recycle Content
Post-Consumer Recycle Content
Friday, November 10, 2017 Page of2 2 Playworld.com