Basic Configuration Access Point Rocket M2

Discuss in this topic

1) The device used2) Set up Access Point 3) Main Node Configuration Access Point 4) Sub Node Configuration Access Point 5) Connection Test6) Troubleshoot

1) The device used

1. 1 unit PC/Laptop2. 1 unit Access Point Ubiquiti Rocket M23. 2 unit Network Cable LAN4. 1 unit Power Cable5. 1 unit POE Adapter6. 1 unit Antenna Sectorial/Omni

Access Point Main Node Access Point Sub Node

2) Set upAccess Point - Rocket M2

1. Download ubnt discovery tool from Ubiquiti (optional) (http://www.ubnt.com/downloads/discovery/ubnt-discovery-v2.3.zip)

2. Extract ubnt-discovery-v2.3.zip.

3. Plug in first network cable from laptop to LAN port at POE adapter4. Plug in second network cable from Rocket M2 AP to POE port at POE adapter

MAIN NODE

2) Main Node Configuration Access Point - Rocket M2

1. By default Rocket M2 IP address is 192.168.1.20. Set Laptop to static IP TCP/IPv4 Set – 192.168.1.22 as Laptop IP Address Set – 255.255.255.0 as Subnet Mask Set - 192.168.1.20 as Default Getaway

2. Open browser and type Rocket M2 IP address 192.168.1.20. Default username and password:

Username - ubnt Password - ubnt * for the first time or after reset to factory default

o Country –United Stateo Language - Englisho I agree to these terms of use – Ticko Click button “Login”

3. Click WIRELESS menu Wireless Mode – Access Point SSID – KG WIFI <site name>eg. KG WIFI FELDA MEMPAGA 3 A (for AP

sectorial A) Channel Width – 20 MHz Antenna Gain – 15 dBi Output Power – 24 dBm Click on button “Change” and “Apply” to save configuration

4. Click NETWORK menu Set – 10.16.9.2 as IP address (sectorial AP A for main node) Set – 255.255.255.224 as Netmask (main node using /27) Set – 10.16.9.1 as Gateway IP (router IP address) Click on button “Change” and “Apply” to save configuration

5. Re-insert address is 10.16.9.2. Set Laptop to static IP TCP/IPv4 Set – 10.16.9.10 as Laptop IP Address Set – 255.255.255.0 as Subnet Mask Set - 10.16.9.1 as Default Getaway

6. Open browser and type Rocket M2 IP address 10.16.9.2 Default username and password:

Username - ubnt Password – ubnt Click button “Login”

7. Click SERVICES menu Set – Enable SNMP Agent Set – PI1M2HOME as SNMP community TBD

Set – FELDA MEMPAGA 3 (refer to which Pi1M) Set – Enable Telnet Server Set – Enable NTP Client Set – 10.10.10.1 as NTP Server TBD Click on button “Change” and “Apply” to save configuration

8. Click SYSTEM menu Upload firmware - click on button “Choose File” and “Select” file XM-

v5.5.build12536.bin and click button “Open”

Click button ”Upload”

Click button ”Update”

Wait until finish uploading

Firmware Version: XM.v5.5 is successful update

Set – Device name “AP Main Node 1” TBDo Click key icon for change new password

Set - Administrator Username:Admin Set – Current Password : ubnt Set - New Password: m5d1t383 Set - Verify New Password : m5d1t383 Click on button “Change” and “Apply” to save configuration

Configuration main node is complete

Figure 1: The final installation Access Point (x3) sectorial in main node

SUB NODE

3) Sub Node Configuration Access Point - Rocket M2

1. By default Rocket M2 IP address is 192.168.1.20. Set Laptop to static IP TCP/IPv4 Set – 192.168.1.22 as Laptop IP Address Set – 255.255.255.0 as Subnet Mask Set - 192.168.1.20 as Default Getaway

2. Open browser and type Rocket M2 IP address 192.168.1.20. Default username and password:

Username - ubnt Password - ubnt * for the first time or after reset to factory default

o Country – United Stateo Language - Englisho I agree to these terms of use – Ticko Click button “Login”

3. Click WIRELESS menu Wireless Mode – Access Point SSID – KTW WIFI ZON A/ZON B/ZON C Channel Width – 20 MHz Antenna Gain – 13dBi Output Power – 24 dBm Click on button “Change” and “Apply” to save configuration

4. Click NETWORK menu

Set – 10.21.9.60 as IP address (Omni AP A for sub node) Set – 255.255.255.224 as Netmask (main node using /27) Set – 10.21.9.65 as Gateway IP (briging IP address) Click on button “Change” and “Apply” to save configuration

5. Re-insert address is 10.16.9.2. Set Laptop to static IP TCP/IPv4 Set – 10.21.9.60 as Laptop IP Address Set – 255.255.255.0 as Subnet Mask Set - 10.21.9.60 as Default Getaway

6. Open browser and type Rocket M2 IP address 0.21.9.60 Default username and password:

Username - ubnt Password – ubnt Click button “Login”

7. Click SERVICES menu Set – Enable SNMP Agent Set – PI1M2HOME as SNMP community TBD

Set – FELDA MEMPAGA 3 (refer to which Pi1M) Set – Enable Telnet Server Set – Enable NTP Client Set – 10.10.10.1 as NTP Server TBD Click on button “Change” and “Apply” to save configuration

8. Click SYSTEM menu Upload firmware - click on button “Choose File” and “Select” file XM-

v5.5.build12536.bin and click button “Open”

Click button ”Upload”

Click button ”Update”

Wait until finish uploading

Firmware Version: XM.v5.5 is successful update

Set – Device name “AP Main Node 1” TBD

o Click key icon for change new password Set – Current Password : ubnt Set - Administrator Username:Admin Set - New Password: m5d1t383 Set - Verify New Password : m5d1t383 Click on button “Change” and “Apply” to save configuration

Configuration sub node is complete

Figure 2: The final installation Access Point (x4) omni in sub node

4) Connection Test

1. Plug in first network cable from laptop to LAN port at POE adapter2. Change laptop IP address same with NanoBridge M5 IP segment3. On PC/Laptop run command prompt

a. Windows = Start>run> type “cmd” > hit Enter

4. Ping 10.16.9.98 (main node / sub node IP Address) to NanoBridge M5 IP address to see the connection between laptop and AP

5) Troubleshoot

1. Cannot detect NanoBridge M5 IP address Open ubnt-discovery.bat and wait until it show AP detail including IP

address and MAC address

2. How to reboot device Click on button “Reboot”and button “Yes, reboot!”

Wait for a while until finish rebooting device

3. How to backup configuration device Click on button “Download”

Save the file

4. How to upload configuration Click on button “Choose File”

Click on button “Upload”

Click on button “Apply” to save configuration

5. How to reset to factory default device

Click SYSTEM menu and click Reset button at Reset to Factory Default

Wait until Rocket M2 AP reboot completely

By default IP Address is 192.168.1.20