Post on 25-Jul-2020
21/05/19 Laboratorio Tecnologie Biomediche 1
Computer Aided ManufacturingAutodesk® Fusion 360
Example 1
21/05/19 Laboratorio Tecnologie Biomediche 2
Open Manufacture
21/05/19 Laboratorio Tecnologie Biomediche 3
Create a new setup
21/05/19 Laboratorio Tecnologie Biomediche 4
Define model, coordinate system, fixtures and stock dimensions
21/05/19 Laboratorio Tecnologie Biomediche 5
21/05/19 Laboratorio Tecnologie Biomediche 6
Define model, coordinate system, fixtures and stock dimensions
3D Adaptive Clearing
21/05/19 Laboratorio Tecnologie Biomediche 7
Select tool
21/05/19 Laboratorio Tecnologie Biomediche 8
Select stock contours, heights and stock to leave
21/05/19 Laboratorio Tecnologie Biomediche 9
21/05/19 Laboratorio Tecnologie Biomediche 10
Select stock contours, heights and stock to leave
Simulation
21/05/19 Laboratorio Tecnologie Biomediche 11
Surface finishing: Parallel
21/05/19 Laboratorio Tecnologie Biomediche 12
Select geometry
21/05/19 Laboratorio Tecnologie Biomediche 13
• Duplicate current Parallel finishing• Change ‘Pass direction’ in ‘Passes’ tab to 45°
21/05/19 Laboratorio Tecnologie Biomediche 14
Surface finishing: Parallel
Surface finishing: scallop
21/05/19 Laboratorio Tecnologie Biomediche 15
Export code
21/05/19 Laboratorio Tecnologie Biomediche 16
Select machine and generate code
21/05/19 Laboratorio Tecnologie Biomediche 17
Example 2
21/05/19 Laboratorio Tecnologie Biomediche 18
2D à Face (remove stock top offset)
21/05/19 Laboratorio Tecnologie Biomediche 19
2D contour: tabs
21/05/19 Laboratorio Tecnologie Biomediche 20
2D contour: multiple dephts and ramp
21/05/19 Laboratorio Tecnologie Biomediche 21
Create new setup and change coordinate system
21/05/19 Laboratorio Tecnologie Biomediche 22
Paralle finishing
21/05/19 Laboratorio Tecnologie Biomediche 23
Drill (chip breaking)
21/05/19 Laboratorio Tecnologie Biomediche 24
Roland SRM-20 Desktop Milling Machine
21/05/19 Laboratorio Tecnologie Biomediche 25
21/05/19 Laboratorio Tecnologie Biomediche 26