Post on 06-Jun-2020
ArtiosCAD
Style Catalog Reference
ArtiosCAD
ii
Contents
1. Location and Copyright..........................................................................................................................................................12
2. Welcome........................................................................................................................................................................................ 14
2.1 Introduction........................................................................................................................................................................14
3. Corrugated Standards.............................................................................................................................................................15
3.1 One piece containers/1 side rollovers....................................................................................................................15
3.1.1 31010W - 1 side rollover - Cover flaps.....................................................................................................15
3.1.2 31015W - 1 side rollover - Cover flaps & lock.......................................................................................15
3.1.3 31020W - 1 side rollover - Ears...................................................................................................................17
3.1.4 31025W - 1 side rollover - Ears & lock.....................................................................................................18
3.1.5 31026W - 1 side rollover - Ears & lock/dust flaps off cover............................................................. 19
3.1.6 31021W - 1 side rollover - Ears / dust flaps off cover........................................................................ 19
3.2 One piece containers/2 side rollovers....................................................................................................................21
3.2.1 32015W - 2 side rollover - Cover flaps.....................................................................................................21
3.2.2 32025W - 2 side rollover - Cover flaps & ears.......................................................................................22
3.2.3 32030W - 2 side rollover - Cover panels meet......................................................................................23
3.2.4 32035W - 2 side rollover - Cover panels meet/with flaps..................................................................25
3.2.5 32020W - 2 side rollover - Ears...................................................................................................................26
3.2.6 32010W - 2 side rollover - Tuck.................................................................................................................. 28
3.3 One piece containers/3 side rollovers....................................................................................................................29
3.3.1 71035W - 3 side rollover - Angled side/header slots.......................................................................... 29
3.3.2 33015W - 3 side rollover - Cover flaps.....................................................................................................31
3.3.3 33010W - 3 side rollover - Tuck.................................................................................................................. 32
3.4 One piece containers/Center joint........................................................................................................................... 34
3.4.1 36025W - Center joint - With dust & cover flaps..................................................................................34
3.4.2 36020W - Center joint - With dust flaps.................................................................................................. 35
3.4.3 36010W - Center joint - Without dust flaps............................................................................................ 37
3.5 One piece containers/Swing-in rollover.................................................................................................................38
3.5.1 34011W - Swing-in rollover........................................................................................................................... 38
3.5.2 34020W - Swing-in rollover........................................................................................................................... 40
3.5.3 34010W - Swing-in rollover - Tuck............................................................................................................. 41
3.6 One piece containers/Wrap around.........................................................................................................................42
3.6.1 36030W - Wrap-around - Tuck with optional lock................................................................................42
3.6.2 36035W - Wrap-around - Tuck/cover flaps/optional lock.................................................................. 43
3.7 Trays..................................................................................................................................................................................... 44
3.7.1 71035W - Trays - Angled side/with header slots.................................................................................. 44
3.7.2 42020W - Trays - Four side rollover...........................................................................................................46
3.7.3 42030W - Trays - Preglued infold............................................................................................................... 47
3.7.4 42035W - Trays - Preglued outfold............................................................................................................ 48
Contents
iii
3.7.5 42010W - Trays - Two side rollover............................................................................................................49
3.8 FEFCO Standards - 200 Series................................................................................................................................ 50
3.8.1 F0200.......................................................................................................................................................................50
3.8.2 F0201.......................................................................................................................................................................52
3.8.3 F0202.......................................................................................................................................................................53
3.8.4 F0203.......................................................................................................................................................................55
3.8.5 F0204.......................................................................................................................................................................56
3.8.6 F0205.......................................................................................................................................................................58
3.8.7 F0206.......................................................................................................................................................................59
3.8.8 F0208.......................................................................................................................................................................61
3.8.9 F0209.......................................................................................................................................................................62
3.8.10 F0210.................................................................................................................................................................... 64
3.8.11 F0211.................................................................................................................................................................... 66
3.8.12 F0212.................................................................................................................................................................... 67
3.8.13 F0214.................................................................................................................................................................... 69
3.8.14 F0215.................................................................................................................................................................... 71
3.8.15 F0216.................................................................................................................................................................... 73
3.8.16 F0217.................................................................................................................................................................... 75
3.8.17 F0225.................................................................................................................................................................... 76
3.8.18 F0226.................................................................................................................................................................... 78
3.8.19 F0227.................................................................................................................................................................... 80
3.8.20 F0228.................................................................................................................................................................... 81
3.8.21 F0229.................................................................................................................................................................... 82
3.8.22 F0230.................................................................................................................................................................... 84
3.8.23 F0231.................................................................................................................................................................... 85
3.9 FEFCO Standards - 300 Series................................................................................................................................ 87
3.9.1 F0300 Base...........................................................................................................................................................87
3.9.2 F0300 Lid...............................................................................................................................................................88
3.9.3 F0301 Base...........................................................................................................................................................90
3.9.4 F0301 Base...........................................................................................................................................................91
3.9.5 F0301 Lid...............................................................................................................................................................93
3.9.6 F0302 Base...........................................................................................................................................................95
3.9.7 F0302 Lid...............................................................................................................................................................97
3.9.8 F0303 Base...........................................................................................................................................................99
3.9.9 F0303 Lid............................................................................................................................................................ 101
3.9.10 F0304 Base......................................................................................................................................................103
3.9.11 F0304 Lid..........................................................................................................................................................105
3.9.12 F0306 Base......................................................................................................................................................107
3.9.13 F0306 Lid..........................................................................................................................................................109
3.9.14 F0308 Base......................................................................................................................................................111
3.9.15 F0308 Lid..........................................................................................................................................................113
3.9.16 F0309 Base......................................................................................................................................................115
3.9.17 F0309 Lid..........................................................................................................................................................117
ArtiosCAD
iv
3.9.18 F0310 Body..................................................................................................................................................... 119
3.9.19 F0310 Cover....................................................................................................................................................121
3.9.20 F0311 Body..................................................................................................................................................... 123
3.9.21 F0311 Cover....................................................................................................................................................124
3.9.22 F0312 Body..................................................................................................................................................... 126
3.9.23 F0312 Cover....................................................................................................................................................128
3.9.24 F0313 Body..................................................................................................................................................... 129
3.9.25 F0313 Cover....................................................................................................................................................131
3.9.26 F0314a............................................................................................................................................................... 132
3.9.27 F0320 Body..................................................................................................................................................... 134
3.9.28 F0320 Cover....................................................................................................................................................135
3.9.29 F0321 Body..................................................................................................................................................... 137
3.9.30 F0321 Cover....................................................................................................................................................138
3.9.31 F0325 Body..................................................................................................................................................... 140
3.9.32 F0325 Cover....................................................................................................................................................141
3.9.33 F0330..................................................................................................................................................................143
3.9.34 F0351a............................................................................................................................................................... 144
3.9.35 F0351b...............................................................................................................................................................146
3.10 FEFCO Standards - 400 Series........................................................................................................................... 148
3.10.1 F0401..................................................................................................................................................................148
3.10.2 F0402..................................................................................................................................................................150
3.10.3 F0403..................................................................................................................................................................151
3.10.4 F0404 Body..................................................................................................................................................... 153
3.10.5 F0404 Caps..................................................................................................................................................... 155
3.10.6 F0405 Body..................................................................................................................................................... 156
3.10.7 F0405 Caps..................................................................................................................................................... 158
3.10.8 F0406..................................................................................................................................................................159
3.10.9 F0409..................................................................................................................................................................161
3.10.10 F0410............................................................................................................................................................... 163
3.10.11 F0411............................................................................................................................................................... 164
3.10.12 F0412............................................................................................................................................................... 165
3.10.13 F0413............................................................................................................................................................... 167
3.10.14 F0415............................................................................................................................................................... 169
3.10.15 F0416............................................................................................................................................................... 171
3.10.16 F0420............................................................................................................................................................... 172
3.10.17 F0421............................................................................................................................................................... 174
3.10.18 F0422............................................................................................................................................................... 175
3.10.19 F0423............................................................................................................................................................... 177
3.10.20 F0424............................................................................................................................................................... 178
3.10.21 F0425............................................................................................................................................................... 179
3.10.22 F0426............................................................................................................................................................... 181
3.10.23 F0427............................................................................................................................................................... 182
3.10.24 F0428............................................................................................................................................................... 184
Contents
v
3.10.25 F0429............................................................................................................................................................... 186
3.10.26 F0430............................................................................................................................................................... 188
3.10.27 F0435............................................................................................................................................................... 189
3.10.28 F0440............................................................................................................................................................... 191
3.10.29 F0441............................................................................................................................................................... 193
3.10.30 F0442............................................................................................................................................................... 194
3.10.31 F0443............................................................................................................................................................... 196
3.10.32 F0444............................................................................................................................................................... 198
3.10.33 F0447............................................................................................................................................................... 199
3.10.34 F0450............................................................................................................................................................... 201
3.10.35 F0451............................................................................................................................................................... 203
3.10.36 F0452............................................................................................................................................................... 205
3.10.37 F0453............................................................................................................................................................... 207
3.10.38 F0454............................................................................................................................................................... 209
3.10.39 F0455............................................................................................................................................................... 211
3.10.40 F0456............................................................................................................................................................... 213
3.10.41 F0458............................................................................................................................................................... 215
3.10.42 F0459............................................................................................................................................................... 217
3.10.43 F0460............................................................................................................................................................... 218
3.10.44 F0470............................................................................................................................................................... 220
3.10.45 F0471............................................................................................................................................................... 222
3.10.46 F0472............................................................................................................................................................... 224
3.10.47 F0473............................................................................................................................................................... 226
3.11 FEFCO Standards - 500 Series........................................................................................................................... 228
3.11.1 F0501..................................................................................................................................................................228
3.11.2 F0502..................................................................................................................................................................230
3.11.3 F0503..................................................................................................................................................................230
3.11.4 F0510 Body..................................................................................................................................................... 231
3.11.5 F0510 End Panel...........................................................................................................................................232
3.11.6 F0511 Body..................................................................................................................................................... 233
3.11.7 F0511 End Panel...........................................................................................................................................235
3.11.8 F0512 Body..................................................................................................................................................... 236
3.11.9 F0512 End Panel...........................................................................................................................................238
3.12 FEFCO Standards - 600 Series........................................................................................................................... 239
3.12.1 F0601 Body..................................................................................................................................................... 239
3.12.2 F0601 End Panel...........................................................................................................................................240
3.12.3 F0602 Body..................................................................................................................................................... 242
3.12.4 F0602 End Panel...........................................................................................................................................243
3.12.5 F0605 Body..................................................................................................................................................... 245
3.12.6 F0605 End Panel...........................................................................................................................................246
3.12.7 F0606..................................................................................................................................................................248
3.12.8 F0606a............................................................................................................................................................... 249
3.12.9 F0606b...............................................................................................................................................................251
ArtiosCAD
vi
3.12.10 F0607 Body...................................................................................................................................................253
3.12.11 F0607 End Panel.........................................................................................................................................255
3.12.12 F0608 Body...................................................................................................................................................256
3.12.13 F0608 End Panel.........................................................................................................................................258
3.12.14 F0610 Body...................................................................................................................................................259
3.12.15 F0610 End Panel.........................................................................................................................................261
3.12.16 F0615............................................................................................................................................................... 262
3.12.17 F0615a.............................................................................................................................................................264
3.12.18 F0615b............................................................................................................................................................ 266
3.12.19 F0616 Body...................................................................................................................................................268
3.12.20 F0616 End Panel.........................................................................................................................................269
3.12.21 F0620 Body...................................................................................................................................................270
3.12.22 F0620 End Panel.........................................................................................................................................272
3.12.23 F0621............................................................................................................................................................... 273
3.13 FEFCO Standards - 700 Series........................................................................................................................... 275
3.13.1 F0700..................................................................................................................................................................275
3.13.2 F0711..................................................................................................................................................................276
3.13.3 F0712..................................................................................................................................................................278
3.13.4 F0713..................................................................................................................................................................279
3.13.5 F0718..................................................................................................................................................................280
3.13.6 F0747..................................................................................................................................................................282
3.13.7 F0748..................................................................................................................................................................284
3.13.8 F0752..................................................................................................................................................................285
3.13.9 F0759..................................................................................................................................................................287
3.13.10 F0760............................................................................................................................................................... 289
3.13.11 F0761............................................................................................................................................................... 291
3.14 FEFCO Standards - 900 Series........................................................................................................................... 293
3.14.1 F0900..................................................................................................................................................................293
3.14.2 F0901..................................................................................................................................................................293
3.14.3 F0902..................................................................................................................................................................294
3.14.4 F0903..................................................................................................................................................................294
3.14.5 F0904..................................................................................................................................................................295
3.14.6 F0905..................................................................................................................................................................296
3.14.7 F0906..................................................................................................................................................................297
3.14.8 F0907..................................................................................................................................................................298
3.14.9 F0908..................................................................................................................................................................298
3.14.10 F0909............................................................................................................................................................... 299
3.14.11 F0910............................................................................................................................................................... 300
3.14.12 F0911............................................................................................................................................................... 301
3.14.13 F0912............................................................................................................................................................... 302
3.14.14 F0913............................................................................................................................................................... 303
3.14.15 F0920............................................................................................................................................................... 305
3.14.16 F0921............................................................................................................................................................... 305
Contents
vii
3.14.17 F0929 Length Partition............................................................................................................................. 306
3.14.18 F0929 Width Partition............................................................................................................................... 308
3.14.19 F0930 Length Partition............................................................................................................................. 309
3.14.20 F0930 Width Partition............................................................................................................................... 311
3.14.21 F0931 Length Partition............................................................................................................................. 312
3.14.22 F0931 Width Partition............................................................................................................................... 314
3.14.23 F0932 Length Partition............................................................................................................................. 315
3.14.24 F0932 Width Partition............................................................................................................................... 316
3.14.25 F0933 Length Partition............................................................................................................................. 317
3.14.26 F0933 Width Partition............................................................................................................................... 319
3.14.27 F0934 Length Partition............................................................................................................................. 320
3.14.28 F0934 Width Partition............................................................................................................................... 321
3.14.29 F0935 Divider............................................................................................................................................... 323
3.14.30 F0935 Length Partition............................................................................................................................. 324
3.14.31 F0935 Width Partition............................................................................................................................... 325
3.14.32 F0940............................................................................................................................................................... 327
3.14.33 F0941............................................................................................................................................................... 327
3.14.34 F0942............................................................................................................................................................... 328
3.14.35 F0943............................................................................................................................................................... 330
3.14.36 F0944............................................................................................................................................................... 331
3.14.37 F0945............................................................................................................................................................... 332
3.14.38 F0946............................................................................................................................................................... 333
3.14.39 F0947............................................................................................................................................................... 334
3.14.40 F0948............................................................................................................................................................... 335
3.14.41 F0949............................................................................................................................................................... 337
3.14.42 F0950............................................................................................................................................................... 338
3.14.43 F0951............................................................................................................................................................... 340
3.14.44 F0965............................................................................................................................................................... 341
3.14.45 F0966............................................................................................................................................................... 342
3.14.46 F0967............................................................................................................................................................... 343
3.14.47 F0970............................................................................................................................................................... 344
3.14.48 F0971............................................................................................................................................................... 345
3.14.49 F0972............................................................................................................................................................... 346
3.14.50 F0973............................................................................................................................................................... 346
3.14.51 F0974............................................................................................................................................................... 348
3.14.52 F0975............................................................................................................................................................... 349
3.14.53 F0976............................................................................................................................................................... 351
4. Display Standards...................................................................................................................................................................353
4.1 Bins.....................................................................................................................................................................................353
4.1.1 Hexagonal Bin...................................................................................................................................................353
4.1.2 Hexagonal Bin - Dispenser Bottom......................................................................................................... 354
4.1.3 Hexagonal Bin - Dispenser Center...........................................................................................................356
4.1.4 Hexagonal Bin - Header............................................................................................................................... 358
ArtiosCAD
viii
4.1.5 Pallet Base with Cross Lock.......................................................................................................................360
4.1.6 Pallet with Lid....................................................................................................................................................361
4.2 Countertop Displays....................................................................................................................................................362
4.2.1 Angular Card Dispenser................................................................................................................................363
4.2.2 Angular Card Holder.......................................................................................................................................364
4.2.3 Angular Dispenser........................................................................................................................................... 365
4.2.4 Auto Bottom Dispenser.................................................................................................................................366
4.2.5 Card Dispenser With Header...................................................................................................................... 367
4.2.6 Countertop Display With Self Lock.......................................................................................................... 368
4.2.7 Countertop Display With Shelves..............................................................................................................369
4.2.8 One Piece Countertop Display...................................................................................................................370
4.2.9 Straight Card Holder...................................................................................................................................... 371
4.2.10 Tray With Header...........................................................................................................................................372
4.3 Display bases.................................................................................................................................................................373
4.3.1 All side slope base..........................................................................................................................................373
4.3.2 Angle Base End Joint.................................................................................................................................... 374
4.3.3 Angle Base Half Base....................................................................................................................................376
4.3.4 Display Base2- Center Joint Flg1............................................................................................................. 378
4.3.5 Display Base 2-End Joint Flg..................................................................................................................... 380
4.3.6 Display Base 3-End Joint.............................................................................................................................382
4.3.7 Display Base-Center Joint........................................................................................................................... 384
4.3.8 Display Base-End Joint1.............................................................................................................................. 386
4.3.9 Pallet Base..........................................................................................................................................................388
4.3.10 Step Base-End Joint-Flange.....................................................................................................................390
4.4 Display Headers............................................................................................................................................................391
4.4.1 Counter Tray Header 2..................................................................................................................................391
4.4.2 Counter Tray Header 4..................................................................................................................................393
4.4.3 Display Tray Header........................................................................................................................................395
4.4.4 Display Tray Header 2................................................................................................................................... 397
4.5 Display Trays.................................................................................................................................................................. 399
4.5.1 4 Cell Power Wing Tray................................................................................................................................ 399
4.5.2 Display Tray With Dividers........................................................................................................................... 401
4.5.3 Self Ship Double Back.................................................................................................................................. 402
4.5.4 Shelf Displayer1................................................................................................................................................404
4.5.5 Slope Stack Side............................................................................................................................................. 405
4.5.6 SS DBL BTM.....................................................................................................................................................407
4.5.7 SS Lean Front...................................................................................................................................................409
4.5.8 SS SNG Back 1VS..........................................................................................................................................410
4.5.9 SS Tray Double BTM......................................................................................................................................412
4.5.10 SS Tray No Back Double BTM................................................................................................................414
4.5.11 SS Tray Triple BTM.......................................................................................................................................416
4.5.12 SS Tray W Header........................................................................................................................................ 418
4.5.13 Tray with Divider............................................................................................................................................ 421
Contents
ix
4.6 Easels................................................................................................................................................................................ 422
4.6.1 Double Wing Easel..........................................................................................................................................422
4.6.2 Double Wing Easel Small............................................................................................................................. 423
4.6.3 Single Wing Easel............................................................................................................................................425
4.7 Fillers..................................................................................................................................................................................427
4.7.1 5 Panel Roll........................................................................................................................................................427
4.7.2 9 Panel Fill..........................................................................................................................................................429
4.7.3 9 Panel Roll........................................................................................................................................................430
4.7.4 9 Panel unev......................................................................................................................................................431
4.7.5 Bowtie...................................................................................................................................................................432
4.7.6 Patryfl....................................................................................................................................................................433
4.8 Standalone Displays....................................................................................................................................................435
4.8.1 Angular Display with Shelves......................................................................................................................435
4.8.2 Display Base......................................................................................................................................................437
4.8.3 Display Stand.................................................................................................................................................... 438
4.8.4 Display Stand with Trays.............................................................................................................................. 439
5. Folding Carton Standards...................................................................................................................................................440
5.1 Sleeves..............................................................................................................................................................................440
5.1.1 111.01.ARD - Standard sleeve...................................................................................................................440
5.2 Friction tuck tops/bottoms....................................................................................................................................... 441
5.2.1 122.05.ARD - Reverse top tuck on 2nd.................................................................................................441
5.2.2 121.05.ARD - Reverse top tuck on 4th.................................................................................................. 442
5.2.3 123.05.ARD - Straight tuck top on 2nd..................................................................................................444
5.2.4 124.05.ARD - Straight tuck top on 4th...................................................................................................445
5.3 Friction Tuck Tops/Unituck bottom....................................................................................................................... 446
5.3.1 122.01.ARD - Reverse top tuck on 2nd.................................................................................................446
5.3.2 121.01.ARD - Reverse tuck top on 4th.................................................................................................. 448
5.3.3 123.01.ARD - Straight tuck top on 2nd..................................................................................................449
5.3.4 124.01.ARD - Straight tuck top on 4th...................................................................................................450
5.4 Friction tuck tops/Slit lock bottom........................................................................................................................452
5.4.1 122.03.ARD - Reverse top tuck on 2nd.................................................................................................452
5.4.2 121.03.ARD - Reverse tuck top on 4th.................................................................................................. 453
5.4.3 123.03.ARD - Straight tuck top on 2nd..................................................................................................455
5.4.4 124.03.ARD - Straight tuck top on 4th...................................................................................................456
5.5 Friction tuck tops/Houghland bottom.................................................................................................................. 458
5.5.1 141.10.ARD - Tuck on 2nd - Tab on 2nd.............................................................................................. 458
5.5.2 141.04.ARD - Tuck on 2nd - Tab on 4th................................................................................................459
5.5.3 141.07.ARD - Tuck on 4th - Tab on 2nd................................................................................................461
5.5.4 141.01.ARD - Tuck on 4th - Tab on 4th.................................................................................................462
5.6 Friction tuck tops/Full flap auto bottom..............................................................................................................464
5.6.1 151.04.ARD - Tuck top on 2nd..................................................................................................................464
5.6.2 151.01.ARD - Tuck top on 4th...................................................................................................................465
5.7 Friction tuck tops/Inturn auto bottom..................................................................................................................467
ArtiosCAD
x
5.7.1 152.04.ARD - Tuck top on 2nd..................................................................................................................467
5.7.2 152.01.ARD - Tuck top on 4th...................................................................................................................468
5.8 Unituck slit lock top and bottom........................................................................................................................... 469
5.8.1 122.07.ARD - RT top tuck on 2nd........................................................................................................... 469
5.8.2 121.07.ARD - RT top tuck on 4th.............................................................................................................471
5.8.3 123.07.ARD - ST top tuck on 2nd............................................................................................................472
5.8.4 124.07.ARD - ST top tuck on 4th.............................................................................................................474
5.9 Unituck slit lock top/Houghland bottom.............................................................................................................475
5.9.1 141.11.ARD - Tuck on 2nd - tab on 2nd............................................................................................... 475
5.9.2 141.05.ARD - Tuck on 2nd - tab on 4th................................................................................................ 477
5.9.3 141.08.ARD - Tuck on 4th - tab on 2nd................................................................................................ 478
5.9.4 141.02.ARD - Tuck on 4th - tab on 4th..................................................................................................480
5.10 Unituck Slit Lock Top/Full flap auto bottom................................................................................................... 481
5.10.1 151.05.ARD - Tuck top on 2nd............................................................................................................... 481
5.10.2 151.02.ARD - Tuck top on 4th.................................................................................................................483
5.11 Unituck slit lock top/Inturn auto bottom.......................................................................................................... 484
5.11.1 152.05.ARD Tuck top on 2nd...................................................................................................................484
5.11.2 152.02.ARD - Tuck top on 4th.................................................................................................................486
5.12 Standard slit lock top/Standard slit lock bottom.......................................................................................... 487
5.12.1 122.09.ARD - RT top tuck on 2nd.........................................................................................................487
5.12.2 121.09.ARD - RT top tuck on 4th.......................................................................................................... 489
5.12.3 123.09.ARD - ST top tuck on 2nd......................................................................................................... 490
5.12.4 124.09.ARD - ST top tuck on 4th.......................................................................................................... 492
5.13 Standard slit lock top/Houghland bottom........................................................................................................493
5.13.1 141.12.ARD - Tuck on 2nd - tab on 2nd.............................................................................................493
5.13.2 141.06.ARD - Tuck on 2nd - tab on 4th..............................................................................................495
5.13.3 141.09.ARD - Tuck on 4th - tab on 2nd..............................................................................................496
5.13.4 141.03.ARD - Tuck on 4th - tab on 4th............................................................................................... 498
5.14 Standard slit lock top/Full flap auto bottom................................................................................................... 499
5.14.1 151.06.ARD - Tuck on 2nd........................................................................................................................499
5.14.2 151.03.ARD - Tuck on 4th.........................................................................................................................501
5.15 Standard slit lock top/Inturn auto bottom....................................................................................................... 502
5.15.1 152.06.ARD - Tuck top on 2nd panel...................................................................................................502
5.15.2 152.03.ARD - Tuck top on 4th panel.................................................................................................... 504
5.16 Partial/full overlap seal ends................................................................................................................................. 505
5.16.1 131.01.ARD - Flap style #1.......................................................................................................................505
5.16.2 131.04.ARD - Flap style #2.......................................................................................................................507
5.16.3 131.05.ARD - Flap style #3.......................................................................................................................508
5.16.4 131.06.ARD - Flap style #4.......................................................................................................................510
5.16.5 131.07.ARD - Flap style #5.......................................................................................................................511
5.17 Trays/Beers................................................................................................................................................................... 513
5.17.1 222.05.ARD - 6 corner................................................................................................................................513
5.17.2 222.02.ARD - Standard/Full drag........................................................................................................... 514
Contents
xi
5.18 Trays/Brightwoods..................................................................................................................................................... 516
5.18.1 261.01.ARD - Double sidewall/Double endwall - Flap style #1...................................................516
5.18.2 261.02.ARD - Double sidewall/Double endwall/Flap style #2......................................................518
5.18.3 261.03.ARD - Double sidewall/Double endwall/Flap style #3......................................................520
5.18.4 241.01.ARD - Single sidewall/Double endwall/Flap style #1........................................................522
5.18.5 241.02.ARD - Single sidewall/Double endwall/Flap style #2........................................................524
5.18.6 241.03.ARD - Single sidewall/Double endwall/Flap style #3........................................................526
5.18.7 221.01.ARD - Single sidewall/Single endwall/Flap style #1......................................................... 528
5.18.8 221.03.ARD - Single sidewall/Single endwall/Flap style #2......................................................... 530
5.18.9 221.05.ARD - Single sidewall/Single endwall/Flap style #3......................................................... 532
5.19 Trays/Infold-Outfold...................................................................................................................................................534
5.19.1 223.02.ARD - Infold/Outfold..................................................................................................................... 534
5.20 Trays/Kwikset...............................................................................................................................................................536
5.20.1 251.01.ARD - Kwikset tray with reinforcing tabs..............................................................................536
5.20.2 251.04.ARD - Standard Kwikset tray.................................................................................................... 538
5.21 Trays/Walker locks.....................................................................................................................................................540
5.21.1 281.01.ARD - Walker lock......................................................................................................................... 540
5.21.2 281.02.ARD - Walker lock 2/tri-seal lid................................................................................................ 542
5.22 ECMA.............................................................................................................................................................................. 544
5.22.1 100.01................................................................................................................................................................ 544
5.22.2 110.01................................................................................................................................................................ 546
5.22.3 120.01................................................................................................................................................................ 548
5.22.4 130.01................................................................................................................................................................ 550
5.22.5 140.01................................................................................................................................................................ 552
5.22.6 150.01................................................................................................................................................................ 554
5.22.7 160.01................................................................................................................................................................ 556
5.22.8 170.01................................................................................................................................................................ 558
5.22.9 171.01................................................................................................................................................................ 560
5.22.10 180.01..............................................................................................................................................................562
5.22.11 50.01a..............................................................................................................................................................564
5.22.12 60.01................................................................................................................................................................ 566
5.22.13 70.01................................................................................................................................................................ 568
5.22.14 80.01................................................................................................................................................................ 570
5.22.15 90.01................................................................................................................................................................ 572
1ArtiosCAD
12
1. Location and Copyright
Esko
Kortrijksesteenweg 1095
BE-9051 Gent
Belgium
Tel.: (32) (9) 216-92-11
Fax: (32) (9) 216-94-64
Other offices worldwide.
Written and revised by Adam Hartfield, January 2013.
For use with ArtiosCAD 12.0.10 or greater.
© Copyright 2013 Esko Software BVBA, Gent, Belgium.
All rights reserved. This material, information and instructions for use contained herein are theproperty of Esko Software BVBA. The material, information and instructions are provided on an AS ISbasis without warranty of any kind. There are no warranties granted or extended by this document.Furthermore Esko Software BVBA does not warrant, guarantee or make any representationsregarding the use, or the results of the use of the software or the information contained herein. EskoSoftware BVBA shall not be liable for any direct, indirect, consequential or incidental damages arisingout of the use or inability to use the software or the information contained herein.
The information contained herein is subject to change without notice. Revisions may be issued fromtime to time to advise of such changes and/or additions.
No part of this document may be reproduced, stored in a data base or retrieval system, or published,in any form or in any way, electronically, mechanically, by print, photoprint, microfilm or any othermeans without prior written permission from Esko Software BVBA.
This document supersedes all previous dated versions.
This software is based in part on the work of the Independent JPEG Group.
Adobe, Acrobat, Illustrator, and PostScript are either registered trademarks or trademarks of AdobeSystems Incorporated in the United States and/or other countries.
Apple and QuickTime are registered trademarks of Apple, Inc.
Microsoft and the Microsoft logo are registered trademarks of Microsoft Corporation in the UnitedStates and other countries.
The Esko software may contain an implementation of the LZW algorithm licensed under U. S. Patent4,558,302 and foreign counterparts.
The Esko software may contain the “RSA Data Security, Inc. MD5 Message-Digest Algorithm.”
Java and all Java-based trademarks and logos are trademarks or registered trademarks of SunMicrosystems in the U.S. and other countries.
Strip Clip, Strip Fork and Strip Clip® System are products, registered trademarks and patents of
Vossen Profitec® GmbH Germany.
OpenGL is a registered trademark of Silicon Graphics, Inc.
Contains PowerNest library Copyrighted and Licensed by Alma, 2005 – 2007.
1ArtiosCAD
13
The geometry macros contained with this release of Esko ArtiosCAD to facilitate the use of VossenProfitec components are approved by Vossen Profitec GmbH and are used with their permission. TheVossen Prax
® documentation should be consulted and used to ensure correct use and placement
of these geometry macros. The shapes and offsets used are in accordance with Vossen ProfitecGmbH specifications. Usage and placement of these geometry macros to ensure effective strippingperformance however, remains the responsibility of the user. Vossen Profitec GmbH may becontacted for details of worldwide representation at (49) (7771) 920-136 or by e-mail at info@vossen-profitec.de.
This software may use libxml2 - Copyright © 1998-2003 Daniel Veillard - All rights reserved.
All other product names are trademarks or registered trademarks of their respective owners.
Correspondence regarding this publication should be forwarded to:
Esko
Kortrijksesteenweg 1095
BE-9051 Gent
Belgium
info.eur@esko.com
2ArtiosCAD
14
2. Welcome
2.1 Introduction
ArtiosCAD has pre-made design file templates called standards. These standards are grouped instyle catalogs. This book is a reference of each standard contained in the ArtiosCAD Corrugated stylecatalog, the FEFCO style catalog, the Display Standards style catalog, and the ArtiosCAD FoldingCarton style catalog. Style catalogs from other Esko products may be installed on your machine;please refer to the reference manuals for those products for pictures of those standards.
Each design shown in this book was created using its default style choices. For those standardswithout folded documentation plots, single designs were created and then converted to 3D.
You can add your own designs to the Style Catalogs in the Defaults module of ArtiosCAD. For moreinformation, see the Defaults chapter of the ArtiosCAD Administrator Guide.
To learn more about using standards, see the Builder chapter of the ArtiosCAD User Guide.
3ArtiosCAD
15
3. Corrugated Standards
3.1 One piece containers/1 side rollovers
3.1.1 31010W - 1 side rollover - Cover flaps
3.1.2 31015W - 1 side rollover - Cover flaps & lock
3ArtiosCAD
16
3ArtiosCAD
17
3.1.3 31020W - 1 side rollover - Ears
3ArtiosCAD
18
3.1.4 31025W - 1 side rollover - Ears & lock
3ArtiosCAD
19
3.1.5 31026W - 1 side rollover - Ears & lock/dust flaps off cover
3.1.6 31021W - 1 side rollover - Ears / dust flaps off cover
3ArtiosCAD
20
3ArtiosCAD
21
3.2 One piece containers/2 side rollovers
3.2.1 32015W - 2 side rollover - Cover flaps
3ArtiosCAD
22
3.2.2 32025W - 2 side rollover - Cover flaps & ears
3ArtiosCAD
23
3.2.3 32030W - 2 side rollover - Cover panels meet
3ArtiosCAD
24
3ArtiosCAD
25
3.2.4 32035W - 2 side rollover - Cover panels meet/with flaps
3ArtiosCAD
26
3.2.5 32020W - 2 side rollover - Ears
3ArtiosCAD
27
3ArtiosCAD
28
3.2.6 32010W - 2 side rollover - Tuck
3ArtiosCAD
29
3.3 One piece containers/3 side rollovers
3.3.1 71035W - 3 side rollover - Angled side/header slots
3ArtiosCAD
30
3ArtiosCAD
31
3.3.2 33015W - 3 side rollover - Cover flaps
3ArtiosCAD
32
3.3.3 33010W - 3 side rollover - Tuck
3ArtiosCAD
33
3ArtiosCAD
34
3.4 One piece containers/Center joint
3.4.1 36025W - Center joint - With dust & cover flaps
3ArtiosCAD
35
3.4.2 36020W - Center joint - With dust flaps
3ArtiosCAD
36
3ArtiosCAD
37
3.4.3 36010W - Center joint - Without dust flaps
3ArtiosCAD
38
3.5 One piece containers/Swing-in rollover
3.5.1 34011W - Swing-in rollover
3ArtiosCAD
39
3ArtiosCAD
40
3.5.2 34020W - Swing-in rollover
3ArtiosCAD
41
3.5.3 34010W - Swing-in rollover - Tuck
3ArtiosCAD
42
3.6 One piece containers/Wrap around
3.6.1 36030W - Wrap-around - Tuck with optional lock
3ArtiosCAD
43
3.6.2 36035W - Wrap-around - Tuck/cover flaps/optional lock
3ArtiosCAD
44
3.7 Trays
3.7.1 71035W - Trays - Angled side/with header slots
3ArtiosCAD
45
3ArtiosCAD
46
3.7.2 42020W - Trays - Four side rollover
3ArtiosCAD
47
3.7.3 42030W - Trays - Preglued infold
3ArtiosCAD
48
3.7.4 42035W - Trays - Preglued outfold
3ArtiosCAD
49
3.7.5 42010W - Trays - Two side rollover
3ArtiosCAD
50
3.8 FEFCO Standards - 200 Series
FEFCO standards are corrugated standards primarily used in Europe.
Each standard is shown folded and unfolded.
3.8.1 F0200
3ArtiosCAD
51
3ArtiosCAD
52
3.8.2 F0201
3ArtiosCAD
53
3.8.3 F0202
3ArtiosCAD
54
3ArtiosCAD
55
3.8.4 F0203
3ArtiosCAD
56
3.8.5 F0204
3ArtiosCAD
57
3ArtiosCAD
58
3.8.6 F0205
3ArtiosCAD
59
3.8.7 F0206
3ArtiosCAD
60
3ArtiosCAD
61
3.8.8 F0208
F0207 does not exist.
3ArtiosCAD
62
3.8.9 F0209
3ArtiosCAD
63
3ArtiosCAD
64
3.8.10 F0210
3ArtiosCAD
65
3ArtiosCAD
66
3.8.11 F0211
3ArtiosCAD
67
3.8.12 F0212
3ArtiosCAD
68
3ArtiosCAD
69
3.8.13 F0214
There is no F0213.
3ArtiosCAD
70
3ArtiosCAD
71
3.8.14 F0215
3ArtiosCAD
72
3ArtiosCAD
73
3.8.15 F0216
3ArtiosCAD
74
3ArtiosCAD
75
3.8.16 F0217
3ArtiosCAD
76
3.8.17 F0225
3ArtiosCAD
77
3ArtiosCAD
78
3.8.18 F0226
3ArtiosCAD
79
3ArtiosCAD
80
3.8.19 F0227
3ArtiosCAD
81
3.8.20 F0228
3ArtiosCAD
82
3.8.21 F0229
3ArtiosCAD
83
3ArtiosCAD
84
3.8.22 F0230
3ArtiosCAD
85
3.8.23 F0231
3ArtiosCAD
86
3ArtiosCAD
87
3.9 FEFCO Standards - 300 Series
3.9.1 F0300 Base
3ArtiosCAD
88
3.9.2 F0300 Lid
3ArtiosCAD
89
3ArtiosCAD
90
3.9.3 F0301 Base
3ArtiosCAD
91
3.9.4 F0301 Base
3ArtiosCAD
92
3ArtiosCAD
93
3.9.5 F0301 Lid
3ArtiosCAD
94
3ArtiosCAD
95
3.9.6 F0302 Base
3ArtiosCAD
96
3ArtiosCAD
97
3.9.7 F0302 Lid
3ArtiosCAD
98
3ArtiosCAD
99
3.9.8 F0303 Base
3ArtiosCAD
100
3ArtiosCAD
101
3.9.9 F0303 Lid
3ArtiosCAD
102
3ArtiosCAD
103
3.9.10 F0304 Base
3ArtiosCAD
104
3ArtiosCAD
105
3.9.11 F0304 Lid
3ArtiosCAD
106
3ArtiosCAD
107
3.9.12 F0306 Base
3ArtiosCAD
108
3ArtiosCAD
109
3.9.13 F0306 Lid
3ArtiosCAD
110
3ArtiosCAD
111
3.9.14 F0308 Base
3ArtiosCAD
112
3ArtiosCAD
113
3.9.15 F0308 Lid
3ArtiosCAD
114
3ArtiosCAD
115
3.9.16 F0309 Base
3ArtiosCAD
116
3ArtiosCAD
117
3.9.17 F0309 Lid
3ArtiosCAD
118
3ArtiosCAD
119
3.9.18 F0310 Body
3ArtiosCAD
120
3ArtiosCAD
121
3.9.19 F0310 Cover
3ArtiosCAD
122
3ArtiosCAD
123
3.9.20 F0311 Body
3ArtiosCAD
124
3.9.21 F0311 Cover
3ArtiosCAD
125
3ArtiosCAD
126
3.9.22 F0312 Body
3ArtiosCAD
127
3ArtiosCAD
128
3.9.23 F0312 Cover
3ArtiosCAD
129
3.9.24 F0313 Body
3ArtiosCAD
130
3ArtiosCAD
131
3.9.25 F0313 Cover
3ArtiosCAD
132
3.9.26 F0314a
3ArtiosCAD
133
3ArtiosCAD
134
3.9.27 F0320 Body
3ArtiosCAD
135
3.9.28 F0320 Cover
3ArtiosCAD
136
3ArtiosCAD
137
3.9.29 F0321 Body
3ArtiosCAD
138
3.9.30 F0321 Cover
3ArtiosCAD
139
3ArtiosCAD
140
3.9.31 F0325 Body
3ArtiosCAD
141
3.9.32 F0325 Cover
3ArtiosCAD
142
3ArtiosCAD
143
3.9.33 F0330
3ArtiosCAD
144
3.9.34 F0351a
3ArtiosCAD
145
3ArtiosCAD
146
3.9.35 F0351b
3ArtiosCAD
147
3ArtiosCAD
148
3.10 FEFCO Standards - 400 Series
3.10.1 F0401
3ArtiosCAD
149
3ArtiosCAD
150
3.10.2 F0402
3ArtiosCAD
151
3.10.3 F0403
3ArtiosCAD
152
3ArtiosCAD
153
3.10.4 F0404 Body
3ArtiosCAD
154
3ArtiosCAD
155
3.10.5 F0404 Caps
3ArtiosCAD
156
3.10.6 F0405 Body
3ArtiosCAD
157
3ArtiosCAD
158
3.10.7 F0405 Caps
3ArtiosCAD
159
3.10.8 F0406
3ArtiosCAD
160
3ArtiosCAD
161
3.10.9 F0409
3ArtiosCAD
162
3ArtiosCAD
163
3.10.10 F0410
3ArtiosCAD
164
3.10.11 F0411
3ArtiosCAD
165
3.10.12 F0412
3ArtiosCAD
166
3ArtiosCAD
167
3.10.13 F0413
3ArtiosCAD
168
3ArtiosCAD
169
3.10.14 F0415
3ArtiosCAD
170
3ArtiosCAD
171
3.10.15 F0416
3ArtiosCAD
172
3.10.16 F0420
3ArtiosCAD
173
3ArtiosCAD
174
3.10.17 F0421
3ArtiosCAD
175
3.10.18 F0422
3ArtiosCAD
176
3ArtiosCAD
177
3.10.19 F0423
3ArtiosCAD
178
3.10.20 F0424
3ArtiosCAD
179
3.10.21 F0425
3ArtiosCAD
180
3ArtiosCAD
181
3.10.22 F0426
3ArtiosCAD
182
3.10.23 F0427
3ArtiosCAD
183
3ArtiosCAD
184
3.10.24 F0428
3ArtiosCAD
185
3ArtiosCAD
186
3.10.25 F0429
3ArtiosCAD
187
3ArtiosCAD
188
3.10.26 F0430
3ArtiosCAD
189
3.10.27 F0435
3ArtiosCAD
190
3ArtiosCAD
191
3.10.28 F0440
3ArtiosCAD
192
3ArtiosCAD
193
3.10.29 F0441
3ArtiosCAD
194
3.10.30 F0442
3ArtiosCAD
195
3ArtiosCAD
196
3.10.31 F0443
3ArtiosCAD
197
3ArtiosCAD
198
3.10.32 F0444
3ArtiosCAD
199
3.10.33 F0447
3ArtiosCAD
200
3ArtiosCAD
201
3.10.34 F0450
3ArtiosCAD
202
3ArtiosCAD
203
3.10.35 F0451
3ArtiosCAD
204
3ArtiosCAD
205
3.10.36 F0452
3ArtiosCAD
206
3ArtiosCAD
207
3.10.37 F0453
3ArtiosCAD
208
3ArtiosCAD
209
3.10.38 F0454
3ArtiosCAD
210
3ArtiosCAD
211
3.10.39 F0455
3ArtiosCAD
212
3ArtiosCAD
213
3.10.40 F0456
3ArtiosCAD
214
3ArtiosCAD
215
3.10.41 F0458
3ArtiosCAD
216
3ArtiosCAD
217
3.10.42 F0459
3ArtiosCAD
218
3.10.43 F0460
3ArtiosCAD
219
3ArtiosCAD
220
3.10.44 F0470
3ArtiosCAD
221
3ArtiosCAD
222
3.10.45 F0471
3ArtiosCAD
223
3ArtiosCAD
224
3.10.46 F0472
3ArtiosCAD
225
3ArtiosCAD
226
3.10.47 F0473
3ArtiosCAD
227
3ArtiosCAD
228
3.11 FEFCO Standards - 500 Series
3.11.1 F0501
3ArtiosCAD
229
3ArtiosCAD
230
3.11.2 F0502
3.11.3 F0503
3ArtiosCAD
231
3.11.4 F0510 Body
3ArtiosCAD
232
3.11.5 F0510 End Panel
3ArtiosCAD
233
3.11.6 F0511 Body
3ArtiosCAD
234
3ArtiosCAD
235
3.11.7 F0511 End Panel
3ArtiosCAD
236
3.11.8 F0512 Body
3ArtiosCAD
237
3ArtiosCAD
238
3.11.9 F0512 End Panel
3ArtiosCAD
239
3.12 FEFCO Standards - 600 Series
3.12.1 F0601 Body
3ArtiosCAD
240
3.12.2 F0601 End Panel
3ArtiosCAD
241
3ArtiosCAD
242
3.12.3 F0602 Body
3ArtiosCAD
243
3.12.4 F0602 End Panel
3ArtiosCAD
244
3ArtiosCAD
245
3.12.5 F0605 Body
3ArtiosCAD
246
3.12.6 F0605 End Panel
3ArtiosCAD
247
3ArtiosCAD
248
3.12.7 F0606
3ArtiosCAD
249
3.12.8 F0606a
3ArtiosCAD
250
3ArtiosCAD
251
3.12.9 F0606b
3ArtiosCAD
252
3ArtiosCAD
253
3.12.10 F0607 Body
3ArtiosCAD
254
3ArtiosCAD
255
3.12.11 F0607 End Panel
3ArtiosCAD
256
3.12.12 F0608 Body
3ArtiosCAD
257
3ArtiosCAD
258
3.12.13 F0608 End Panel
3ArtiosCAD
259
3.12.14 F0610 Body
3ArtiosCAD
260
3ArtiosCAD
261
3.12.15 F0610 End Panel
3ArtiosCAD
262
3.12.16 F0615
3ArtiosCAD
263
3ArtiosCAD
264
3.12.17 F0615a
3ArtiosCAD
265
3ArtiosCAD
266
3.12.18 F0615b
3ArtiosCAD
267
3ArtiosCAD
268
3.12.19 F0616 Body
3ArtiosCAD
269
3.12.20 F0616 End Panel
3ArtiosCAD
270
3.12.21 F0620 Body
3ArtiosCAD
271
3ArtiosCAD
272
3.12.22 F0620 End Panel
3ArtiosCAD
273
3.12.23 F0621
3ArtiosCAD
274
3ArtiosCAD
275
3.13 FEFCO Standards - 700 Series
3.13.1 F0700
3ArtiosCAD
276
3.13.2 F0711
3ArtiosCAD
277
3ArtiosCAD
278
3.13.3 F0712
3ArtiosCAD
279
3.13.4 F0713
3ArtiosCAD
280
3.13.5 F0718
3ArtiosCAD
281
3ArtiosCAD
282
3.13.6 F0747
3ArtiosCAD
283
3ArtiosCAD
284
3.13.7 F0748
3ArtiosCAD
285
3.13.8 F0752
3ArtiosCAD
286
3ArtiosCAD
287
3.13.9 F0759
3ArtiosCAD
288
3ArtiosCAD
289
3.13.10 F0760
3ArtiosCAD
290
3ArtiosCAD
291
3.13.11 F0761
3ArtiosCAD
292
3ArtiosCAD
293
3.14 FEFCO Standards - 900 Series
3.14.1 F0900
3.14.2 F0901
3ArtiosCAD
294
3.14.3 F0902
3.14.4 F0903
3ArtiosCAD
295
3.14.5 F0904
3ArtiosCAD
296
3.14.6 F0905
3ArtiosCAD
297
3.14.7 F0906
3ArtiosCAD
298
3.14.8 F0907
3.14.9 F0908
3ArtiosCAD
299
3.14.10 F0909
3ArtiosCAD
300
3.14.11 F0910
3ArtiosCAD
301
3.14.12 F0911
3ArtiosCAD
302
3.14.13 F0912
3ArtiosCAD
303
3.14.14 F0913
3ArtiosCAD
304
3ArtiosCAD
305
3.14.15 F0920
3.14.16 F0921
3ArtiosCAD
306
3.14.17 F0929 Length Partition
3ArtiosCAD
307
3ArtiosCAD
308
3.14.18 F0929 Width Partition
3ArtiosCAD
309
3.14.19 F0930 Length Partition
3ArtiosCAD
310
3ArtiosCAD
311
3.14.20 F0930 Width Partition
3ArtiosCAD
312
3.14.21 F0931 Length Partition
3ArtiosCAD
313
3ArtiosCAD
314
3.14.22 F0931 Width Partition
3ArtiosCAD
315
3.14.23 F0932 Length Partition
3ArtiosCAD
316
3.14.24 F0932 Width Partition
3ArtiosCAD
317
3.14.25 F0933 Length Partition
3ArtiosCAD
318
3ArtiosCAD
319
3.14.26 F0933 Width Partition
3ArtiosCAD
320
3.14.27 F0934 Length Partition
3ArtiosCAD
321
3.14.28 F0934 Width Partition
3ArtiosCAD
322
3ArtiosCAD
323
3.14.29 F0935 Divider
3ArtiosCAD
324
3.14.30 F0935 Length Partition
3ArtiosCAD
325
3.14.31 F0935 Width Partition
3ArtiosCAD
326
3ArtiosCAD
327
3.14.32 F0940
3.14.33 F0941
3ArtiosCAD
328
3.14.34 F0942
3ArtiosCAD
329
3ArtiosCAD
330
3.14.35 F0943
3ArtiosCAD
331
3.14.36 F0944
3ArtiosCAD
332
3.14.37 F0945
3ArtiosCAD
333
3.14.38 F0946
3ArtiosCAD
334
3.14.39 F0947
3ArtiosCAD
335
3.14.40 F0948
3ArtiosCAD
336
3ArtiosCAD
337
3.14.41 F0949
3ArtiosCAD
338
3.14.42 F0950
3ArtiosCAD
339
3ArtiosCAD
340
3.14.43 F0951
3ArtiosCAD
341
3.14.44 F0965
[
3ArtiosCAD
342
3.14.45 F0966
3ArtiosCAD
343
3.14.46 F0967
3ArtiosCAD
344
3.14.47 F0970
3ArtiosCAD
345
3.14.48 F0971
3ArtiosCAD
346
3.14.49 F0972
3.14.50 F0973
3ArtiosCAD
347
3ArtiosCAD
348
3.14.51 F0974
3ArtiosCAD
349
3.14.52 F0975
3ArtiosCAD
350
3ArtiosCAD
351
3.14.53 F0976
3ArtiosCAD
352
4ArtiosCAD
353
4. Display Standards
4.1 Bins
4.1.1 Hexagonal Bin
4ArtiosCAD
354
4.1.2 Hexagonal Bin - Dispenser Bottom
4ArtiosCAD
355
4ArtiosCAD
356
4.1.3 Hexagonal Bin - Dispenser Center
4ArtiosCAD
357
4ArtiosCAD
358
4.1.4 Hexagonal Bin - Header
4ArtiosCAD
359
4ArtiosCAD
360
4.1.5 Pallet Base with Cross Lock
4ArtiosCAD
361
4.1.6 Pallet with Lid
4ArtiosCAD
362
4.2 Countertop Displays
4ArtiosCAD
363
4.2.1 Angular Card Dispenser
4ArtiosCAD
364
4.2.2 Angular Card Holder
4ArtiosCAD
365
4.2.3 Angular Dispenser
4ArtiosCAD
366
4.2.4 Auto Bottom Dispenser
4ArtiosCAD
367
4.2.5 Card Dispenser With Header
4ArtiosCAD
368
4.2.6 Countertop Display With Self Lock
4ArtiosCAD
369
4.2.7 Countertop Display With Shelves
4ArtiosCAD
370
4.2.8 One Piece Countertop Display
4ArtiosCAD
371
4.2.9 Straight Card Holder
4ArtiosCAD
372
4.2.10 Tray With Header
4ArtiosCAD
373
4.3 Display bases
4.3.1 All side slope base
4ArtiosCAD
374
4.3.2 Angle Base End Joint
4ArtiosCAD
375
4ArtiosCAD
376
4.3.3 Angle Base Half Base
4ArtiosCAD
377
4ArtiosCAD
378
4.3.4 Display Base2- Center Joint Flg1
4ArtiosCAD
379
4ArtiosCAD
380
4.3.5 Display Base 2-End Joint Flg
4ArtiosCAD
381
4ArtiosCAD
382
4.3.6 Display Base 3-End Joint
4ArtiosCAD
383
4ArtiosCAD
384
4.3.7 Display Base-Center Joint
4ArtiosCAD
385
4ArtiosCAD
386
4.3.8 Display Base-End Joint1
4ArtiosCAD
387
4ArtiosCAD
388
4.3.9 Pallet Base
4ArtiosCAD
389
4ArtiosCAD
390
4.3.10 Step Base-End Joint-Flange
4ArtiosCAD
391
4.4 Display Headers
4.4.1 Counter Tray Header 2
4ArtiosCAD
392
4ArtiosCAD
393
4.4.2 Counter Tray Header 4
4ArtiosCAD
394
4ArtiosCAD
395
4.4.3 Display Tray Header
4ArtiosCAD
396
4ArtiosCAD
397
4.4.4 Display Tray Header 2
4ArtiosCAD
398
4ArtiosCAD
399
4.5 Display Trays
4.5.1 4 Cell Power Wing Tray
4ArtiosCAD
400
4ArtiosCAD
401
4.5.2 Display Tray With Dividers
4ArtiosCAD
402
4.5.3 Self Ship Double Back
4ArtiosCAD
403
4ArtiosCAD
404
4.5.4 Shelf Displayer1
4ArtiosCAD
405
4.5.5 Slope Stack Side
4ArtiosCAD
406
4ArtiosCAD
407
4.5.6 SS DBL BTM
4ArtiosCAD
408
4ArtiosCAD
409
4.5.7 SS Lean Front
4ArtiosCAD
410
4.5.8 SS SNG Back 1VS
4ArtiosCAD
411
4ArtiosCAD
412
4.5.9 SS Tray Double BTM
4ArtiosCAD
413
4ArtiosCAD
414
4.5.10 SS Tray No Back Double BTM
4ArtiosCAD
415
4ArtiosCAD
416
4.5.11 SS Tray Triple BTM
4ArtiosCAD
417
4ArtiosCAD
418
4.5.12 SS Tray W Header
4ArtiosCAD
419
4ArtiosCAD
420
4ArtiosCAD
421
4.5.13 Tray with Divider
4ArtiosCAD
422
4.6 Easels
4.6.1 Double Wing Easel
4ArtiosCAD
423
4.6.2 Double Wing Easel Small
4ArtiosCAD
424
4ArtiosCAD
425
4.6.3 Single Wing Easel
4ArtiosCAD
426
4ArtiosCAD
427
4.7 Fillers
4.7.1 5 Panel Roll
4ArtiosCAD
428
4ArtiosCAD
429
4.7.2 9 Panel Fill
4ArtiosCAD
430
4.7.3 9 Panel Roll
4ArtiosCAD
431
4.7.4 9 Panel unev
4ArtiosCAD
432
4.7.5 Bowtie
4ArtiosCAD
433
4.7.6 Patryfl
4ArtiosCAD
434
4ArtiosCAD
435
4.8 Standalone Displays
4.8.1 Angular Display with Shelves
4ArtiosCAD
436
4ArtiosCAD
437
4.8.2 Display Base
4ArtiosCAD
438
4.8.3 Display Stand
4ArtiosCAD
439
4.8.4 Display Stand with Trays
5ArtiosCAD
440
5. Folding Carton Standards
5.1 Sleeves
5.1.1 111.01.ARD - Standard sleeve
5ArtiosCAD
441
5.2 Friction tuck tops/bottoms
5.2.1 122.05.ARD - Reverse top tuck on 2nd
5ArtiosCAD
442
5.2.2 121.05.ARD - Reverse top tuck on 4th
5ArtiosCAD
443
5ArtiosCAD
444
5.2.3 123.05.ARD - Straight tuck top on 2nd
5ArtiosCAD
445
5.2.4 124.05.ARD - Straight tuck top on 4th
5ArtiosCAD
446
5.3 Friction Tuck Tops/Unituck bottom
5.3.1 122.01.ARD - Reverse top tuck on 2nd
5ArtiosCAD
447
5ArtiosCAD
448
5.3.2 121.01.ARD - Reverse tuck top on 4th
5ArtiosCAD
449
5.3.3 123.01.ARD - Straight tuck top on 2nd
5ArtiosCAD
450
5.3.4 124.01.ARD - Straight tuck top on 4th
5ArtiosCAD
451
5ArtiosCAD
452
5.4 Friction tuck tops/Slit lock bottom
5.4.1 122.03.ARD - Reverse top tuck on 2nd
5ArtiosCAD
453
5.4.2 121.03.ARD - Reverse tuck top on 4th
5ArtiosCAD
454
5ArtiosCAD
455
5.4.3 123.03.ARD - Straight tuck top on 2nd
5ArtiosCAD
456
5.4.4 124.03.ARD - Straight tuck top on 4th
5ArtiosCAD
457
5ArtiosCAD
458
5.5 Friction tuck tops/Houghland bottom
5.5.1 141.10.ARD - Tuck on 2nd - Tab on 2nd
5ArtiosCAD
459
5.5.2 141.04.ARD - Tuck on 2nd - Tab on 4th
5ArtiosCAD
460
5ArtiosCAD
461
5.5.3 141.07.ARD - Tuck on 4th - Tab on 2nd
5ArtiosCAD
462
5.5.4 141.01.ARD - Tuck on 4th - Tab on 4th
5ArtiosCAD
463
5ArtiosCAD
464
5.6 Friction tuck tops/Full flap auto bottom
5.6.1 151.04.ARD - Tuck top on 2nd
5ArtiosCAD
465
5.6.2 151.01.ARD - Tuck top on 4th
5ArtiosCAD
466
5ArtiosCAD
467
5.7 Friction tuck tops/Inturn auto bottom
5.7.1 152.04.ARD - Tuck top on 2nd
5ArtiosCAD
468
5.7.2 152.01.ARD - Tuck top on 4th
5ArtiosCAD
469
5.8 Unituck slit lock top and bottom
5.8.1 122.07.ARD - RT top tuck on 2nd
5ArtiosCAD
470
5ArtiosCAD
471
5.8.2 121.07.ARD - RT top tuck on 4th
5ArtiosCAD
472
5.8.3 123.07.ARD - ST top tuck on 2nd
5ArtiosCAD
473
5ArtiosCAD
474
5.8.4 124.07.ARD - ST top tuck on 4th
5ArtiosCAD
475
5.9 Unituck slit lock top/Houghland bottom
5.9.1 141.11.ARD - Tuck on 2nd - tab on 2nd
5ArtiosCAD
476
5ArtiosCAD
477
5.9.2 141.05.ARD - Tuck on 2nd - tab on 4th
5ArtiosCAD
478
5.9.3 141.08.ARD - Tuck on 4th - tab on 2nd
5ArtiosCAD
479
5ArtiosCAD
480
5.9.4 141.02.ARD - Tuck on 4th - tab on 4th
5ArtiosCAD
481
5.10 Unituck Slit Lock Top/Full flap auto bottom
5.10.1 151.05.ARD - Tuck top on 2nd
5ArtiosCAD
482
5ArtiosCAD
483
5.10.2 151.02.ARD - Tuck top on 4th
5ArtiosCAD
484
5.11 Unituck slit lock top/Inturn auto bottom
5.11.1 152.05.ARD Tuck top on 2nd
5ArtiosCAD
485
5ArtiosCAD
486
5.11.2 152.02.ARD - Tuck top on 4th
5ArtiosCAD
487
5.12 Standard slit lock top/Standard slit lock bottom
5.12.1 122.09.ARD - RT top tuck on 2nd
5ArtiosCAD
488
5ArtiosCAD
489
5.12.2 121.09.ARD - RT top tuck on 4th
5ArtiosCAD
490
5.12.3 123.09.ARD - ST top tuck on 2nd
5ArtiosCAD
491
5ArtiosCAD
492
5.12.4 124.09.ARD - ST top tuck on 4th
5ArtiosCAD
493
5.13 Standard slit lock top/Houghland bottom
5.13.1 141.12.ARD - Tuck on 2nd - tab on 2nd
5ArtiosCAD
494
5ArtiosCAD
495
5.13.2 141.06.ARD - Tuck on 2nd - tab on 4th
5ArtiosCAD
496
5.13.3 141.09.ARD - Tuck on 4th - tab on 2nd
5ArtiosCAD
497
5ArtiosCAD
498
5.13.4 141.03.ARD - Tuck on 4th - tab on 4th
5ArtiosCAD
499
5.14 Standard slit lock top/Full flap auto bottom
5.14.1 151.06.ARD - Tuck on 2nd
5ArtiosCAD
500
5ArtiosCAD
501
5.14.2 151.03.ARD - Tuck on 4th
5ArtiosCAD
502
5.15 Standard slit lock top/Inturn auto bottom
5.15.1 152.06.ARD - Tuck top on 2nd panel
5ArtiosCAD
503
5ArtiosCAD
504
5.15.2 152.03.ARD - Tuck top on 4th panel
5ArtiosCAD
505
5.16 Partial/full overlap seal ends
5.16.1 131.01.ARD - Flap style #1
5ArtiosCAD
506
5ArtiosCAD
507
5.16.2 131.04.ARD - Flap style #2
5ArtiosCAD
508
5.16.3 131.05.ARD - Flap style #3
5ArtiosCAD
509
5ArtiosCAD
510
5.16.4 131.06.ARD - Flap style #4
5ArtiosCAD
511
5.16.5 131.07.ARD - Flap style #5
5ArtiosCAD
512
5ArtiosCAD
513
5.17 Trays/Beers
5.17.1 222.05.ARD - 6 corner
5ArtiosCAD
514
5.17.2 222.02.ARD - Standard/Full drag
5ArtiosCAD
515
5ArtiosCAD
516
5.18 Trays/Brightwoods
5.18.1 261.01.ARD - Double sidewall/Double endwall - Flap style #1
5ArtiosCAD
517
5ArtiosCAD
518
5.18.2 261.02.ARD - Double sidewall/Double endwall/Flap style #2
5ArtiosCAD
519
5ArtiosCAD
520
5.18.3 261.03.ARD - Double sidewall/Double endwall/Flap style #3
5ArtiosCAD
521
5ArtiosCAD
522
5.18.4 241.01.ARD - Single sidewall/Double endwall/Flap style #1
5ArtiosCAD
523
5ArtiosCAD
524
5.18.5 241.02.ARD - Single sidewall/Double endwall/Flap style #2
5ArtiosCAD
525
5ArtiosCAD
526
5.18.6 241.03.ARD - Single sidewall/Double endwall/Flap style #3
5ArtiosCAD
527
5ArtiosCAD
528
5.18.7 221.01.ARD - Single sidewall/Single endwall/Flap style #1
5ArtiosCAD
529
5ArtiosCAD
530
5.18.8 221.03.ARD - Single sidewall/Single endwall/Flap style #2
5ArtiosCAD
531
5ArtiosCAD
532
5.18.9 221.05.ARD - Single sidewall/Single endwall/Flap style #3
5ArtiosCAD
533
5ArtiosCAD
534
5.19 Trays/Infold-Outfold
5.19.1 223.02.ARD - Infold/Outfold
5ArtiosCAD
535
5ArtiosCAD
536
5.20 Trays/Kwikset
5.20.1 251.01.ARD - Kwikset tray with reinforcing tabs
5ArtiosCAD
537
5ArtiosCAD
538
5.20.2 251.04.ARD - Standard Kwikset tray
5ArtiosCAD
539
5ArtiosCAD
540
5.21 Trays/Walker locks
5.21.1 281.01.ARD - Walker lock
5ArtiosCAD
541
5ArtiosCAD
542
5.21.2 281.02.ARD - Walker lock 2/tri-seal lid
5ArtiosCAD
543
5ArtiosCAD
544
5.22 ECMA
5.22.1 100.01
5ArtiosCAD
545
5ArtiosCAD
546
5.22.2 110.01
5ArtiosCAD
547
5ArtiosCAD
548
5.22.3 120.01
5ArtiosCAD
549
5ArtiosCAD
550
5.22.4 130.01
5ArtiosCAD
551
5ArtiosCAD
552
5.22.5 140.01
5ArtiosCAD
553
5ArtiosCAD
554
5.22.6 150.01
5ArtiosCAD
555
5ArtiosCAD
556
5.22.7 160.01
5ArtiosCAD
557
5ArtiosCAD
558
5.22.8 170.01
5ArtiosCAD
559
5ArtiosCAD
560
5.22.9 171.01
5ArtiosCAD
561
5ArtiosCAD
562
5.22.10 180.01
5ArtiosCAD
563
5ArtiosCAD
564
5.22.11 50.01a
5ArtiosCAD
565
5ArtiosCAD
566
5.22.12 60.01
5ArtiosCAD
567
5ArtiosCAD
568
5.22.13 70.01
5ArtiosCAD
569
5ArtiosCAD
570
5.22.14 80.01
5ArtiosCAD
571
5ArtiosCAD
572
5.22.15 90.01
5ArtiosCAD
573
5ArtiosCAD
574