Post on 26-Dec-2015
3D Inspection Automation with SA• Simple Production
Interface MMI • Measurement Plans and
Templates• Scanner Noise Reduction
Filtering • Automatic Feature
Operations– Detection Extraction
Analysis
• Auto-Correspondence of Point Groups
3D Inspection Automation with SA
• Turn-Table Interface and Alignment
• Automated Cloud to CAD Alignment and Analysis
• 100% Inspection Graphical Reports
• Integrated MS-Office Reporting
Production Floor Interface MMI • Simple 1 click “Go/No Go”
Inspection– Red or Green Results
• Integrated Bar-Code Reader
• Archive across the network• Security
– User and Administrator Configurations
– Binary DB files
Templates and Measurement Plans• SA Template Files
– CAD Model and Settings– Instruments Location and Settings
• MP Script of Measurement Process– Load Template– Start Instrument Interface– Data Collection Drive Scanner &
Turn Table– Auto-Alignment to CAD– Feature Detection Extraction– Feature Analysis– Generate Report– Save and Archive Inspection
Noise Reduction Filtering (JWP)
• Systematic Noise– In-Plane with
Laser and Part Edge
• Filter Properties– Plane Angle
Dependent– Grid Size– Conservative and
Aggressive modes
Part being measured(lots of good measurements… looks like a solid model)
Post holding part Bad measurements in space between part and support post
Bad measurements in space between part and calibration balls
Automatic Feature Detection Extraction Analysis
• Real-time 3D Feature Detection from Clouds– Edges– Spheres
• Automatically Extracts– Edges– Spheres– Scribe Lines or b-Splines– Holes
• Automatically Computes Features from Clouds– Planes, Circles, Lines, Spheres
• Analysis Directly to CAD Features
Point Group Auto-Correspondence
• Automatically correlates groups of points regardless of name
• Matches point groups based on unique inter-point distances
• Reduces labeling errors increases reliability
• Improves System Up-Time
Turn-Table Interface & Alignment• Integrated Scanner and Table
Motion• Easy to setup and align• Automatic Turn-Table Scans• Integrated Axis Orientation
Routine• Acceleration and Velocity Control• Programmable Relative and
Absolute – Position– Moves
Automated Cloud to CAD Alignment and Analysis
• Automated Best-Fit Alignment– Extract Points from Clouds– Best-Fit Points to CAD
Features– Transform into CAD
• Point Clouds…Measurements• Instruments • Objects
• No User Interaction• Fast – Repeatable• Set it up once!
100% Inspection Graphical Reports
• Automated Inspection with 3D Scanners
• Easy to Understand• Visualize Trends• Inspect directly to CAD
features!– Surface– Edges– Holes– Planes
• Minimal tooling
Integrated MS-Office Reporting• Reporting:
Graphics, Tables, Results– OfficeXP Word
and Excel docs– Custom
Reports with MP
– HTML