Post on 11-Sep-2015
description
Item Requirement Requested Value/ Quality
Verification
Method
R = Revision
I = Inspection
T = Test
Large Aperture Flat mirror for LBTS
Flat. 1 Material for mirror substrate Material with activation equal or lower than Fused silica R
Flat. 2 Mirror Size * (mm)
H = 650
L = 880
X = 630
Y = 860
T- Supplier
R - Purchaser
Flat. 3 Scratch-Dig Better than 20-10 as per MIL-O-13830AT- Supplier
R - Purchaser
Flat. 4 Reflectivity >98.5% (45 degree angle of incidence and P polarization ) T
Flat. 5 Vacuum Compatibility (mbar) 0.4 J/cm^2 @800nm, for 0.4J/cm2 , 0% damage probability @800nm, for
Red area is the clear aperture of the mirror
L
H