10 PW LBTS input laser beam parameters LBTS input laser beam specifications

Input Pulse Energy (IPE) [J] 150 IPE 250

Input Pulse Duration (IPD) [fs] 15 IPD 25

Input central wavelength (ICWL) [nm] 810 ICWL 820

Input spectral bandwidth (ISB) [nm] 50 ISB 70 (FWHM) [720; 890] (Hard-clip)

Input Spatial Profile (ISP) [mm]

7th order super-Gaussian type with

ISP diameter (FWHM) = 450

ISP diameter (Hard-clip) = 550

Height of the laser beam optical axis from the floor [mm] 1500+ 10

Position of the beam optical axis in the horizontal plane According to the attached drawings

Input spatial intensity modulation (ISIM) ISIM < 25%

Input Strehl Ratio (ISR) 0.75 ISR 0.9

Input Beam Pointing (IBP) rms [rad] 2 IBP 3

Beam polarization state Linearly polarized in the horizontal plane

Direction and position error of the entrance beam

The distance between the center of the entrance beam and the

theoretical center of the entrance pupil is smaller than 15 mm. The

angle between the optical axis of the entrance beam and the theoretical

axis of the entrance pupil is smaller than 1 mrad.

Pulse repetition rate (PRR) Maximum PRR = 1 pulse/min