Post on 14-Jul-2020
1
Education • Ph.D. Student in Faculty of Materials Science and Engineering,
University of Miskolc, Hungary, 2016-2020
• M.Sc. in Materials Engr. University of Babylon , IRAQ, 2003
• B.Sc. in Materials Engr. University of Babylon , IRAQ, 2000
Affiliation • Ph.D. Student in Faculty of Materials Science and Engineering,
University of Miskolc, Hungary
Positions • University of Babylon , May 2004 - January 2006
• Technical Institute of Babylon, January 2006 - April 2014
Contact Information
• Email: aliibrahim76@yahoo.com , alialmosawi76@gmail.com ,
qkoali76@uni-miskolc.hu
• ResearchGate: www.researchgate.net/profile/Ali_Al-Mosawi
• LinkedIn: www.linkedin.com/pub/ali-i-al-mosawi/61/364/654
• Academia.edu: www.independent.academia.edu/AliIAlMosawi
• ORCiD: http://orcid.org/0000-0002-8688-3208
• Publons: https://publons.com/author/551123/ali-i-al-mosawi#profile
• ResearcherID: http://www.researcherid.com/rid/M-2546-2014
• LiveD A: http://livedna.net/?dna=964.11476
• Scopus: https://www.scopus.com/authid/detail.uri?authorId=55427770200
• Facebook: www.facebook.com/ali.ibrahim.12177276
• Twitter: https://twitter.com/aliibrahim2008
• Google+: https://plus.google.com/+AliIAlMosawi/posts
Research Interest
Composite Materials ; Rubber Technology ; Flame Retardants ;
Materials Testing ; Materials Processing
Mobile : 009647809775073
Email : aliibrahim76@yahoo.com
Baghdad, IRAQ
Ali I.Al-Mosawi
CV information until 18 May 2018
2
Journal
Articles
1. Al-Khazraji, K.K. and Al-Mosawi, A.I. (2004) ‘Effect study of
magnesium oxide on thermal conductivity of unsaturated polyester resin’,
Journal of University of Babylon , 9(5), pp. 859–866.
2. Al-Khazraji, K.K. and Al-Mosawi, A.I. (2004) ‘Study of thermal
behavior for composite material consisted from unsaturated polyester
resin reinforced by palms and glass fibers’, Journal of University of
Babylon , 9(5), pp. 867–876.
3. Al-Jeebory, A.A., Al-Mosawi, A.I. and Albdiry, M.T. (2008)
‘Experimental study of the effect of zinc borate on flame retardancy of
carbon- Kevlar hybrid fibers reinforced composite materials’, Al-
Qadisiya journal for engineering sciences, 1(1), pp. 126–132.
4. Al-Mosawi, A.I. and Albdiry, M.T. (2008) ‘Study of some mechanical
properties for composite material consist of phenol formaldehyde resin
reinforced by Kevlar fibers’, Al-Qadisiya journal for engineering
sciences, 1(2), pp. 56–66.
5. Al-Mosawi, A.I. and Albdiry, M.T. (2008) ‘Improvement of Flame
Resistance for Composite Material Consist of Phenol Formaldehyde
Resin Reinforced by Carbon Fibers by Using Flame Retardant Material
Layer’, University of Kerbala journal, 6(1), pp. 226–231.
6. Al-Mosawi, A.I. (2009) ‘Study of some mechanical properties for
polymeric composite material reinforced by fibers’, Al-Qadisiya journal
for engineering sciences, 2(1), pp. 14–24.
7. Al-Jeebory, A.A., Al-Mosawi, A.I. and Jaseem, K.D. (2009) ‘Improving
thermal resistance for composite material reinforced by fibers by using
flame retardant material layer’, Al-Qadisiya journal for engineering
sciences, 2(2), pp. 42–50.
8. Al-Jeebory, A.A., Al-Mosawi, A.I. (2010) ‘Mechanical properties of
araldite matrix composites reinforced with hybrid carbon - Kevlar fibers’,
Al-Qadisiya journal for engineering sciences, 3(1), pp. 44–50.
9. Al-Mosawi, A.I. and Salaman, A.J. (2010) ‘Study the effect of
reinforcing fibers on some mechanical properties of advanced composite
materials’, Al-Qadisiya journal for engineering sciences, 3(4), pp. 163–
169.
10. Al-Mosawi, A.I. (2010) ‘Study the effect of antimony tetroxide addition
on thermal conductivity for araldite resin reinforced by biaxial glass
fibers’, Al-Taqani journal, 23(4), pp. 45–52.
11. Al-Mosawi, A.I., Al-Khazraji, K.K. and Al-Kafaji, J.K. (2010) ‘Study
the effect of antimony trioxide on flame retardancy of polymeric
composite material’, Journal of University of Babylon , 18(5), pp. 2113–
2120.
12. Al-Mosawi, A.I. (2011) ‘Hybrid fire retardants to increasing combusting
resistance for fibers-reinforced composites’, �ational Journal of
Chemistry, 41, pp. 48–54.
13. Al-Mosawi, A.I. (2011) ‘Reducing of Flammability for Polymeric
Composite Material by Using Flame Retardants Coating’, Eng. & Tech.
Journal, 29(11), pp. 2210–2215.
14. Albdiry, M.T. and Almosawi, A.I. (2011) ‘Effect of compacting pressure
on microstructure and mechanical properties of carbide cutting tools’,
Powder Metallurgy, 54(5), pp. 585–592. Doi:
10.1179/1743290110y.0000000001.
3
15. Al-Maamori, M., Al-Mosawi, A. and Hashim, A. (2011) ‘Flame
Retardancy enhancement of hybrid composite material by using inorganic
retardants’, Materials Sciences and Applications, 02(08), pp. 1134–1138.
doi: 10.4236/msa.2011.28153.
16. Al-Mosawi, A.I., Mahmood, A.A., Salaman, A.J. and Alwash, N.A.
(2011) ‘Using of Coating Technique by Inorganic Flame Retardants to
Protect Civil and Industrial Foundations from Fires’, Al-Khwarizmi
Engineering Journal, 7(4), pp. 97–102.
17. Al-Mosawi, A.I. (2011) ‘Reinforcing by hybrid fibers and its effect on
thermal conducting for polymeric composite material’, Al-Qadisiya
journal for engineering sciences, 4(2), pp. 1–8.
18. Al-Mosawi, A.I., Al-Khazraji, K.K. and Al-Kafaji, J.K. (2011) ‘Effect of
zinc borate addition on thermal erosion resistance of antimony trioxide’,
Journal of University of Babylon , 19(3), pp. 1225–1231.
19. Al-Mosawi, A.I. (2011) ‘Effect of reinforcing by MgO particles on
thermal and mechanical characteristics of epoxy resin’, The Iraqi journal
for mechanical and material engineering, 11(3), pp. 560–570.
20. Al-Mosawi, A.I. and Kadhim, F.J. (2011) ‘Effect of reinforcing by
different percentage of fibers on mechanical properties of vinyl ester
resin’, Al-Taqani journal, 24(3), pp. 1–7.
21. Al-Mosawi, A.I., Al-Khazraji, K.K. and Al-Kafaji, J.K. (2011) ‘Study of
thermal properties of antimony trioxide in low temperatures’, Journal of
University of Babylon , 19(4), pp. 1744–1751.
22. Al-Mosawi, A.I. (2011) ‘Geometrically nonlinear analysis of imperfect
laminated composite plates with a variable fiber spacing’, Al-Qadisiya
journal for engineering sciences, 4(4), pp. 439–455.
23. Al-Mosawi, A.I., Salaman, A.J. and Abdulsadah, A.F. (2011) ‘Study the
effect of volume fraction on thermal conductivity values for polyester
particles composites’, Journal of Kufa-physics, 4(1), pp. 29–34.
24. Al-Mosawi, A.I., Abdullah, Z.H. and Al-Qurashi, S.A. (2012) ‘Using of
Conjunction Analysis to study the effect of heat treatments on mechanical
properties of low chromium steel’, Journal of University of Babylon ,
20(1), pp. 381–387.
25. Al-Mosawi, A.I. (2012) ‘Effect of antimony trioxide addition on thermal
properties of advanced composite materials’, Journal of University of
Babylon /Engineering Science, 20(5), pp. 1547–1554.
26. Al-Maamori, M.H., Al-Mosawi, A.I. and Fasal, A. (2012) ‘Effect of
adding shells powder on rheological properties of natural rubber’, Iraqi
Journal of Polymers, 16(1), pp. 71–74.
27. Al-Mosawi, A.I., Ammash, H.K., Al-Maamori, M.H. and Hashim, A.
(2012) ‘Increasing flammability resistance for aircrafts tires by using
magnesium hydroxide’, Academic Research International, 3(2), pp. 11–
14.
28. Al-Mosawi, A.I., Abed, A.A.S., T.AlBdiry, M. and Majeed, T. (2012)
‘Experimental investigation in zinc borate effect on flammability
characteristics of polymeric composite material’, Academic Research
International, 3(2), pp. 70–74.
29. Al-Mosawi, A.I., Ahmed, J.K., Yousif, A.R. and Salaman, A.J. (2012)
‘Flammability of araldite based composite mixed with inorganic
retardants’, International Journal of Engineering Science and Technology
(IJEST), 4(10), pp. 4490–4493.
4
30. Al-Mosawi, A.I., Abbas, S.J. and Flayah, S.H. (2012) ‘Influence of
retardant agent on flame spread through composite surface’, International
Journal of Innovative Research in Engineering & Science, 6(1), pp. 13–
16.
31. Al-Mosawi, A.I. (2012) ‘Formation hybrid flame retardant and its effect
on thermal resistance of araldite resin composite’, Academic Research
International, 3(2), pp. 66–69.
32. Al-Mosawi, A.I. (2012) ‘Mechanical properties of plants-synthetic
hybrid fibers composites’, Research Journal of Engineering Sciences,
1(3), pp. 22–25. 33. Mahdi, S.A., Muhsin, A.H. and Al-Mosawi, A.I. (2012) ‘Using
ultrasonic sensor for blind and deaf persons combines voice alert and vibration properties’, Research Journal of Recent Sciences, 1(11), pp. 50–52.
34. Ali, M.M., Al-Mosawi, A.I., Mohmmed, J.H. and Yousif, A.R. (2012)
‘Study the effect of angle dorsiflexion on bending stress of prosthetic
pylon’, International Journal of Engineering Science and Technology
(IJEST), 4(12), pp. 4818–4835.
35. Rijab, M.A. and Al-Mosawi, A.I. (2012) ‘Stress analysis of conical
shell’, Academic Research International, 3(3), pp. 27–33.
36. Al-Mosawi, A.I., Ammash, H.K., Salaman, A.J., Yousif, A.R. and Ali,
M.M. (2012) ‘Flame retardancy of structural composites’, International
Journal of Innovative Research in Engineering & Science, 6(1), pp. 1–5.
37. Al-Mosawi, A.I., Al-Maamori, M.H. and Wetwet, Z.A. (2012)
‘Mechanical properties of composite material reinforcing by natural-
synthetic fibers’, Academic Research International, 3(3), pp. 108–112.
38. Albdiry, M. T., Al-mosawi, A. I. and Yousif, B. F. (2012) ‘The
synergistic effect of hybrid flame retardants on pyrolysis behaviour of
hybrid composite materials’, Journal of Engineering Science and
Technology, 7 (3), pp. 351-359.
39. Al-Mosawi, A.I., Rijab, M.A., Salaman, A.J. and Alwash, N.A. (2012)
‘Thermal resistance of araldite resin composite mixed with hybrid
retardants’, Iraqi Journal of Polymers, 16(2), pp. 55–59.
40. Al-Mosawi, A.I. and Hatif, A.H. (2012) ‘Reinforcing by Palms - Kevlar
Hybrid Fibers and Effected on Mechanical Properties of Polymeric
Composite Material’, Journal of University of Babylon , 20(1), pp. 188–
193.
41. Al-Mosawi, A.I., Ali, M.M. and Abbas, S.J. (2012) ‘Using of Ansys
program to calculate the mechanical properties of advanced fibers
reinforced composite’, The Iraqi journal for mechanical and material
engineering, 12(4), pp. 376–376.
42. Al-Mosawi, A.I., Ali, M.M. and Mohmmed, J.H. (2012) ‘Experimental
approach to mechanical properties of natural rubber mixing with calcium
carbonate powder’, International Journal of Physical Sciences, 7(49), pp.
6280–6282. doi: 10.5897/IJPS12.683.
43. Al-Mosawi, A.I., Ali, M.M., Yousif, A.R. and Hamza, S.M. (2012)
‘Theoretical estimation to flexural strength of araldite composite used for
manufacturing electrical circuits plates’, Academic Research
International, 3(3), pp. 34–37.
44. Al-Mosawi, A.I. (2012) ‘Effect of reinforcing by natural and synthesis
fibers on thermal conducting for composite material’, Journal of
University of Babylon , 20(3), pp. 937–942.
5
45. Al-Maamori, M.H., Al-Mosawi, A.I. and Othman, N.S. (2013) ‘Effect of
Shells Powder on Scorch and Cure Time of Elastomer Material’,
International Journal of Engineering and Technology (IJET), 3(4), pp.
494–496.
46. Al-Mosawi, A.I. and Ammash, H.K. (2013) ‘Development hybrid
retardant agent and its effect on flammability resistance of composites’,
Research journal of chemical sciences, 3(1), pp. 10–14.
47. Al-Mosawi, A.I., Rijab, M.A., Abdullah, N. and Mahdi, S. (2013)
‘Flexural strength of fiber reinforced composite’, International journal of
enhanced research in science technology & engineering, 2(1), pp. 1–3.
48. Al-Mosawi, A.I., Al-Maamori, M.H. and AL-Mayalee, K.H. (2013)
‘Spectroscopic studies of polyester – carbon black composites’, Research
Journal of Material Sciences, 1(2), pp. 10–14.
49. Al-Maamori, M.H., Al-Mosawi, A.I., Khudhair, S.H. and Muttaleb, M.K.
(2013) ‘Study the Efficiency of adsorption Leshman’s Stain Dye on the
surface of some metal oxides’, Research Journal of Engineering
Sciences, 2(4), pp. 16–21.
50. Al-Mosawi, A.I., Al-Maamori, M.H., Ammash, H.K. and Hashim, A.
(2013) ‘Flammability behavior of tires material after adding flame
retardant agent’, International Journal of Engineering & Technology
IJET-IJE�S, 13(2), pp. 119–121.
51. Al-Maamori, M.H., Al-Mosawi, A.I. and Saadon, L.M. (2013) ‘Effect of
physical additives of shells powder on mechanical properties of natural
rubber’, International Journal of Technical Research and Applications,
1(3), pp. 31–33.
52. Al-Mosawi, A.I., Mohammed, A.R. and Yousif, A.R. (2013) ‘Theoretical
approach to mechanical properties of resinous composite’, Academic
Research International, 4(3), pp. 96–103.
53. Al-Mosawi, A.I. (2013) ‘Flammability of polypropylene based
composite mixed with inorganic retardants’, Academic Research
International, 4(3), pp. 104–107.
54. Rijab, M.A., Al-Mosawi, A.I. and Rigab, M.A. (2013) ‘Using computer
method to study the effect of different type and direction loading on
stress concentrations’, Al-Ma’moon College Journal, 21, pp. 190–202.
55. Al-Bodairy, O.H., Al-Maamori, M.H., Al-Mosawi, A.I. and Saleh, N.A.
(2013) ‘Effect of Tungsten Percent on Transmission Properties for (X-
Ray) of Styrene Butadiene Rubber’, International Journal of Current
Engineering and Technology, 3(3), pp. 804–808.
56. Al-Mosawi, A.I. (2013) ‘Effect of Shells Powder Filler Additives on
Hardness and Tensile Strength Properties of Natural Rubber’, Journal of
Materials Physics and Chemistry, 1(3), pp. 35–36. doi:
DOI:10.12691/jmpc-1-3-2.
57. Al-Maamori, M.H., Abd Alradha, R.M. and Al-Mosawi, A.I. (2013)
‘Mechanical properties for unsaturated polyester reinforcement by glass
fiber using ultrasonic technique’, International Journal of
Multidisciplinary and Current Research (IJMCR), July- August issue, pp.
1–7.
58. Al-Mosawi, A.I. (2013) ‘Learning difficulties in metallurgy lesson: case
study in technical institute of Babylon’, Educational Research
International, 2(1), pp. 116–119.
6
59. Al-Mosawi, A.I., Al-Zubadi, A.A., Al-Maamori, M.H. and Al-Maimuri,
N.M. (2013) ‘Fire Retardants for Civil Structures’, Global journal of
researches in engineering: C ,Chemical Engineering, 13(2), pp. 8–12.
60. Al-Mosawi, A.I., Abed, A.H.A. and Adib, A.M. (2013) ‘Effect of
magnesium oxide additions on electrical conductivity of polyester resin’,
International Journal of Advanced Research, 1(6), pp. 265–268.
61. Al-Mosawi, A.I., Abbas, A. and Abbas, S. (2013) ‘Using of design and
analysis of experiments to estimated properties of polymeric composite’,
International Journal of Advanced Research, 1(6), pp. 336–338.
62. Al-Maamori, M.H., Al-Mosawi, A.I. and Saad, N.A. (2013) ‘Effect of
shells powder on physical properties of natural rubber’, The Iraqi journal
for mechanical and material engineering, 13(2), pp. 384–388.
63. Al-Maamori, M.H., Al-Mosawi, A.I. and Hadi, N.J. (2013) ‘Effect study
of using of oyster shells on rheological properties of rubber’, The Iraqi
journal for mechanical and material engineering, 13(2), pp. 379–383.
64. Al-Mosawi, A.I., Al-Jeebory, A.A., Rijab, M.A. and T.AlBdiry, M.T.
(2013) ‘Improvement of flame retardancy for hybrid composite material
by using zinc borate’, The Iraqi journal for mechanical and material
engineering, 13(3), pp. 565–569.
65. Al-Mosawi, A.I., Al-Zubadi, A.A. and Al-Maamori, M.H. (2014)
‘Increasing inhibition flame resistance for PVC composite by using
2ZnO.3B2O3.3.5H2O-Sb2O3 mixture’, Topclass Journal of Engineering
and Materials Sciences, 1(1), pp. 1–4.
66. Rijab, M.A. and Al-Mosawi, A.I. (2014) ‘Effect of Polyethylene on
Corrosion Protection of Ductile Cast Iron’, International Journal of
Current Engineering and Technology, 4(2), pp. 692–694.
67. Al-Maamori, M.H. and Al-Mosawi, A.I. (2014) ‘Effect of sulfur addition
on vulcanization properties of hybrid rubber batch’, University of
Kerbala journal, 12(2), pp. 258–262.
68. Al-Maamori, M.H., Al-Mosawi, A.I. and Yasser, H.A. (2014)
‘Mechanical behavior of NBR-PVC mixture after immersion in different
media’, International journal of advanced research in engineering and
technology (IJARET), 5(6), pp. 34–39.
69. Rijab, M.A. and Al-Mosawi, A.I. (2014) ‘Improve microstructure of
Aluminum alloys by modification’, International journal of advanced
research in engineering and technology (IJARET), 5(6), pp. 62–67.
70. Rijab, M.A. and Al-Mosawi, A.I. (2014) ‘Effect of Austempering time on
Microstructure and wear resistance of Ductile iron castings’, OALib,
01(08), pp. 1–5. doi: 10.4236/oalib.1101032.
71. Al-Mosawi, A.I. (2014) ‘Theoretical Evaluation to Tensile Strength of
Composite Material by Using Ansys Program’, Journal of University of
Babylon /Engineering Sciences, 22(4), pp. 989–993.
72. Abdulsada, S.A. and Al-Mosawi, A.I. (2015) ‘Tensile Strength of a New
Recyclable and Environment Friendly Composite Material’, Ciência e
Técnica Vitivinícola, 30(1), pp. 32–40.
73. Al-Maamori, M.H., Al-Mosawi, A.I., Abdulsada, S.A. and Yasser, H.A.
(2015) ‘Rheological Properties of NBR-PVC Blend’, EC Chemistry, 1(1),
pp. 25–29.
74. Al-Mosawi, A.I., Abdulsada, S.A. and Hadi, A.A.A. (2015) ‘Effect of
immersion in semi synthetics (30% petroleum oil) on compression
strength of rubber composite’, Wulfenia Journal, 22(3), pp. 395–401.
7
75. Al-Mosawi, A.I. and Abdulsada, S.A. (2015) ‘Deposition of Antimony
Trioxide on the Composite Surface to Increase Its Flame Retardancy’,
Journal of Thin Films, Coating Science Technology and Application,
1(1), pp. 1–3.
76. Rijab, M.A., Al-Mosawi, A.I. and Al-Najar, M.A. (2015) ‘Efficiency of
Butt-Welded Joints of Low-Carbon Steel for Different Types of the
Cooling Rate and Annealing Time’, EC Chemistry, 1(2), pp. 30–34.
77. Al-Mosawi, A.I., Abdulsada, S.A. and Hashim, A. (2015) ‘Mechanical
Properties of Recycled Bamboo Fibers Reinforced Composite’, European
Journal of Advances in Engineering and Technology, 2(4), pp. 20–22.
78. Al-Mosawi, A.I., Al-Maamori, M.H. and Abdulsada, S.A. (2015)
‘Mechanical Properties of Acrylonitrile - Butadiene Rubber Reinforced
by Cement Waste’, Journal of Thin Films, Coating Science Technology
and Application, 2(2), pp. 13–16.
79. Al-Mosawi, A.I., Ali, M.M. and Abdulsada, S.A. (2015) ‘Theoretical
approach to tensile strength of composite material reinforced by recycled
cellulose fibers’, Fire Journal of Engineering and Technology, 1(1), pp.
42–45.
80. Al-Mosawi, A.I., Abdulsada, S.A. and Rijab, M.A. (2015) ‘Mechanical
Properties of Epoxy Nanocomposite’, International Journal of Advanced
Research, 3(6), pp. 1468–1472.
81. Al-Mosawi, A.I. and Abdulsada, S.A. (2015) ‘Using of nanotechnology
to improve the performance of the aircraft tires against flammable’,
International Journal of Advanced Research, 3(6), pp. 1473–1477.
82. Rijab, M.A., Al-Mosawi, A.I., Abdulsada, S.A. and Rijab, M.A. (2015)
‘Recycling of Aluminum Solid Waste in Diyala Company for Electrical
Industries’, International Journal of Innovative Research and Creative
Technology, 1(1), pp. 44–47.
83. Rijab, M.A., Al-Mosawi, A.I., Abdulsada, S.A. and Ajmi, R.K. (2015)
‘Recycling of Aluminum Castings Waste’, EC Chemistry, 1(2), pp. 48–
55.
84. Al-Mosawi, A.I., Abdulsada, S.A., Rijab, M.A. and Hashim, A. (2015)
‘Flame Retardancy of Biopolymer Polyhydroxyalkanoate Composite’,
International Journal of Advanced Research, 3(8), pp. 883–886.
85. Rijab, M.A., Al-Mosawi, A.I. and Abdulsada, S.A. (2015) ‘Evaluate the
Weldability of Stainless Steel Welded in Different Methods’, EC
Chemistry, 1(2), pp. 56–62.
86. Al-Mosawi, A.I., Abdulsada, S.A. and Ali, M.M. (2015) ‘Theoretical
Modeling for Calculation Mechanical Properties of Biopolymer-Plant
Fiber Composite’, International Journal of Fracture and Damage
Mechanics, 1(2), pp. 46–52.
87. Rijab, M.A., Al-Mosawi, A.I., Al-Najar, M.A. and Abdulsada, S.A.
(2016) ‘Effect of Wire Cutting Process on the Variables of Surface
Roughness’, European Journal of Advances in Engineering and
Technology, 3(1), pp. 1–4.
88. Al-Mosawi, A.I., Abdulsada, S.A. and Ali, M.M. (2016) ‘Ansys
modeling for estimation Tensile and flexural strength of green
composite’, Advances in Chemistry and Materials Science, 2(1), pp. 1–7.
89. Al-Mosawi, A.I., Al-Maamori, M.H. and Abdulsada, S.A. (2016) ‘Study
the Effect of Cement Waste on Some Mechanical Properties of
Acrylonitrile-Butadiene Rubber’, Journal of Catalyst and Catalysis, 3(1),
pp. 11–14.
8
90. Abdulsada, S.A. and Al-Mosawi, A.I. (2016) ‘Using of Nucleus Dates
Waste with a Nanoscale Particles as a Green Inhibitor’, International
Journal of Mechanical & Mechatronics Engineering IJMME-IJE�S,
16(6), pp. 27–32.
91. Al-Mosawi, A.I., Abdulsada, S.A. (2016) ‘Fire-Mechanical Properties of
Geopolymer Concrete’, Journal of Catalyst and Catalysis, 3(3), pp. 6–9.
92. Al-Maamori, M.H., Al-Mosawi, A.I., and Abdulsada, S.A. (2017)
‘Mechanical Properties of Hybrid Elastomer Blends’, Journal of Thin
Films, Coating Science Technology and Application, 4(1), pp. 13–17.
93. Al-Mosawi, A.I., Abdulsada, S.A., and Al-Maamori, M.H. (2017)
‘Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice
Husks Silica Blend’, Journal of Polymer & Composites, 5(1), pp. 29-31.
94. Al-Mosawi, A.I., Abdulsada, S.A., Kónya, CS. and Szemere, G. (2017)
‘Orange Peel Waste as a Reinforcing Material for Plasticised PVC’,
GRA�T Journal, 6(2), pp. 88-91.
95. Al-Mosawi, A.I., Marossy, K. (2017) ‘Performance Evaluation of
Mixing Mechanism and its Effects on Thermal Behaviour of Plasticised
PVC’, International Journal of Engineering and Technology, 9(6), pp.
4389- 4396.
96. Al-Mosawi, A.I., Abdulsada, S.A. and Rijab, M.A. (2017) ‘Recycling
Procedure of Plant Waste for Manufacturing Green Composite Material’,
International Journal of Engineering Technology, Management and
Applied Sciences, 5(4), pp. 211-214.
97. Abdulsada, S.A., Al-Mosawi, A.I. and Hadi, A.A.A., (2017) ‘Studying
the Effect of Eco-addition Inhibitors on Corrosion Resistance of
Reinforced Concrete’, Bioprocess Engineering, 1(3), pp.81-86.
98. Al-Mosawi, A.I., Abdulsada, S.A. and Rijab, M.A. (2017) ‘Synthesis
Effect of Natural/Chemical Blend Nanoparticles on Impact Strength of
Sustainable Composite Material’, Journal of Catalyst and Catalysis, 4(1),
pp. 1-5.
99. Al-Maamori, M.H., Al-Mosawi, A.I., (2017) ‘The Impact of Novolac
Wt.% Nanoadditives on Rheological Properties of NBR/CR Blends’,
International Journal of Fracture and Damage Mechanics, 3(1), pp. 19-
23.
100. Al-Maamori, M.H., Al-Mosawi, A.I., and Abdulsada, S.A. (2017) ‘The
Rheological Effect of SiO2 Nanoparticles Additives for NBR/CR
Blends’, Journal of Catalyst and Catalysis, 4(3), pp. 1-4.
101. Abdulsada, S.A., Al-Mosawi, A.I., Hadi, A.A.A., Saad, K. and Samir, H.
(2017) ‘Waste Plants as a Green Inhibitor for Reinforced Concrete’,
Recent Trends in Civil Engineering & Technology, 7(3), pp. 53-58.
102. Al-Mosawi, A.I., Abdulsada, S.A. (2018) ‘Technological Procedure for
Recycling of PET Waste for Sustainable Environment Concept
Achievement’, Open Access Library Journal, 5(e4327), pp. 1-6.
103. Al-Mosawi, A.I., Marossy, K. and Kónya, CS. (2018) ‘Effect of
Plasticizer Percentage on Thermal Properties of Plasticised PVC’, Elixir
International Journal (Materials Science), 117, pp. 50509- 50511.
104. Al-Mosawi, A.I., Abdulsada, S.A. and Hashim, A.A. (2018) ‘Sustainable
Procedure for Using Waste of Date Seeds as a Reinforcement Material
for Polymeric Composites’, Open Access Library Journal, 5(e4384), pp.
1-8.
9
Conference
Papers
1. Effect of percentage of fibers reinforcement on thermal and
mechanical properties for polymeric composite material ,The Iraqi
journal for mechanical and material engineering, Special Issue for 1st
conference of Engineering College/University of Babylon , 17-18 May
2009 .
2. Difference fibers reinforcement percentage and its effect on
mechanical properties of thermosetting resins ,Al-Qadisiya journal for
engineering sciences , Special Issue for 2nd
conference of engineering
College/Al-Qadisiya University,19-20 October 2009.
3. Improvement of mechanical properties of alloy steel type (40x) by
using heat treatments , Al-Qadisiya journal for engineering sciences ,
special issue for 2nd
conference of engineering College /Al-Qadisiya
University , 2009 .
4. Using of hybrid flame retardants to increase thermal erosion
resistance for advanced composite materials, Diyala journal of
engineering sciences,1st Engineering scientific conference, Engineering
College/University of Diyala, 22-23 December ,2010.
5. Comparing study between thermal conducting and environmental
benefit for polymeric composite material reinforcing by hybrid fibers,
The Iraqi journal for mechanical and material engineering, Special Issue
for 1st conference of Materials Engineering College/University of
Babylon , 28-29 December 2010.
6. Theoretical study to effect of reinforcing by fibers on mechanical
behavior of thermosetting resins, The Iraqi journal for mechanical and
material engineering, special Issue for 1st conference of Materials
Engineering College/ University of Babylon , 28-29 December 2010.
7. Using of ceramic fillers to improvement thermal insulation of
thermosetting resins ,Proceedings of F.T.E scientific international
conference, technical College-Najaf, Iraq ,12-14 April 2010.
8. Retarding heat flow in resin materials by using oxide fillers, Journal of
kufa-physics , special issue for Kufa's 1st conference for physics,
University of Kufa, Iraq, 6-7 October 2010.
9. Changing in thermal insulation of epoxy resin after adding different
weight percentages from magnesium oxide particles, The Iraqi journal
for mechanical and material engineering, Special Issue for 1st
conference of Materials Engineering College/ University of Babylon ,
Iraq , 28-29 December 2010.
10. Effect of reinforcing by magnesium oxide particles on thermal
conductivity and mechanical properties of vinyl ester resin ,University
of Kerbala journal , special Issue for 6th scientific conference, Kerbala
univ., Iraq, 1-2 May 2010.
11. Effect of compilation between two types of inorganic flame retardants
on thermal resistance for advanced composite material at elevated
temperatures, Proceedings of 5th
scientific conference, College of
science, University of Babylon , Iraq, 2010.
12. Effect of inorganic flame retardants addition on thermal properties of
advanced composite materials, The Iraqi journal for mechanical and
material engineering, Special Issue for 1st conference of Materials
Engineering College/University of Babylon , 2010.
10
13. Effect of antimony tetroxide on flame retardancy for advanced
polymeric composite material reinforced by hybrid fibers, University
of Kerbala journal, Special Issue for 6th scientific conference, University
of Kerbala, Iraq, 1-2 May 2010.
14. Improvement thermal insulation of araldite resin (AY103) by using
ceramic oxides, The Iraqi journal for mechanical and material
engineering, special Issue for 2nd
scientific conference, engineering
College, University of Babylon , Iraq , 24-25 March 2010.
15. Reducing percentage of scrap and rework production for product of
motor air-cooler in state company of electrical industries with use
tools of statistical control, Proceedings of 1st scientific conference,
materials engineering College, University of Babylon , Iraq , 28-29
December 2010.
16. Designed of an expert system to diagnostic of mechanical properties of
steel, University of Kerbala journal, Special Issue for 6th scientific
conference, University of Kerbala, Iraq, 1-2 May 2010.
17. Performance evaluation of zinc borate to improvement thermal
properties of antimony trioxide at elevated temperatures, The Iraqi
journal for mechanical and material engineering, Special Issue for 2nd
scientific conference, engineering College, University of Babylon ,
Iraq, 24-25 March 2010.
18. Protection of industrial foundations from fires by using flame
retardants coating technique, The Iraqi journal for mechanical and
material engineering, Special Issue for 1st conference of Materials
Engineering College/University of Babylon , 28-29 December 2010.
19. Study of mechanical and thermal behavior of advanced carbon fibers
reinforced composites, The Iraqi journal for mechanical and material
engineering, Special Issue for 2nd
scientific conference, engineering
College, University of Babylon , Iraq, 24-25 March 2010.
20. Using of reinforcing by hybrid fibers to increase efficiency of
unsaturated polyester resin (SIROPOL 8340-Pi) to resisting
mechanical loads ,The Iraqi journal for mechanical and material
engineering, Special Issue for 3rd
conference of Engineering
College/University of Babylon , 23-24 March 2011 .
21. Using of inorganic flame retardants to protect buildings and
industrial foundations from fires ,The Iraqi journal for mechanical and
material engineering, Special Issue for 3rd
conference of Engineering
College/University of Babylon , 23-24 March 2011 .
22. Inhibiting pyrolysis process for fiber-reinforced composites by using
flame retardants additions , Proceedings of 3rd
International
Conference on Software Technology and Engineering (ICSTE 2011),
Kuala Lumpur, Malaysia , ASME Press , 12-13 August 2011 .
23. Study the effects and environmental benefits to establish a project to
treatment fibers garbage's of palms ,Iraqi journal of science , special
Issue for 1st scientific conference for Biological Depart., College of
science ,University of Baghdad, Iraq ,6-7 March 2012 .
24. Effect of Laser Treatment on the Corrosion Resistance ,Journal of
education College ,3(Special issue) , 19th scientific conference, College
of education, University of Mustansiriyah ,Iraq ,25-26 April 2012 .
11
25. Effect of zinc borate - antimony trioxide on flame retardancy of
unsaturated polyester resin composite ,Journal of education College
,3(Special issue) , 19th
scientific conference, College of education,
University of Mustansiriyah ,Iraq ,25-26 April 2012 .
26. Evaluation flame retardancy of epoxy composite by using design of
experiments, 7th International Conference on Optimization of
Mechanical Engineering, Manufacturing Systems, Robotics and
Aerospace (OPTIROB 2012), Mamaia, Romania, 21-23 June, 2012,
Applied Mechanics and Materials , 186 , 2012 .
27. Flammability behavior of composite mixed with retardant agents,
Applied Mechanics and Materials , 7th International Conference on
Optimization of Mechanical Engineering, Manufacturing Systems,
Robotics and Aerospace (OPTIROB 2012), Mamaia, Romania, 21-23
June, 2012, Applied Mechanics and Materials , 186 , 2012 .
28. Effect of variable fiber spacing on post-buckling of boron/epoxy fiber
reinforced laminated composite plate, International Conference on
Biomechanics, Biomechatronics, Neurorehabilitation, Mechanical
Engineering, Manufacturing Systems, Robotics and Aerospace “Smart
Systems in all Fields of the Life” (ICMERA 2012), Bucharest,
Romania, 26-28 October, 2012, Applied Mechanics and Materials, 245,
2013.
29. Effect of carburizing on fatigue strength, 3rd
Scientific International
conference ,Technical College/Najaf , 20-21 February 2013.
30. Flame retardancy of hybrid fibers structural composites, 3rd
Scientific
international conference ,technical College/Najaf, 20-21 February 2013.
31. Effect of calcium carbonate on rheological properties of rubber, 3rd
scientific international conference ,Technical College-Najaf, 20-21
February 2013.
32. Increasing combusting Resistance for Advanced Composites by using
Fire Retardants , 2nd
International Science Congress (ISC-2012), Bon
Maharaj Engineering College, Vrindavan, Mathura, UP, India, 8-9
December 2012, Research Journal of Recent Sciences, 2(ISC-2012),
2013.
33. Environmental impact study for the establishment of an investment
project to process the palms agricultural waste ,Journal of University
of Babylon , Special Issue for 5th
international conference of
environmental science, environmental research center , University of
Babylon , Iraq ,3-5 December 2013 .
34. Fire retardancy characteristics of polymeric composite materials, 1st
National conference for chemistry ,science College of women
,University of Baghdad, Iraq ,19-20 December 2012, J. Baghdad for
Sci,10(3) ,2013.
35. Fire retardancy characteristics of polymeric composite materials, 1st
National conference for chemistry ,science College of women
,University of Baghdad, Iraq ,19-20 December 2012, J. Baghdad for
Sci,10(3) ,2013.
36. Flammability action of tires material after adding flame inhibitor , 1st
National conference for chemistry ,science College of women
,University of Baghdad, Iraq ,19-20 December 2012, J. Baghdad for
Sci,10(3) ,2013.
12
37. Effects of polyvinyl chloride addition on swelling resistance of nitril
rubber, 3rd
International Science Congress (ISC-2013), 8-9 December
2013, Karunya University, Coimbatore, Tamil Nadu, India, Research
Journal of Recent Sciences , 3(ISC-2013) ,2014 .
38. Adding hydrazine to pigments to prevent corrosion of ferrous alloys,
University of Kerbala journal Special Issue for 2nd
scientific conference,
science College, University of Kerbala, Iraq ,26-27 February 2014.
39. Mechanical properties of Acrylonitrile-Butadiene Rubber reinforced
by Polyvinyl chloride particles , Proceedings of 1st national conference
for engineering , engineering College, University of Mustansiriyah, Iraq
,26-27 March 2014. 40. Effect of novolac wt.% on adhesion force of hybrid rubber blends,
MultiScience - Proceedings of XXXI. microCAD International
Multidisciplinary Scientific Conference, University of Miskolc,
Hungary, 20-21 April 2017.
41. Testing the inhibition potential of fenugreek seed powders on steel
rebar samples immersed in aqueous 9aCl solution, Proceedings of
MultiScience - XXXI. microCAD International Multidisciplinary
Scientific Conference, University of Miskolc, Hungary, 20-21 April
2017.
42. Use a Technique Finite Element Software in the Failure Analysis in
the Engineering Sections, Proceedings of 2nd
scientific conference,
Bilad Al- Rafidain University College, Iraq, 18-19 April 2017.
Books
A. Scientific Books
1. Al-Mosawi, A.I., Ammash, H.K. and Salaman, A.J. (2012) Properties
of Composite Materials Databook. 1st edn. Germany: LAP LAMBERT
Academic Publishing. ISBN: 978-3-659-24295-3.
2. Al-Mosawi, A.I. (2012) Flame Retardancy of polymers experimental
papers. 1st edn. Germany: LAP LAMBERT Academic Publishing.
ISBN: 25531 -659 -3-978.
3. Al-Mosawi, A.I. (2012) Composite materials theoretical and
experimental approach. 1st edn. Germany: LAP LAMBERT Academic
Publishing. ISBN: 5-27625-659-3 -978.
4. Al-Mosawi, A.I. (2008) Metals Manufacturing Processes. 1st edn. Iraq:
Al-Taif foundation for printing and publishing. INLA 696.
5. Al-Mosawi, A.I. (2013) Metals Manufacturing Processes. 2nd
edn.
Jordan: Redwan publisher. ISBN: 978-9957-76-113-1.
6. Al-Maamori, M.H. and Al-Mosawi, A.I. (2013) Rubber technology. 1st
edn. Germany: LAP Lambert Academic Publishing. ISBN: 5-39310 -
659-3-978.
7. A. Al-Jeebory, A. and Al-Mosawi, A.I. (2010) Manufacturing
Processes Technology. 1st edn. Iraq: Al-Taif foundation for printing and
publishing. INLA 95.
8. A. Al-Jeebory, A. and Al-Mosawi, A.I. (2014) Manufacturing
Processes Technology. 2nd
edn. Iraq: Redwan publisher. ISBN: 978-
9957-76-178-3.
13
9. A. Al-Jeebory, A. and Al-Mosawi, A.I. (2008) Cutting Tools
Applications. 1st edn. Iraq: Al-Taif foundation for printing and
publishing. INLA 726.
10. A. Al-Jeebory, A. and Al-Mosawi, A.I. (2008) Cutting Tools
Applications. 2nd
edn. Jordan: Redwan publisher. ISBN: 978-9957-76-
161-5.
11. Al-Mosawi, A.I. and Al-Maamori, M.H. (2014) �on Destructive Tests.
1st edn. Germany: LAP Lambert Academic Publishing. ISBN: 978-3-
659-56100-9.
12. Rijab, M.A. and Al-Mosawi, A.I. (2014) Steels technology: Practical
solutions. 1st edn. Germany: LAP Lambert Academic Publishing. ISBN:
978-3-659-58836-5.
13. Al-Maamori, M.H. and Al-Mosawi, A.I. (2014) Polymers and
Composite Materials Technology. 1st edn. Iraq: Al-Sadiq for Publishing
and Distribution. INLA 2213.
14. Al-Mosawi, A.I. and Abdulsada, S.A. (2015) Recycling of waste
materials. 1st edn. Germany: LAP Lambert Academic Publishing. ISBN:
978-3-659-69530-8.
15. Al-Mosawi, A.I. and Abdulsada, S.A. (2015) Antimony and Oxides: A
Review. 1st edn. United States: Createspace Independent Publishing
Platform. ISBN: 978-1511898089. 16. Al-Mosawi, A.I., Abdulsada, S.A. and Rijab, M.A. (2015) Waste processing.
1st edn. Germany: LAP Lambert Academic Publishing. ISBN: 978-3-659-
45126-3.
17. Al-Mosawi, A.I. (2015) Experimental data: Polymers and rubber. 1st
edn. United States: Createspace Independent Publishing Platform. ISBN:
978-1514657461.
18. Al-Mosawi, A.I. (2015) Scientific directory: Free Websites. 1st edn.
United States: Createspace Independent Publishing Platform. ISBN: 978-
1514852583.
19. Liu, X.Q., Al-Mosawi, A.I. and Li, B. (eds.) (2015) Materials science
and advanced technologies in manufacturing II: Selected, peer reviewed
papers from the 4th international conference on materials science and
engineering (ICMSE2014), December 27-28, 2014, Jiujiang, china.
Switzerland: Trans Tech Publications. ISBN: 978-3-03835-371-3.
20. Al-Mosawi, A.I. (2016) ‘Flammability of composites’, Chapter 14 in
Njuguna, J. (ed.) Lightweight composite structures in transport: Design,
manufacturing, analysis and performance. United Kingdom: Woodhead
Publishing, pp. 361–369. ISBN: 978-1-78242-325-6 (print), ISBN: 978-
1-78242-343-0 (online).
21. Al-Mosawi, A.I. and Abdulsada, S.A. (2016) Open Access Scientific
Repositories. 1st edn. United States: Createspace Independent Publishing
Platform. ISBN: 978-1539873617.
22. Al-Mosawi, A.I. (2017) Engineering of Mechanical Machining: Part. I:
Cutting Theory, Turning, and Milling, 1st edn., Noor Publishing,
Germany, December 5, 2017. ISBN: 978-620-2-34680-1.
23. Al-Maamori, M.H. and Al-Mosawi, A.I. (2018) Polymers and
Composite Materials Technology. 2nd
edn. Jordan: Dar Safa for
Publishing and Distributing,. ISBN: 978-9957-687-06-9.
14
B. Literary Books
1. Lover prayers, Al-Sadiq for Publishing and Distribution, Deposit No. in
INLA 122 ,2015.
2. Homeland Tale, Al-Sadiq for Publishing and Distribution, Deposit No.
in INLA 863 ,2015.
3. Thoughts Looking for Marina, Al-Sadiq for Publishing and
Distribution, Deposit No. in INLA 908 ,2015.
Patents
1. Increasing resistance of polymeric composite materials to elevated
temperatures by coating with antimony tetroxide material, Central
Organization for Standardization and Quality Control (COSQC),
No.3743, International Classification (C08C19/30), Iraqi Classification
(4), 2014.
2. Enhancement of thermal resistance of aircraft tires by using
magnesium hydroxide ,Central Organization for Standardization and
Quality Control (COSQC), No.3877, International Classification
(B608C13/00), Iraqi Classification (34), 2014.
3. Manufacturing of composite rubber material for the manufacturing
of rubber rubbles and other reinforced by a brass Bushes used in
mechanical and electrical couplings, Central Organization for
Standardization and Quality Control (COSQC), International
Classification (C08C19/42), No.3913, Iraqi Classification (4), 2014.
4. Design and manufacture of road bumps using waste of Polyethylene
Terephthalate bottles (PET), Central Organization for Standardization
and Quality Control (COSQC), No.4244, International Classification
(C01B31/08) , Iraqi Classification (34) ,2015.
5. Manufacturing of a new composite material reinforced with natural
reed fibers and used in engineering applications and contribute to the
reduction of environmental pollution caused by burning, Central
Organization for Standardization and Quality Control (COSQC),
No.4314, International Classification (E04C2/00) , Iraqi Classification
(5) ,2015.
6. Adding hydrazine to pigments to prevent glaciation, Central
Organization for Standardization and Quality Control (COSQC),
No.4510, International Classification (C09C1/18, C09C1/24) , Iraqi
Classification (4) ,2016.
7. The optimum use of the sunflower husks waste for manufacturing of
environmentally friendly composite material contributes to the
sustainability of natural resources, Central Organization for
Standardization and Quality Control (COSQC), IRAQ, No.4742,
International Classification (Y02P60/148) , Iraqi Classification (3),
2016.
8. Using of date seeds waste for manufacturing of composite material
enter in sustainable engineering applications in order to reduce
environmental pollution and achieve sustainable development, Central
Organization for Standardization and Quality Control (COSQC), IRAQ,
No.4848, International Classification (B27N3/04) , Iraqi Classification
(10), 2017.
15
Participation
in
ational
Conferences
1. 1st Scientific conference of engineering College ,University of Al-
Qadisiyah ,Iraq ,22-23 December 2008.
2. 1st Scientific conference, engineering College, University of Babylon ,
Iraq ,17-18 May 2009 .
3. 2nd
Scientific conference of Engineering College, University of Al-
Qadisiyah, Iraq, 19-20 October 2009.
4. 2nd
Scientific conference, Engineering College, University of Babylon,
Iraq, 24-25 March 2010.
5. F.T.E Scientific international conference, Technical College-Najaf, Iraq
,12-14 April 2010.
6. 2nd
Scientific conference, Science College, Al- Muthanna University,
Iraq, 27-28 April 2010.
7. 6th
Scientific conference, University of Kerbala, Iraq, 1-2 May 2010.
8. 5th
Scientific conference, College of science (CSASC 2010), University
of Babylon, Iraq, 19-20 May 2010.
9. Kufa's 1st conference for physics, University of Kufa, Iraq, 6-7 October
2010.
10. 1st scientific engineering conference (FESC2010), Engineering College,
University of Diyala, Iraq 22-23 October 2010.
11. 1st Scientific conference, technical College of management, Iraq, 28-29
November 2010.
12. 1st Scientific conference, Materials Engineering College, University of
Babylon, Iraq, 28-29 December 2010.
13. 3rd
Scientific conference, Engineering College, University of Babylon,
Iraq, 23-24 March 2011.
14. 3rd
Scientific conference, Al-Khwarizmi College of Engineering,
University of Baghdad, Iraq, 20-21 April 2011.
15. 3rd
scientific international conference, College of administration and
economics, University of Kerbala, Iraq, 10-11 May 2011.
16. 9th
Conference on synthesis and application of polymeric materials and
their qualification of Iraqi industries, Iraqi polymer society, Iraq, 21-22
December 2011.
17. 1st Scientific conference for Biological Depart., College of Science,
University of Baghdad, Iraq ,6-7 March 2012 .
18. 1st Scientific conference, Materials Depart., University of Technology,
Baghdad, Iraq,7-8 March 2012.
19. 13th scientific conference, Al-Mamon University College, Baghdad,
Iraq, 18 April 2012.
20. 19th scientific conference, College of education, University of
Mustansiriyah, Iraq, 25-26 April 2012.
21. 2nd
scientific conference, Madenat Al-elem College, Baghdad, Iraq ,17-
18 September 2012.
22. 2nd
scientific conference, College of science, Tikkret University, Iraq ,
25-26 October 2012 .
23. 6th
scientific conference, College of science, University of Babylon,
Iraq, 6-7 November 2012.
24. 1st International scientific conference of remote sensing and image
processing, College of science, remote sensing unit, University of
Baghdad, Iraq, 11-12 November 2012.
25. 5th
International scientific conference, College of Basic Education,
University of Babylon, Iraq, 13-14 November 2012.
16
26. National conference of physics, University of Babylon, Iraq, 7-8
December 2012.
27. 3rd
scientific conference, engineering College, Tikkret University, Iraq ,
11-12 December 2012 .
28. 1st National conference for chemistry, Science College of women,
University of Baghdad, Iraq, 19-20 December 2012.
29. 14th scientific conference, Al-Mamon University College, Baghdad,Iraq
,24 April 2012.
30. 3rd
Scientific international conference, Technical College-Najaf, Iraq,
20-21 February 2013.
31. 4th
Scientific conference, College of Education, Thi-Qar University,
Iraq, 27-28 March 2013.
32. 9th
Scientific conference of mathematics and computer science ,science
College ,University of Mustansiriyah ,Iraq ,6-7 May 2013.
33. 2nd
International scientific conference, materials engineering College,
University of Babylon, Iraq, 15-16 May 2013.
34. 5th
International conference of environmental science, environmental
research center, University of Babylon, Iraq, 3-5 December 2013.
35. 2nd
Scientific conference, science College, University of Kerbala, Iraq,
26-27 February 2014.
36. 1st National conference for engineering, Engineering College,
University of Mustansiriyah, Iraq, 26-27 March 2014.
37. 1st Basrah International conference for mechanical engineering
(BICME2014), Engineering College, University of Basrah, Iraq, 8-10
April 2014.
38. 1st International conference on laser applications and advanced
materials (ICLAAM), University of Technology,Iraq ,16-18 December,
2014.
39. 3rd
International scientific conference, Materials engineering College,
University of Babylon, Iraq, 20-21 May 2015.
40. International conference of engineering science and technology
(ICEST2015), engineering College, Thi-Qar University, Iraq, 4-6
October 2015.
41. The 2nd
National conference of chemistry, Science College of women,
University of Baghdad, Iraq, 20-21 December 2015.
42. Babylon 1st International engineering conference, Engineering College,
University of Babylon , Iraq , 22-23 December 2015 .
43. 1st International scientific conference, Southern Technical University,
Iraq, 15-17 March 2016.
44. 7th
Scientific conference, College of Basic Education, University of
Diyala, Iraq, 21 March 2016.
45. 1st International conference for scientific and humanitarian studies,
College of Humanities ,Najaf, Iraq , 19-20 April 2016 .
46. 2nd
Scientific conference, Bilad Al- Rafidain University College, Iraq,
18-19 April 2017.
47. 1st International scientific conference, Al-Kitab University College.
Iraq, 18-19 October 2017.
48. 2nd
International Conference for Science &Arts, University of Babylon,
Iraq, 7-8 March, 2018.
17
Participation
in
International
Conferences
1. 3rd
International Conference on Software Technology and Engineering
(ICSTE 2011) , Kuala Lumpur, Malaysia ,2011.
2. International Conference on Optimization of Mechanical Engineering,
Manufacturing Systems, Robotics and Aerospace (OPTIROB 2012)
,Romania ,2012 .
3. International Conference on Civil Engineering and Materials (ICCEM
2012) , Paris, France ,2012.
4. The sixth Jordan international chemical engineering conference ,
Amman , Jordan ,2012 .
5. International Conference on advances in Manufacturing Technology
(ICAMT 2012) ,India ,2012 .
6. 2nd
International Science Congress (ISC 2012) ,India ,2012 .
7. AL-Azhar engineering twelfth international conference
(AEIC2012),Cairo, Egypt ,2012 .
8. 3rd
International Science Congress (ISC 2013) ,India ,2013 .
9. 9th
International Congress of Gis and Geospace Applications (Geo-
Tunis2015), Tunisia, 1-5 April 2015.
10. 8th
International Conference on Materials Science and
Engineering (IMS8) , American University of Sharjah, Sharjah, United
Arab Emirates, February 2-3, 2016.
11. 6th
International Conference on Industrial Engineering and Operations
Management (IEOM2016 KL), Kuala Lumpur, Malaysia, March 8-10,
2016.
12. 2nd
International conference on innovative trends in Engineering,
Science and Management (ICITESM-16),YMCA , Jai Singh Road,
Delhi, India, November 19, 2016.
13. International Conference on Advanced Trends in Engineering
(ICATE2017), Sponsored by The Indian Society for Technical
Education (ISTE) (DMCE) Datta Meghe College of Engineering,
Airoli, Navi Mumbai, Affiliated to Mumbai University, Maharashtra,
India, April 7-8, 2017.
14. 6th
International Conference on Carpathian Euroregion ECOLOGY
(CERECO ’2017), Beregovo, Transcarpathia, Ukraine, March 30-April
1, 2017.
15. XX. Tavaszi Szél Konferencia, Doktoranduszok Országos Szövetsége
with Miskolci Egyetem, Miskolc ,Hungary, March 31-April 2, 2017.
16. MultiScience - XXXI. microCAD International Multidisciplinary
Scientific Conference, University of Miskolc, Miskolc ,Hungary, April
20-21, 2017.
17. International Scientific Conference for Ph.D. students of EU countries
(CER 2017), London, UK, October 30-31, 2017.
18. International Masaryk Conference for Ph.D. Students and Young
Researchers (MMK 2017), The Czech Republic, December 18 - 20,
2017.
18
Journal's
Editorial
Board
1. International Journal of Technical and Research Applications
(http://www.ijtra.com/editor.php) 2. Open Journal of Functional Material Research
(http://www.sciknow.org/journals/editor/id/ojfmr) 3. Research and Application of Material (http://www.sciknow.org/journals/editor/id/ram)
4. Journal of Thin Films, Coating Science Technology and Application (http://stmjournals.com/tech/index.php?journal=JoTCSTA&page=about&op=editorialTeam)
5. International Journal of Research in Mechanical Engineering (http://www.iaster.com/journaldetail.php?Name=IJRME)
6. World Journal of Engineering and Physical Sciences (http://www.wsrjournals.org/journal/wjeps/editorialboard)
7. European Journal of Engineering and Technology (EJET) (http://www.idpublications.org/editorial-board-2/)
8. International Journal of Innovative Technology and Research
(http://ijitr.com/index.php/ojs/about/editorialTeam) 9. Scholars Journal of Engineering and Technology (http://saspublisher.com/sjet-
editorial-board/) 10. Journal of Computing Technologies (http://jctjournals.com/editoriaboard.html)
11. Open Journal of Organic Chemistry (http://www.sciknow.org/journals/editor/id/ojoc)
12. Advanced research in engineering sciences (http://www.aresjournal.net/) 13. Direct research journal of chemistry and material science
(http://directresearchpublisher.org/editors/drjcm/) 14. American Journal of Science and Technology
(http://www.aascit.org/journal/editorial?journalId=902) 15. International Journal of Computer and Advanced Engineering Research
(IJCAER) (http://ijcaer.com/edtboard.htm) 16. Journal of Natural Sciences (JNS) (http://journal-of-natural-sciences.darsgah-e-
ahlebait.com/editorial-board/) 17. Science and Technology journal
(http://www.scienceandtechnologyjournal.org/science/Editorial_Board/index.htm) 18. IOSRD International Journal of Engineering
(http://iosrd.org/journals/index.php/ije/about/editorialTeam) 19. Journal of Materials Sciences and Applications
(http://www.aascit.org/journal/editorial?journalId=891) 20. European Journal of Advances in Engineering & Technology
(http://www.ejaet.com/theme.php?go=about_us) 21. International Journal of Engineering Research and Management
(https://www.ijerm.com/page/editor-board) 22. International Journal of Research in Technology and Management
(IJRTM) (http://ijrtm.com/iotg/?q=node/12) 23. Pubicon International Publications (http://www.pubicon.com/group-editorial-board) 24. Novique New Journal Engineering
(http://novique.in/journals/index.php/ej/pages/view/editorial) 25. International Journal of Mechanical Engineering Research and
Technology (http://meghanapublications.com/IJMERT/editorial-board.php)
26. Asian Journal of Multi-Disciplinary Research (http://www.yadavapublication.com/editorial1.php)
27. Asian Journal of Applied Research (http://www.yadavapublication.com/editorial.php) 28. International Journals of Engineering & Sciences (IJENS)
(http://www.ijens.org/IJENS-Researchers%20Promotion%20Group.html) 29. EC Chemistry Journal (https://www.ecronicon.com/chemistry-editorial-panel.php) 30. International Journal of Mechanical Engineering Research and
Technology (IJMERT) (http://ijmert.net/Editorial-Board.html) 31. Journal of Materials & Metallurgical Engineering
(http://stmjournals.com/index.php?journal=JoMME&page=about&op=editorialTeam) 32. Journal of Computing Technologies (http://www.jctjournals.com/editoriaboard.html)
19
Advisory
Editorial
Board
1. International Journal of Multidisciplinary and Current Research
(IJMCR) (http://ijmcr.com/editorial-board/). 2. Elixir International Journal
( http://www.elixirpublishers.com/index.php?route=common/home)
3. International Journal of Current Engineering and Technology
(http://inpressco.com/editorial-ijcet/)
4. Asian Journal of Current Engineering & Math’s (AJCEM) (http://innovativejournal.in/ajcem/index.php/ajcem/pages/view/editorial_board)
Journal's
and
Conferences
Peer
Reviewer
1. Conference (ICMERA 2012) ,Romania
2. Conference (ICRAMID2014) ,India
3. Conference (CMSE 2014) , China
4. Conference (ICCPEE’14) , Thailand
5. World Congress on Engineering-WCE2015 (International Conference
of Mechanical Engineering (ICME))
6. Conference (ICICAE2015) ,UK
7. Conference (ICEACE’2015) , Thailand
8. Conference (ICFNCE’2015) , UAE
9. Conference (ICAAME’2015) , UAE
10. Conference (ICMAIE’2015) , UK
11. Conference (ICMPP’2015) , Thailand
12. Conference (ICPME’2014) , Thailand
13. International Academy of Chemical, Civil & Environment Engineering
(IACCEE)
14. International Conference on Materials Research and Engineering
(ICMRE 2015)
15. International Conference on Research in Chemical, Biological and
Environmental Engineering (RCBEE'2015)
16. 2nd
International Conference on Innovations in Chemical, Agricultural
and Environmental Engineering (ICICAE'2016)
17. International Conference on Environment, Agricultural And Civil
Engineering (ICEACE’2015)
18. International Institute of Chemical, Biological & Environmental
Engineering (IICBEE) (Scientific Board of Chemical, Civil,
Agricultural and Environmental Engineers)
19. Global Journals Inc. (USA)
20. Materials Sciences and Applications (MSA)
21. International Journal of Engineering and Technology (IJET)
22. Materials Science and Metallurgy Engineering
23. Asian Online Journals
24. Journal of Materials Science Research
25. International Journal of Engineering and Technical Research
26. International Society of Thesis Publication
27. International Journal of Materials Science and Engineering
28. Peak journal of physical and environmental science research
29. International Journal of Scientific and Engineering Research
30. American Journal of Chemical Engineering
31. International Journal of Applied Science
32. Journal of Scientific Research and Reports
33. Journal of Materials Sciences and Applications
20
34. Open Journal of Composite Materials (OJCM)
35. International Journal of Engineering and Applied Sciences
36. International Journal of Engineering and Advanced Research
Technology
37. Athens Journal of Technology & Engineering
38. Materials Research Express
Scientific
Associations
Membership
1. International Association of Computer Science and Information
Technology (IACSIT)
2. Science and Engineering Institute (SCIEI)
3. World Academy of Science, Engineering and Technology (WASET)
4. Association of Research Society in Engineering, USA
5. World Academy of Research in Science and Engineering (WARSE)
6. International Society for Development and Sustainability (ISDS)
7. International Institute of Chemical, Biological & Environmental
Engineering (IICBEE) (Scientific Board of Chemical, Civil,
Agricultural and Environmental Engineers)
8. International Association of Engineers (IAENG).
9. Scientia Research Library.
10. IAENG Society of Chemical Engineering.
11. IAENG Society of Industrial Engineering.
12. IAENG Society of Mechanical Engineering.
13. Industrial Engineering and Operations Management (IEOM) Society.
14. International Association for Intelligent Information and Management
Engineering (IAIIME).
15. International Organization of Scientific Research and Development
(IOSRD).
16. Athens Institute for Education and Research (Chemistry, Industrial
Engineering).
17. International Society of Bionic Engineering (ISBE)
18. International Scientific Academy of Engineering & Technology
(ISAET).
19. Khawarizmi Science Society.
20. Iraqi Writers Union of the Internet.
21. Iraqi Society of Professionals.
22. International parliament of scientists of human development.
23. Asian Council of Science Editors 24. Institute of Electrical and Electronics Engineers (IEEE)
Conferences
Committees
1. International Conference on Materials Science, Metals and
Manufacturing (ICMSMM 2013) , Prague, Czech Republic ,July 7 - 8,
2013
2. International Conference on Biobased Chemicals and Materials
(ICBCM 2013), Amsterdam, Netherlands, August 8 - 9, 2013
3. International Conference on Materials Science, Metals and
Manufacturing (ICMSMM 2013) , Venice, Italy, August 15 - 16, 2013.
4. International Conference on Composite Materials (ICCM 2013) ,Dubai,
UAE, October 22 - 23, 2013
21
5. International Conference on Textile Composites, Materials and
Engineering (ICTCME 2013), Melbourne, Australia ,December 16 - 17,
2013
6. International Conference on Materials Engineering and Technology
(ICMET 2013) , Bangkok, Thailand, December 24 - 25, 2013
7. International Conference on Construction and Civil Engineering
(ICCCE 2013), Bangkok, Thailand ,Dec 24 - 25, 2013
8. International Conference on Polymers and Advanced Materials
(ICPAM 2014), Singapore, SG, January 9 - 10, 2014
9. International Conference on Functional Polymeric Materials (ICFPM
2014), Singapore, SG ,Jan 9 - 10, 2014
10. International Conference on Composite Materials (ICCM 2014), Dubai,
UAE, January 30 - 31, 2014
11. International Conference on Advanced Engineering Materials (ICAEM
2014), Johannesburg, South Africa ,Feb 17 - 18, 2014
12. International Conference on Composite Materials (ICCM 2014),Bruges,
Belgium, April 3 - 4, 2014
13. International Conference on Biobased Chemicals and Materials
(ICBCM 2014) , Paris, France ,April 28 - 29, 2014
14. International Conference on Materials Engineering and Technology
(ICMET2014) ,Las Vegas, USA ,May 12-13, 2014
15. 3rd
International Conference on Machine Design and Manufacturing
Engineering (3rd ICMDME 2014) ,Jeju Island, South Korea. May.24-
25, 2014
16. International Conference on Materials Science, Metals and
Manufacturing (ICMSMM 2014) , Prague, Czech Republic , July 8 - 9,
2014
17. International Conference on Microfluidics and Nanofluidics (ICMN
2014) ,Prague, Czech Republic ,July 10 - 11, 2014
18. 2nd International Conference on Computing, Engineering and
Communication Technologies (ICCECT 2014) , Bangkok, Thailand,
July 14-15, 2014
19. International Conference on Materials Engineering and
Technology(ICMET2014) ,Stockholm, Sweden ,July 15-16, 2014
20. International Conference on Engineering Materials and Applications
(ICEMA 2014),London, United Kingdom ,July 27 - 28, 2014
21. International Conference on Composite Materials (ICCM 2014),
Amsterdam, The Netherlands, August 8 - 9, 2014
22. International Conference on Composite Materials (ICCM 2014), San
Francisco, USA, August 8 - 9, 2014.
23. International Conference on Mining Engineering and Metallurgical
Technology (ICMEMT 2014) ,Venice, Italy , August 14 - 15, 2014
24. International Symposium on Applied Social Science and Development
(ISASSD 2014) ,Dalian, China, August 16-17, 2014
25. International Conference on Engineering Materials and Applications
(ICEMA 2014),Istanbul, Turkey , August 18 - 19, 2014
26. International Conference on High Performance Structures and Materials
(ICHPSM 2014), Kuala Lumpur, Malaysia ,August 26 - 27, 2014
27. International Conference on Engineering, Computing and Technologies
(ICECT 2014), India , September 01, 2014
28. International Conference on Mechanical and Materials Engineering
(ICMME 2014),London, UK, September 4 - 5, 2014
22
29. International Conference on Construction and Civil Engineering
(ICCCE 2014) ,London, UK, September 4 - 5, 2014
30. International Conference on Textile Composites, Materials and
Engineering (ICTCME 2014), Geneva, Switzerland, September 8 - 9,
2014
31. International Conference on Mechanical, Materials and Manufacturing
Engineering (ICMMME 2014) ,Munich, Germany ,October 2 - 3, 2014
32. 3rd International Conference on Computer Applications and Advanced
Communications (ICCAAC 2014), Singapore ,October 3-4, 2014
33. 2nd International Conference on Emerging Trends in Computer Science
and Engineering (ICETCSE 2014) ,Mysore ,India , October 20, 2014
34. International Conference on Interdisciplinary Research &
Technological Developments(IRTD2014), Panjab University,
Chandigarh INDIA , 1st November ,2014
35. International Symposium on Education Reform and Management
Innovation (ISERMI2014), Guangzhou, China, Nov 15 - 16, 2014
36. International Conference on Industrial Engineering and Engineering
Management (IEEM2014), Guangzhou, China, November 15-16, 2014
37. International Conference on Textile Composites, Materials and
Engineering (ICTCME 2014) ,Penang, Malaysia ,Dec 8 - 9, 2014
38. Workshop on Advanced Mechanical Engineering Materials (AMEM
2014) , Jiujiang, China, December 27 - 28, 2014
39. 4th
International conference on materials science and engineering
(ICMSE2014) Jiujiang, China , December 27-28 ,2014.
40. International Conference on Polymers and Advanced Materials
(ICPAM 2015) ,Singapore, SG , January 8 - 9, 2015
41. XII International conference on diamond, carbon materials and
technology (ICDCMT2015) , Zurich, Switzerland ,January 13 - 14,
2015
42. International Conference on Advances In Computer Science,
Electronics & Communication Technologies (ACSECT '15),Bangkok,
Thailand ,17th
January, 2015
43. International conference on engineering materials and applications
(ICEMA 2015), Istanbul, Turkey ,January 26-27, 2015
44. XII International Conference on Materials Engineering and Technology
(ICMET 2015), Jeddah, KSA, January 26 - 27, 2015.
45. International conference on engineering materials and applications
(ICEMA 2015),New Delhi, India , February 15-16 ,2015
46. International conference on engineering materials and applications
(ICEMA 2015), Pattaya, Thailand ,February 15 - 16, 2015
47. International Conference on Construction and Civil Engineering
(ICCCE 2015) ,London, United Kingdom ,February 23 - 24, 2015
48. International Conference on Industrial Engineering and Operations
Management (IEOM2015) ,Dubai, UAE ,March 3-5, 2015.
49. International Conference on Engineering Materials and
Applications(ICEMA 2015),Malaga, Spain ,March 16-17, 2015
50. International Conference on Future Engineering Technology and
Engineering Education(FETEE2015) , Sanya ,China, April 11-12, 2015.
51. International Conference on Future Mechanical, Industrial, and
Electronic Engineering (FMIEE2015), Sanya ,China, April 11-12, 2015.
52. European International Virtual Congress of Researchers (EIVCR2015),
Progressive Academic Publishing, UK ,May 2015.
23
53. Global Conference on Applied Social Science (GCASS 2015) ,
Guangzhou, China, May 9-10, 2015.
54. 4th
International Conference on Machine Design and Manufacturing
Engineering (4th ICMDME2015), Jeju Island, South Korea. May.16-17,
2015.
55. 2nd
International Conference on Advances in Computer Science,
Engineering and Technology (ICACSET 2015),Bangkok, Thailand,
May 18, 2015.
56. International Conference on Intelligent Information and Data Science
(IIDS 2015), Wuhan, China ,June 6-7, 2015.
57. International Conference on Intelligent Information and Management
Engineering (ICIIME 2015) , Wuhan, China, June 6-7, 2015.
58. International Conference on Materials Science, Metals and
Manufacturing (ICMSMM 2015) ,Prague, Czech Republic ,July 8 - 9,
2015
59. International Workshop on Materials Science and Engineering (IWMSE
2015), Guangzhou, Guangdong, China, August 7-9, 2015.
60. International Conference on Biobased Chemicals and Materials
(ICBCM 2015), London, UK ,August 20 - 21, 2015
61. International Conference on Civil and Building Engineering (ICCBE
2015) ,Istanbul, Turkey ,August 30 - 31, 2015
62. International Conference on Construction and Civil Engineering
(ICCCE 2015), London, United Kingdom , September 25 - 26, 2015.
63. International Conference on Advances in Electrical, Electronics,
Computing and Communications Engineering (ICAEECC 2015),
Singapore, October 02-03, 2015.
64. International Conference on Environmental Science and Sustainable
Development (ICESSD2015), Bangkok, Thailand , October 25-26,
2015.
65. International Conference on Advances in Electrical, Electronics,
Computing and Communications Engineering (ICAEECC 2015),
Singapore, November 16-17, 2015.
66. International Conference on Civil and Building Engineering (ICCBE
2015) , Cape Town, South Africa, Nov 17 - 18, 2015.
67. 1st International Conference on Advances in Science, Management and
Engineering (ICASME 2015) , Chennai, India December 18-19, 2015.
68. International Conference on Materials, Structures and Mechanical
Engineering (ICMSME 2015) ,Paris, France ,December 29 - 30, 2015.
69. 3rd
International Conference on Advances in Computer Science,
Electronics and Communication Technologies (ACSECT 2016)
,Bangkok, Thailand, January 22nd
, 2016.
70. 2nd
International Conference on Researches in Science, Management
and Engineering (ICRSME2016), Coimbatore, India, February 18-19
,2016.
71. 6th
International Conference on Industrial Engineering and Operations
Management (IEOM2016 KL), Kuala Lumpur, Malaysia, March 8-10,
2016.
72. International Conference on Sustainable Energy, Environment and
Information Engineering (SEEIE2016), Bangkok, Thailand, March 20-
21, 2016.
24
73. 3rd International Conference On Developments in Science,
Management and Engineering (ICDSME2016) , Tiruchi, India, April
15-16, 2016.
74. International Conference on Electrical, Mechanical and Industrial
Engineering(ICEMIE2016), Phuket, Thailand, April 24-25, 2016.
75. International Conference on Materials Science, Metals and
Manufacturing (ICMSMM 2016) ,Prague, Czech Republic , July 7 - 8,
2016.
76. International Conference on Materials Science, Metals and
Manufacturing(ICMSMM2016),Venice, Italy, August 11-12, 2016.
77. 5th
International Conference on Machine Design and Manufacturing
Engineering (ICMDME2016), Jeju Island, South Korea, August 20-21,
2016.
78. 7th
International Conference on Industrial Engineering and Operations
Management, Rabat, Morocco, April 11-13, 2017.
79. 3rd
North American IEOM Conference, Washington, DC, USA,
September 27-29, 2018.
Honor
and
Awards
1. Holds an honored president of technical education foundation in the
foundation day , 2010
2. Holds a shield of 1st scientific conference, materials engineering
College, University of Babylon , Iraq ,28-29 Dec 2010.
3. Holds an honored president of technical education foundation in the
foundation day , 2011
4. Holds an honored president technical education to complete the
educational bag for material manufacturing processes ,2011
5. Holds the honor Dean Technical Institute of Babylon to win the creators
Competition at the Institute ,27 September 2011
6. Holds an honored president of technical education foundation in the
foundation day , 2012
7. Holds the honor of the Minister of Higher Education and Scientific
Research in Science Day ,15 April 2012
8. Holds an honored president of technical education foundation in the
foundation day , 2013
9. Higher education award for science ,2013
10. Holds an honored president of technical education foundation in the
foundation day , 2014
Courses
1. Programming and operating CNC cutting machines, Technical Institute
of Babylon / Department of Mechanics, 2008
2. The use of nontraditional cutting in metal working, Technical Institute
of Babylon / Department of Mechanics, 2008
3. Statistical quality control, technical institute Babylon / Department of
Mechanics, 2009
4. Ideal methods for activating the role of associate within the University,
Technical Institute of Babylon,2009
5. Initial session in MATLAB, Technical Institute of Babylon /
25
Department of electronics ,2011
6. Educational bags concept, Technical Institute of Babylon / unit of
University performance ,2011
7. Casting techniques, Technical Institute of Babylon / Department of
Mechanics, 2011
8. Welding techniques, Technical Institute of Babylon / Department of
Mechanics, 2012
9. Bodies of cars, Technical Institute of Babylon / department of machines
and equipment ,2012
10. Advanced course in English, Technical Institute of Babylon /
department of machines and equipment ,2012
11. Initial session in the Russian language, Technical Institute of Babylon /
Department of machines and equipment , 2013
12. Maintenance and operation of pumps and determine the causes of repair
systems, Technical Institute of Babylon / department of electronics
,2013
13. Commodity and linear Regulation of spinning machines, Technical
Institute of Babylon / Department of machines and equipment ,2013
14. Course in Materials Engineering, Technical Institute of Babylon /
Department of machines and equipment ,2013
15. Economic Cost-Benefit study and projects evaluation, Technical
Institute of Babylon / Department of machines and equipment ,2013
16. Session in English Conversation, Technical Institute of Babylon /
Department of machines and equipment ,2013
17. Projects management system, Technical Institute of Babylon /
Department of machines and equipment ,2013
18. Scientific methods in textile industry, the Technical Institute of Babylon
/ Department of machines and equipment ,2014
19. Mechanical Machining Operations, Technical Institute of Babylon /
Department of machines and equipment ,2014
20. Preparation of Economic Cost-Benefit studies for development projects,
the Technical Institute of Babylon / department machinery and
equipment ,2014
Contribute
in
Seminars
and
Symposiums
1. Carbide cutting tools - properties, how manufactured, Technical
Institute of Babylon ,2007
2. Possibility of machining of composite materials, Technical Institute - of
Babylon ,2008
3. Study the use of CNC machines in the operation of Engineering
Materials, Technical Institute of Babylon ,2008
4. Study the effect of the mechanical properties of composite materials
and their impact on the use of these materials in the industry, the
Technical Institute of Babylon ,2009
5. Flame Retardants - types ,mechanism of action, Technical Institute of
Babylon ,2009
6. Use of advanced composite materials in space applications, Technical
Institute of Babylon ,2010
7. Possibility of using natural fibers for the manufacture of composite
material panels, Technical Institute of Babylon ,2011.
26
8. Introduction to Cryogenic Materials, Technical Institute of Babylon
,2011
9. 2nd
Symposium for Sustainable Engineering, Engineering College,
University of Babylon ,2013
10. 3rd
Symposium for Sustainable Engineering, Engineering College,
University of Babylon ,2014
Certificates
of
Appreciation
1. President of Qadisiyah University ,2008
2. Dean of Engineering College / University of Babylon ,2009
3. President of Qadisiyah University,2009
4. Dean of Engineering College / University of Babylon ,2010
5. President of Al- Muthana University ,2010
6. President of University of Kerbala ,2010
7. Dean of the College of Sciences / University of Babylon ,2010
8. President of University of Kufa ,2010
9. Dean of technical College of management, 2010
10. President of University of Diyala, 2010
11. President of University of Babylon ,2010
12. Dean of Engineering College / University of Babylon ,2011
13. President of University of Baghdad, 2011
14. Dean of the College of Management and Economics / University of
Kerbala ,2011
15. President of (ICSTE 2011) Conference / Malaysia ,2011
16. Dean of Science College / University of Baghdad, 2012
17. Chairman of the Department of Materials Engineering / University of
Technology, 2012
18. Dean of Al-Mamon University College ,2012
19. Minister of Higher Education and Scientific Research ,2012
20. Dean of Science College / University of Babylon ,2012
21. Dean of Education College / Mustansiriyahh University,2012
22. Dean of Education College for Pure Science / University of Babylon
,2012
23. Dean of Madenat Al-elem College, 2012
24. Dean of College of Basic Education / University of Babylon ,2012
25. The Dean of Science College / University of Baghdad, 2012
26. Dean of science College of women / University of Baghdad, 2012
27. Dean of Engineering College / Tikkret University ,2012
28. President of (ISC 2012) Conference / India, 2012
29. President of University of Babylon ,2013
30. Dean of Al-Mamon University College ,2013
31. Dean of Materials Engineering College / University of Babylon ,2013
32. President of University of Babylon ,2013
33. Dean / President /Chancellor of Global Journals, 2013
34. Dean of Science College / University of Kerbala ,2014
35. Dean of Engineering College / Mustansiriyah University ,2014
36. Dean of Engineering College / Basrah University ,2014
37. Chairman of the Department of Leaser Engineering / University of
Technology, 2014
38. Dean of Materials Engineering College / University of Babylon ,2015.
39. President of Southern Technical University ,2016
27
40. Dean of College of Basic Education / University of Diyala,2016
41. Dean of College of Humanities / Najaf, 2016