Post on 16-May-2020
2018.3.15.Mingxiao Hall
Open Ceremony
L-1 Plenary Lecture
L-2 Plenary Lecture
8:30-9:00
9:00-9:40
9:40-10:20
Break10:20-10:50
C-1 Propulsion & Power componentsSession A-1 Computational Methods B-1 Fundamentals D-1 Propulsion & Power systems
10:50-11:10
11:10-11:30
11:30-11:50
11:50-12:10
AJCPP2018-011Validation of impedance eduction method for acoustic liner panel in grazing flow
Takuya Harada (The University of Tokyo)
Propulsion system of Chinese new generation launch vehicleRuixiang Fan(China Academy of Launch Vehicle Technology)
Opportunities and Challenges in Commercial Aero Engine DevelopmentJinzhang Feng (AECC Commercial Aircraft Engine Co., LTD)
AJCPP2018-013Dynamic Simulation of Hypersonic Pre-cooled Turbojet Engine
Kazuki Kaneoya (Waseda University)
AJCPP2018-001Study for Performance Improvement of Ejector with Mixer Lobes in Annular Duct Subsonic Flow
Kenji Kobayashi (Sojo University)
AJCPP2018-005AIRCRAFT IN A SUSTAINABLE SOCIETY
Masako Shishido(Iwate University)
AJCPP2018-019Comparison of the Linear and Non-linear Unsteady Aerodynamic Forces on the Vibrating Blade Row
Christopher Naval (Kyushu University)
AJCPP2018-029Effects of composition on laminar burning velocity of propane/air/dilution gas mixtures under combustion engine conditions
Masamichi Matsuura (Osaka Prefecture University)
AJCPP2018-003Numerical Study of Inlet Performance with Airframe/Propulsion Interference for High Mach Integrated Control Experiment “HIMICO"
Hidekazu Yoshida (Waseda University)
AJCPP2018-006Optimization Design of the Capacitance Void Fraction Sensor adopting Multi Asymmetric Electrodes for Two Phase flow
Yo Nakajima(Waseda University)
AJCPP2018-020Simple Non-Reflecting Mixing-Plane Method for Multi-Stage Turbomachinery CFD with Improved Conservation
Naoki Tani (IHI)
AJCPP2018-040Combustion Characteristics of the Methane-Oxygen Diffusion Flame According to the Injector-type Variation
Joon Yeol Hong (Pukyong National Universi-ty)
AJCPP2018-004Numerical Estimation for Surface Erosion of Solar Arrays on a Geostationary Satellite by Hall Thruster Plume Spacecraft Interactions
Takanobu Muranaka (Chukyo University)
AAJCPP2018-008The Study on Performance Improvement of a Tip-Driven Electromagnetic Fan for Aircraft Propulsion using a Lab-Scale Model
Shoichi Abe (Nihon University)
AJCPP2018-021Numerical Investigation of Novel Tesla Turbine Concept Combined with a Cascade
Shogo Nishimura (The University of Tokyo)
AJCPP2018-049The characteristics of weak shock waves propagating through a convergent channel
Guang Zhang (Andong National University)
AJCPP2018-031Modal Analysis of Combustion Oscillation Based on High-speed Measurements of CH* chemiluminescence for a Liquid Rocket Engine Model Combustor with a Pintle Injector
Kyo Sugihara (The University of Tokyo)
AJCPP2018-017Proposals for small Propulsion & Power systems using tetra-ol GAP
Ayana Banno (Chiba Institute of Technology)
-1-
Mingxiao Hall QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
-2-
GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
13:30-13:50
13:50-14:10
Lunch Time12:10-13:30
AJCPP2018-025Sound Absorption Characteristic of Stainless Steel Foam with Porosity Variation
Jannati A. Tuasikal (The University of Tokyo)
AJCPP2018-054Drag Reduction of Hypersonic Blunt Body by Reacting/Non-reacting Gas Injection
Yong-Chan Kim(Inha University)
AJCPP2018-033Effect of Inlet Distortion on Aerodynamic Characteristics of Axial Fan
Ryuichi Okamoto(The University of Tokyo)
AJCPP2018-022Conceptual Study on PEFC-LiB Hybrid Propulsion System
Takayuki Kojima(JAXA)
AJCPP2018-027Numerical Analysis of the Effect of Cathode Configuration on Hydrogen MPD Thruster Performance
Shitan Tauchi(The Graduate University for Advanced Studies)
AJCPP2018-056Analysis of Injection Conditions of Counter-flow Jets for Drag Reduction of a High Speed Vehicle
Jaecheong Lee(Chungnam National Universi-ty)
AJCPP2018-037System Parameter Influences on Explosive Detonation in Microscale Exploding Foil Initiator
Kyoungjin Kim(Kumoh National Institute of Technology)
AJCPP2018-023Development of Electrothermal Pulsed Plasma Thruster Systems for Powered Flight onboard the Osaka Institute of Technology 2nd PROITERES Nano-Satellite
Ryota Fujita(Osaka Institute of Technology)
14:10-14:30
14:30-14:50
AJCPP2018-028Numerical Flow Simulation of Multiple Resonators under 2D Grazing Flow
Tsubasa Iwafune(Kanazawa Institute of Technology)
AJCPP2018-057Dependency of Supersonic Combustion Regimes on Fuel Temperature
Jeong-Yeol CHOI(Pusan National University)
AJCPP2018-038Ultrasonic Atomization Effect on Partial-ly-premixed Combustion of Kerosene-Air Mixture Sprayed through a Slit-jet Nozzle
Min Cheol Kim(Pukyong National Universi-ty)
AJCPP2018-024Development of the Osaka Institute of Technology 2nd PROITERES Nano-Satellite with High-Power Electrothermal Pulsed Plasma Thrusters for Powered Flight
Ryota Fujita(Osaka Institute of Technology)
14:50-15:10
AJCPP2018-032Large Eddy Simulation of turbulent combus-tion in Precooled Turbojet Model Afterburner using Eddy Dissipation Concept
Hiromu Ishikawa(The University of Tokyo)
AJCPP2018-068Effect of Particle Damping for Solid Rocket Motors Considering Tri-modal Particle Size Distribution
Donghee Lee(Korea Aerospace University)
AJCPP2018-046Study on Performance Analysis of Solid Rocket Motors using Multi-Dimensional Modules
Seok-Hwan Oh(Inha University)
AJCPP2018-058Preliminary Performance Estimation of 50 W-class RF Ion Engine
Pham Tran Dang Quang(University of Ulsan)
15:10-15:30
AJCPP2018-035LES investigation of supersonic mixing layer using different type of gas
Tatsuya Kishi(Okayama University)
AJCPP2018-070Viscosity and Viscoelastic properties of Mono-propellant Gel with Nano/Micro Sized SiO2 Gellant
Jinwu Jang(Korea Aerospace University)
AJCPP2018-047Flame Characteristics of Gaseous Fuel / LOx Combustor at Supercritical Pressure
Tae Seon Park(Kyungpook National University)
AJCPP2018-016Engine-Cycle Analysis on Boundary Layer Ingesting Engine Reflecting Experimental Data with Distortion Plate
Yoshihiro MITANI(Waseda University)
AJCPP2018-030Swirling Combustion Flow Field Evaluation of Tangential-Axial Injection Hybrid Rocket by Large Eddy Simulation
Tomoki Matsuno(The University of Tokyo)
AJCPP2018-063Prediction of Pseudo Shock Waves in a Constant Area Duct
Vignesh Ram Petha Sethuraman(Andong National University)
AJCPP2018-039Performance Characteristics of the Bipropel-lant Methane Thruster Using Swirl-coaxial Injector
Seong Hun Bae(Pukyong National Universi-ty)
AJCPP2018-034Key Technologies for Microwave Rocket
Kuniyoshi Tabata(The University of Tokyo)
C-2 Propulsion & Power componentsSession A-2 Computational Methods B-2 Fundamentals D-2 Propulsion & Power systems
Break15:30-15:50
-3-
GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
15:50-16:10
16:10-16:30
AJCPP2018-078Turbulence Model Selection and Parameter Optimization for Micro-scale Compressor Performance Simulation
Zhiping LI(Beihang University)
AJCPP2018-073Development of Hypersonic Ludwieg Tube of Konkuk University(KULT)
Sungmo Yang(Konkuk University)
AJCPP2018-048Flow Separation Characteristics of An Asymmetric Nozzle
Kang-min Lee(Korea Aerospace University)
AJCPP2018-081Analysis of Thermal Throat Characteristics of a Wide-Range RBCC Combustor at Ramjet ModeLUO Feiteng(Science and Technology on Scramjet Laboratory Beijing Power Machin-ery Research Institute)
AJCPP2018-083New realization of CFD turbulence simulation
Mikhail Ja. Ivanov(Central Institute of Aviation Motors)
AJCPP2018-084Stall Warning Approach with Complicated Inlet Flow
Ruize Xu(Beihang University)
AJCPP2018-053Swirl Injection and Combustion Instability in Hybrid Rocket
Jungeun Kim(Konkuk University)
AJCPP2018-098Effects of Flow Condition and Injector Geometry on Flame Structure from Bi-swirl Coaxial Injectors
Donghyun Hwang(Chungbuk National University)
16:30-16:50
16:50-17:10
AJCPP2018-085A Hybrid Method for Lean Blow-off Predictions of Swirling Stabilized Flames
Zhonghao Wang(Chinese Academy of Sciences)
AJCPP2018-104POD Analysis of Surface Wave Characteris-tics on Conical Liquid Film
Zhongtao Kang(CARDC)
AJCPP2018-059Study on Multiple Shock Waves in a Supersonic Nozzle
Jintu K. James(Andong National University)
AJCPP2018-103Design of a tri-ducts inward turning inlet for a wide-range operation with a single rotational flap
Chengxiang Zhu(Xiamen University)
17:10-17:30
AJCPP2018-089Large Eddy Simulation of Supersonic Turbulent Boundary Layer over a Shock-elim-inating Wavelike Wall
Xu Wang(National University of Defense Technology)
AJCPP2018-125Investigation on flow characteristic and parameters optimization of a new conception of hybrid TC nozzle
Fu Song(Northwestern Polytechnical University)
AJCPP2018-072Analysis of Turbulent Combustion Character-istic of Single Rocket Combustor with Shear-coaxial GH2/GO2 Injector
Seung-Min Jeong(Pusan National University)
AJCPP2018-165Air Turbo Ramjet Expander Performance AnalysisBased on Gases Dissociation Effect
Chen Huan(CAS)
17:30-17:50
AJCPP2018-091Large Eddy Simulation of the Flow Structures and Mixing Fields in a Rear-wall-expansion Cavity
Zun Cai (Science and Technology on Scramjet Laboratory)
AJCPP2018-128Numerical Simulations of Shock-Induced Combustion for Hypersonic Air-Breathing Propulsion
Sheng Zhang (Tsinghua University)
AJCPP2018-090Study on Boundary Layer Flow Regime of Diffusion Cascade
LM Gao (Northwestern Polytechnical University)
AJCPP2018-012Combustion Test of Hydrocarbon Fueled Ramjet Combustor
Hideyuki Taguchi (JAXA)
17:50-18:10
AJCPP2018-101Development of a 1D Method for Hall Thruster Performance Analysis
Mingyoung Cho (Korea Aerospace Universi-ty)
AJCPP2018-129Study about the Influence of Exit Shape on the REST Inlet during Cross Section Fusion Process
Shuai Zhou (Aero Engine Academy of China)
AJCPP2018-092Shape Control and Surface Hydrophilic Modification of Emitter Arrays for Ionic Liquid Ion Source Electrospray Micro Thruster
YU M. Xing (Beihang University)
AJCPP2018-014Experimental and Analytical Study on Suppression of Blade Vibration using Tip-Located Electromagnetic Device
Keiichi OKAI (JAXA)
AJCPP2018-088Investigation on The Vibration Energy Transmission Mechanism of Casing with Different Load and Boundary Conditions Based on Structural Intensity Method
Yingqun Ma(Chinese Academy of Sciences)
AJCPP2018-116Study on the influence of the fluid-ther-mal-structural coupling on the inlet parame-ters of the hypersonic intake
Guangyue Dai(China Aerodynamics Research and Development Center)
AJCPP2018-061Analysis of Single Radial Swirler Combustor by Using DMD(Dynamic Mode Decomposi-tion)
Kyobin Lee(Korea Aerospace University)
AJCPP2018-149Technique of Investigation of Thermal Conductivity of Materials In a Field of Centrifugal Accelerations
Alexander Lepeshkin(Central Institute of Aviation Motors)
C-3 Propulsion & Power componentsSession A-3 Computational Methods B-3 Fundamentals D-3 Propulsion & Power systems
-4-
GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
2018.3.16.Mingxiao Hall
L-3 Plenary Lecture
L-4 Plenary Lecture
8:30-9:10
9:10-9:50
Break9:50-10:20
C-4 Propulsion & Power componentsSession A-4 Computational Methods B-4 Fundamentals D-4 Test and Evalution
13:30-13:50
13:50-14:10
14:10-14:30
AJCPP2018-105Numerical Investigation of Diffuser Rotating Stall in a Centrifugal Compressor with Vaned Diffuser
Yang Zhao (Xi’an Jiaotong University)
R&D Activities on Aero-propulsion and Power in JapanToshinori WATANABE(The University of Tokyo)
Overview of a Pintle Injector for Liquid Rocket EnginesJaye Koo (Korea Aerospace University)
L-5 Plenary Lecture
L-6 Plenary Lecture
10:20-11:00
11:00-11:40
Lunch11:40-13:30
Progress in Hypersonic Airbrething PropulsionRiheng Zheng(Science and Technology Laboratory on Scramjet)
Volcanic Ash: a fundamental propulsion hazard?Donald Dingwell(Ludwig-Maximilians-University Munich)
AJCPP2018-133Research on impact force measurement based on stress wave
Zongjin Ren (Dalian University of Technolo-gy)
AJCPP2018-093Numerical Investigation on Rotating Instability in a Transonic Fan Rotor
Ming Zhang (Beihang University)
AJCPP2018-036A ground combustion test facility for high altitude simulation
Isang Yu (Chungnam National University)
AJCPP2018-110Numerical Simulations Aided Diagnostic of the Flow in JF-16 Expansion Tube
Kai Zhou (China Academy of Aerospace Aerodynamics)
AJCPP2018-136Study of the Influence of the Injection and Suction Flow Control Method on the Aerodynamic Performance of Supersonic Aircraft
Linjing Ma (Beijing Electro-Mechanical Engineering Institute)
AJCPP2018-094Numerical Analysis of Flow Characteristics of Blade Trailing Edge
Zheng Guanghua (Northwestern Polytechnical University)
AJCPP2018-041Performance Test of Korean Staged Combus-tion Cycle Engine
Chae-hyoung Kim (Korea Aerospace Research Institute)
AJCPP2018-112Analytic model and the influence of actuator number on the performance of Plasma Synthetic Jet Actuator Array
Zhibo ZHANG (Air Force Engineering University)
AJCPP2018-009A Plume Cross-Sectional Shape of Transverse Helium Injection Having Weakly Penetration into a Supersonic Boundary Layer by a Porous Injector
Yuya Nakatsuru (National Defense Academy of Japan)
AJCPP2018-096Application of Entropy Generation Theory to Flow Loss Analysis in Transonic Axial Compressors
WANG Wei (Huazhong University of Science and Technology)
AJCPP2018-050Experimental Investigation on the Liquid Film Generated by Slit Injector
Hyeongwon Lee (Seoul National University)
14:30-14:50
14:50-15:10
15:10-15:30
AJCPP2018-166Hybrid RANS/LES Simulation of Turbulent Combustion in a SCRAMJET Combustor using Level-Set Based Flamelet Model
Juyong Lee (Korea Aerospace University)
AJCPP2018-119Fluid-structure Interaction Simulation Study of Vibration Suppressing Effects of Axial Skewed Slots on Transonic Compressor Rotor
Ruoyang LIU (Aero Engine Academy of China)
AJCPP2018-099Design and Cold-flow Test of Bi-propellant Injectors for a Moon Exploration Thruster
Wongu Lee (Chungbuk National University)
AJCPP2018-062Enthalpy Estimation in a 0.4 MW Class Arc-Jet Plasma Wind tunnel
Rajesh Kumar Chinnaraj (Chonbuk National University)
AJCPP2018-164Improvement of compressible flamelet model using artificial neural network
Himeko Yamamoto (JAXA)
AJCPP2018-124Investigation of plasma synthetic jet actuators in quiescent flow
Mengxiao Tang (Air Force Engineering University)
AJCPP2018-106Effect of static deflection on a centrifugal compressor with backside cavity
Yurun Li (Xi’an Jiaotong University)
AJCPP2018-066Experimental Study of Plume Gas Tempera-ture Distribution and Infrared Signal in Micro Turbojet Engine
Sunmi Kim (Chonbuk National University)
AJCPP2018-126Investigation on the Large-scale simulation of multi-stage compressor
WangZiwei (China Aerodynamics Research and Development Center)
AJCPP2018-082Numerical Study of the Flow and Heat Transfer Characteristics of SupercriticalNitrogen in Roughened Straight Cooling Passage of Hypersonic Engines
Jiangnan Zhu (Aero Engine Academy of China)
AJCPP2018-115Control of the compressor tip leakage flow with plasma actuation
Zhang Haideng (Air force Engineering University)
AJCPP2018-069Combustion Tests of Clustered Hybrid Rocket Motors for Vertical Landing Application
Suhan Ko (Korea Aerospace University)
15:50-16:10
AJCPP2018-132Research of modeling and simulation on scramjet fuel supply system based on controllable cavitating Venturi
Siyu Wen (National University of Defense Technology)
AJCPP2018-071On the Development of Designing Method of Liquid-Propellant Rocket Propulsion System using Big Data
Hyoungkyung Mun (Korea Aerospace Research Institude)
AJCPP2018-118Flame Instability of Transverse Ethylene Injection in a Rectangular Supersonic Combustor with Symmetric Expansion
Guiyun Gao (National University of Defense Technology)
AJCPP2018-102Experimental Investigation of the Response of Methane Flames to the Acoustic Excitation
Yongchao Sun (National University of Defense Technology)
16:10-16:30
AJCPP2018-143Tomography for two-dimensional gas temperature distribution based on TDLAS
Can Luo (Xiamen University)
AJCPP2018-167Ignition Assist of Unheated Liquid Hydrocar-bon in a Supersonic Flowwith Atomization and Pilot Hydrogen
Inyoung Yang (Korea Aerospace Research Institute)
AJCPP2018-123Investigation of Infrared Signature of Serpentine Nozzle for Turbofan
Wen Cheng (Northwestern Polytechnical University)
AJCPP2018-154Schlieren Imaging of Underexpanded Jet Flow under Thermoacoustic Resonance
Seonghyeon Seo (Hanbat National University)
16:30-16:50
AJCPP2018-148Numerical Study on Effects of Injection Position on Supersonic Combustion of kerosene
Xiaojun Zhu (China Academy of Aerospace Aerodynamics)
AJCPP2018-010Study on Ignition Delay Time of Methane/Ethylene/Heptane Mixture Gas Using Chemical Reaction Analysis
Shinichiro Ogawa1 (Tohoku University)
AJCPP2018-127Loss Mechanism of the Tip Leakage Flow in a Low Speed Axial Compressor
Zhiyuan Li (Chinese Academy of Sciences)
AJCPP2018-156Experimental Study of Broadband Noise Generated from Linear Cascade
Yuji Koike (The University of Tokyo)
-5-
GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
Break15:30-15:50GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall
C-5 Propulsion & Power componentsSession A-5 Computational Methods B-5 Fundamentals D-5 Test and Evalution
16:50-17:10
17:10-17:30
17:10-17:30
AJCPP2018-155Unsteady Flow Characteristics in The Entrance Section of a 2-D Mixed-compression Supersonic Inlet
Bing Wan (Hypervelocity Aerodynamics Institute of CARDC)
AJCPP2018-002Study of Axial Flow Turbine 1D Optimum Design
Jiang Zhuyu (China Aerodynamics Research and Development Center)
AJCPP2018-140The Design and Analysis of a New Type of Cooling Cycle for Scramjet
Bang-Yun Wang (National University of Defense Technology)
AJCPP2018-158Laser Optical Measurement of Acoustic Phenomena of a Supersonic Jet Using 2-D Position Sensitive Detector
Kazuya FUKATSU (The University of Tokyo)
AJCPP2018-157A Hybrid Particle-Fluid Simulation with Electron Inertia in a Hall Effect Thruster
Zhexu Wang (The University of Tokyo)
AJCPP2018-007Study on Effect of Cathode Position on SBS System Operation by Plume Diagnostics
Muhammad Safwatullah (Gifu University)
AJCPP2018-146Study on the Aerodynamics Performance of a Dual-Bell Nozzle
Kexin Wu (Andong National University)
AJCPP2018-018Improvement of Plasma Distribution by Propellant Injection Position in Miniature Microwave Discharge Water Ion Thrusters
Kengo Nakamura (Yokohama National University)
AJCPP2018-075A Conservative Overset Grid Method for Numerical Simulation of Propeller Slipstream
Cui Pengcheng (China Aerodynamics Research and Development Center Computa-tional Aerodynamics Institute)
AJCPP2018-097Aerodynamic Performance Study of Bionic Blade Inspired by the Seagull Wing Using Fluid-structure Interaction method
Fujia Hu(Xi’an Jiaotong University)
AJCPP2018-147Influence of the ambient pressure on the characterization of shock waves in the scramjet isolator
Yuan Ji (Shanghai Jiao Tong University)
AJCPP2018-163A ground combustion test facility for high altitude simulation
I.S. Yu (Chungnam National University)
-6-
GuangYi Meeting Room QiongLin Meeting Room LiQuan 1 Multi-function Hall LiQuan 2 Multi-function Hall