Post on 19-Feb-2018
7/23/2019 AirROC T35 D45 D50 Tech Spec
http://slidepdf.com/reader/full/airroc-t35-d45-d50-tech-spec 1/4
Hole range
Drill rig Pipe size Recommended hole range
AirROC D45 76 mm 3” 105-127 mm 4 1/8” - 5”
AirROC D50 76, 89, 102 mm 3”, 3 ½”, 4” 105-140 mm 4 1/8” - 5 1 / 2”
AirROC T35 38, 45 mm 1½”,1 3 / 4” 64-102 mm 2 ½” - 4”
AirROC T35, D45 and D50 are intented for construction, quarrying and open pit mining.
Main components:
• Pneumatic operated hydraulic power pack for hydraulic cylinders
• Pneumatic powered traction motors
•
Track chains with 260 mm track shoes• Hydraulic track oscillation
• Towing hook
• 7 bar and 14 bar for AirROC D45, and 20 Bar for AirROC D50 air line and oil lubrication system
• Single section boom system
• Pneumatic operated chain feed for 3 000 mm (10 ft.) drill tubes for AirROC D45, AirROC D50
• Pneumatic operated chain feed for 3 000-3610 mm (10-12 ft.) extension rods for AirROC T35
• Manual drill steel support
• Side-mounted drilling control panels
• Side-mounted tramming and positioning controls
• Extra air outlet for cleaning or running air tools (e.g. grinding equipment)
Atlas Copco Surface Drill Rigs
AirROC T35, D45 and D50Technical specification
7/23/2019 AirROC T35 D45 D50 Tech Spec
http://slidepdf.com/reader/full/airroc-t35-d45-d50-tech-spec 2/4
Optional equipment
Transport dimensions
Volumes
• Hydraulic oil tank ............................... 57 l 15 US gal• Hydraulic system, total ....................... 62 l 16.4 US gal• Traction gear ....................................... 2 l 0.53 US gal• Lubrication tank (HECL) ................... 7.6 l 2 US gal
All performance parameters above are valid for 7 bar air pressure
Steel feed
AirROC T35, AirROC D45, AirROC D50Pneumatic-driven chain feed• Feed extension ....................................1 219 mm 48”• Feed rate, max .................................... 0.25 m/s 49.2 ft/min
• Feed force, max ..................................21 kN 4 720 lbf • Tractive pull, max ...............................14 kN 3 372 lbf • Total length .........................................5 750 mm 226.3”• Travel length .......................................4 250 mm 167.3”
AirROC T35, D45 and D50
WeightWeight
Standard unit excluding all options and drill steel
4 800 kg 10 582 lb
Height and length
Tramming position
Height 2 250 mm 7’51 / 2”
Length 5 750 mm 226 1 / 2”
Transportation position
Height 2 430 mm 8’
Length 5 750 mm 18’10 1 / 2”
Width 2 480 mm 8’2”
Carrier
• Tramming speed, max ........................ 3 km/h 1.86 mph• Traction force, max ............................. 32.5 kN 7 306 lbf • Track oscillation ................................. ±10°• Ground clearance ................................ 254 mm 10”
• Hill climbing ability 30 deg max. (w/o compressor)
• Mechanical hole inclination instrument, type ROC ANGIE
• Water injection system with pneumatic pump• Water mist flushing system with pressurised tank
• Dust collector DCT 140 with rubber dust outlet - supplied with dust collection skirt or disc for AirROC D45, AirROC D50
• Manual Rod Changer (2 Rods) for AirROC D45, Air ROC D50
• Hydraulic elevated rackmounted on the right hand (opposite drilling control panel) crawler track
• Dust collector DCT 60 with rubber outlet for AirROC T35 - supplied with dust collector skirt or disc
2310
5750
2 4 3 0
20°
2310
5750
2 4 3 0
20°
260
2 4 8 0
2 1 8 0
Specifications
Transport position
7/23/2019 AirROC T35 D45 D50 Tech Spec
http://slidepdf.com/reader/full/airroc-t35-d45-d50-tech-spec 3/4
Vertical reach (mm)
AirROC T35, D45 and D50
Horizontal reach (mm)
Maximum horizontal reach (mm)
3 3 5 0
3 0 9 0
53°
2050
2720
2620
3 2 0 0
2 4 6 0
3 8 0
1 2 0 0
1 2 6 0
53°
40°
45°
R2350
R2050
1 4 5 0
1 0 6 0
1 7 6 0
1 5 9 0
1 0 3 0
42°
36°
Feed swing angle
Factory setup
Coverage areas
3620
2350
5 7 5 0
1 4 8 0
44°
Feed vertical on ground
7/23/2019 AirROC T35 D45 D50 Tech Spec
http://slidepdf.com/reader/full/airroc-t35-d45-d50-tech-spec 4/4
AirROC T35, D45 and D50
Component
P r o d u c -
t i o n
c o u n t r y
O p e r a t i n g
p r e s s u r e
( b a r )
A i r c o n -
s u m p t i o n
( l / s e c )
AirROC D50
AirROC
T35AirROC D45
17.2 bar10.3 bar 13.8 bar
TOP hammer
VL 140 India 7 250 250 250
Flushing
Drill Steel T 38 70
Drill Steel T 45 80
DTH hammer
TD 35 Sweden/
India
10.3/13.8/17.2 103/135/163 103 135 163
QL 40 USA/
India
10.3/13.8/17.2 116/160/206 116 160 206
COP 44 Sweden/
India
10.3/13.8/17.2 95/135/182 95 135 182
COP 54 Sweden 10.3/13.8/17.2 140/200/275 140 200 275
Chain feed
DD6 FM1+CMFM India 7 52 52 52 52 52 52 52 52 52 52 52
Rotation unit
BRH/ARH India 7 61 61 61 61 61 61 61 61 61
Total air consumption excl. DCT 216 229 208 253 248 273 248 313 372 382
Compressor recommendation
XAMS 426/926 (Mercedes/
CAT))
7 416 X X
XAH 210 (Cummins) 10.5 214 (X) (X) (X)
XAHS 675 (Cummins) 12 318 X X X X
XAVS 600 (Cummins) 14 283 X (X) (X) X
XAHS 236/506
(Mercedes/CAT)
12 235 (X) (X) X
XAHS 306/676
(Mercedes/CAT)
12 317 X X X X
Dust collector
DCT 140E India 6 65 65 65 65 65
DCT 60 India 6 25 25 25
Total air consumption incl. DCT 281 294 273 318 397 407
Compressor recommendation
XAMS 426/926
(Mercedes/CAT)
7 416 X (X)
XAHS 675 (Cummins)12 318 X (X) X X
XAHS 306/676
(Mercedes/CAT)
12 317 X (X) (X) (X)
XAHS 416/836
(Mercedes/CAT)
12 416 X
Air consumption and compressor recommendation
Note
(X) on the margin
Air consumptions given are required volume for the respective hammer/
drifter/DCT to function - additional volume of air required for flushing can
vary. This depends on drilling depth and rock formation.
9 8 5 1
2 6 2 8
0 1 b
P r i n t e d
i n
I n d i a
2 0 1 2 - 0 2
© C
o p y r i g h t 2 0 1 2 ,
A t l a s C o p c o ( I n d i a ) L i m i t e d ,
N a s i k . A l l p r o d u c t n a m e s i n t h i s p u b l i c a t i o n a r e t r a d e m a r k s o f A t l a
s C o p c o .
A n y u n a u t h o r i s e d u s e o r c o p y i n g o f t h e c o n t e n t s o r a n y p a r t t h e r e o f i s p r o h i b i t e d .
T h i s a p p l i e s i n p a r t i c u l a r t o t r a d e m a r k s , m o d e l d e n o m i n
a -
t i o n s , p a r t n u m b e r s a n d d r a w i n g s .
l l l u s t r a t i o n s a n d p h o t o s i n t h i s b r o c h u r e m a y s h o w e q u i p m e n t w i t h o p t i o n a l e x
t r a s .
S p e c i fi c a t i o n s a n d e q u i p m e n t s u b j e c t t o c h a n g e w i t h o u t n o t i c e .
C o n s u l t y o u r A t l a s C o p c o C u s t o m e r C e n t e r f o r s p e c i fi c i n f o r m a t i o n .