Post on 04-Feb-2022
Titan is your complete accessory source for Gas and Electric Sprayers
Sold exclusively through professional distributorsTitan Tool, Inc.1770 Fernbrook LaneMinneapolis, MN 554471-800-526-5362Fax 1-800-528-4826
International SalesTitan Tool, Inc.1770 Fernbrook LaneMinneapolis, MN 554471-201-337-1240Fax 1-201-405-7449
Visit us on the web at: www.titantool.comCall Tech Services at 1-800-526-5362 for complete warranty information.
All information contained in this brochure is based on the latest information available at time of printing. Titan reserves the right to make changes at any time, without notice.
Due to product branding conversions, units may be changing over time. Please call your local distributor, sales rep, or Titan customer service line for specific details
Titan Tool of Canada200 Trowers Road, Unit 7BWoodbridge, Ontario L4L-5Z81-800-565-8665Fax 1-905-856-8496
Airless Accessories
SL40125 JB51021A
Airless Accessories
CONTENTSAluminum Airless Gun . . . . . . . . 4-5Stainless Steel Guns . . . . . . . . . . 6-7Airless Tips . . . . . . . . . . . . . . . . . 8-9Tip Technology . . . . . . . . . . . . 10-11Guards & Filters . . . . . . . . . . . 12-13Reach Tools . . . . . . . . . . . . . . 14-17 Rollers . . . . . . . . . . . . . . . . . . 18-19Hoses . . . . . . . . . . . . . . . . . . . 20-21Liquids . . . . . . . . . . . . . . . . . 22-23Manifolds . . . . . . . . . . . . . . . . 24-25DT Steamer / PaintEater® . . . . . . . 26Modular Manifolds . . . . . . . . . . .27
Airless Accessories
Why Titan Genuine Parts and Accessories?ADVANCED PERFORMANCE• TITANairlessaccessoriesaredesignedBYprofessionalsFORprofessionals• Ouraccessoriesandequipmentarebuiltforhardworkandlonglife• Thelatestengineeringtechnologyensureseaseofuseanddependability• Ouraccessoriesandequipmentmeetandexceedtheexpectationsof
professionalswhowanttodothejobrighttheFIRSTtime.
TOTALRELIABILITY• Proventechnology-youfinisheveryprojectquicklyandprofitably• Superiordesignandconstructionmaximizestheservicelifeofyour
accessories and equipment• Completediversity–wehavetherightequipmentforeveryprojectand
sprayer application• Halfacenturyofgettingthejobdoneright–TITANisthenameyoutrust
UNSURPASSEDSERVICE• Dependable,reliablenetworkofauthorizedsalesandservicedistributors• Thebestcustomerserviceintheindustrytohelpyouselecttheright
equipment and accessories• Professionalapplicationandservicerepresentativesreadytoassistyouwith
recommendations and technical support
FORTHEBEST,MOSTPROFESSIONALRESULTS– USEONLYGENUINETITANPARTSANDACCESSORIES
Residential
Commercial
Roofing
Fine Finish
Complete Source for Genuine Parts and Accessories THE POWER OF
CONTENTSAluminum Airless Gun . . . . . . . . 4-5Stainless Steel Guns . . . . . . . . . . 6-7Airless Tips . . . . . . . . . . . . . . . . . 8-9Tip Technology . . . . . . . . . . . . 10-11Guards & Filters . . . . . . . . . . . 12-13Reach Tools . . . . . . . . . . . . . . 14-17 Rollers . . . . . . . . . . . . . . . . . . 18-19Hoses . . . . . . . . . . . . . . . . . . . 20-21Liquids . . . . . . . . . . . . . . . . . 22-23Manifolds . . . . . . . . . . . . . . . . 24-25DT Steamer / PaintEater® . . . . . . . 26Modular Manifolds . . . . . . . . . . .27
Airless Accessories
Why Titan Genuine Parts and Accessories?ADVANCED PERFORMANCE• TITANairlessaccessoriesaredesignedBYprofessionalsFORprofessionals• Ouraccessoriesandequipmentarebuiltforhardworkandlonglife• Thelatestengineeringtechnologyensureseaseofuseanddependability• Ouraccessoriesandequipmentmeetandexceedtheexpectationsof
professionalswhowanttodothejobrighttheFIRSTtime.
TOTALRELIABILITY• Proventechnology-youfinisheveryprojectquicklyandprofitably• Superiordesignandconstructionmaximizestheservicelifeofyour
accessories and equipment• Completediversity–wehavetherightequipmentforeveryprojectand
sprayer application• Halfacenturyofgettingthejobdoneright–TITANisthenameyoutrust
UNSURPASSEDSERVICE• Dependable,reliablenetworkofauthorizedsalesandservicedistributors• Thebestcustomerserviceintheindustrytohelpyouselecttheright
equipment and accessories• Professionalapplicationandservicerepresentativesreadytoassistyouwith
recommendations and technical support
FORTHEBEST,MOSTPROFESSIONALRESULTS– USEONLYGENUINETITANPARTSANDACCESSORIES
Residential
Commercial
Roofing
Fine Finish
Complete Source for Genuine Parts and Accessories THE POWER OF
5.4.
TITAN™
AIRLESS GUNS
Features & Benefits
•Availableon4fingertrigger or 2 finger trigger.
•Allmetalconstruction.
•Tungstencarbideballvalve,seat & stainless steel swivel insures long life & durability.
•In-handlefilterreducesclogging & increases tip life.
•Swivelreduceshosekinks&assureseffortless control.
•Includes517SC-6reversibletip.
•Pressureratedat3600PSI(25MPa).
•Lightweight,only20ounces(0.63kg).
Features & Benefits
•Availablein4fingertrigger or 2 finger trigger.
•Allmetalconstruction.
•Tungstencarbideballvalve,seat & stainless steel swivel insures long life & durability.
•In-handlefilterreducesclogging & increases tip life.
•Swivelreduceshosekinks&assureseffortless control.
•Includes517SC-6reversibletip.
•Pressureratedat3600PSI(25MPa).
•Lightweight,only20ounces(0.63kg).
Features & Benefits
•Uniquetwo-piecesealassembly design allows removal of just the ball for easy maintenance.
•Ultra-lighttriggerpull&formfittinghandlereduceshand fatigue.
•Reversibletungstencarbideseatofferstwicethelifeof standard diffusers.
•Allmetalconstruction.
•Swivelreduceshosekinks.
•In-handlefilterhelpsreducetipclogs & increase tip life.
•Pressureratedat3600PSI(25MPa).
•Includes517SC-6reversibletip.
LX-80II Airless Gun
LX-80PlatinumSeries
G-10XLAirlessGunProductNo.0296235(4FingerTrigger)
ProductNo.0296236(2FingerTrigger)
4FingerGunHoseTipKit 0296326
2FingerGunHoseTipKit 0296327
LX-40AirlessGunPartNo.550-540 (2FingerTrigger) ProductNo.580-100A(4FingerTrigger)
ProductNo.581-085(2FingerTrigger)
4FingerGunHoseTipKit 580-050
2FingerGunHoseTipKit 581-150
Gun 584-100
GunHoseTipKit 584-050
Features & Benefits
•All-metalconstruction
•In-handlefilter
•Tungstencarbideballvalveensureslonglife
•Includes517SC-6™reversibletip
•Pressureratedat3000PSI(20.7MPa)
2 Finger Gun
4 Finger Gun
2 Finger Gun
4 Finger Gun
Exterior
Interior
TITAN is an industry leader in sprayer gun technologyCountless hours of research and development have been devoted to manufacturing a full line of the best qualityTITANairlessgunsforeveryapplication imaginable - from the thinnest lacquers to the heaviest textures and roof coatings.
•Designedtominimizehandfatigue
•Solid,safeconstruction
•Precisiontriggerforaccuratedelivery
5.4.
TITAN™
AIRLESS GUNS
Features & Benefits
•Availableon4fingertrigger or 2 finger trigger.
•Allmetalconstruction.
•Tungstencarbideballvalve,seat & stainless steel swivel insures long life & durability.
•In-handlefilterreducesclogging & increases tip life.
•Swivelreduceshosekinks&assureseffortless control.
•Includes517SC-6reversibletip.
•Pressureratedat3600PSI(25MPa).
•Lightweight,only20ounces(0.63kg).
Features & Benefits
•Availablein4fingertrigger or 2 finger trigger.
•Allmetalconstruction.
•Tungstencarbideballvalve,seat & stainless steel swivel insures long life & durability.
•In-handlefilterreducesclogging & increases tip life.
•Swivelreduceshosekinks&assureseffortless control.
•Includes517SC-6reversibletip.
•Pressureratedat3600PSI(25MPa).
•Lightweight,only20ounces(0.63kg).
Features & Benefits
•Uniquetwo-piecesealassembly design allows removal of just the ball for easy maintenance.
•Ultra-lighttriggerpull&formfittinghandlereduceshand fatigue.
•Reversibletungstencarbideseatofferstwicethelifeof standard diffusers.
•Allmetalconstruction.
•Swivelreduceshosekinks.
•In-handlefilterhelpsreducetipclogs & increase tip life.
•Pressureratedat3600PSI(25MPa).
•Includes517SC-6reversibletip.
LX-80II Airless Gun
LX-80PlatinumSeries
G-10XLAirlessGunProductNo.0296235(4FingerTrigger)
ProductNo.0296236(2FingerTrigger)
4FingerGunHoseTipKit 0296326
2FingerGunHoseTipKit 0296327
LX-40AirlessGunPartNo.550-540 (2FingerTrigger) ProductNo.580-100A(4FingerTrigger)
ProductNo.581-085(2FingerTrigger)
4FingerGunHoseTipKit 580-050
2FingerGunHoseTipKit 581-150
Gun 584-100
GunHoseTipKit 584-050
Features & Benefits
•All-metalconstruction
•In-handlefilter
•Tungstencarbideballvalveensureslonglife
•Includes517SC-6™reversibletip
•Pressureratedat3000PSI(20.7MPa)
2 Finger Gun
4 Finger Gun
2 Finger Gun
4 Finger Gun
Exterior
Interior
TITAN is an industry leader in sprayer gun technologyCountless hours of research and development have been devoted to manufacturing a full line of the best qualityTITANairlessgunsforeveryapplication imaginable - from the thinnest lacquers to the heaviest textures and roof coatings.
•Designedtominimizehandfatigue
•Solid,safeconstruction
•Precisiontriggerforaccuratedelivery
7.6.
TITAN™
AIRLESS GUNSSTAINLESS STEEL
• Stainlesssteelfluidpassages.
• In-handlefilter
• Availableintwoswivelsizesforlessrestriction.
• Tungstencarbideballvalve&seatinsureslonglife&durability.
• Easy4fingertriggerpull.
• Swivelreduceshosekinks.
• Includes517heavy-duty reversible tip.
• Pressureratedat7700PSI(53MPa).
Features & Benefits
•Stainlesssteelfluidpassages.
•In-handlefilter
•Tungstencarbideballvalve&seatensures long life & durability.
•Easy4fingertriggerpull.
•1/4”Swivelreduceshosekinks.
•Includes517SC-6reversibletip.
•Pressureratedat3900PSI(27MPa).
Features & Benefits
• Allmetalconstruction.
• Stainlesssteelfluidpassages.
• Tungstencarbideballvalve&seat ensures long life & durability.
• Pressureratedat5000PSI(34.5MPa).
• Frontfeed,filterlessdesignforheavycoatings.
• Easy2fingertriggerpull.
• Includes517SC-6reversibletip.
S-3AirlessGun
S-5AirlessGun
S-7AirlessGun Gun 550-250
GunHoseTipKit 550-460
Gun 550-100
GunHoseTipKit 550-110
1/4”SwivelProductNo. 550-260
3/8”SwivelProductNo. 550-270
Commercial
Industrial
TITAN is an industry leader in sprayer gun technologyFor centuries it has been the ultimate expression of metallic strength. Stainless steel is the strongest, most powerful, most durable and reliable alloy ever created.Itwasusedtoforgeswords,armor and cannons and, for decades, has forged the best spray guns in the world –gunsthatcanhandlehigherpressuresandspecializedcoatings.
7.6.
TITAN™
AIRLESS GUNSSTAINLESS STEEL
• Stainlesssteelfluidpassages.
• In-handlefilter
• Availableintwoswivelsizesforlessrestriction.
• Tungstencarbideballvalve&seatinsureslonglife&durability.
• Easy4fingertriggerpull.
• Swivelreduceshosekinks.
• Includes517heavy-duty reversible tip.
• Pressureratedat7700PSI(53MPa).
Features & Benefits
•Stainlesssteelfluidpassages.
•In-handlefilter
•Tungstencarbideballvalve&seatensures long life & durability.
•Easy4fingertriggerpull.
•1/4”Swivelreduceshosekinks.
•Includes517SC-6reversibletip.
•Pressureratedat3900PSI(27MPa).
Features & Benefits
• Allmetalconstruction.
• Stainlesssteelfluidpassages.
• Tungstencarbideballvalve&seat ensures long life & durability.
• Pressureratedat5000PSI(34.5MPa).
• Frontfeed,filterlessdesignforheavycoatings.
• Easy2fingertriggerpull.
• Includes517SC-6reversibletip.
S-3AirlessGun
S-5AirlessGun
S-7AirlessGun Gun 550-250
GunHoseTipKit 550-460
Gun 550-100
GunHoseTipKit 550-110
1/4”SwivelProductNo. 550-260
3/8”SwivelProductNo. 550-270
Commercial
Industrial
TITAN is an industry leader in sprayer gun technologyFor centuries it has been the ultimate expression of metallic strength. Stainless steel is the strongest, most powerful, most durable and reliable alloy ever created.Itwasusedtoforgeswords,armor and cannons and, for decades, has forged the best spray guns in the world –gunsthatcanhandlehigherpressuresandspecializedcoatings.
8.
TITAN™
AIRLESS TIPS
Commercial
ContractorsknowthequalityofaspraytipcanmakeorbreakaprojectThat is why smart contractors don’t take a chance on cheap tips that wear out quickly, waste coatings and deliver anunevenfinish.TITANairlesstipsare renowned in the industry for their strength, durability and long life. • Titanoffersafullspectrumofsprayertipsfora
full range of applications
• Highestqualitytungstencarbideyieldsthelongest tip life
• Precisionmachinedforaperfectfanpattern
• Solvent-proofsealholdsupagainstharshestcoatings
There is no substitute for a TITAN tip.
Features & Benefits
“LongestLastingTipintheIndustry”
•Highestqualitytungstencarbideassures longest life, durability, and fewer passes for better coverage.
•Exclusiveflowindicatorindicatesthattip is in spray or clean position.
•Ergonomicdesignassurescomfortwhen rotating to spray or reverse position for cleaning.
Features & Benefits
•Particlesizeupto27%smallerthanastandardtip.
•Interchangeablewithindustrystandardsafetyguards.
•Idealforlacquers,stains,andclearcoats.
•Increasedtransferefficiency.
Features & Benefits
•Perfectforhighproductionapplications.
•Increaseproductionupto100%.
•Widespraywillsaveyoutimeandmoney.
Features & Benefits
•Heavydutyreversibletip.
•Pressureratedto7700psi.
Features & Benefits
•PrecisionmachinedfromthehighestqualityTungstenCarbide.
Features & Benefits
•Fullyadjustablefanwidthsfrom2”to24”reduceoverspray.
•Perfectwhenchangingfromsprayingwallstocuttinginfor trimworkoraroundwindows.
•Self-cleaningfeatureeliminatescostlydowntime.
Product no. 661-XXX
Product no. 661-XXXX
Product no. 671-XXX
Product no. 721-XXX
Product no. 002-XXX
Product no. 341-XXX
Product no. 512-XXX
SC-6ReversibleTip
SYNERGY™Tip
WideSpray™Tip
HighPressureTip
Adjustable Self Cleaning Tip
Availableinthefollowingsizes:1219 1223 1227 1231 12351221 1225 1229 1233 1237
Availableinthefollowingsizes: 208 210 212 214 308 310 312 314 408 410 412 414 510 512 612
Availableinthefollowingorificesizes: (numerousfanwidthsavailable)007 015 023 031 052009 017 025 033 062011 019 027 035 072013 021 029 037
Availableinthefollowingorificesizes: (numerousfanwidthsavailable)007 015 023 031009 017 025 033011 019 027 035013 021 029 037
Availableinthefollowingorificesizes:117 217 517 525 533119 219 519 527 535 221 521 529 539123 223 523 531
Product Number Orifice Range Coating Range341-015 .005-.018 Lacquer&Stain341-020 .007-.019 Lacquer&Stain341-024 .007-.026 Lacquer&Enamals341-028 .011-.026 Lacquer&Enamals341-041 .017-.035 HighBuilds341-049 .021-.054 VeryHeavy
ProductNumber OrificeinInches Max.TipSizeRecomended512-011 .011 .007512-013 .013 .009512-015 .015 .011512-018 .018 .013512-021 .021 .017512-023 .023 .019512-026 .026 .021512-031 .031 .026512-035 .035 .031512-039 .039 .035512-043 .043 .039512-049 .049 .043512-059 .059 .045
• Designedtoproduceamorecompleteatomizationofthespraypattern.
• Increasesyourtransferefficiencybyallowingyoutosprayatlowerpressures.
• Whenordering,alwaysuseameteringorificethatisatleast.004larger thanthespraytipbeingused.Example:a.019tipshouldbeusedwitha.023MeteringOrifice.
FineFinishMeteringOrifice
Flat Tip
9.
8.
TITAN™
AIRLESS TIPS
Commercial
ContractorsknowthequalityofaspraytipcanmakeorbreakaprojectThat is why smart contractors don’t take a chance on cheap tips that wear out quickly, waste coatings and deliver anunevenfinish.TITANairlesstipsare renowned in the industry for their strength, durability and long life. • Titanoffersafullspectrumofsprayertipsfora
full range of applications
• Highestqualitytungstencarbideyieldsthelongest tip life
• Precisionmachinedforaperfectfanpattern
• Solvent-proofsealholdsupagainstharshestcoatings
There is no substitute for a TITAN tip.
Features & Benefits
“LongestLastingTipintheIndustry”
•Highestqualitytungstencarbideassures longest life, durability, and fewer passes for better coverage.
•Exclusiveflowindicatorindicatesthattip is in spray or clean position.
•Ergonomicdesignassurescomfortwhen rotating to spray or reverse position for cleaning.
Features & Benefits
•Particlesizeupto27%smallerthanastandardtip.
•Interchangeablewithindustrystandardsafetyguards.
•Idealforlacquers,stains,andclearcoats.
•Increasedtransferefficiency.
Features & Benefits
•Perfectforhighproductionapplications.
•Increaseproductionupto100%.
•Widespraywillsaveyoutimeandmoney.
Features & Benefits
•Heavydutyreversibletip.
•Pressureratedto7700psi.
Features & Benefits
•PrecisionmachinedfromthehighestqualityTungstenCarbide.
Features & Benefits
•Fullyadjustablefanwidthsfrom2”to24”reduceoverspray.
•Perfectwhenchangingfromsprayingwallstocuttinginfor trimworkoraroundwindows.
•Self-cleaningfeatureeliminatescostlydowntime.
Product no. 661-XXX
Product no. 661-XXXX
Product no. 671-XXX
Product no. 721-XXX
Product no. 002-XXX
Product no. 341-XXX
Product no. 512-XXX
SC-6ReversibleTip
SYNERGY™Tip
WideSpray™Tip
HighPressureTip
Adjustable Self Cleaning Tip
Availableinthefollowingsizes:1219 1223 1227 1231 12351221 1225 1229 1233 1237
Availableinthefollowingsizes: 208 210 212 214 308 310 312 314 408 410 412 414 510 512 612
Availableinthefollowingorificesizes: (numerousfanwidthsavailable)007 015 023 031 052009 017 025 033 062011 019 027 035 072013 021 029 037
Availableinthefollowingorificesizes: (numerousfanwidthsavailable)007 015 023 031009 017 025 033011 019 027 035013 021 029 037
Availableinthefollowingorificesizes:117 217 517 525 533119 219 519 527 535 221 521 529 539123 223 523 531
Product Number Orifice Range Coating Range341-015 .005-.018 Lacquer&Stain341-020 .007-.019 Lacquer&Stain341-024 .007-.026 Lacquer&Enamals341-028 .011-.026 Lacquer&Enamals341-041 .017-.035 HighBuilds341-049 .021-.054 VeryHeavy
ProductNumber OrificeinInches Max.TipSizeRecomended512-011 .011 .007512-013 .013 .009512-015 .015 .011512-018 .018 .013512-021 .021 .017512-023 .023 .019512-026 .026 .021512-031 .031 .026512-035 .035 .031512-039 .039 .035512-043 .043 .039512-049 .049 .043512-059 .059 .045
• Designedtoproduceamorecompleteatomizationofthespraypattern.
• Increasesyourtransferefficiencybyallowingyoutosprayatlowerpressures.
• Whenordering,alwaysuseameteringorificethatisatleast.004larger thanthespraytipbeingused.Example:a.019tipshouldbeusedwitha.023MeteringOrifice.
FineFinishMeteringOrifice
Flat Tip
9.
11.10.
TITAN™
TIP TECHNOLOGY
Airlessspraytipsareakeycomponent
to the successful operation of an airless
spray system. They define the spray
pattern, control the flow of the coating
being sprayed & ultimately tell the
pumphowharditmustwork.Aproper
understanding of airless tips is critical to
the success of any airless application.
Airless Spray Tip CharacteristicsIt is important to remember that the
orificesize,inconjunctionwiththe
fan-widthsize,determinesthespray
characteristics of the tip.
Examples: The larger the orifice with the same fan width, the greater the volume of
paint applied to the same area.
When beginning a project, choosing
therighttipsize&fanwidthwill
determine how profitable you will be
through both coating consumption &
productiontime.Ifthetipsizebeing
used is wrong — by either choice
orthroughwear—milthicknesses
will be too heavy & the finish will be
unprofessional.
The spray pattern chart demonstrates
what happens as a tip wears. As wear
occurs,thepatternsizedecreases&
theorificesizeincreases.Youwillfind
thatyouhavetomakemorepasses
to cover the same area. There is no
standard rate of tip wear due to the
variation of the abrasiveness of all
coatings.Replaceyourtipsafter100
gallons(378liters);it’soneofthe
most profitable things you can do.
661-519First 3 digits specify either SC-6 or Flat Last two digits specifystyle: 661=SC-6Style theorificesize 002 = Flat Style
EXAMPLE: Product Number 661-519 is:•SC-6ReversibleTip•10”-12”FanPattern•.019orifice
When ordering airless spray tips from this chart, precede the tip number with “661” for SC-6 & “002” for Flat.
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.007 2”-4” .05 107(.018 cm) 4”-6” (.2 lpm) 207 6”-8” 307 8”-10” 407.009 2”-4” .08 109(.023 cm) 4”-6” (.3 lpm) 209 6”-8” 309 8”-10” 409 10”-12” 509 12”-14” 609.011 2”-4” .12 111(.028 cm) 4”-6” (.5 lpm) 211 6”-8” 311 8”-10” 411 10”-12” 511 12”-14” 611 14”-16” 711 16”-18” 811 18”-20” 911.013 2”-4” .18 113(.032 cm) 4”-6” (.7 lpm) 213 6”-8” 313 8”-10” 413 10”-12” 513 12”-14” 613 14”-16” 713 16”-18” 813 18”-20” 913.015 2”-4” .23 115 (.038 cm) 4”-6” (.9 lpm) 215 6”-8” 315 8”-10” 415 10”-12” 515 12”-14” 615 14”-16” 715 16”-18” 815 18”-20” 915 .017 2”-4” .30 117 (.043 cm) 4”-6” (1.1lpm) 217 6”-8” 317 8”-10” 417 10”-12” 517 12”-14” 617 14”-16” 717 16”-18” 817 18”-20” 917
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.019 4”-6” .40 219(.048 cm) 6”-8” (1.5 lpm) 319 8”-10” 419 10”-12” 519 12”-14” 619 14”-16” 719 16”-18” 819 18”-20” 919
.021 4”-6” .47 221 (.053 cm) 6”-8” (1.7 lpm) 321 8”-10” 421 10”-12” 521 12”-14” 621 14”-16” 721 16”-18” 821 18”-20” 921 20”-22” 1021.023 4”-6” .57 223(.058 cm) 6”-8” (2.1 lpm) 323 8”-10” 423 10”-12” 523 12”-14” 623 14”-16” 723 16”-18” 823 18”-20” 923 20”-22” 1023 .025 4”-6” .66 225 (.064 cm) 6”-8” (2.5 lpm) 325 8”-10” 425 10”-12” 525 12”-14” 625 14”-16” 725 16”-18” 825 18”-20” 925 .027 6”-8” .77 327(.069 cm) 8”-10” (2.9 lpm) 427 10”-12” 527 12”-14” 627 14”-16” 727 16”-18” 827 18”-20” 927.029 10”-12” .88 529(.074 cm) 12”-14” (3.3 lpm) 629
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.031 6”-8” 1.1 331 (.078 cm) 8”-10” (4.1 lpm) 431 10”-12” 531 12”-14” 631 14”-16” 731 16”-18” 831 18”-20” 931.033 10”-12” 1.2 533(.084 cm) 12”-14” (4.5 lpm) 633 .035 6”-8” 1.3 335 (.089 cm) 8”-10” (4.9 lpm) 435 10”-12” 535 12”-14” 635 14”-16” 735 16”-18” 835.039 8”-10” 1.65 439(.099 cm) 10”-12” (6.2 lpm) 539 12”-14” 639 16”-18” 839 .043 8”-10” 2.05 443(.109 cm) 10”-12” (7.8 lpm) 543 22”-24” 1143Thefollowingsizesareavailablein Flat Tip Only:.052 10”-12” 3.0 552 (.132 cm) 22”-24” (11.3 lpm) 1152.062 10”-12” 4.25 562(.157 cm) (16 lpm) .072 10”-12” 5.75 572
(.182 cm) (22 lpm)
Spray width measured with gun tip 12 inches (30cm)fromworksurface.Othersizesavailable, call 800-526-5362 for more information.*SizesAvailableasaflattiponlyare
bold&italicized.
Double the first digit after the hyphento determine the fan width when tip is12” from the surface being sprayed
UnderstandingAirlessTips
Tip Wear
UnderstandingTipProductNumbers
Conversely, the larger the fan width with the same orifice means the same amount of material is being applied over a greater area. The result is less volume of paint per squareinch.
FanWidth: 10” 10” 10”
OrificeSize: .017 .021 .026
TipNo.: 517 521 526
Least Volume More Volume Most Volume
FanWidth: 8” 12” 16”
OrificeSize: .017 .017 .017
TipNo.: 417 617 817
Spray Pattern Width
New Worn to Worn to Worn to
517 419 321 223
Flow Rate
.30gpm .40gpm .47gpm .57gpm
(1.1lpm) (1.5lpm) (1.7lpm) (2.1lpm)
Flow Rate Increase
33% 57% 90%
11.10.
TITAN™
TIP TECHNOLOGY
Airlessspraytipsareakeycomponent
to the successful operation of an airless
spray system. They define the spray
pattern, control the flow of the coating
being sprayed & ultimately tell the
pumphowharditmustwork.Aproper
understanding of airless tips is critical to
the success of any airless application.
Airless Spray Tip CharacteristicsIt is important to remember that the
orificesize,inconjunctionwiththe
fan-widthsize,determinesthespray
characteristics of the tip.
Examples: The larger the orifice with the same fan width, the greater the volume of
paint applied to the same area.
When beginning a project, choosing
therighttipsize&fanwidthwill
determine how profitable you will be
through both coating consumption &
productiontime.Ifthetipsizebeing
used is wrong — by either choice
orthroughwear—milthicknesses
will be too heavy & the finish will be
unprofessional.
The spray pattern chart demonstrates
what happens as a tip wears. As wear
occurs,thepatternsizedecreases&
theorificesizeincreases.Youwillfind
thatyouhavetomakemorepasses
to cover the same area. There is no
standard rate of tip wear due to the
variation of the abrasiveness of all
coatings.Replaceyourtipsafter100
gallons(378liters);it’soneofthe
most profitable things you can do.
661-519First 3 digits specify either SC-6 or Flat Last two digits specifystyle: 661=SC-6Style theorificesize 002 = Flat Style
EXAMPLE: Product Number 661-519 is:•SC-6ReversibleTip•10”-12”FanPattern•.019orifice
When ordering airless spray tips from this chart, precede the tip number with “661” for SC-6 & “002” for Flat.
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.007 2”-4” .05 107(.018 cm) 4”-6” (.2 lpm) 207 6”-8” 307 8”-10” 407.009 2”-4” .08 109(.023 cm) 4”-6” (.3 lpm) 209 6”-8” 309 8”-10” 409 10”-12” 509 12”-14” 609.011 2”-4” .12 111(.028 cm) 4”-6” (.5 lpm) 211 6”-8” 311 8”-10” 411 10”-12” 511 12”-14” 611 14”-16” 711 16”-18” 811 18”-20” 911.013 2”-4” .18 113(.032 cm) 4”-6” (.7 lpm) 213 6”-8” 313 8”-10” 413 10”-12” 513 12”-14” 613 14”-16” 713 16”-18” 813 18”-20” 913.015 2”-4” .23 115 (.038 cm) 4”-6” (.9 lpm) 215 6”-8” 315 8”-10” 415 10”-12” 515 12”-14” 615 14”-16” 715 16”-18” 815 18”-20” 915 .017 2”-4” .30 117 (.043 cm) 4”-6” (1.1lpm) 217 6”-8” 317 8”-10” 417 10”-12” 517 12”-14” 617 14”-16” 717 16”-18” 817 18”-20” 917
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.019 4”-6” .40 219(.048 cm) 6”-8” (1.5 lpm) 319 8”-10” 419 10”-12” 519 12”-14” 619 14”-16” 719 16”-18” 819 18”-20” 919
.021 4”-6” .47 221 (.053 cm) 6”-8” (1.7 lpm) 321 8”-10” 421 10”-12” 521 12”-14” 621 14”-16” 721 16”-18” 821 18”-20” 921 20”-22” 1021.023 4”-6” .57 223(.058 cm) 6”-8” (2.1 lpm) 323 8”-10” 423 10”-12” 523 12”-14” 623 14”-16” 723 16”-18” 823 18”-20” 923 20”-22” 1023 .025 4”-6” .66 225 (.064 cm) 6”-8” (2.5 lpm) 325 8”-10” 425 10”-12” 525 12”-14” 625 14”-16” 725 16”-18” 825 18”-20” 925 .027 6”-8” .77 327(.069 cm) 8”-10” (2.9 lpm) 427 10”-12” 527 12”-14” 627 14”-16” 727 16”-18” 827 18”-20” 927.029 10”-12” .88 529(.074 cm) 12”-14” (3.3 lpm) 629
Orifice Fan GPM Flat&SC-6SizeIn WidthIn Flow TipInches Inches Rate Number*
.031 6”-8” 1.1 331 (.078 cm) 8”-10” (4.1 lpm) 431 10”-12” 531 12”-14” 631 14”-16” 731 16”-18” 831 18”-20” 931.033 10”-12” 1.2 533(.084 cm) 12”-14” (4.5 lpm) 633 .035 6”-8” 1.3 335 (.089 cm) 8”-10” (4.9 lpm) 435 10”-12” 535 12”-14” 635 14”-16” 735 16”-18” 835.039 8”-10” 1.65 439(.099 cm) 10”-12” (6.2 lpm) 539 12”-14” 639 16”-18” 839 .043 8”-10” 2.05 443(.109 cm) 10”-12” (7.8 lpm) 543 22”-24” 1143Thefollowingsizesareavailablein Flat Tip Only:.052 10”-12” 3.0 552 (.132 cm) 22”-24” (11.3 lpm) 1152.062 10”-12” 4.25 562(.157 cm) (16 lpm) .072 10”-12” 5.75 572
(.182 cm) (22 lpm)
Spray width measured with gun tip 12 inches (30cm)fromworksurface.Othersizesavailable, call 800-526-5362 for more information.*SizesAvailableasaflattiponlyare
bold&italicized.
Double the first digit after the hyphento determine the fan width when tip is12” from the surface being sprayed
UnderstandingAirlessTips
Tip Wear
UnderstandingTipProductNumbers
Conversely, the larger the fan width with the same orifice means the same amount of material is being applied over a greater area. The result is less volume of paint per squareinch.
FanWidth: 10” 10” 10”
OrificeSize: .017 .021 .026
TipNo.: 517 521 526
Least Volume More Volume Most Volume
FanWidth: 8” 12” 16”
OrificeSize: .017 .017 .017
TipNo.: 417 617 817
Spray Pattern Width
New Worn to Worn to Worn to
517 419 321 223
Flow Rate
.30gpm .40gpm .47gpm .57gpm
(1.1lpm) (1.5lpm) (1.7lpm) (2.1lpm)
Flow Rate Increase
33% 57% 90%
13.12.
TITAN™
GUARDS & FILTERS
Seals•Solventresistantwhiteseal...651-020
•Solventresistantwhiteseal,6pack...661-021
•Metalretainer...651-040
•Solventresistantseal&retainerkit,5pieces...661-020
•Solventresistantseal&retainerkit,12pieces...661-060
•Latexblackseal...651-042
SC-6Guard
Safety Guard
Features & Benefits
•Designallowsguardtobeinstalledwithouttools.
•Sealcavityonsafetyguardhaslarge“flats” forquick&easyinstallationofseal.
•ForusewithTitanSC-6tiponly.
•Interchangeablewithmostcompetitivebases.
Gun & Pump Filters
For use with G-10, LX-70, S-3 and S-7.For use with LX-80II & LX-80 Platinum
*Manifold Filter for 330 & 440.
Features & Benefits
Designedforaddedfiltrationorwhenusingagunwithout
afilter,thisIn-Linefilterattacheseasilybetweenstandard
airless hoses.
In-LineFilter
ForuseonTitan640LX,1140LX,&
IMPACT440-1640
TitanInletScreens(Small)
Speeflo Inlet Screens
TitanInletScreens(Large)
PumpManifoldFilters
*Note: Standard with sprayer, excludes ball. Ball Check
sold separately 920-103
*Note: Standard with sprayer, includes ball.
Never operate your siphon or direct immersion airless pump without this in place. Also
knownasa“rockcatcher”,thisproductservesasafilteringscreen&preventsany
debris from entering the fluid section that can cause damage & expensive repairs.
Inlet Screens
Product No. 661-012
661-012 7/8”-14 Titan,Wagner Graco,SprayTECH,ASM
450-100A 7/8”-14 Titan,Wagner,Graco SprayTECH,ASM
Mesh ProductNo.Coarse-30mesh 730-067-30Medium-60mesh 730-067Fine-100mesh 730-067-10
Mesh ProductNo.30mesh(Fine) 700-90010mesh(Coarse) 700-805
Units ProductNo.4900,6900,8900,12000GH 103-627AllGHD&DIUnits 710-046HydraProIV 103-627
Mesh ProductNo.30mesh(Fine) 710-19110mesh(Coarse) 710-046
ForuseonTitanE15,E20,G40&G55
Mesh ProductNo.Coarse-30mesh 761-042Medium-60mesh 761-043Fine-100mesh 761-041
ForuseonPowrTwin3500,
4500,&Hydra
MeshNo. ProductNo.Coarse-5mesh 920-001*Medium-50mesh 920-004Fine-100mesh 920-005
MeshNo. ProductNo.Mastic-0mesh 930-004Coarse-5mesh 930-005*Medium-50mesh 930-006Fine-100mesh 930-007
Filters Product No.*Coarse(Green) 500-200-03Medium(White) 500-200-06Fine(Yellow) 500-200-10ExtraFine(Red) 500-200-15
Filters Product No.Coarse(Green) 550-484Medium(White) 550-483Fine(Yellow) 550-485ExtraFine(Red) 550-486
ForuseonSpeefloPowrTwin5500,
4900,6900,8900,10000&12000
Threaded Unthreaded
ProductNo. 550-223
Reverse thread design prevents filter from unscrewing when handle is removed for
cleaning&replacement.Packagedtwoperpack.
Residential
ManifoldFilter
Nothing destroys a piston or a gun tip faster than debris in the coating. That’s why you need the best paint filters available.TITANgunfiltersandmanifoldfilters are designed for long life and maximum protection.
•Madefromstainlesssteelforstrengthand service
•Widevarietyofmeshsizesfrom 10 to 100
•Engineeredfordurabilityandlonglife
13.12.
TITAN™
GUARDS & FILTERS
Seals•Solventresistantwhiteseal...651-020
•Solventresistantwhiteseal,6pack...661-021
•Metalretainer...651-040
•Solventresistantseal&retainerkit,5pieces...661-020
•Solventresistantseal&retainerkit,12pieces...661-060
•Latexblackseal...651-042
SC-6Guard
Safety Guard
Features & Benefits
•Designallowsguardtobeinstalledwithouttools.
•Sealcavityonsafetyguardhaslarge“flats” forquick&easyinstallationofseal.
•ForusewithTitanSC-6tiponly.
•Interchangeablewithmostcompetitivebases.
Gun & Pump Filters
For use with G-10, LX-70, S-3 and S-7.For use with LX-80II & LX-80 Platinum
*Manifold Filter for 330 & 440.
Features & Benefits
Designedforaddedfiltrationorwhenusingagunwithout
afilter,thisIn-Linefilterattacheseasilybetweenstandard
airless hoses.
In-LineFilter
ForuseonTitan640LX,1140LX,&
IMPACT440-1640
TitanInletScreens(Small)
Speeflo Inlet Screens
TitanInletScreens(Large)
PumpManifoldFilters
*Note: Standard with sprayer, excludes ball. Ball Check
sold separately 920-103
*Note: Standard with sprayer, includes ball.
Never operate your siphon or direct immersion airless pump without this in place. Also
knownasa“rockcatcher”,thisproductservesasafilteringscreen&preventsany
debris from entering the fluid section that can cause damage & expensive repairs.
Inlet Screens
Product No. 661-012
661-012 7/8”-14 Titan,Wagner Graco,SprayTECH,ASM
450-100A 7/8”-14 Titan,Wagner,Graco SprayTECH,ASM
Mesh ProductNo.Coarse-30mesh 730-067-30Medium-60mesh 730-067Fine-100mesh 730-067-10
Mesh ProductNo.30mesh(Fine) 700-90010mesh(Coarse) 700-805
Units ProductNo.4900,6900,8900,12000GH 103-627AllGHD&DIUnits 710-046HydraProIV 103-627
Mesh ProductNo.30mesh(Fine) 710-19110mesh(Coarse) 710-046
ForuseonTitanE15,E20,G40&G55
Mesh ProductNo.Coarse-30mesh 761-042Medium-60mesh 761-043Fine-100mesh 761-041
ForuseonPowrTwin3500,
4500,&Hydra
MeshNo. ProductNo.Coarse-5mesh 920-001*Medium-50mesh 920-004Fine-100mesh 920-005
MeshNo. ProductNo.Mastic-0mesh 930-004Coarse-5mesh 930-005*Medium-50mesh 930-006Fine-100mesh 930-007
Filters Product No.*Coarse(Green) 500-200-03Medium(White) 500-200-06Fine(Yellow) 500-200-10ExtraFine(Red) 500-200-15
Filters Product No.Coarse(Green) 550-484Medium(White) 550-483Fine(Yellow) 550-485ExtraFine(Red) 550-486
ForuseonSpeefloPowrTwin5500,
4900,6900,8900,10000&12000
Threaded Unthreaded
ProductNo. 550-223
Reverse thread design prevents filter from unscrewing when handle is removed for
cleaning&replacement.Packagedtwoperpack.
Residential
ManifoldFilter
Nothing destroys a piston or a gun tip faster than debris in the coating. That’s why you need the best paint filters available.TITANgunfiltersandmanifoldfilters are designed for long life and maximum protection.
•Madefromstainlesssteelforstrengthand service
•Widevarietyofmeshsizesfrom 10 to 100
•Engineeredfordurabilityandlonglife
15.14.
TITAN™
REACH TOOLS
For use with Titan Gun Extensions & Extension Poles.
Permitsa260˚rotationforgreatersprayingversatility&accessibility.
7/8”G-Thread-Standard ProductNo.651-139
SwivelHead
Adaptanyextensionpoletoanystandardairlessgun.Becauseofit’sright-angledesign,
the angle adapter allows the pole to extend from the gun at the same angle as the handle.
Theresultisgreaterefficiency&comfort.Pressureratedat3600PSI(25MPa).
Refertotheretainingnutchartonthispagetoselectthepropernutsizeto
adapt to your airless gun.
ProductNo.310-072-1
Angle Adapter Assembly
Allows you to connect different length extruded poles together to create
differentlengthsforanyapplication.(Donotexceed12’)
ProductNo.310-062
Extension Pole Coupling
•Lightweightandeasytohandle.
•Canbeusedwithmostbrandsofairlesssprayguns.
•Pressureratedat3600PSI(25MPa).
GunExtensions-Aluminum
7/8”G-Thread-Standard6”(15cm) ProductNo.651-07012”(30cm) ProductNo.651-07118”(45cm) ProductNo.651-07224”(60cm) ProductNo.651-073
GunExtensions-StainlessSteel•Heavydutystainlesssteel.
•Canbeusedwithmostbrandsofairlesssprayguns.
•Pressureratedat7700PSI(53MPa).
7/8”G-Thread-Standard6”(15cm) ProductNo.611-28012”(15cm) ProductNo.611-28118”(15cm) ProductNo.611-28224”(15cm) ProductNo.611-283
11/16”F-Thread6”(15cm) ProductNo.651-12112”(30cm) ProductNo.651-12218”(45cm) ProductNo.651-12324”(60cm) ProductNo.651-124
These lightweight aluminum extensions are constructed with inner core ribs which
reinforce the pole & greatly increase their rigidity. The inner core rib construction allows
differentlengthpolestobeeasilycoupledtogetherupto12’,whilemaintainingthe
proper rigidity to suit most job conditions.
•Reachhighout-of-the-wayplaceswhensprayorpressurerolling.
•Adaptstomostairlessguns.
•Includes310-062extensionpolecoupling.
•Pressureratedat3600PSI(25MPa).
1.5’(.46m)Pole ProductNo.310-381-13’(.9m)Pole ProductNo.310-383-16’(1.8m)Pole ProductNo.310-386-1
3’ExtensionPolewithSwivelHead,7/8”Nut ProductNo.310-3906’ExtensionPolewithSwivelHead,7/8”Nut ProductNo.310-391
Extension Pole
Extended Reach
When your arms just aren’tlongenoughLadders and step stools have their limits. Wouldn’t it be nice to reach high places, to reach over foliage, to reach all the way to a high ceiling without ever leaving thefloorortheground?TITANoffersacollection of reach tools that allow you to apply every coating imaginable to out-of-reach areas. From gun extensions to extensionpolesandpoleguns,TITANisyour source for easier and more efficient coating application.
•Maximizethespeedandefficiencyofyour operation
•Minimizedanger–eliminatereachingfrom ladders
•Getthejobdonesafelyandquickly the first time
15.14.
TITAN™
REACH TOOLS
For use with Titan Gun Extensions & Extension Poles.
Permitsa260˚rotationforgreatersprayingversatility&accessibility.
7/8”G-Thread-Standard ProductNo.651-139
SwivelHead
Adaptanyextensionpoletoanystandardairlessgun.Becauseofit’sright-angledesign,
the angle adapter allows the pole to extend from the gun at the same angle as the handle.
Theresultisgreaterefficiency&comfort.Pressureratedat3600PSI(25MPa).
Refertotheretainingnutchartonthispagetoselectthepropernutsizeto
adapt to your airless gun.
ProductNo.310-072-1
Angle Adapter Assembly
Allows you to connect different length extruded poles together to create
differentlengthsforanyapplication.(Donotexceed12’)
ProductNo.310-062
Extension Pole Coupling
•Lightweightandeasytohandle.
•Canbeusedwithmostbrandsofairlesssprayguns.
•Pressureratedat3600PSI(25MPa).
GunExtensions-Aluminum
7/8”G-Thread-Standard6”(15cm) ProductNo.651-07012”(30cm) ProductNo.651-07118”(45cm) ProductNo.651-07224”(60cm) ProductNo.651-073
GunExtensions-StainlessSteel•Heavydutystainlesssteel.
•Canbeusedwithmostbrandsofairlesssprayguns.
•Pressureratedat7700PSI(53MPa).
7/8”G-Thread-Standard6”(15cm) ProductNo.611-28012”(15cm) ProductNo.611-28118”(15cm) ProductNo.611-28224”(15cm) ProductNo.611-283
11/16”F-Thread6”(15cm) ProductNo.651-12112”(30cm) ProductNo.651-12218”(45cm) ProductNo.651-12324”(60cm) ProductNo.651-124
These lightweight aluminum extensions are constructed with inner core ribs which
reinforce the pole & greatly increase their rigidity. The inner core rib construction allows
differentlengthpolestobeeasilycoupledtogetherupto12’,whilemaintainingthe
proper rigidity to suit most job conditions.
•Reachhighout-of-the-wayplaceswhensprayorpressurerolling.
•Adaptstomostairlessguns.
•Includes310-062extensionpolecoupling.
•Pressureratedat3600PSI(25MPa).
1.5’(.46m)Pole ProductNo.310-381-13’(.9m)Pole ProductNo.310-383-16’(1.8m)Pole ProductNo.310-386-1
3’ExtensionPolewithSwivelHead,7/8”Nut ProductNo.310-3906’ExtensionPolewithSwivelHead,7/8”Nut ProductNo.310-391
Extension Pole
Extended Reach
When your arms just aren’tlongenoughLadders and step stools have their limits. Wouldn’t it be nice to reach high places, to reach over foliage, to reach all the way to a high ceiling without ever leaving thefloorortheground?TITANoffersacollection of reach tools that allow you to apply every coating imaginable to out-of-reach areas. From gun extensions to extensionpolesandpoleguns,TITANisyour source for easier and more efficient coating application.
•Maximizethespeedandefficiencyofyour operation
•Minimizedanger–eliminatereachingfrom ladders
•Getthejobdonesafelyandquickly the first time
17.16.
i-remote&Receiver ProductNo.800-690 Remoteonly ProductNo.800-691Receiveronly ProductNo.800-692
i-remoteUniversalRemoteControl
•Thefirstintheindustry.
•Operatesover100feetawayfromunit—throughwalls,trees and other obstacles.
•Increaseordecreasethepressure—withoutclimbingdown off the ladder or scaffold.
•AbilitytoturnsprayerONandOFF;eliminatessprayer “runaway”whenyourunoutofpaintbystoppingsprayerquickly—extendingyourpistonandpackinglife.
•Universalremotecontroloperatesmostmanufactureselectronic pressure controlled sprayers.
•Worksoni,ix&Advantageseriessprayers
•Allmetalconstruction.
•“In-line”designisanaturalextensiontoanypole.
•In-handlefilter.
•Swivelreduceshosekinksandensureseffortlesscontrol.
•Pressurerateat3600psi(25MPa).
ProductNo. 550-475RepairKitNo. 550-487
LX-70In-LineGun
LX-75PoleGuns
•Allmetalconstruction.
•Fulllengthneedleensurespositiveshut-offattip.
•Pressureratedat3600PSI(25MPa).
•Reachthosehigh,out-of-the-wayplaces thatnormallyrequiretheuseofaladder or scaffolding.
•Gunswivel
•In-handlefilter.
•Ergonomicdesign
4’PoleGun 550-4958’PoleGun 550-500RepairKitNo. 550-487
•Convertexistinggunto6’(2m)pole gun&backinseconds.
•Allowsyoutoincreaseproduction&profits.
•Constructedoflightweight&rigid aluminum to reduce arm fatigue.
•Large,guninstallationholder&knob.
•Noadditionalhosesorfittingsrequired.
•AdaptstoallTitanairlesssprayguns&mostmanufacturersairless spray guns.
ProductNo. 757-920
6’Outrigger
17.16.
i-remote&Receiver ProductNo.800-690 Remoteonly ProductNo.800-691Receiveronly ProductNo.800-692
i-remoteUniversalRemoteControl
•Thefirstintheindustry.
•Operatesover100feetawayfromunit—throughwalls,trees and other obstacles.
•Increaseordecreasethepressure—withoutclimbingdown off the ladder or scaffold.
•AbilitytoturnsprayerONandOFF;eliminatessprayer “runaway”whenyourunoutofpaintbystoppingsprayerquickly—extendingyourpistonandpackinglife.
•Universalremotecontroloperatesmostmanufactureselectronic pressure controlled sprayers.
•Worksoni,ix&Advantageseriessprayers
•Allmetalconstruction.
•“In-line”designisanaturalextensiontoanypole.
•In-handlefilter.
•Swivelreduceshosekinksandensureseffortlesscontrol.
•Pressurerateat3600psi(25MPa).
ProductNo. 550-475RepairKitNo. 550-487
LX-70In-LineGun
LX-75PoleGuns
•Allmetalconstruction.
•Fulllengthneedleensurespositiveshut-offattip.
•Pressureratedat3600PSI(25MPa).
•Reachthosehigh,out-of-the-wayplaces thatnormallyrequiretheuseofaladder or scaffolding.
•Gunswivel
•In-handlefilter.
•Ergonomicdesign
4’PoleGun 550-4958’PoleGun 550-500RepairKitNo. 550-487
•Convertexistinggunto6’(2m)pole gun&backinseconds.
•Allowsyoutoincreaseproduction&profits.
•Constructedoflightweight&rigid aluminum to reduce arm fatigue.
•Large,guninstallationholder&knob.
•Noadditionalhosesorfittingsrequired.
•AdaptstoallTitanairlesssprayguns&mostmanufacturersairless spray guns.
ProductNo. 757-920
6’Outrigger
19.18.
TITAN™
ROLLERS Instead of dipping the roller into the paint, why
not feed the paint into the roller? You get the
best of both application worlds, increasing the
speedandefficiencyofyourwork–savingtime
andmakingalotmoremoney.It’smucheasierthanyouthink
andTITANhastheequipmentthatletsyougetthejob
done right.
•Upto40%fasterthanstandardrollerapplication
•Therollerneverleavesthesurface
•Easytouseandeasytocleanup
9”(22.7cm)RollerHead ProductNo.310-934InnerFeedRepairKit ProductNo.310-905
Inner Feed Pressure Roller
InnerFeedPressureKitIncludes:
•3’Pole.
•90ºAngleAdapter.
•InnerFeedRollerHeadAssembly.
•1/2”x9”HighQualityInnerFeedRollerCover.
•FitsOntoAnyAirlessGun.
9”PressureRollerKit ProductNo.310-150
SprayRollerKitIncludes:
•3’Pole.
•90ºAngleAdapter.
•SprayRollerHeadAssembly.
•1/2”x9”HighQualityInnerFeedRollerCover.
•FitsOntoAnyAirlessGun.
SprayRollerKit ProductNo.310-160
Onrough,poroussurfaceslikestuccoandconcreteblockmanycontractorsapplythe
coatingwithasprayerandthenback-rollitintothesurface.Itcanbemessy(lotsof
overspray)andtimeconsuming(youneedtwoworkerstodoit).Nowimaginewhat
itwouldbeliketosprayANDrollatthesametime.Yousavetimeandmakemoney.
That’swhatTITANisallabout.
•Idealforveryporousandroughsurfaces
•Sprayonthedown-strokeandrollontheupstroke
•Savesbothtimeandmoney
9”SprayRollerHeadAssembly ProductNo.310-049
Spray Roller
3-in-1Spray/RollApplicationKit
Spray Roller Replacement Covers
Size NapThickness ProductNo.9”(23cm) 1/2”(1.2cm) 311-050-99”(23cm) 3/4”(1.9cm) 311-075-99”(23cm) 1-1/4”(3.1cm) 311-125-9
RollerHeadReplacementCovers
Inner Feed Pressure Roller Replacement Covers
Size NapThickness ProductNo.9”(23cm) 3/8”(.81cm) 312-037-99”(23cm) 1/2”(1.2cm) 312-050-99”(23cm) 3/4”(1.9cm) 312-075-99”(23cm) 1-1/4”(3.1cm) 312-125-9
TheSpray/RollApplicationKitofferstheproperairlessspraypaintingtoolsfor
justabouteverypossiblepaintingcondition.It’sthefirstcompleteapplication
kitcreatedforprofessionals.Byselectingthepropercombinationoftools,the
professionalpaintercanchoosetoeitherspray,spray&back-rollorsimplyroll.
Includes:
• LX-70In-LineGun. •9”(23cm)SprayRollerHeadAssembly.
• 3’(9m)ExtrudedPole. •9”(23cm)PressureRollerHeadAssembly.
• SwivelHeadAssembly.
ApplicationKit ProductNo.310-110
TelescopingPressureRoller(LowPressure)
•Forhighproductionpaintapplicationswheresprayingisimpractical.
•Patentedaugerheaddesignevenlydistributescoatingforaprofessional finish every time.
•Comeswithlightweightaluminumadjustablepolewithaworkingpressureof1200PSI(8.3MPa).
•Theexclusivetelescopingrollerdesignhasalargecollarthatallowsyoutoquicklyadjustthelengthofthepolefrom3’-6’(.9m-1.8m).
•AlsoincludesTitan’sLX-70In-LineGunwhichfeaturesanallmetaldesign & a filter in the handle for a superior finish & extended life.
TelescopingPoleOnly ProductNo.310-938LX-70TelescopingRollerKitwith 9”(23cm)rollerhead1/2” (1.3cm)nap ProductNo.310-950
(Caution! Do not use for spray applications.)
Inner Feed Rolling
The speed of a sprayer and the control of a rollerinonepackageEvery painting contractor has worked witharoller.It’sanefficientandcontrolled way to apply paint. But it’s alsomuchslowerthanasprayer–upto40% of your labor time is spent charging the roller with paint. What if you could combinethetwo?TITANhastheanswer.
19.18.
TITAN™
ROLLERS Instead of dipping the roller into the paint, why
not feed the paint into the roller? You get the
best of both application worlds, increasing the
speedandefficiencyofyourwork–savingtime
andmakingalotmoremoney.It’smucheasierthanyouthink
andTITANhastheequipmentthatletsyougetthejob
done right.
•Upto40%fasterthanstandardrollerapplication
•Therollerneverleavesthesurface
•Easytouseandeasytocleanup
9”(22.7cm)RollerHead ProductNo.310-934InnerFeedRepairKit ProductNo.310-905
Inner Feed Pressure Roller
InnerFeedPressureKitIncludes:
•3’Pole.
•90ºAngleAdapter.
•InnerFeedRollerHeadAssembly.
•1/2”x9”HighQualityInnerFeedRollerCover.
•FitsOntoAnyAirlessGun.
9”PressureRollerKit ProductNo.310-150
SprayRollerKitIncludes:
•3’Pole.
•90ºAngleAdapter.
•SprayRollerHeadAssembly.
•1/2”x9”HighQualityInnerFeedRollerCover.
•FitsOntoAnyAirlessGun.
SprayRollerKit ProductNo.310-160
Onrough,poroussurfaceslikestuccoandconcreteblockmanycontractorsapplythe
coatingwithasprayerandthenback-rollitintothesurface.Itcanbemessy(lotsof
overspray)andtimeconsuming(youneedtwoworkerstodoit).Nowimaginewhat
itwouldbeliketosprayANDrollatthesametime.Yousavetimeandmakemoney.
That’swhatTITANisallabout.
•Idealforveryporousandroughsurfaces
•Sprayonthedown-strokeandrollontheupstroke
•Savesbothtimeandmoney
9”SprayRollerHeadAssembly ProductNo.310-049
Spray Roller
3-in-1Spray/RollApplicationKit
Spray Roller Replacement Covers
Size NapThickness ProductNo.9”(23cm) 1/2”(1.2cm) 311-050-99”(23cm) 3/4”(1.9cm) 311-075-99”(23cm) 1-1/4”(3.1cm) 311-125-9
RollerHeadReplacementCovers
Inner Feed Pressure Roller Replacement Covers
Size NapThickness ProductNo.9”(23cm) 3/8”(.81cm) 312-037-99”(23cm) 1/2”(1.2cm) 312-050-99”(23cm) 3/4”(1.9cm) 312-075-99”(23cm) 1-1/4”(3.1cm) 312-125-9
TheSpray/RollApplicationKitofferstheproperairlessspraypaintingtoolsfor
justabouteverypossiblepaintingcondition.It’sthefirstcompleteapplication
kitcreatedforprofessionals.Byselectingthepropercombinationoftools,the
professionalpaintercanchoosetoeitherspray,spray&back-rollorsimplyroll.
Includes:
• LX-70In-LineGun. •9”(23cm)SprayRollerHeadAssembly.
• 3’(9m)ExtrudedPole. •9”(23cm)PressureRollerHeadAssembly.
• SwivelHeadAssembly.
ApplicationKit ProductNo.310-110
TelescopingPressureRoller(LowPressure)
•Forhighproductionpaintapplicationswheresprayingisimpractical.
•Patentedaugerheaddesignevenlydistributescoatingforaprofessional finish every time.
•Comeswithlightweightaluminumadjustablepolewithaworkingpressureof1200PSI(8.3MPa).
•Theexclusivetelescopingrollerdesignhasalargecollarthatallowsyoutoquicklyadjustthelengthofthepolefrom3’-6’(.9m-1.8m).
•AlsoincludesTitan’sLX-70In-LineGunwhichfeaturesanallmetaldesign & a filter in the handle for a superior finish & extended life.
TelescopingPoleOnly ProductNo.310-938LX-70TelescopingRollerKitwith 9”(23cm)rollerhead1/2” (1.3cm)nap ProductNo.310-950
(Caution! Do not use for spray applications.)
Inner Feed Rolling
The speed of a sprayer and the control of a rollerinonepackageEvery painting contractor has worked witharoller.It’sanefficientandcontrolled way to apply paint. But it’s alsomuchslowerthanasprayer–upto40% of your labor time is spent charging the roller with paint. What if you could combinethetwo?TITANhastheanswer.
21.20.
TITAN™
HOSES •Urethanecoverisbondedtoaninnernylonbraidmakingithighlyflexible&kinkresistant.
•Conductivetubedesignforpropergrounding.
•Durableabrasion-resistanturethanecover resists wear.
HighQualityAirlessHose
PartNo. I.D. Feet Meters PSI MPa EndConnection0291007 3/16” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel0291008 3/16” 50 15.2 3300 22.8 1/4”NPSM(FBE)Swivel316-513 1/4” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel316-505 1/4” 50 15.2 3300 22.8 1/4”NPSM(FBE)Swivel250-114* 1/4” 50 15.2 4500 31 1/4”NPSM(FBE)Swivel250-614* 1/4” 25 15.2 7400 51 1/4”NPSM(FBE)Swivel0508342 3/8” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel690-375-50 3/8” 50 15.2 3300 22.8 3/8”NPSM(FBE)Swivel250-538* 3/8” 50 15.2 5400 37 3/8”NPSM(FBE)Swivel225-112* 1/2” 25 7.6 3000 20.7 1/2”NPSM(FBE)Swivel250-112* 1/2” 50 15.2 3000 20.7 1/2”NPSM(FBE)Swivel250-512* 1/2” 50 15.2 5100 35.2 1/2”NPSM(FBE)Swivel250-638* 3/8” 50 15.2 7400 51 3/8”NPSM(FBE)Swivel
MaximumWorkingPressure
MaximumWorkingPressure
* TextileBraid-Springguardsatbothends FBE-FemaleBothEnds NPT-NationalPipeTaperedThread MBE-MaleBothEnds NPSM-NationalPipeStraightMechanicalThread F/M-1Female/1MaleConnection
AirlessFluidHoseWhips
PartNo. I.D. Feet Meters PSI MPa EndConnection550-240 3/16” 3 0.9 3300 22.8 1/4”NPSM(F/M)Swivel316-506 3/16” 5 1.5 3300 22.8 1/4”NPSM(F/M)Swivel550-222 3/16” 9 2.7 3300 22.8 1/4”NPSM(F/M)Swivel550-221 3/16” 15 4.5 3300 22.8 1/4”NPSM(F/M)Swivel203-514* 1/4” 3 0.9 4500 31 1/4”NPSM(FBE)Swivel550-227 1/4” 6 1.8 3300 22.8 1/4”NPSM(F/M)Swivel316-533* 1/4” 6 1.8 3300 22.8 1/4”NPSM(FBE)Swivel
Length
Length•Pressureratedat5000PSI(34.5MPa).
•Reducethechanceofhosekinks,extendhoselife.
•Reduceeffortwhencoiling&uncoilinghose.
•Lessarmfatiguewhenattachedtogun.
•Patentedballbearingdesign.
Gun-To-Hose/Hose-To-Pump 1/4”(.63cm)NPS(F)x1/4”(.63cm)NPS(M) ProductNo.500-428Hose-To-Hose 1/4”(.63cm)NPS(M)x1/4”(.63cm)NPS(M) ProductNo.500-424
HighPressureSwivels
Reel-EZ16”Cart-Mount ProductNo.769-100Reel-EZ10”Skid-Mount ProductNo.769-200
ReelEZHoseReels
HoseCover
•TheReel-EZvirtuallyeliminateshosehassles&increasesyourproduction.TheReel-EZ16mountstotheframeofallTitan&Speeflo cart style paint sprayers with a heavy duty universal mountingbracket.TheReel-EZ10mountstotheframeofallTitanskidstylepaintsprayerssuchasthe440i.Boththe Reel-EZ16&Reel-EZ10mounttomostmajormanufacturer’spaint sprayers with similar designs.
•TheReel-EZ16canholdupto100’(30.5m)of1/4”airlesshose&theReel-EZ10canholdupto50’(15.2m)of1/4”airlesshose.Bothareratedat3600psi(25MPa).
Protect your airless hose from paint and abbrasion damage with adurable4milpolyhosecover.Comesin1000feetlengthswithpeferationevery50feettofitanylengthofhose.
Hosecover ProductNo.052-1424
HighPressureFluidGaugeKitIncludes:5000PSI(34.5MPa)highpressurefluidgaugeattachedtoaT-Fittingwithone1/4”(M)(.63cm)fitting&one1/4”(F)(.63cm)fitting. FluidGageKit ProductNo.730-397Fluid Gauge Only Product No. 730-394
9’ Whip Hose5’ Whip Hose
ExtendedLength
Therightequipmentforthe right jobJust a commodity? Think again. A hose that fails or bursts can cost you time, paint and worse. There is a lot of pressure in that hose and you need reliability.YouneedTITAN–theindustryleader in top-shelf paint hoses and flexible whips.
•Solidurethaneconstructiondesignedto withstand time and pressure
•Easytocoilanduncoil•Widevarietyofdiametersandlengths
21.20.
TITAN™
HOSES •Urethanecoverisbondedtoaninnernylonbraidmakingithighlyflexible&kinkresistant.
•Conductivetubedesignforpropergrounding.
•Durableabrasion-resistanturethanecover resists wear.
HighQualityAirlessHose
PartNo. I.D. Feet Meters PSI MPa EndConnection0291007 3/16” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel0291008 3/16” 50 15.2 3300 22.8 1/4”NPSM(FBE)Swivel316-513 1/4” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel316-505 1/4” 50 15.2 3300 22.8 1/4”NPSM(FBE)Swivel250-114* 1/4” 50 15.2 4500 31 1/4”NPSM(FBE)Swivel250-614* 1/4” 25 15.2 7400 51 1/4”NPSM(FBE)Swivel0508342 3/8” 25 7.6 3300 22.8 1/4”NPSM(FBE)Swivel690-375-50 3/8” 50 15.2 3300 22.8 3/8”NPSM(FBE)Swivel250-538* 3/8” 50 15.2 5400 37 3/8”NPSM(FBE)Swivel225-112* 1/2” 25 7.6 3000 20.7 1/2”NPSM(FBE)Swivel250-112* 1/2” 50 15.2 3000 20.7 1/2”NPSM(FBE)Swivel250-512* 1/2” 50 15.2 5100 35.2 1/2”NPSM(FBE)Swivel250-638* 3/8” 50 15.2 7400 51 3/8”NPSM(FBE)Swivel
MaximumWorkingPressure
MaximumWorkingPressure
* TextileBraid-Springguardsatbothends FBE-FemaleBothEnds NPT-NationalPipeTaperedThread MBE-MaleBothEnds NPSM-NationalPipeStraightMechanicalThread F/M-1Female/1MaleConnection
AirlessFluidHoseWhips
PartNo. I.D. Feet Meters PSI MPa EndConnection550-240 3/16” 3 0.9 3300 22.8 1/4”NPSM(F/M)Swivel316-506 3/16” 5 1.5 3300 22.8 1/4”NPSM(F/M)Swivel550-222 3/16” 9 2.7 3300 22.8 1/4”NPSM(F/M)Swivel550-221 3/16” 15 4.5 3300 22.8 1/4”NPSM(F/M)Swivel203-514* 1/4” 3 0.9 4500 31 1/4”NPSM(FBE)Swivel550-227 1/4” 6 1.8 3300 22.8 1/4”NPSM(F/M)Swivel316-533* 1/4” 6 1.8 3300 22.8 1/4”NPSM(FBE)Swivel
Length
Length•Pressureratedat5000PSI(34.5MPa).
•Reducethechanceofhosekinks,extendhoselife.
•Reduceeffortwhencoiling&uncoilinghose.
•Lessarmfatiguewhenattachedtogun.
•Patentedballbearingdesign.
Gun-To-Hose/Hose-To-Pump 1/4”(.63cm)NPS(F)x1/4”(.63cm)NPS(M) ProductNo.500-428Hose-To-Hose 1/4”(.63cm)NPS(M)x1/4”(.63cm)NPS(M) ProductNo.500-424
HighPressureSwivels
Reel-EZ16”Cart-Mount ProductNo.769-100Reel-EZ10”Skid-Mount ProductNo.769-200
ReelEZHoseReels
HoseCover
•TheReel-EZvirtuallyeliminateshosehassles&increasesyourproduction.TheReel-EZ16mountstotheframeofallTitan&Speeflo cart style paint sprayers with a heavy duty universal mountingbracket.TheReel-EZ10mountstotheframeofallTitanskidstylepaintsprayerssuchasthe440i.Boththe Reel-EZ16&Reel-EZ10mounttomostmajormanufacturer’spaint sprayers with similar designs.
•TheReel-EZ16canholdupto100’(30.5m)of1/4”airlesshose&theReel-EZ10canholdupto50’(15.2m)of1/4”airlesshose.Bothareratedat3600psi(25MPa).
Protect your airless hose from paint and abbrasion damage with adurable4milpolyhosecover.Comesin1000feetlengthswithpeferationevery50feettofitanylengthofhose.
Hosecover ProductNo.052-1424
HighPressureFluidGaugeKitIncludes:5000PSI(34.5MPa)highpressurefluidgaugeattachedtoaT-Fittingwithone1/4”(M)(.63cm)fitting&one1/4”(F)(.63cm)fitting. FluidGageKit ProductNo.730-397Fluid Gauge Only Product No. 730-394
9’ Whip Hose5’ Whip Hose
ExtendedLength
Therightequipmentforthe right jobJust a commodity? Think again. A hose that fails or bursts can cost you time, paint and worse. There is a lot of pressure in that hose and you need reliability.YouneedTITAN–theindustryleader in top-shelf paint hoses and flexible whips.
•Solidurethaneconstructiondesignedto withstand time and pressure
•Easytocoilanduncoil•Widevarietyofdiametersandlengths
23.22.
TITAN™
LIQUIDS
PumpShield
PaintMate
Size ProductNo.7ozs./200ml 314-207Refill1quart/.95Liters 314-208
Tip Clean•Hour-glassdesignallowseasycleaning
of all airless tips and safe storage.
•Cleaningfluidremovescontaminationand paint residue, ensuring best spraying results.
Water-basedcoatingadditivethatsignificantlyimprovesatomizationwithHVLPsprayerswithout compromising the integrity of the coating.
Size ProductNo.1Qt.bottle 05080716pack1Qt.bottle 0508069
•Speciallyformulatedtopreventmaterials from adhering to the piston rod.
•Suitableforusewithmostairlesspistonpumps.
Size ProductNo.8oz.bottle 314-4804oz.bottle 314-4811Qt.bottle 700-926
PistonLube
•Cleans&protectsyourspraysystemagainst rust & corrosion.
•Extendsthelifeofyourpump.
•Nowwithanti-freezeprotection.
Size ProductNo.1Qt.bottle 314-4824oz.bottle 314-483
Cover your sprayer to prevent paint overspray from stickingtoit.Keepsyoursprayerlookingnew
Size ProductNo.12Oz.bottle 0297055
LS-10LiquidShieldPlus
•HydraulicFluidforPowrTwin&Hydrasprayers.
Size ProductNo.1Qt.bottle 430-3621Gallon 430-3611Qt.bottle(caseof12) 430-363
Coolflo™
•Speciallydesignedforgearboxes.
14oz.Can ProductNo.314-171
Grease
•Speciallyformulatedtopreventcorrosioninairmotors.
•Suitableforusewithmostairdrivensprayers.
Size ProductNo.1Qt.bottle 311-1011Qt.bottle(caseof12) 311-103
Air Care
Clean up
Start up
Nomatterwhatthesprayer–hydraulic,geardriven,gas-poweredorelectric–ifyou want a long service life you will need to care for it with the same attention you care for your own car or truck. That means changing the oil, lubricating the piston, cleaning the unit, the gun and the tip.TITANhasalltheproductsyouneedto keep your accessories and equipment clean and functioning in top condition.
•Speciallyformulatedforallsprayers,accessories and equipment
•Maintaincleanandefficientoperationfor better profit
•Prolongthelifeofyourinvestment
23.22.
TITAN™
LIQUIDS
PumpShield
PaintMate
Size ProductNo.7ozs./200ml 314-207Refill1quart/.95Liters 314-208
Tip Clean•Hour-glassdesignallowseasycleaning
of all airless tips and safe storage.
•Cleaningfluidremovescontaminationand paint residue, ensuring best spraying results.
Water-basedcoatingadditivethatsignificantlyimprovesatomizationwithHVLPsprayerswithout compromising the integrity of the coating.
Size ProductNo.1Qt.bottle 05080716pack1Qt.bottle 0508069
•Speciallyformulatedtopreventmaterials from adhering to the piston rod.
•Suitableforusewithmostairlesspistonpumps.
Size ProductNo.8oz.bottle 314-4804oz.bottle 314-4811Qt.bottle 700-926
PistonLube
•Cleans&protectsyourspraysystemagainst rust & corrosion.
•Extendsthelifeofyourpump.
•Nowwithanti-freezeprotection.
Size ProductNo.1Qt.bottle 314-4824oz.bottle 314-483
Cover your sprayer to prevent paint overspray from stickingtoit.Keepsyoursprayerlookingnew
Size ProductNo.12Oz.bottle 0297055
LS-10LiquidShieldPlus
•HydraulicFluidforPowrTwin&Hydrasprayers.
Size ProductNo.1Qt.bottle 430-3621Gallon 430-3611Qt.bottle(caseof12) 430-363
Coolflo™
•Speciallydesignedforgearboxes.
14oz.Can ProductNo.314-171
Grease
•Speciallyformulatedtopreventcorrosioninairmotors.
•Suitableforusewithmostairdrivensprayers.
Size ProductNo.1Qt.bottle 311-1011Qt.bottle(caseof12) 311-103
Air Care
Clean up
Start up
Nomatterwhatthesprayer–hydraulic,geardriven,gas-poweredorelectric–ifyou want a long service life you will need to care for it with the same attention you care for your own car or truck. That means changing the oil, lubricating the piston, cleaning the unit, the gun and the tip.TITANhasalltheproductsyouneedto keep your accessories and equipment clean and functioning in top condition.
•Speciallyformulatedforallsprayers,accessories and equipment
•Maintaincleanandefficientoperationfor better profit
•Prolongthelifeofyourinvestment
25.24.
TITAN™
MANIFOLDS
Description ProductNo.1/4”NPS(F)X1/4”NPT(M) 490-0053/8”NPS(F)X1/4”NPT(M) 490-0421/4”NPS(F)X3/8”NPT(M) 490-0323/8”NPS(F)X3/8”NPT(M) 490-0431/2”NPS(F)X1/2”NPT(M) 200-5553/4”NPS(F)X3/4”NPT(M) 138-0373/4”NPS(F)X1/2”NPT(M) 200-5571”NPS(F)X1”NPT(M) 200-556
SwivelUnion
90°StreetElbows
Pipe Tees
Description ProductNo..1/4”NPT(F) 970-0233/8”NPT(F) 817-0021/2”NPT(F) 817-0033/4”NPT(F) 817-004
Reducer Bushings
Description ProductNo.3/8”NPT(M)X1/8”NPT(F) 929-0603/8”NPT(M)X1/4”NPT(F) 817-0011/2”NPT(M)X1/4”NPT(F) 929-0611/2”NPT(M)X3/8”NPT(F) 541-0093/4”NPT(M)X1/4”NPT(F) 929-0621”NPT(M)X3/4”NPT(F) 929-0761-1/4”NPT(M)X3/4”NPT(F) 929-0781-1/4”NPT(M)X1”NPT(F) 929-077
Pipe PlugsDescription ProductNo.1/8”NPT(M) 227-0301/4”NPT(M) 227-0273/8”NPT(M) 227-0331/2”NPT(M) 210-0233/4”NPT(M) 210-038
ManifoldToHoseCouplings
Description ProductNo.1/4”NPS(M)X1/4”NPS(M) 490-0121/4”NPS(M)X3/8”NPS(M) 490-0163/8”NPS(M)X3/8”NPS(M) 490-0141/2”NPS(M)X1/2”NPS(M) 816-003
HoseToHoseCouplings
Description ProductNo.1/8”NPT(M)X1/4”NPS(M) 490-0011/8”NPT(M)X3/8”NPS(M) 654-0161/4”NPT(M)X1/4”NPS(M) 227-0061/4”NPT(M)X3/8”NPS(M) 804-5551/4”NPT(M)X1/2”NPS(M) 814-0033/8”NPT(M)X1/4”NPS(M) 812-0033/8”NPT(M)X3/8”NPS(M) 808-5553/8”NPT(M)X1/2”NPS(M) 815-0051/2”NPT(M)X1/2”NPS(M) 228-0021/2”NPT(M)X3/4”NPS(M) 804-2013/4”NPT(M)X1/2”NPS(M) 814-555
ManifoldToManifoldCouplingsDescription ProductNo.1/8”NPT(M)X1/4”NPT(M) 931-0291/4”NPT(M)X1/4”NPT(M) 490-0021/4”NPT(M)X3/8”NPT(M) 490-0063/8”NPT(M)X3/8”NPT(M) 814-0043/8”NPT(M)X1/2”NPT(M) 814-0051/2”NPT(M)X1/2”NPT(M) 814-0061/2”NPT(M)X3/4”NPT(M) 101-2013/4”NPT(M)X3/4”NPT(M) 814-007
Description ProductNo.3/8”NPT(F)X3/8”NPT(M) 818-0021/2”NPT(F)X1/2”NPT(M) 818-0033/4”NPT(F)X1/2”NPT(M) 818-0113/4”NPT(F)X3/4”NPT(M) 818-0101-1/4”NPT(F)X1-1/4”NPT(F) 818-008
Commercial
Spraying is more than just hooking up a hose. Sometimes the situation calls for extending hose length or altering the angle of the hose connected to the sprayer.That’swhenyouneedTITANmanifolds and fittings.
•Wehaveafittingforeveryjob•Manufacturedfromquality
stainless steel•Engineeredfordurabilityandlonglife
25.24.
TITAN™
MANIFOLDS
Description ProductNo.1/4”NPS(F)X1/4”NPT(M) 490-0053/8”NPS(F)X1/4”NPT(M) 490-0421/4”NPS(F)X3/8”NPT(M) 490-0323/8”NPS(F)X3/8”NPT(M) 490-0431/2”NPS(F)X1/2”NPT(M) 200-5553/4”NPS(F)X3/4”NPT(M) 138-0373/4”NPS(F)X1/2”NPT(M) 200-5571”NPS(F)X1”NPT(M) 200-556
SwivelUnion
90°StreetElbows
Pipe Tees
Description ProductNo..1/4”NPT(F) 970-0233/8”NPT(F) 817-0021/2”NPT(F) 817-0033/4”NPT(F) 817-004
Reducer Bushings
Description ProductNo.3/8”NPT(M)X1/8”NPT(F) 929-0603/8”NPT(M)X1/4”NPT(F) 817-0011/2”NPT(M)X1/4”NPT(F) 929-0611/2”NPT(M)X3/8”NPT(F) 541-0093/4”NPT(M)X1/4”NPT(F) 929-0621”NPT(M)X3/4”NPT(F) 929-0761-1/4”NPT(M)X3/4”NPT(F) 929-0781-1/4”NPT(M)X1”NPT(F) 929-077
Pipe PlugsDescription ProductNo.1/8”NPT(M) 227-0301/4”NPT(M) 227-0273/8”NPT(M) 227-0331/2”NPT(M) 210-0233/4”NPT(M) 210-038
ManifoldToHoseCouplings
Description ProductNo.1/4”NPS(M)X1/4”NPS(M) 490-0121/4”NPS(M)X3/8”NPS(M) 490-0163/8”NPS(M)X3/8”NPS(M) 490-0141/2”NPS(M)X1/2”NPS(M) 816-003
HoseToHoseCouplings
Description ProductNo.1/8”NPT(M)X1/4”NPS(M) 490-0011/8”NPT(M)X3/8”NPS(M) 654-0161/4”NPT(M)X1/4”NPS(M) 227-0061/4”NPT(M)X3/8”NPS(M) 804-5551/4”NPT(M)X1/2”NPS(M) 814-0033/8”NPT(M)X1/4”NPS(M) 812-0033/8”NPT(M)X3/8”NPS(M) 808-5553/8”NPT(M)X1/2”NPS(M) 815-0051/2”NPT(M)X1/2”NPS(M) 228-0021/2”NPT(M)X3/4”NPS(M) 804-2013/4”NPT(M)X1/2”NPS(M) 814-555
ManifoldToManifoldCouplingsDescription ProductNo.1/8”NPT(M)X1/4”NPT(M) 931-0291/4”NPT(M)X1/4”NPT(M) 490-0021/4”NPT(M)X3/8”NPT(M) 490-0063/8”NPT(M)X3/8”NPT(M) 814-0043/8”NPT(M)X1/2”NPT(M) 814-0051/2”NPT(M)X1/2”NPT(M) 814-0061/2”NPT(M)X3/4”NPT(M) 101-2013/4”NPT(M)X3/4”NPT(M) 814-007
Description ProductNo.3/8”NPT(F)X3/8”NPT(M) 818-0021/2”NPT(F)X1/2”NPT(M) 818-0033/4”NPT(F)X1/2”NPT(M) 818-0113/4”NPT(F)X3/4”NPT(M) 818-0101-1/4”NPT(F)X1-1/4”NPT(F) 818-008
Commercial
Spraying is more than just hooking up a hose. Sometimes the situation calls for extending hose length or altering the angle of the hose connected to the sprayer.That’swhenyouneedTITANmanifolds and fittings.
•Wehaveafittingforeveryjob•Manufacturedfromquality
stainless steel•Engineeredfordurabilityandlonglife
26.
TITAN™
MISCTITAN™
MODULARMANIFOLDS
GunManifoldAssemblies
3/8”MultipleGunManifoldAssemblies*
1/4”MultipleGunManifoldAssemblies*
*HoseConnectionis1/4”NPSM(M)
*HoseConnectionis3/8”NPSM(M)
GunManifoldAssemblies
Max.Capacitytank: 1.5gallonsPower: 1500wattsHose/Cord: 16ftelectricalcord/16fthoseSteamTime: 3hoursP/N: 0282009
TITAN™DTSteamer
TITAN™PaintEater®
A powerful, commercial steamer
with minimal service and
maximum ROI.
TheDTSteamerturnsa
quickinvestmentintoa
fastreturn.WiththeDual
Tanktechnology,youare
abletobeworkinginunder
5minutes.Withthelargeand
small steam plates included,
you can cover large areas or
small areas between trim
and doors.
Aggressive on paint,
gentle on siding and trim.
The PaintEater efficiently removes
peeling paint from siding and trim
aswellasconcreteblock,steel
and other masonry. It delivers
professionalresultswithamazing
speed and ease.
PartNo. 0513055
3-GUNMANIFOLDASSEMBLY
6-GUNMANIFOLDASSEMBLY
1-GUNADD-ONKIT
ADD-A-GUNKIT 27.
GunAddOnKits
Part Number PartNumber 975-212 975-213 975-214 2-Gun1/4” 3-Gun1/4” 4-Gun1/4”975-111 1-GunAddon1/4” 1 1 1975-200 Add-A-GunKit1/4” 1 1 3
Part Number PartNumber 975-312 975-313 975-314 2-Gun3/8” 3-Gun3/8” 4-Gun3/8”975-311 1-GunAddon3/8” 1 1 1975-300 Add-A-GunKit3/8” 1 1 3
975-111 975-311 975-200 975-300 Item Part 1-GunAdd-On 1-GunAdd-On Add-A-Gun Add-A-Gun No. No. Desc. 1/4” 3/8” 1/4” 3/8”1 814-002 Nipple,Hex 1 11a 814-004 Nipple,Hex 1 12 940-553 Valve,Ball 1 12a 941-555 Valve,Ball 1 13 227-006 Nipple,Hex 1 13a 808-555 Nipple,Hex 1 14 227-033 Plug,Pipe 1 15 970-100 Block,Manifold 1 16 814-004 Nipple,Hex 1 1
Paint Removal
Steamer
26.
TITAN™
MISCTITAN™
MODULARMANIFOLDS
GunManifoldAssemblies
3/8”MultipleGunManifoldAssemblies*
1/4”MultipleGunManifoldAssemblies*
*HoseConnectionis1/4”NPSM(M)
*HoseConnectionis3/8”NPSM(M)
GunManifoldAssemblies
Max.Capacitytank: 1.5gallonsPower: 1500wattsHose/Cord: 16ftelectricalcord/16fthoseSteamTime: 3hoursP/N: 0282009
TITAN™DTSteamer
TITAN™PaintEater®
A powerful, commercial steamer
with minimal service and
maximum ROI.
TheDTSteamerturnsa
quickinvestmentintoa
fastreturn.WiththeDual
Tanktechnology,youare
abletobeworkinginunder
5minutes.Withthelargeand
small steam plates included,
you can cover large areas or
small areas between trim
and doors.
Aggressive on paint,
gentle on siding and trim.
The PaintEater efficiently removes
peeling paint from siding and trim
aswellasconcreteblock,steel
and other masonry. It delivers
professionalresultswithamazing
speed and ease.
PartNo. 0513055
3-GUNMANIFOLDASSEMBLY
6-GUNMANIFOLDASSEMBLY
1-GUNADD-ONKIT
ADD-A-GUNKIT 27.
GunAddOnKits
Part Number PartNumber 975-212 975-213 975-214 2-Gun1/4” 3-Gun1/4” 4-Gun1/4”975-111 1-GunAddon1/4” 1 1 1975-200 Add-A-GunKit1/4” 1 1 3
Part Number PartNumber 975-312 975-313 975-314 2-Gun3/8” 3-Gun3/8” 4-Gun3/8”975-311 1-GunAddon3/8” 1 1 1975-300 Add-A-GunKit3/8” 1 1 3
975-111 975-311 975-200 975-300 Item Part 1-GunAdd-On 1-GunAdd-On Add-A-Gun Add-A-Gun No. No. Desc. 1/4” 3/8” 1/4” 3/8”1 814-002 Nipple,Hex 1 11a 814-004 Nipple,Hex 1 12 940-553 Valve,Ball 1 12a 941-555 Valve,Ball 1 13 227-006 Nipple,Hex 1 13a 808-555 Nipple,Hex 1 14 227-033 Plug,Pipe 1 15 970-100 Block,Manifold 1 16 814-004 Nipple,Hex 1 1
Paint Removal
Steamer
Titan is your complete accessory source for Gas and Electric Sprayers
Sold exclusively through professional distributorsTitan Tool, Inc.1770 Fernbrook LaneMinneapolis, MN 554471-800-526-5362Fax 1-800-528-4826
International SalesTitan Tool, Inc.1770 Fernbrook LaneMinneapolis, MN 554471-201-337-1240Fax 1-201-405-7449
Visit us on the web at: www.titantool.comCall Tech Services at 1-800-526-5362 for complete warranty information.
All information contained in this brochure is based on the latest information available at time of printing. Titan reserves the right to make changes at any time, without notice.
Due to product branding conversions, units may be changing over time. Please call your local distributor, sales rep, or Titan customer service line for specific details
Titan Tool of Canada200 Trowers Road, Unit 7BWoodbridge, Ontario L4L-5Z81-800-565-8665Fax 1-905-856-8496
Airless Accessories
SL40125 JB51021A
Airless Accessories