Post on 28-Jun-2020
Oasis™ C1 | Power Plant
Maximized Production High-efficiency technology delivers more
MWh per hectare than a system based
around Conventional Panels1 mounted
on a fixed tilt system.
Higher Capacity Factor Industry-leading tracking technology
delivers capacity factors up to 25%
higher than conventional systems.
Faster Commissioning Pre-manufactured tracker and electrical
systems ensure the plant is quickly
permitted, constructed, and connected
to the grid.
Lower O&M Costs Superior technology and integrated
design reduces operations and
maintenance costs.
A Proven Performance Reliable technology with an unparalleled
track record minimises risk and ensures
project bankability.
SunPower™ Oasis™ C1 Power Plant A Ground Mount Solution For A Lower LCOE
The SunPower™ Oasis™ C1 Power Plant combines the best solar panels
and tracking technologies with a simplified, modular approach to deliver
reliable utility-scale solar energy. Engineered as a complete turnkey
system, the Oasis C1 Power Plant maximizes energy production and
requires less land to create the same energy output as conventional
solar power plants.
With more than 10 years of experience in the engineering, construction
and operations of utility-scale power plants, SunPower has transformed
power plant development from a piecemeal process into a streamlined,
efficient installation with the Oasis. Each Oasis C1 1.5 MW power block
features SunPower high-efficiency solar panels2 mounted on proprietary
single-axis trackers, DC collection, and a pre-configured AC inverter
station that includes a medium voltage transformer. The C1 power
blocks can fit numerous site topographies and are easily scaled from
10 MW to over 500 MW.
Providing reliable, long-term production, the Oasis C1 ensures that
customers enjoy a lower total cost of energy and a strong return on
their investment.
1.“Conventional Panel” is a 240W panel, 15% efficient, approx. 1.6 m2, made with Conventional Cells. ”Conventional Cells” are silicon cells that have many thin metal lines on the front and 2 or 3 interconnect ribbons soldered along the front and back.2. High-efficiency panels: Large-area silicon record, Green, M. A., et. al. “Solar Cell Efficiency Tables,”Progress in Photovoltaics, 2013, vol. 21, p1-11.
Data Sheet
Oasis™ C1 | Power Plant
Typical Power Block ConfigurationInverter Station Rating 1.50 MWacTotal DC Panel Capacity 1.88 MWdcDC/AC Ratio 1.25Panels per Power Block 4,320Strings per Power Block 432Combiner Boxes per Power Block 18
Trackers per Power Block 6
Inverter StationTotal Power Rating 1.50 MWac at inverter terminals, for p.f.=1Power Factor Range 0.9 leading to 0.9 laggingMaximum DC Voltage 1000 VMaximum Inverter THD <3%Weighted Inverter Efficiency ≥97.5%Inverter Enclosure IP54
Utility Interconnection
Voltage & frequency ride-through per IEEE, FERC and WECC standards. Power factor control, power curtailment and other grid support functions available with SunPower™ Grid Controller
Transformer Voltage 4 kV to 35 kV, configured per interconnection requirement
Transformer Efficiency 99%, operating load weightedCertifications UL
C1 Tracker System
Tracking Type Horizontal single-axis, astronomical algorithm with backtracking
Tracking Range +45 to –45 degrees
Drive System One electric linear actuator per tracker, with TMAC™ tracker controller
Ground Coverage Ratio (GCR) 0.35 to 0.45Foundations Galvanised steel driven pilesStructural Components Galvanised steelTracker Bearings Maintenance free polymer journal bearingsCertifications UL
DC Electrical SystemPV Panels E20™ 435 W commer cial panel
DC Combiner BoxesStandard 24-string combiner box with load-break disconnect and pre-manufactured array wiring harness
DC Feeder Conductor Aluminum, direct burialMaximum DC System Voltage 1000 VCertifications UL
© 2014 SunPower Corporation. All rights reserved. SUNPOWER, the SUNPOWER logo, OASIS, and TMAC are trademarks or registered trademarks of SunPower Corporation in the U.S. and other countries as well. Specifications included in this datasheet are subject to change without notice.
Site ConditionsMaximum Wind Speed 100 mph, 3 sec gustMaximum Snow Load 20 psfGround Slope Tolerance Up to 6 degrees in any directionFlood Clearance for 12” sheet flow standardMaximum Corrosion ISO category 3 environ mentsOperating Ambient Temperature -4°F to 122°F (-20°C to 50°C)Elevation Up to 3,280’ (1000m) without de-ratingHumidity 15% to 95%, non-con densing
Data Sheet