Post on 31-Mar-2015
Reverse Engineering: FUNCTIONAL ANALYSIS
Functional Analysis
After a product has been selected, a non-destructive Functional Analysis is performed. The product’s purpose is identified. Observations are made to determine how the
product functions. These observations are recorded in detail.
The system’s inputs and outputs are identified.
A theory of operations is developed and recorded.
Deliverable
Prepare a concise “theory of operations” that describes how you think your product functions . You will contrast this to what you discover after you disassemble your product.
A theory of operation is a description of how the product works and how it is used.
NOTE: you can prepare this in Word as part of your technical report. That report is due at the end of the project but this is due sooner!
Source: Airmar technology. (2012, March 28). Retrieved from http://www.airmartechnology.com/uploads/installguide/Theory_of_ Operations.pdf
An example: Theory of Operation for a fish finder.
What does it do (purpose)
?
How is it used?
What is the
product?
What are the major parts?
Simple Machines?
How does it work (your theory)?
“Black Box” Systems Model A black box systems model is used to identify what goes
into and out of the product in order to make it work as a system.
The black box is a model used to represent the product’s internal components or processes, which may be unknown at this point.
The Black Box Systems Model
It is a non-destructive method of analysis used to identify the sequential operations of a product or system and identify the inputs and outputs of those systems.
Black Box
Product Function
OutputInputs
Functional Analysis Example
Describe the expected purpose of the product.
The purpose of a toothbrush is to clean teeth and gums to prevent tooth and gum decay.
Water and a cleaning paste are also used in with the brush.
Functional Analysis Example
Black Box
Product Function
OutputInputs
• Hand motion
• Energy• Toothpaste• Water
• Sound• Heat• Waste• Clean teeth
and gums
• Batteries• Motor• Switch• Circuit board
Functional Analysis Example The engineer
makes an annotated sketch of the product and labels all of the visible components.
This information is used to write up a detailed analysis of the object’s sequential operation, or function.
Functional Analysis: Stapler
GBC Bates 640C Classic Deluxe Full Strip Stapler - BAT9864000
Functional Analysis Deliverable
1. Describe the product and its purpose or primary function.
2. Sketch an isometric pictorial of the product in your engineer’s notebook (both students do their own), and label the individual components. Describe and label the visible components. If you are not sure what a particular component is called, make up a descriptive label. Scan this for use later.
3. Create a “black box systems model” and identify the system inputs and outputs. Label the black box.
4. Black box: Make an educated guess about the product’s function that you cannot identify, because the mechanical components are hidden from plain view. Your “theory of operation” must include both the known (what you can see) and the unknown (what you can guess).
5. Describe which simple machines are used and how they help make the product perform its primary function.
6. This documentation should be in MS-Word and will become part of your technical report. Until then, you must present it as a PPT slide with illustrations.
Simple Machines
Machines consist of elements, such as wheels and axles, that work together (inputs) to transmit force and produce work (output).
No matter how complex, all machines are based on one or more simple machines that change the direction or magnitude of an applied force.
This change in force is referred to as “mechanical advantage.”
Class 1 Class 2Class 3
Explore types of levers by clicking
Learn about simple machines
Go to my Skyview web pages and click on the “Simple Machines” page Review the concepts You will be expected to identify the
simple machines in your product in your analysis.
Functional Analysis Review Watch the short video “SX-70” on my website
link. In your ENB take notes on the sequence of
operations necessary to perform its basic function.
After viewing the video, think about how your product works or functions and answer the following:
What are the sequence of operations? What are the simple machines involved? How does your product work? Create 1-2 sketches and
label them as in the video. What else you would need to know or see in order to
feel confident in the accuracy of your functional analysis?
What is your theory about how the “film” works?