Post on 13-Mar-2020
SANYO DENKI EUROPE SA. is pleased to introduce its San Ace 92AD AC fan, measuring 92mm square by 38mm thick. This fan works while internally converting AC power into DC power and provides the superior performance of a DC fan with the flexibility of AC input.
http://www.sanyodenki.eu P.A. PARIS NORD II 48 Allée des Erables-VILLEPINTE BP. 57286 F-95958 ROISSY CDG CEDEX France Phone : + 33 1 48 63 26 61
NPI0093_RevA_e
NEW PRODUCT INFORMATION
How to read Model Number*
9AD Product Range Performance Comparison
For further information on San Ace AD AC fan, please contact us at +33 1 48 63 26 61 or email us at info@sanyodenki.eu.
Main Specifications 9AD serie Size ................................. 2 sizes: 92 and 120mm square by 38mm thickness Air flow ........................... from 1.18 to 3m3/min - 41.7 to 106CFM Static pressure .............. from 56 to 90Pa Rated voltage ................. 100 to 240VAC Expected life time .......... 60,000 hours at 60°C Sensor ............................ low speed sensor (in option)
Target Applications Industry and factory automation Cabinets Air ventilation Measuring instruments Data storage PV inverters...
1
2
3
4
Product Features
Low Power Consumption
High Reliability
Wide Range of Input Voltage
Stable Rotating Speedrated voltage 100 to 240VAC
expected life time 60,000 hours at 60°C
up to 44% reduction
even at different input voltage and frequency conditions
9AD 09 01 H 12Sensor
12 no sensor1H low speed
Speed code
H, M
Frame thickness
01 38mm
Series name /frame material
9AD Plastic
Frame size
09 92x92mm12 120x120mm
Frame type
ribbed plastic frame1 ribless plastic frame
Max. Air Flow [m3/min]
Power consumption [W]
-44%
7
8
4
6
2
3
0
1
5
Current model 109S091New model 9AD0901H12
+140%
Life expectancy [hours]
100,000
0
25,000
60,000
9
10
1.75
2
1
1.5
0.5
0.75
0
0.25
1.25
2.25
2.5
AC Fan
Frame dimensions [mm]
Air
flow
[m3 /m
in]
0.1
NEW!
92
38
38
0.2
0.3
0.40.50.60.70.80.91
2
3
4567
910
8
120
+50%
(*) contact us for available model numbers
3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: +81 3 5927 1020 http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice. CATALOG No. C1051B001 ‘15.6
■ Option (unit: mm)
Resin filter kitsModel: 109-1001F13 (13PPI), 109-1001F20 (20PPI), 109-1001F30 (30PPI), 109-1001F40 (40PPI)
Plug cordModel: 489-1635-L10, 489-1635-L21Products compliant with Electrical Appliance and Material Safety Law, UL/CSA [c-UL] Certified UL FILE No.E43202
Outlet side Inlet side, Outlet side
Finger guardsModel: 109-099C Surface treatment: Nickel-chrome plating (silver)
Color
Model: 109-099E Surface treatment: Nickel-chrome plating (silver) : 109-099H : Cation electropainting (black)
Color
Model489-1635-L10489-1635-L21
Power cord length (L) [mm]1,0002,100
Pre-soldered
50±5
10±2
L
20 4 1710
15.5
810
8
4
Mass [g]3874
4-φ9.5±0.5
96.5±
1
82.5±
0.3
96.5±1
82.5±0.3
4-φ4.3±0.310.5±0.5
4-2±0.5Mass: 25 g
Mass: 22 g Mass: 29 g
120.
5 99
+1.
5ー
0.5
4.3±0.3 5+10
φ116.6
φ1.6φ1.6
φ39.8
φ87
4.3±0.3φ1.6φ1.6
φ116.6
φ87
120.
5+
1.5
-0.
5
99
5+1 0
φ16.2
Notice●Please read the "Safety Instructions" on our website once you have decided on a product for use.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
■ Common Specifications
□Material ・・・・・・・・・・・・・・・・・・・・・・・・・・□Expected Life ・・・・・・・・・・・・・・・・・・・・・
□Motor Protection System ・・・・・・・・・・□Dielectric Strength ・・・・・・・・・・・・・・・・
□Sound Pressure Level (SPL) ・・・・・・・・□Operating Temperature ・・・・・・・・・・・・□Storage Temperature ・・・・・・・・・・・・・・□Mass ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
Frame: Plastics (Flammability: UL94V-0), Impeller: Plastics (Flammability: UL94V-0)
Refer to specifications(L10: Survival rate: 90% at 60 ℃, rated voltage, and continuously run in a free air state)
Burnout protection at locked rotor condition
50/60 Hz, 1,500 VAC, 1 minute(between power terminal and frame or between lead conductor and frame)
Expressed as the value at 1 m from air inlet side
Refer to specifications (Non-condensing)
-30 ℃ to +75 ℃ (Non-condensing)
Approx. 250 g
92×92×38mm
Model No. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Frequency (Note)
[Hz]Rated input
[W]Max. Airflow[m3/min] [CFM]
Max. Static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expected life[h]
Rated speed[min-1]
0.08
0.06
9AD0901H12
9AD0901M12
4.5
3.0
3,850
3,100
1.50
1.18
53.0
41.7
90
56
0.36
0.22
40
33100 to 240 90 to 264 -20 to +75 60,000 / 60 ℃50 / 60
Note: 50/60 Hz compatible.
■ SpecificationsThe model no. below has ribs and no sensors. For models without ribs, append "1" to the model no.
Model No. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Frequency (Note)
[Hz]Rated input
[W]Max. Airflow[m3/min] [CFM]
Max. Static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expected life[h]
Rated speed[min-1]
0.08
0.06
9AD0901H1H
9AD0901M1H
4.5
3.0
3,850
3,100
1.50
1.18
53.0
41.7
90
56
0.36
0.22
40
33100 to 240 90 to 264 -20 to +75 60,000 / 60 ℃50 / 60
Note: 50/60 Hz compatible.
The model no. below has ribs and low-speed sensors. For models without ribs, append "1" to the model no.
■ FeaturesLow Power ConsumptionPower consumption is reduced by approximately 44% compared with our conventional AC fan.*
Wide RangeA rated voltage range of 100 to 240 VAC allows for usage in both 100 VAC and 200 VAC systems. Rotation speed remains constant even at different input voltages.
High Airflow and Static PressureThe maximum airflow of the San Ace 92AD type is approximately 1.5 times and the maximum static pressure is approximately 2.3 times higher than that of our conventional AC fan. *
Long LifeThe San Ace 92AD type has an expected life of 60,000 hours (approximately 6 years), approximately 2.4 times that of our conventional AC fan.*
*: Our conventional AC fan is 92 x 92 x 25 mm “San Ace 92”, Model No. 109S091 (50Hz 100V).
AC Fan
92
Outlet SideInlet Side
■ Reference Dimension of Mounting Holes and Vent Opening (unit: mm)
4-φ4.54-φ4.5
φ105
90.5
90.5
φ97
82.5±0.3 82.5±0.3
82.5
±0.
3
82.5
±0.
3
90.5
90.5
■ Dimensions (unit: mm) (With ribs)
Airflow directionRotating direction
Airflow directionRotating direction
Lead wire
Mounting Hole
Mounting Hole
AWG24UL1007
Standard
with SensorConnector: Tyco Electronics 171822-2 (Pin1 Sensor output: Yellow Pin2 -: Black)Contact: Tyco Electronics 170262-1
* Recommended connectors and contacts are listed below. Connector: Tyco Electronics 172211-2 Contact: Tyco Electronics 170376-1
38±0.5(4) (4)
82.5±0.3
92±0.5
4-φ4.3±0.3
82.5
±0.
392
±0.
5
4-φ4.3±0.3
100±
10
82.5±0.3
92±0.538±0.5
(4) (4)
82.5
±0.
3
92±
0.5
■ Specifications for Low-speed Sensors
VCE=+27.6 V DC max.Ic=10 mA max.[VCE (SAT) =1.0 V max.]
Sensor scheme
HH
L
Fan power
Fan speed Trip point
Sensor output
Startup delay Detection delay
Example 2: when the rotor is locked when the fan motor is
turned on and released after the start-up delay time.
HH
L
Fan power
Fan speed Trip point
Sensor output
Startup delay Detection delay
Example 1: when steady running
VCE (SAT) = 1.0 V max.
Typical standard model: 9AD0901H1HOutput circuit: Open collector
Inside of DC fan
Pull-up resistor
Pull-up voltage +27.6 V DC max.
Photocoupler
○-
Ic=10 mA max.SensorSensor output
(VCE)
9AD0901M1HStartup delay: 36±3 sec.
Detection delay: 3 sec. max.
Trip point: 850 min-1
9AD0901H1HStartup delay: 18±3 sec.
Detection delay: 3 sec. max.
Trip point: 1,700 min-1
■ Wiring Diagram
FAN
FANPhotocoupler Yellow
Black
10 mA max.
+27.6 V max.
Senser output
GND (0 V)
Standard with Sensor
AC
Po
wer
su
pp
ly
AC
Po
wer
su
pp
ly
Pull-up resistor
■ Airflow - Static Pressure Characteristics
(CFM)
(m3/min)
(Pa)(inch H2O)
→ S
tati
c p
ress
ure
→ Airflow
(CFM)
(m3/min)
(Pa)(inch H2O)
→ S
tati
c p
ress
ure
→ Airflow
20
0 0.4 0.8 1.2 1.6
40
60
80
100
100 20 30 40 50 60
0.1
0
0.2
0.3
0.4
20
0 0.4 0.8 1.2 1.6
10
30
40
50
60
100 20 30 40 50 60
0.05
0
0.10
0.15
0.20
0.25
100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz
9AD0901H129AD0901H1H
9AD0901M129AD0901M1H
92×92×38mm92
Outlet SideInlet Side
■ Reference Dimension of Mounting Holes and Vent Opening (unit: mm)
4-φ4.54-φ4.5
φ105
90.5
90.5
φ97
82.5±0.3 82.5±0.3
82.5
±0.
3
82.5
±0.
3
90.5
90.5
■ Dimensions (unit: mm) (With ribs)
Airflow directionRotating direction
Airflow directionRotating direction
Lead wire
Mounting Hole
Mounting Hole
AWG24UL1007
Standard
with SensorConnector: Tyco Electronics 171822-2 (Pin1 Sensor output: Yellow Pin2 -: Black)Contact: Tyco Electronics 170262-1
* Recommended connectors and contacts are listed below. Connector: Tyco Electronics 172211-2 Contact: Tyco Electronics 170376-1
38±0.5(4) (4)
82.5±0.3
92±0.5
4-φ4.3±0.382
.5±
0.3
92±
0.5
4-φ4.3±0.3
100±
10
82.5±0.3
92±0.538±0.5
(4) (4)
82.5
±0.
3
92±
0.5
■ Specifications for Low-speed Sensors
VCE=+27.6 V DC max.Ic=10 mA max.[VCE (SAT) =1.0 V max.]
Sensor scheme
HH
L
Fan power
Fan speed Trip point
Sensor output
Startup delay Detection delay
Example 2: when the rotor is locked when the fan motor is
turned on and released after the start-up delay time.
HH
L
Fan power
Fan speed Trip point
Sensor output
Startup delay Detection delay
Example 1: when steady running
VCE (SAT) = 1.0 V max.
Typical standard model: 9AD0901H1HOutput circuit: Open collector
Inside of DC fan
Pull-up resistor
Pull-up voltage +27.6 V DC max.
Photocoupler
○-
Ic=10 mA max.SensorSensor output
(VCE)
9AD0901M1HStartup delay: 36±3 sec.
Detection delay: 3 sec. max.
Trip point: 850 min-1
9AD0901H1HStartup delay: 18±3 sec.
Detection delay: 3 sec. max.
Trip point: 1,700 min-1
■ Wiring Diagram
FAN
FANPhotocoupler Yellow
Black
10 mA max.
+27.6 V max.
Senser output
GND (0 V)
Standard with Sensor
AC
Po
wer
su
pp
ly
AC
Po
wer
su
pp
ly
Pull-up resistor
■ Airflow - Static Pressure Characteristics
(CFM)
(m3/min)
(Pa)(inch H2O)
→ S
tati
c p
ress
ure
→ Airflow
(CFM)
(m3/min)
(Pa)(inch H2O)
→ S
tati
c p
ress
ure
→ Airflow
20
0 0.4 0.8 1.2 1.6
40
60
80
100
100 20 30 40 50 60
0.1
0
0.2
0.3
0.4
20
0 0.4 0.8 1.2 1.6
10
30
40
50
60
100 20 30 40 50 60
0.05
0
0.10
0.15
0.20
0.25
100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz100 to 240 V 50 / 60 Hz
9AD0901H129AD0901H1H
9AD0901M129AD0901M1H
92×92×38mm92
3-33-1, Minami-Otsuka, Toshima-ku, Tokyo, 170-8451, Japan TEL: +81 3 5927 1020 http://www.sanyodenki.com
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice. CATALOG No. C1051B001 ‘15.6
■ Option (unit: mm)
Resin filter kitsModel: 109-1001F13 (13PPI), 109-1001F20 (20PPI), 109-1001F30 (30PPI), 109-1001F40 (40PPI)
Plug cordModel: 489-1635-L10, 489-1635-L21Products compliant with Electrical Appliance and Material Safety Law, UL/CSA [c-UL] Certified UL FILE No.E43202
Outlet side Inlet side, Outlet side
Finger guardsModel: 109-099C Surface treatment: Nickel-chrome plating (silver)
Color
Model: 109-099E Surface treatment: Nickel-chrome plating (silver) : 109-099H : Cation electropainting (black)
Color
Model489-1635-L10489-1635-L21
Power cord length (L) [mm]1,0002,100
Pre-soldered
50±5
10±2
L
20 4 1710
15.5
810
8
4
Mass [g]3874
4-φ9.5±0.5
96.5±
1
82.5±
0.3
96.5±1
82.5±0.3
4-φ4.3±0.310.5±0.5
4-2±0.5Mass: 25 g
Mass: 22 g Mass: 29 g
120.
5 99
+1.
5ー
0.5
4.3±0.3 5+10
φ116.6
φ1.6φ1.6
φ39.8
φ87
4.3±0.3φ1.6φ1.6
φ116.6
φ87
120.
5+
1.5
-0.
5
99
5+1 0
φ16.2
Notice●Please read the "Safety Instructions" on our website once you have decided on a product for use.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●To protect against electrolytic corrosion that may occur in locations with strong electromagnetic noise, we provide fans that are unaffected by electrolytic corrosion.
■ Common Specifications
□Material ・・・・・・・・・・・・・・・・・・・・・・・・・・□Expected Life ・・・・・・・・・・・・・・・・・・・・・
□Motor Protection System ・・・・・・・・・・□Dielectric Strength ・・・・・・・・・・・・・・・・
□Sound Pressure Level (SPL) ・・・・・・・・□Operating Temperature ・・・・・・・・・・・・□Storage Temperature ・・・・・・・・・・・・・・□Mass ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
Frame: Plastics (Flammability: UL94V-0), Impeller: Plastics (Flammability: UL94V-0)
Refer to specifications(L10: Survival rate: 90% at 60 ℃, rated voltage, and continuously run in a free air state)
Burnout protection at locked rotor condition
50/60 Hz, 1,500 VAC, 1 minute(between power terminal and frame or between lead conductor and frame)
Expressed as the value at 1 m from air inlet side
Refer to specifications (Non-condensing)
-30 ℃ to +75 ℃ (Non-condensing)
Approx. 250 g
92×92×38mm
Model No. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Frequency (Note)
[Hz]Rated input
[W]Max. Airflow[m3/min] [CFM]
Max. Static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expected life[h]
Rated speed[min-1]
0.08
0.06
9AD0901H12
9AD0901M12
4.5
3.0
3,850
3,100
1.50
1.18
53.0
41.7
90
56
0.36
0.22
40
33100 to 240 90 to 264 -20 to +75 60,000 / 60 ℃50 / 60
Note: 50/60 Hz compatible.
■ SpecificationsThe model no. below has ribs and no sensors. For models without ribs, append "1" to the model no.
Model No. Rated voltage[V]
Operating voltage range
[V]
Rated current[A]
Frequency (Note)
[Hz]Rated input
[W]Max. Airflow[m3/min] [CFM]
Max. Static pressure[Pa] [inchH2O]
SPL[dB(A)]
Operating temperature
[℃]
Expected life[h]
Rated speed[min-1]
0.08
0.06
9AD0901H1H
9AD0901M1H
4.5
3.0
3,850
3,100
1.50
1.18
53.0
41.7
90
56
0.36
0.22
40
33100 to 240 90 to 264 -20 to +75 60,000 / 60 ℃50 / 60
Note: 50/60 Hz compatible.
The model no. below has ribs and low-speed sensors. For models without ribs, append "1" to the model no.
■ FeaturesLow Power ConsumptionPower consumption is reduced by approximately 44% compared with our conventional AC fan.*
Wide RangeA rated voltage range of 100 to 240 VAC allows for usage in both 100 VAC and 200 VAC systems. Rotation speed remains constant even at different input voltages.
High Airflow and Static PressureThe maximum airflow of the San Ace 92AD type is approximately 1.5 times and the maximum static pressure is approximately 2.3 times higher than that of our conventional AC fan. *
Long LifeThe San Ace 92AD type has an expected life of 60,000 hours (approximately 6 years), approximately 2.4 times that of our conventional AC fan.*
*: Our conventional AC fan is 92 x 92 x 25 mm “San Ace 92”, Model No. 109S091 (50Hz 100V).
AC Fan
92