Post on 13-Jan-2016
Abstract:
Tomato is one among three most important solanacious vegetables cultivated in
the world.
Tomato is cultivated in to methods such as direct seeding and transplanting and
transplanting occupies prime area.
Tillage operations (both primary and secondary) are important for better
production of tomato.
Country plough, mould board plough, disc plough and chisel plough are widely
used for tomato cultivation.
Disc harrows, cultivators, rotavator are used for finer operations.
Main field of tomato is modified in to ridges and furrows, beds and channels and
raised beds, of these, ridges and furrows are widely practiced.
PREVIOUS NEXT END
Learning objectives:
To learn the different tillage implements used for tomato cultivation.
To study the various land modifications practiced before planting or sowing of
tomato.
Introduction:
Tomato (Lycopersicon esculentum) is most important and remunerative
vegetable crop in the World. A rich source of minerals, vitamins and organic
acids, tomato fruit provides 3–4% of total sugar, 4–7% of total solids, 15–
30mg/100g of ascorbic acid.
Tomato is one of the most important three solanaceous vegetables (tomato,
chilli and brinjal/egg plant) grown in the world.
PREVIOUS NEXT END
It is comparatively tender crop and having moderately deep root system and hence
suitable field preparations ensure the better tomato cultivation.
Tillage is the mechanical manipulation of the soil and being practiced even prior to
crop production.
Good tilth provide amenable environment for tomato cultivation and is pre-
requisite.
Different tillage implements, both of animal and tractor drawn are used for
obtaining good tilth.
After tillage, the land is ready for raising tomato and certain modifications (like
ridges and furrows) are made to ease irrigation and other management and tomato
is sown or plantedPREVIOUS NEXT END
Methods of cultivation
Tomato is mainly cultivated in two methods, viz., direct seeding and
transplanting. However, transplanting is the most common and widely
practiced method.
1. Direct seeding
Direct seeding of tomato results in early flowering, early fruiting, early
yield and less incidence of pests and diseases.
The main field is prepared and after obtaining fine tilth the land is modified
according the situation and the seeds are sown directly.
PREVIOUS NEXT END
Seeding of 3–5 seeds in a clump at 25–30cm ensures 2–3 plants/clump.
Seeds should be sown 1.25 to 2.5cm deep.
After establishment of plants, thinning should be done to maintain 1–2
seedlings/hill.
Close spacing has the advantage of higher yield by direct seeding.
Due to light weight of seeds and the seeds are to be sown at shallow depth,
it is very difficult to make direct seeding and not practiced widely by many
of farmers.
PREVIOUS NEXT END
2. Transplanting
Transplanting method of planting comprises of two stages, 1.Raising
seedlings in nursery and 2. Transplanting in main field.
Nursery preparation
For raising the seedlings for one ha, about 250m2 area is required. Generally,
7.5m length and 1.2m to 1.5m width of nursery beds are preferred.
The bed are raised or elevated to the height of 5-10cm by making scooping
of soil in all four corners.
The beds are covered with a layer of well decomposed farmyard manure @
4kg/m2 and sand is mixed if the clay proportion is more
PREVIOUS NEXT END
Necessary seed treatment is practiced to reduce the ill effects of seedling in
nursery.
Soon after sowing, the beds should be irrigated with rose can and covered
with paddy straw.
The beds should be irrigated everyday morning. Seedlings are ready for
transplanting 4–5 weeks after sowing.
Hardening of seedlings before transplanting is essential for better setting in
the field.
Hardening is done by withholding water 4–5 days before uprooting
seedlings.
PREVIOUS NEXT END
Transplanting
Good seedlings obtained from the nursery are taken to main field and
planted. The field is prepared preferably as ridges and furrows of about
60cm and flat bed and raised bed methods are used.
Raised beds economize watering, there is less incidence of diseases and
pests and sometimes has the advantage of staking.
Mechanically harvested and processing tomatoes should be planted at close
spacing.
Hybrids are planted at wider spacing from row-to-row and close spacing of
plant-to-plant to facilitate mechanization
PREVIOUS NEXT END
Tillage for tomato
Tillage is the important operation carried out in tomato cultivation where
the soil is ploughed using implements to attain good tilth.
Primary tillage is the initial soil breaking ploughing and manipulating of
top 15-90 cm soil, whereas secondary tillage includes seedbed preparation
and intercultural operations up to a depth of 15 cm.
Tomato root system penetrates up to about 60 cm deep, both primary (deep)
and secondary (fine and shallow) tillages are necessary.
Both nursery and main fields, the tillage operations carried out are common
in tomato.PREVIOUS NEXT END
Primary tillage implements
Important primary tillage implements used for land preparation tomato are
country plough, mould board plough, disc plough and chisel plough.
Country plough is the most important plough used by many of the farmers
of developing country in tomato cultivation.
It is drawn only with bullocks and cuts a ‘V’ shaped furrow and opens the
soil, but no inversion is made.
Due to advent of mechanization, many of the modern ploughing
implements are introduced.
PREVIOUS NEXT END
Mould board plough is ploughing to the depth of about 30-40cm is highly
useful.
This implement is mainly attached to the tractor and soil inversion is main
advantage. Disc ploughs operate with 60cm diameter of discs and scoop-
out the soil and turns it.
Grassy weedy fields, the plough are a boon but, stony fields, these ploughs
can’t be used.
Chisel ploughs or sub-soilers are used for breaking the hard pan (formed
due to nature of soil or man made or due to compaction of heavy
machineries).
PREVIOUS NEXT END
Secondary tillage implements
After the opening up of soil or deep ploughing, the soil is to be made fine
and shallow ploughing is practiced.
Country plough is also used for the secondary tillage operation but,
cultivator and disc harrows attached to the tractor are widely used for
secondary tillage operation.
Cultivators with varied tynes (9 or 11 etc.) are used for finer and shallow
ploughing operation.
PREVIOUS NEXT END
The disc harrow consists of a number of concave discs of 45 to 55 cm in
diameter.
The discs cut through the soil and effectively pulverize the clods.
Rotavator are also put in use for breaking clods in many a case but, there is
possibility of damage of physical characters of the soil.
Generally, one deep ploughing using primary tillage implements followed
by two or three fine tillages are made prior to tomato cultivation.
PREVIOUS NEXT END
Land modification for tomato
Tomato is directly sown or transplanted in to the main field. Both of these,
mostly ridges and furrow method is commonly practiced.
However, beds and channels; and raised bed cultivation are also practiced in
certain cases.
Ridges of varying sizes (45 cm to 90cm) are formed depending on cultivar,
vigour of plant, irrigation method (surface or drip) etc.
Ridge ploughs of either attached to bullock pair or tractor are used for
making the ridges.
PREVIOUS NEXT END
After the ridges formation, channels are framed according to the
convenient. The seeds are sown or seedlings are transplanted in the sides of
the ridges.
Beds and channels are formed using bund former of animal drawn or
tractor drawn implements.
Based on slope, irrigation availability and other management factors, the
size of the beds is formed.
Commonly, 6 x 6m or 8 x 8m bed sized is formed. Raised beds are formed
in water stagnating areas and special implements used for this purpose.
PREVIOUS NEXT END
Summary:
Tomato is mainly cultivated in two methods, viz., direct seeding and
transplanting and of them, latter is more predominant.
Direct seeding of tomato results in early flowering, early fruiting, early
maturity and less incidence of pests and diseases.
Transplanting method of planting comprises of two stages, such as raising
seedlings in nursery and transplanting in the main field.
About 1.2m to 1.5m width of nursery beds are preferred for tomato nursery.
PREVIOUS NEXT END
Summary:
Mould board plough is widely used in tomato cultivation and soil inversion
is main advantage.
Disc ploughs scoop-out the soil, turns it and grassy weedy fields, the
plough are highly useful.
Cultivator and disc harrows attached to the tractor are widely used for
secondary tillage operation.
Tomato is cultivated in ridges and furrows, flat bed and raised bed methods.
Ridges and furrow method is commonly practiced method in tomato.
PREVIOUS NEXT END
• 1.Tomato is mostly cultivated through transplanting method
(True/False).
• 2.Mould board plough is mainly used for secondary tillage
purpose (True/False).
• 3.Disc ploughs are preferred in grassy field (True/False).
• 4.Cultivator and disc harrows are widely used for secondary
tillage operation (True/False).
• 5.Ridges and furrow method is commonly practiced method in
tomato (True/False).
PREVIOUS NEXT END
References
Singh, S.P. 2000. Commercial fruits. Kalyani Publishers, Ludhiana.
Kumar, N. 2000. Introduction to Horticulture. Rajalakshmi Publications,
Nagarcoil, Tamil Nadu.
Yellamanda Reddy, T. and G.H.Sankara Reddi. 2010. Principles of Agronomy.
Kalyani Publisher, Ludhiana.
PREVIOUS NEXT END