3D Printing + Additive Manufacturing

Simon Fraser, Professor of Industrial Design, Associate Dean (Research) VUW School of Design

A Revolution in Making2013 Healthcare Congress

DSDN104 Digital Creation. Coordinator Jeongbin Ok. Students: Jessica Campbell, Tyler Frenguelli, Thomas Hall, Sabrina Turner, Paul Jensen.

MAKING THE UNMAKABLE

OBJET PolyJet multi-material 3D printing www.kraftwurx.com/

MULTI-MATERIAL POLYMERS………………………………………LASER SINTERED/MELTED METALS

Nanoscribe Laser Lithography. T.Streibl, M.Bastmeyer, KIT (Germany) Mataerial 3D printer: Petr Novikov, Saša Jokić, Joris Laarman.

MICRO……………………………………………………………………………………………………………………MACRO

Coleman Product Design. Source: Design secrets. 50 real-life projects uncovered / IDSA

APPLICATIONS: RAPID PROTOTYPING…………………………………………………AND USER TESTING

Oxford Performance Materials (OPM). OsteoFab Cranial Device (biocompatible thermoplastics)

APPLICATIONS: IMPLANTS

Selective Laser Melting (titanium) SLM Solutions GmbH

Dr.Wayne Gillingham, Oral & Maxillofacial Surgeon, Welloral

APPLICATIONS: PRE-OPERATIVE VISUALISATION, ANALYSIS……………..…….AND PREPARATION

3D printed tracheal splint. G.Green, S.Hollister, University of Michigan Health System

A.Krieger, Children's National Medical Centre, Washington DC. A.Voisard,Washington Post

PRE-OPERATIVE VISUALISATION, ANALYSIS………………….AND PREPARATION

APPLICATIONS……………………………………………………………..SCAFFOLDS AND BIO-MATERIALS

Dr.Wayne Gillingham , Oral & Maxillofacial Surgeon, Welloral 3D printed bio-mineralised scaffold, Kate McGrath, Director, MacDiarmidInstitute

NEW INTERPRETATIONS…………………………………………..OF EXISTING PRODUCTS

INDN311 Digital Form, Coordinator Ross Stevens, Student Jake Evill

INDN311 Digital Form, Coordinator Ross Stevens, Student Jake Evill

NEW INTERPRETATIONS……………………………………………………………………OF EXISTING PRODUCTS

Master of Design Innovation. Student: Earl Stewart, Supervisor: Ross Stevens

NEW INTERPRETATIONS……………………………………………………………………OF EXISTING PRODUCTS

Master of Design Innovation. Student: Earl Stewart, Supervisor: Ross Stevens

NEW INTERPRETATIONS……………………………………………………………………OF EXISTING PRODUCTS

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group: Gina Rawlings (group leader), Sean Antrobus, Lisa Howell, James Mayne, Ulrich Meyer, Mark Owbridge, Andrew Porter, Mauricio Vera, Jasun Woods.

ENTIRELY NEW PRODUCTS…………………………….AND SERVICES

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

INDN341 Mass Production + Digital Manufacturing. Coordinator Ross Stevens. NEXUS group.

NEW PRODUCTS………………………………………………………………….……………SERVICES AND SYSTEMS

COLLABORATIVE AM RESEARCH……………..AND FACILITIES

Contact: The Materials Accelerator, Director, Professor Mark Taylor, University of Auckland. mark.taylor@auckland.ac.nz http://www.materialsaccelerator.co.nz/index.html

AM RESEARCH AND FACILITIES..….AT AUCKLAND UNIVERSITY OF TECHNOLOGY• Z-Corp printers 310, 510

Plaster, sand-casting material, colour

• FDM Dimension 768White ABS

• EOS P110Nylon

• Renishaw 250 (Selective Laser Melting)Metals, i.e. Al, Ti, SS, CoCr, NiCr

• Research Set-upsFDM, Laser Sintering

Contact: Thomas Neitzert, Professor of Mechanical Engineering, Director, Engineering Research Institute (ERI) thomas.neitzert@aut.ac.nz

• FDM Dimension 768White ABS

• EOS P110Nylon

• Research Set-upspellet based FDM, Laser Sintering

AM RESEARCH AND FACILITIES………………………………..AT MASSEY UNIVERSITY

Contact: Olaf Diegel, Professor of Mechatronics, School of Engineering & Advanced Technology, MasseyUniversity o.diegel@massey.ac.nz

AM RESEARCH AND FACILITIES………….…………………AT VICTORIA UNIVERSITY

• STRATASYS/OBJET Eden250vRigid photopolymers

• STRATASYS/OBJET Connex 350PolyJet multi-material 3D printing

• Research Set-upsMulti-material 3D printing, functionalmaterials and surfaces

Contact: Simon Fraser, Professor of Industrial Design, Associate Dean Research, VUW School of DesignSimon.Fraser@vuw.ac.nz