ARX Vehicle Barriers offer an unparalleled level of protection from VAAW (Vehicle As A Weapon) attacks and are a crucialpart of any Hostile Vehicle Mitigation (HVM) strategy. They provide a vehicle secure perimeter while still allowing theingress and egress of permitted vehicles. Units offer surface mount (no excavation required) 16’ (4.9M) clear opening Barrier with an ASTM M40 or K8 rating. Unitsare tested to stop a 15,000 Lb. (6,800KG) vehicle at 40 MPH (64 KPH)

V E H I C L E B A R R I E R

A B O U T   V E H I C L E B A R R I E R

Unit 4, Sycamore Road, Trent Lane Industrial Estate, Castle Donington, Derby, DE74 2NW

Sales: +44 (0)1332 814080 | Email: info@arxuk.com | Website: www.arxuk.com

Sales: +44 (0)1332 814080 Email: info@arxuk.com Website: www.arxuk.com

T E C H N I C A L

ARX Vehicle Barriers are simply towed or placed in the road at the desired strategic location and lowered hydraulicallyinto place.

BUTRESS

ROADPLATE

TORSION AXLES WITHHYDRAULIC SURGE BRAKESPROVIDE SMOOTH TOWING

HYDRAULIC POWER UNIT WITHOPTIONAL FULL REMOTE/LOCAL

AUTOMATIC OPERATION AND INTEGRALCHARGER

OPTIONAL SOLAR PANEL CHARGER

DEPLOYMENTHYDRAULICCONTROLS

CONTROLSTATION

SPARETYRE

Sales: +44 (0)1332 814080 Email: info@arxuk.com Website: www.arxuk.com

Unit 4, Sycamore Road, Trent Lane Industrial Estate, Castle Donington, Derby, DE74 2NW

Sales: +44 (0)1332 814080 | Email: info@arxuk.com | Website: www.arxuk.com

S E T - U P A N D M A N E U V E R A B I L I T Y

RECOVERY TIME

S P E C I F I C A T I O N S A N D D I M E N S I O N S

LENGTH

CRASH RATING

CLEAR VEHICLE OPENING

DEPLOYMENT TIME

WIDTH

M40/K8/PAS68

13ft 3” x  6ft 3” (4.05m x 1.9m) 

2,950kg (6,503lb)

60 minutes

40 minutes

110v, 5amp, 60hz

1 2 3

4 5 6

The barrier is towed to the destinationwhere you require it to be used andlowered to the ground using integratedhydraulics.

Using a range of tools, the trailer chassisis removed and placed wheeled away.

The Barrier is then lifted up usinghydraulics. Using the deploymentrotation device supplied, it is turned intoplace.

The buttons on the adjacent controlpanel can then be used to operate thebarrier plate.

When a vehicle approaches; simply holdthe open button to release the barrierplate.

The vehicle can then cross the barrierand the close button can be pressed tobring the barrier plate back up, intoposition.