Post on 30-Jan-2022
128
5. Program Effectiveness – Outcomes Assessment
5.1 Learning Outcome Assessment Procedures The objectives of the BS degree program in Metallurgical Engineering are
1. Graduates will be practicing professionals or engaged in graduate/advanced studies in metallurgical engineering or related areas,
2. Graduates will continue to expand their knowledge and capabilities and contribute effectively to their chosen profession and to society, and
3. Graduates will demonstrate technical and interpersonal skills that promote success in their career.
The program outcomes have been established to assess how the program meets the departmental and ABET objectives. The chosen program outcomes incorporate development of all of the abilities required in the students graduating from this program. The program outcomes established are
A. Ability to apply knowledge of mathematics, science, and engineering
B. Ability to design and conduct experiments, and interpret data
C. Ability to design technically and financially sound processes, equipment, or materials to reflect environmental and social responsibility
D. Understand structure-property-processing relationships in metallic materials
E. Function on multi-disciplinary teams
F. Ability to identify, formulate, and solve engineering problems
G. Understanding of professional and ethical responsibility
H. Ability for effective oral and written communication
I. Appreciate the global impact of metallurgical engineering profession/practice
J. Ability to recognize the need for and to engage in life-long learning
K. Understand contemporary issues in metallurgical engineering
L. Ability to use techniques, skills, and modern engineering tools necessary for engineering practice
The program outcomes and contribution of each course to pro-gram outcomes are documented in Course Management Surveys and student evaluations for each course.
The objectives are linked to one or more outcomes as shown below.
129
Objectives
Outcomes 1 2 3
A. Ability to apply knowledge of mathematics, science, and engineering X X X
B. Ability to design and conduct experiments, and interpret data X X X
C. Ability to design technically and financially sound processes, equipment, or materials to reflect environmental and social responsibility
X X X
D. Understand structure-property-processing relationships in metallic materials X X X
E. Function on multi-disciplinary teams X X X
F. Ability to identify, formulate, and solve engineering problems X X X
G. Understanding of professional and ethical responsibility X X X
H. Ability for effective oral and written communication X X X
I. Appreciate the global impact of metallurgical engineering profession/practice X X X
J. Ability to recognize the need for and to engage in life-long learning X X X
K. Understand contemporary issues in metallurgical engineering X X X
L. Ability to use techniques, skills, and modern engineering tools necessary for engineering practice X X X
5.1.1 Assessments/Evaluations The department has adopted the campus-wide student evaluation scheme in almost all the
departmental courses. This scheme is well understood by students, and the departmental Student Advisory Committee administers the evaluations. Under this scheme faculty receive feedback on the standard questions relating to faculty teaching performance and to the course itself. In addi-tion faculty can select from a menu of questions to probe student reactions to any specific aspects of a course that are of particular interest. This makes it easy to obtain formal student reaction to the introduction of new presentation or educational techniques. Faculty can then modify course material and methods accordingly.
The assessment of outcomes of courses and curriculum is made using data collected from Course Evaluation Surveys, Course Management Surveys incorporating faculty feedback, Exit Interview Surveys of undergraduate students, and Alumni Surveys, Employer Surveys, and the Graduate Council Review (Table 5.1). Most recent assessment is based on data collected from
130
Course Management Surveys (2009–2015) incorporating Course Evaluation Surveys (2009–2015), Exit Interview Surveys (2009–2015), Alumni Surveys (2009–2015), Employer Surveys (2014), ABET review (2015/2016) and the Graduate School Review (2010-12).
Table 5.1 Program Assessments from Various Assessment Tools
Assessment Tool Nature of Input Frequency Program Assessment Course Management Surveys Quantitative Every Semester Very Good to Excellent Exit Interviews Qualitative/
Quantitative Once a year Very Good to Excellent
Alumni Survey Rating Quantitative Once a year Very Good Employer Survey Ratings Quantitative Formally once or
twice during cycle Very Good
Graduate School Review Qualitative About 7 years Excellent ABET Review Qualitative About 7 years Excellent
Tenure-track faculty are reviewed annually for merit salary increases. Criteria considered include teaching effectiveness, scholarly productivity, service, and professional reputation. The reviewing body evaluates each faculty member and provides a confidential ranking for consideration in awarding merit increases. Anonymous student course evaluations provide quantitative and qualitative measures of teaching performance that weigh seriously in retention, tenure, promotion and merit review deliberations. Special recognition for outstanding teaching is considered in reviewing teaching performance, as is initiation of new courses or substantial revision of existing courses. Research productivity is measured by numbers of substantial papers in refereed technical journals, external research grants, graduate students supervised, and special awards from professional societies. Service to the Department, the College and the University through faculty committees and positions of leadership (e.g., committee chair) helps determine the service component. Public service includes membership on various government and civic boards, and on committees and leadership positions in professional societies.
5.1.2 ABET Review Assessment of our program is afforded by ABET reviews, which have given the Metallur-
gical Engineering program high marks in 2003, 2010, and 2016. (Please see Appendix K.)
5.1.3 Advisory Committee Review Further assessment of our program has been provided by our Advisory Committee Review,
most recently in May, 2015. The Advisory Committee consists of the following members:
Donald G. Foot Jr., CEO, Versa Gold Dr. Pinakin Chaubal, General Manager, Process Portfolio, Global R & D,
ArcelorMittal Research and Development Dr.Steve Hughes , President, Ceramatec
131
Rick Gilbert, VP, Freeport McMoran Dave Kinneberg, President, James Avery, Dallas, TX Dr. R. Neale Neelameggham, Consultant/Magnesium, Ind LLC, Salt Lake City Philip Thompson, Director Dawson Metallurgical Laboratories, F. L. Smidth
Minerals, Inc., Salt Lake City Karen Quinn, Senior Manager Internal Audit, ATk/Orbital Launch Systems Heidi Maupin, Army Research Lab Dr. Ray Peterson, Aleris International Scott Bird, RioTinto
Many of their comments refer to both undergraduate and graduate programs, and the feedback is being used to improve the program.
5.2 Undergraduate Learning Outcomes Assessment Feedback Course Management Survey input was obtained from the faculty for each departmental
course. For quantitative assessment, contribution to each of the outcomes (A to L) by each course is assigned by the instructor on a scale of 0 to 6. The total contribution to each outcome from all the courses is obtained by adding all these units (weighted for credit-hour assignment of each of the courses and the total units assigned for the outcomes by the instructor of each course). Results of the survey are shown in Tables 5.2 to 5.6. The survey and its assessment indicate that the curriculum is resulting in the outcomes expected from the program.
Course evaluations are used to constantly assess and improve the individual courses. The Department Chair monitors these evaluations and communicates to the faculty whenever any specific changes are needed. The average ratings for satisfaction with respect to various outcomes are above 5 on a scale of 1 to 6 (1 being low) as shown in Tables 5.7, 5.8 and 5.9.
Alumni, Advisory Committee, employer, and senior exit surveys provided qualitative inputs on satisfaction with the program offerings, quantitative inputs regarding the program outcomes, and the needed improvements to the program. All of these surveys indicate a high level of satisfaction regarding the nature of curriculum and the performance of the graduates in industry.
The alumni survey indicated assessment scores in the range of 3.4 to 5.0 for various program outcomes on a scale of 1 to 5, with 5 indicating maximum satisfaction and 1 indicating least satisfaction. The alumni assessment of courses offered by the department indicates satisfac-tion with ratings in the range of 3.0 to 4.6 on a scale of 1 to 5. Many of the suggested changes or improvements to existing courses or new courses were already in place by the time of the survey. (See Tables 5.10 to 5.13.)
Employer surveys gave assessment scores in the range of 3.5 to 5 and average 4.25 over various outcomes (Tables 5.14).
The exit interviews indicated an overall satisfaction with the program offerings (4 to 4.5, on a scale of 1 to 5) (Tables 5.15-5.17). The exit interview assessments of core courses offered by the department indicate satisfaction with ratings in the range of 2.5 to 3.7 on a scale of 1 to 5. All the graduates of the program have found gainful employment. The curriculum has been constantly upgraded, so that many of the suggestions have already been implemented.
132
The assessment of the department for undergraduate and graduate education by the Graduate Council in 2010 was excellent. We are scheduled for another Graduate Council review of the graduate and undergraduate programs in the 2016/2017 academic year.
The instructors of the department’s courses are very experienced educators and highly accomplished researchers. The averages of course evaluations and the instructor ratings are very high in general, 5.32 and 5.24 respectively, on a scale of 1 to 6. Many of the courses are well established, and continuously updated and enhanced, providing the students the best educational experience. Overall the students express satisfaction with the curriculum, and any concerns expressed by students are addressed as appropriate. Any changes made in the curriculum and methods of instruction affecting various outcomes are addressed for each outcome. The process for outcomes assessment and implementation of changes is illustrated in Figure 5.1.
Figure 5.1 Outcomes assessment and implementation of changes.
133
5.2.1 Relationship of Courses in the Curriculum to the Program Outcomes 5.2.1.1 COURSE MANAGEMENT SURVEY
The relationship of courses in the curriculum to the Program Outcomes based on Course Management Survey data from individual courses is presented here. The data on contribution to various outcomes from Course Management Surveys of the courses as assessed by the instructors were presented in Tables 5.2 to 5.4. The level of activity for each outcome averaged over core departmental and non-departmental courses, plus equivalent credit hours devoted to each outcome, are shown in Tables 5.5 and 5.6.
Table 5.2. Summary of Results from Course Management Survey for Required MET E Courses, 2015 Showing Relative Emphasis of Various Outcomes in the Course
Course Number Title ABET Outcomes
A B C D E F G H I J K L MET E 1610 Introduction to Extractive Metallurgy 4 1 2 3 4 4 2 5 6 3 4 3 MET E 1620 Introduction to Physical Metallurgy 4 4 3 6 0 3 0 2 0 1 3 4 MET E 3070 Statistical Methods in Earth Sci & Eng 6 6 2 0 0 6 0 6 0 1 0 3 MET E 3220 Material and Energy Balances 5 3 4 0 1 5 1 3 2 3 3 4 MET E 3500 Fluid Flow 4 4 3 0 2 4 2 2 2 1 2 4 MET E 3530 Experimental Techniques in Metallurgy 5 6 2 2 4 2 2 4 2 1 3 4 MET E 3620 Thermodynamics and Phase Equilibria 5 1 1 4 0 5 1 2 2 3 2 4 MET E 4990 Undergraduate Seminar 1 0 1 1 1 1 2 3 3 3 3 1 MET E 5260 Physical Metallurgy I 6 4 3 6 1 3 2 2 4 2 3 4 MET E 5450 Mechanical Metallurgy 6 2 4 6 5 3 2 2 2 1 3 3 MET E 5670 Mineral Processing I 6 6 6 5 5 5 2 5 3 3 4 6 MET E 5680 Mineral Processing II 6 6 6 5 5 5 2 5 3 3 4 6 MET E 5690 Process Engineering Statistics 5 6 2 0 0 5 2 4 1 1 0 4 MET E 5700 Hydrometallurgy 5 4 3 0 2 3 2 3 2 2 3 4 MET E 5710 High Temperature Chemical Processing 6 6 6 3 3 6 5 5 6 4 6 5 MET E 5750 Rate Processes 6 6 6 3 3 6 4 5 4 5 5 6 MET E 5760 Process Synthesis, Design & Econ 6 3 6 6 2 6 4 5 3 2 3 5 MET E 5780 Metals Processing 3 3 3 6 3 2 1 2 1 1 2 3
Activity Levels: 0 No activity 6 High activity, essential
Course folders contain results from each semester the course was taught and for which data is available and the summary provided here.
134
Table 5.3. Summary of Results from Course Management Survey for Elective MET E Courses, 2015
Course Number Title ABET Outcomes
A B C D E F G H I J K L MET E 5210 Nuclear Materials 6 3 4 3 1 6 2 2 4 3 4 4 MET E 5240 Transmission Electron Microscopy 6 4 2 3 1 2 2 3 2 2 2 6 MET E 5270 Powder Metallurgy 4 2 2 6 0 5 2 1 0 0 2 6 MET E 5280 Magnetic Materials &Devices 6 0 6 6 0 0 0 0 0 0 0 0 MET E 5290 Nanoscience and Technology 6 1 2 4 3 2 2 2 6 4 6 1 MET E 5320 Materials and the environment 3 2 6 4 6 3 3 3 6 6 6 3 MET E 5600 Corrosion Fundamentals 5 1 3 1 2 3 1 1 0 1 3 4 MET E 5660 Surfaces and Interfaces 4 2 1 4 5 4 1 6 1 2 5 3 MET E 6300 Alloy & Material Design 6 3 2 6 3 3 3 3 2 2 2 4
Table 5.4. Summary of Results from Course Management Survey for Other Required Engineering and Science Courses, 2015
Course Number Title ABET Outcomes*
A B C D E F G H I J K L CHEM 1210 General Chemistry I 6 0 0 0 0 0 0 0 0 0 0 4 CHEM 1215 General Chem. I Lab 6 0 0 0 0 0 0 0 0 0 0 4 CHEM 1220 General Chem II 6 0 0 0 0 0 0 0 0 0 0 4 CHEM 1225 General Chem II Lab 6 0 0 0 0 0 0 0 0 0 0 4 CHEM 3060 Physical Chemistry I 6 0 0 0 0 0 0 0 0 0 0 4 MATH 1210 Calculus I 6 0 0 0 0 0 0 0 0 0 0 4 MATH 1220 Calculus II 6 0 0 0 0 0 0 0 0 0 0 4 MATH 2250 ODE's & Lin Alg 6 0 0 0 0 0 0 0 0 0 0 4 MATH 2210 Calculus III 6 0 0 0 0 0 0 0 0 0 0 4 CP SC 1000 Eng Computing 4 2 4 0 0 4 0 0 0 0 0 6 WRTG 2010 Intermediate Writing 6 0 0 0 0 0 0 0 0 0 0 4 PHYCS 2210 Phys for Science & Eng 6 0 0 0 0 0 0 0 0 0 0 4 PHYCS 2220 Physics for Science & Eng 6 0 0 0 0 0 0 0 0 0 0 4 PHYCS 1809 Gen Physics Lab 6 0 0 0 0 0 0 0 0 0 0 4 EL EN 2200/2210 El En for Non-majors H M L - L M - L - - - M ME EN 1300 Statics/Strength H - H - M - M - - M M M
*Outcome assessments are as reported by the relevant departments and the totals for each course therefore vary.
135
Table 5.5 Average Outcome Activity Level and Equivalent Credit Hour Devoted to Each Outcome for Required And Elective MET E Courses, 2014
A B C D E F G H I J K L Average Outcomes for MET E Courses Weighted For Credit Hours 4.1 3.0 2.7 2.5 1.7 3.2 1.5 2.7 1.8 1.6 2.2 3.2 No. of Equivalent Credit Hours Devoted Towards Each Outcome 7.8 5.7 5.1 4.7 3.2 6.1 2.8 5.1 3.4 3.1 4.2 6.0
Table 5.6 Average Outcome Activity Level and Equivalent Credit Hour Devoted to Each Outcome for Other Required Engineering and Science Courses*
A B C D E F G H I J K L Av. of Outcomes Weighted for Credit Hrs. 5.9 0.3 0.9 0.0 0.4 0.5 0.3 0.1 0.0 0.3 0.3 4.3 No. of Equivalent Credit Hours Devoted Towards Each Outcome 21.3 1.1 3.4 0.0 1.4 1.8 1.2 0.2 0.0 1.2 1.2 15.6
*Outcome assessments are as reported by the relevant departments, and the totals for each course therefore vary.
5.2.1.2 COURSE EVALUATIONS The course evaluations for the departmental courses show course composite rating of 5.24
± .1 and instructor composite rating of 5.32 ± 0.09 for 2009–2015 on a scale of 1 to 6 (Figures 3.1 and 3.2).
Figure 5.2. Metallurgical Engineering instructor composite rating
136
Figure 5.3. Metallurgical Engineering course composite rating
The average satisfaction rating of outcomes are generally in the range of 5.0 to 5.2, suggesting that the course instruction leads to desired level outcomes A through L (see Tables 3.7 to 3.9).
Table 5.7. Summary of Results from Course Evaluations for Required MET E Courses, 2009-2015*
Course Number Title
ABET Outcomes A B C D E F G H I J K L
MET E 1610 Introduction to Extractive Metallurgy 5.2 5.0 4.9 5.1 5.1 5.0 5.0 5.0 5.2 5.1 5.1 5.0
MET E 1620 Introduction to Physical Metallurgy 5.1 4.8 4.9 5.2 4.9 4.9 4.9 4.8 5.2 4.8 5.0 4.9
MET E 3070 Statistical Methods in Earth Sci & Eng 4.9 4.8 4.4 4.2 4.6 4.8 4.4 4.6 4.4 4.4 4.2 4.6
MET E 3220 Material and Energy Balances 5.1 4.9 4.7 4.8 4.5 5.0 4.5 4.5 4.5 4.7 4.6 5.0 MET E 3500 Fluid Flow 5.2 5.2 5.1 5.1 5.1 5.2 5.1 5.2 5.2 5.2 5.1 5.3 MET E 3530 Experimental Techniques in
Metallurgy 5.4 5.2 5.3 5.1 5.4 5.2 5.2 5.0 5.0 5.2 5.2 5.3 MET E 3620 Thermodynamics and Phase
Equilibria 5.6 5.3 5.4 5.3 5.2 5.6 5.4 5.2 5.3 5.5 5.4 5.5
MET E 4990 Undergraduate Seminar 4.8 0.0 4.9 4.9 4.8 4.8 5.1 5.1 5.2 5.3 5.2 4.9
137
Course Number Title
ABET Outcomes A B C D E F G H I J K L
MET E 5260 Physical Metallurgy I 5.4 4.9 5.1 5.5 5.0 5.3 5.1 5.1 5.2 5.1 5.2 5.4 MET E 5450 Mechanical Metallurgy 5.4 5.3 5.3 5.4 5.1 5.4 5.3 5.4 5.4 5.4 5.4 5.3 MET E 5670 Mineral Processing I 5.3 5.2 5.3 5.3 5.2 5.2 5.3 5.3 5.4 5.2 5.3 5.3 MET E 5680 Mineral Processing II 5.3 5.1 5.3 5.2 5.2 5.2 5.3 5.3 5.4 5.2 5.3 5.3 MET E 5690 Process Engineering Statistics 5.3 5.2 5.1 5.0 5.0 5.2 5.2 5.2 5.0 5.3 5.1 5.2 MET E 5700 Hydrometallurgy 5.1 5.1 5.2 5.0 5.1 5.1 5.1 5.1 5.1 0.0 5.1 5.2 MET E 5710 High Temperature Chemical
Processing 5.1 5.7 4.9 5.0 4.8 5.2 5.2 5.1 5.4 0.0 5.3 5.2
MET E 5750 Rate Processes 5.3 4.9 5.0 4.8 4.6 5.2 5.1 5.0 5.0 5.3 4.9 5.2 MET E 5760 Process Synthesis, Design &
Econ 5.3 5.2 5.5 5.4 5.4 5.1 5.4 5.4 5.6 5.5 5.5 5.4
MET E 5780 Metals Processing 4.8 5.2 5.0 5.2 4.7 4.8 4.8 4.9 4.9 5.4 5.1 5.0 Activity Levels: 0 No activity 6 High activity, essential
*Course folders contain results from each semester the course was taught, and a summary is provided here.
138
Table 5.8. Summary of Results from Course Evaluations for Elective MET E Courses, Fall 2009-Spring 2015 *
Course Number Title
ABET Outcomes A B C D E F G H I J K L
MET E 5210 Nuclear Materials 5.4 5.2 5.1 5.6 5.2 5.3 5.7 5.5 5.7 3.9 5.7 5.3 MET E 5240 Transmission Electron
Microscopy 5.2 5.3 5.2 5.2 5.3 5.2 5.3 5.2 5.1 5.2 5.2 5.3 MET E 5270 Powder Metallurgy 4.8 4.8 4.8 5.0 4.9 4.8 4.9 4.9 5.0 0.0 0.0 5.1 MET E 5280 Magnetic Materials
&Devices ND ND ND ND ND ND ND ND ND ND ND ND MET E 5290 Nanoscience and
Technology 5.0 4.2 4.6 5.2 4.8 4.9 5.0 4.8 5.3 4.8 5.3 5.1
MET E 5600 Corrosion Fundamentals 5.3 5.4 4.8 5.2 5.3 5.1 5.2 5.3 5.5 5.2 5.0 5.1 MET E 5660 Surfaces and Interfaces ND ND ND ND ND ND ND ND ND ND ND ND MET E 6300 Alloy & Material Design 5.9 5.6 5.2 5.4 5.3 5.5 5.4 5.5 5.7 5.6 5.5 5.4
MET E 5320 Materials and the environment* 4.8 4.9 4.9 4.8 5.7 4.9 5.2 5.4 5.4 5.1 5.2 5.1
Average 5.2 4.3 5.0 5.2 5.2 5.1 5.2 5.2 5.4 4.0 4.5 5.3
ND – No data available because of too few responses or other reasons
* Course folders contain results from each semester the course was taught and summary provided here)
Table 5.9 Summary of Results from Course Evaluations for Core and Elective MET E Courses, 2009-Spring 2015.
Student Responses A B C D E F G H I J K L
All Core MET E Courses (49 Credit hours) 5.2 5.1 5.1 5.1 5.0 5.1 5.1 5.0 5.1 5.1 5.1 5.1
Elective METE Courses (8 credit hours) 5.2 4.3 5.0 5.2 5.2 5.1 5.2 5.2 5.4 4.0 4.5 5.3
Average 5.2 5.0 5.1 5.1 5.0 5.1 5.1 5.1 5.2 5.0 5.0 5.2
5.2.1.3 RESULTS FROM ALUMNI SURVEY (2009-2015) The respondents to the annual alumni surveys (2009–2015) expressed satisfaction with the
metallurgical engineering training that they received. For nearly all the respondents, the first job in their career was highly related to metallurgical engineering. Some of the alumni have moved into areas unrelated to metallurgical engineering, but the majority of them have remained in jobs related to metallurgical engineering. The current work areas of respondents cross a broad
139
spectrum that includes physical metallurgy, mineral processing, extractive metallurgy, law, consulting, sales and management. The faculty felt that this reinforces the importance of continuing the broad training given in all areas of metallurgy by the department.
The faculty felt that training in all of the areas has been strengthened in recent years and will continually update the various courses. The respondents indicated that all the core courses taught are important, and the extent of importance varied depending on their current work areas (Tables 5.10 and 5.11). The responses to question regarding the assessment of the program outcomes (Tables 5.12 and 5.13) indicated satisfaction in all areas of the training.
The faculty felt that some of the suggested changes in curriculum have already been im-plemented. The issue of training in economics, business, and management is now addressed through a single course in engineering economics and the capstone design course. Alternative avenues are being explored within the constraint of the limited number of credit hours that can be allocated for the undergraduate degree.
Table 5.10 Importance of Required Departmental Courses from Respondent’s Perspective and Professional Experience (on a scale of 1 to 5)
(Average Scores from 41 alumni responses received 2009 through 2015)
REQUIRED COURSES Average MET E 1610 Introduction to Extractive Metallurgy 4.1 MET E 1620 Introduction to Physical Metallurgy 3.9 MET E 3070 Statistical Methods in Earth Sci & Eng 4.2 MET E 3220 Material and Energy Balances 4.2 MET E 3500 Fluid Flow 3.5 MET E 3530 Experimental Techniques in Metallurgy 4.0 MET E 3620 Thermodynamics and Phase Equilibria 3.7 MET E 5260 Physical Metallurgy I 3.6 MET E 5450 Mechanical Metallurgy 3.6 MET E 5670 Mineral Processing I 3.8 MET E 5680 Mineral Processing II 3.7 MET E 5690 Process Engineering Statistics 4.4 MET E 5700 Hydrometallurgy 3.8 MET E 5710 High Temperature Chemical Processing 3.5 MET E 5750 Rate Processes 3.7 MET E 5760 Process Synthesis, Design & Econ 3.8 MET E 5780 Metals Processing 3.8
Table 5.11 Importance of Elective Departmental Courses from Respondent’s Perspective and Professional Experience (on a scale of 1 to 5)
(Average Scores from 41 alumni responses received 2009 through 2015)
MET E 5210 Nuclear Materials 2.2
140
MET E 5240 Transmission Electron Microscopy* 3.5 MET E 5270 Powder Metallurgy 3.3 MET E 5280 Magnetic Materials & Devices 3.1 MET E 5290 Nanoscience and Technology 3.2 MET E 5300 Alloy & Material Design 3.8 MET E 5320 Materials and the Environment New course MET E 5600 Corrosion Fundamentals 3.8 MET E 5800-001
Special Topics in Metallurgical Eng (i) Industrial Internship 2.8
*New course
Table 5.12 Alumni Survey: Importance of preparation in the outcome skills.
A B C D E F G H I J K L Average (2009-2015) 4.8 4.6 4.4 4.5 4.5 4.9 4.5 4.9 3.8 4.3 3.9 4.5 2009 4.8 4.4 4.3 ND 4.6 4.9 4.7 5.0 3.8 3.6 3.3 4.2 2010 4.7 4.7 4.6 ND 4.2 4.9 4.4 4.8 3.8 4.1 4.0 4.3 2014 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.0 4.0 4.0 4.0 2015 4.8 4.5 4.3 4.5 4.6 4.8 4.5 5.0 4.0 4.7 4.2 4.8
Table 5.13 Alumni Survey: Level of satisfaction with preparation in the outcome skills.
A B C D E F G H I J K L Average (2009-2015) 4.6 4.1 3.7 4.3 3.6 4.3 3.6 3.7 3.5 3.6 3.3 4.1 2009 4.8 3.9 3.8 - 3.3 4.1 3.6 3.8 3.4 3.3 2.8 4.1 2010 4.4 4.1 3.1 - 3.1 3.9 3.6 3.6 3.1 3.6 3.3 3.6 2014 5.0 5.0 4.0 5.0 4.0 5.0 4.0 4.0 5.0 4.0 5.0 5.0 2015 4.6 4.2 3.7 4.1 3.7 4.4 3.5 3.8 3.4 3.6 3.3 4.2
5.2.1.4 EMPLOYER SURVEY The responses to question regarding the assessment of the program outcomes in the
Employer Survey (Table 5.14) indicated satisfaction in all areas of the training.
141
Table 5.14 Employer Survey of Importance and Level of Satisfaction with Preparation in the Outcome Skills (2009-2015)
Outcome Importance Level of Satisfaction
A. Apply mathematics, science and engineering principles 4.9 4.9
B. Design and conduct experiments and interpret data 4.7 4.7
C. Design a system, component, or process to meet desired needs 4.5 4.5
D. Understand structure-property-processing relationships in metallic materials 4.5 4.3
E. Function on multidisciplinary teams 4.9 4.8
F. Identify, formulate, and solve engineering problems 4.6 4.4
G. Understand professional and ethical responsibility 4.9 4.8
H. Communicate effectively 4.1 4.2
I. Understand the impact of engineering solutions in a global context 4.2 4.2
J. Recognize the need for and to engage in life-long learning 4.2 4.2
K. Know contemporary issues 4.6 4.6
L. Use the techniques, skills, and modern engineering tools necessary for engineering practice 4.4 4.4
5.2.1.5 EXIT INTERVIEWS The responses to question regarding the assessment of the program outcomes in the
Employer Survey (Table 5.15 5.16 and 5.17) indicated satisfaction in all areas of the training.
Table 5.15 Assessment of Outcomes (Scale of 1-5), Ratio of Importance in Career to How Well the Department Prepared You
2009/10 2010/11 2011/12 2013/14 2014/15 All Years
142
imp. prep. imp. prep. imp. prep. imp. prep. imp. prep. imp. prep. Outcome A 4 4 4 4 4.8 4.4 5 4 5.0 4.8 4.7 4.4 Outcome B 4.5 4 5 3 3.6 4 5 3 5.0 4.8 4.4 4.1 Outcome C 3.5 4 4 3 4 3.8 4 3 4.8 4.0 4.2 3.8 Outcome D ND ND ND ND ND ND 5 5 4.8 4.3 4.8 4.4 Outcome E 3 4 4 3 4.6 3.4 5 5 5.0 4.8 4.5 4.0 Outcome F 4.5 3.5 5 4 3.8 4 5 4 4.8 3.8 4.4 3.8 Outcome G 3 3 4 4 4.2 2.6 4 3 5.0 4.5 4.2 3.4 Outcome H 4 3.5 5 4 4.4 3.8 5 3 3.8 4.0 4.2 3.8 Outcome I 3 4.5 4 4 2.4 3.4 4 5 4.8 4.5 3.5 4.1 Outcome J 4 4 4 4 3.8 3.8 5 5 4.8 4.5 4.2 4.2 Outcome K 3.5 3.5 5 4 3.2 3.4 5 4 5.0 4.3 4.1 3.8 Outcome L 4 5 4 4 4 3.8 5 4 4.8 4.8 4.3 4.1
*No senior exit interviews were done in 2012/13.
ND- No data available
Table 5.16 Course Assessments from Exit Interviews (Scale of 1 to 5)
2009-2015
REQUIRED COURSES MET E 1610 Introduction to Extractive Metallurgy 3.9 MET E 1620 Introduction to Physical Metallurgy 4.2 MET E 3070 Statistical Methods in Earth Sci & Eng 4.0 MET E 3220 Material and Energy Balances 3.9 MET E 3500 Fluid Flow 3.1 MET E 3530 Experimental Techniques in Metallurgy 3.9 MET E 3620 Thermodynamics and Phase Equilibria 4.2 MET E 5260 Physical Metallurgy I 3.9 MET E 5450 Mechanical Metallurgy 4.0 MET E 5670 Mineral Processing I 2.9 MET E 5680 Mineral Processing II 3.1 MET E 5690 Process Engineering Statistics 4.0 MET E 5700 Hydrometallurgy 3.5 MET E 5710 High Temperature Chemical Processing 3.5 MET E 5750 Rate Processes 4.0 MET E 5760 Process Synthesis, Design & Econ 3.6 MET E 5780 Metals Processing 4.0 MET E 5830 Senior Project 3.9
ELECTIVE COURSES MET E 5210 Nuclear Materials 3.8 MET E 5240 Transmission Electron Microscopy 3 MET E 5270 Powder Metallurgy 4 MET E 5280 Magnetic Materials & Devices
143
MET E 5290 Nanoscience and Technology 4.2 MET E 5300 Alloy & Material Design 5 MET E 5600 Corrosion Fundamentals 2 MET E 5660 Surfaces and Interfaces MET E 5800 Special Topics in Metallurgical Eng (i) Industrial Internship (ii) Other-Specify
*New course
Table 5.17 Satisfaction with the Department
On a scale of 1 to 5
2009/10 4 2010/11 4 2011/12 4.5 2012/13 ND 2013/14 4 2014/2015 4.8 Mean (2009–2014) Normalized to number of respondents
4.4
144
5.2.2 Assessment Summary Course Management Survey input was obtained from the faculty for each departmental
course. For quantitative assessment, contribution to each of the outcomes (A to L) by each course is assigned by the instructor on a scale of 0 to 6. The total contribution to each outcome from all the courses is obtained by adding all these units, weighted for credit-hour assignment of each of the courses and the total units assigned for the outcomes by the instructor of each course. Results of the survey are shown in Tables 5.2 to 5.6. The survey and its assessment indicate that the curriculum is resulting in the outcomes expected from the program.
Course evaluations are used to constantly assess and improve the individual courses. The Department Chair monitors these evaluations and communicates to the faculty whenever any specific changes are needed. The average ratings of for satisfaction with respect to various outcomes are above 5 on a scale of 1 to 6 as shown in Tables 5.7, 5.8 and 5.9.
Alumni, Advisory Committee, employer, and senior exit surveys provided qualitative inputs on satisfaction with the program offerings, quantitative inputs regarding the program outcomes, and the needed improvements to the program. All of these surveys indicate a high level of satisfaction regarding the nature of curriculum and the performance of the graduates in industry.
The alumni survey indicated assessment scores in the range of 3.4 to 5.0 for various program outcomes on a scale of 1 to 5, with 5 indicating maximum satisfaction and 1 indicating least satisfaction. The alumni assessment of courses offered by the department indicates satis-faction with ratings in the range of 3.0 to 4.6 on a scale of 1 to 5. Many of the suggested changes or improvements to existing courses or new courses were already in place by the time of the survey. (See Tables 5.10 to 5.13.)
Employer surveys gave assessment scores in the range 3.5 to 5 and average 4.25 over various outcomes (Table 5.14).
The exit interviews indicated an overall satisfaction with the program offerings (4 to 4.5, on a scale of 1 to 5) (Tables 5.15-5.17). The exit interview assessments of core courses offered by the department indicate satisfaction with ratings in the range of 2.5 to 3.7 on a scale of 1 to 5. All the graduates of the program have found gainful employment. The curriculum has been constantly changed so that many of the suggestions in general have already been implemented.
The assessment of the department for undergraduate and graduate education by the graduate council in 2010 was excellent.
The instructors of the department’s courses are very experienced educators and highly accomplished researchers. The averages of course evaluations and the instructor ratings are very high in general, 5.32 and 5.24 respectively, on a scale of 1 to 6. Many of the courses are well established, and continuously updated and enhanced, providing the students the best educational experience. Overall the students express satisfaction with the curriculum, and any concerns expressed by students are addressed as appropriate. Any changes made in the curriculum and methods of instruction affecting various outcomes are addressed for each outcome, as summarized in Figures 5.2 and 5.3.
146
Table 5.18 Graduate Degree Completion/Attrition Data, Department of Metallurgical Engineering 2009-2016
Entering Student Cohort
Academic Year
Students admitted to
master’s program
Students admitted to
doctoral program
Students who changed to
doctoral without
completing masters
Students who changed to
masters without
completing doctoral
Students who left before completing
master’s degree
Students who completed master’s degree
Students who left before completing
doctoral degree
Students who completed doctoral degree
Average time to complete
master’s degree (years)
Average time to complete
doctoral degree (years)
Students remaining in
graduate programs
2009-10 7 13 2 2 0 7 0 13 3.14 4.1 0
2010-11 3 10 0 5 1 7 0 5 2.91 3.67 0
2011-12 4 10 2 3 0 5 1 6 2.47 3.83 2
2012-13 10 14 0 2 2 10 1 3 2.53 3.33 8
2013-14 5 10 0 0 2 2 1 2 2.5 3.0 8
2014-15 5 10 0 1 0 1 0 0 1.0 – 14
2015-16 7 9 0 2 1 0 1 0 – – 14
147
5.4 Employment All of the undergraduate students graduated so far have found good employment within
about three months of graduation with the current national average starting salary of over $57,000/year. Local companies in Utah hiring our graduates include Kennecott Copper, ASARCO, US Magnesium Corporation of America, Western Zirconium, ATK Launch Systems, Intel-Micron Flash Technologies, and other small companies located around the Salt Lake City area. In Table 5.19, statistics of undergraduate students with the degree and the year of graduation as well as the initial or current place of employment are provided. All of the graduate students have successfully found gainful employment in industry, government, or faculty/postdoctoral positions in the US or in their home countries; see Table 5.20.
5.4.1 Undergraduate Student Employment
Table 5.19 Initial or Current Employment or Placement of Bachelor’s Degree Graduates
Student Year
Graduated Initial or Current Employment or Placement
Carlson, Nathan Edward 2010 Boart Longyear
Helsten, Tyler Jason 2010 University of Utah Graduate School
Marshall, Megan Jane 2010 Rio Tinto, Salt Lake City
Tucker, Tyler Keith 2010 Lisbon Valley Mining Co., La Sal, Utah
Lefler, Michael Don 2011 FLSmidth
Ludwig, Matthew Craig 2011 Freeport McMoran
McAllister, Justin Paul 2011 Rio Tinto, South Jordan, Utah
Morrison, Ryan Cannon 2011 ATI Allegheny-Ludlum
Randall, Brent Ronald 2011 FLSmidth
Taylor, David Allen 2011 Proc. Eng. Res., Salt Lake City, Utah
Burak, Adam Joseph 2012 Univ. of Utah Metallurgical Engg. graduate program
Crossman, Randall Joseph 2012 Rio Tinto (T&I)
Derrick, Alexander T 2012 MS 2016, FLSmidth, Salt Lake City, Utah
Hardin, Neal David 2012 California Steel Industries,Rancho Cucamonga, CA
Henline, Colton 2012 Edwards Lifesciences
Jurovitzki, Abraham Leizer 2012 MS 2015. Commercial Metals Company, Texas
Randall, Danielle 2012 American Prep. Acad., Utah
148
Student Year
Graduated Initial or Current Employment or Placement
Zerai, Yousef Mahmoud 2012 Kuwait
Howell, Brady James 2013 ______________,Clinton, Utah
Khorsheed, Hussain Abbas 2013 Kuwait
Wilson, Blaine E. 2013 Robinson Nevada Mining Co., Ruth, Nevada
Dunstan, Matthew Kirk 2014 Univ. of Utah Metallurgical Engg. graduate program
Horvath, David Christopher 2014 Univ. of Utah Metallurgical Engg. graduate program
Khajah, Ahmad Baqer 2014 Kuwait
Schang, Kari Loraine 2014 Alcoa, Davenport, Iowa
Alnaser, Husain FFHS 2015 Univ. of Utah Metallurgical Engg. graduate program
Anglesey, Brandon Cloyde 2015 Univ. of Utah Metallurgical Engg. graduate program
Azbill, Daniel David 2015 To join BYU Graduate School
Colburn, Kevin David 2015 Univ. of Utah Business School
Lefler, Hyrum David 2015 Univ. of Utah Metallurgical Engg. graduate program
Nakhee, Ali A. 2015 Kuwait
Rou, Somnaang 2015 Univ. of Utah Metallurgical Engg. graduate program
Thompson, Benjamin Clyde 2015 Hill Airforce Base, Ogden, Utah
Allred, Colton Ryan 2016
Alnajjar, Nora Walid 2016 University of Utah Metallurgical Engg. MS program
Ganbat, Tuvshinbat 2016 Rio Tinto, Mangolia
Gonzalez, Mario Alberto 2016 Univ. of Utah Metallurgical Engg. MS program
Jamieson, Andrew Scott 2016 University of Virginia Graduate School
Kergaye, Omar Sami 2016 Univ. of Utah Metallurgical Engg. MS program
Lark, Alexander Raymond 2016 Univ. of Utah Metallurgical Engg. MS program
Laroche, Richard Andrew 2016 Univ. of Utah Metallurgical Engg. MS program
Marshall, Urian Spencer 2016 Farmington, Utah
Tsogdelger, Chimedyudon 2016 Rio Tinto, Mangolia
Wendel, Jared Steven 2016 Brahma Construction, Refractory Division
149
Student Year
Graduated Initial or Current Employment or Placement
Willhard, Travis Paul 2016 Univ. of Utah Metallurgical Engg. MS program
5.4.2 Graduate Student Employment
Table 5.20 Initial or Current Employment or Placement of Master’s or Doctoral Degree Graduates
Student Year
Graduated Degree Advisor Initial or Current Employment or Placement
Choi, Jin Won 2009 PhD Sohn Korean Air Force
Dyussekenov, Nurzhan
2009 MS Sohn Indotech?, Salt Lake City Astana, Kazakhstam
Gupta, Priyank 2009 MS Moats India
Khouraibchia, Youness
2009 MS Moats Freeport McMoRan
Mahapatra, Amrita 2009 MS Miller FLSmidth, Salt Lake City
Paruchuri, Vamsi K 2009 PhD Miller IBM Research @ Albany Nanotech, Albany, NY
Saurabh, Swadhin 2009 MS Rajamani FLSmidth
Wang, Jei-Pil 2009 PhD Cho Pukyong National University in Busan, Korea
Butler, Brady G 2010 MS Fang US Army Research Laboratory, Maryland
Choi, Young Joon 2010 PhD Sohn Global Foundries, Clifton Park. NY
Choi, Moo Eob 2010 PhD Sohn POSCO, S. Korea
Garside, Gavin J 2010 PhD Guruswamy SPACEX Corporation, Los Angeles
Goneguntla, Harini Naidu
2010 MS* Rajamani James Hardie, Fontana, California
Zhang, Haibo 2010 PhD Fang Megadiomond, Orem, Utah
Kodali, Phanindra 2010 MS Miller Mineral Park Mine, Kingman. AZ
Pinegar, Haruka Kimura
2010 MS Sohn Rio Tinto, SLC, Utah
Sarswat, Prashant K 2010 2012
MS PhD
Free University of Utah, Metallurgical Engineering research faculty
150
Student Year
Graduated Degree Advisor Initial or Current Employment or Placement
Shitole, Shamita Anil 2010 MS Free University of Utah MSE
Tuzcu, E. Tugcan 2010 PhD Rajamani DAMA Engineering, Head of Mining & Metallurgy Dept., Ankara, Turkey
Wang, Hongtao 2010 PhD Fang Engineer/Scientist, Kennametal, Rogers. Arkansas
Warner, Nathan T 2010 MS Free IM Flash Technologies, Lehi, Utah
Xu, Wenjing 2010 MS Miller Unknown
Alkac, Dilek 2011 PhD Rajamani Metso Minerals, Colorado Springs. Colorado
Chang, Paul N. 2011 PhD Chandran Advanced Ceramic Corporation, Arizona
Gao, Yubo 2011 MS Sohn ______.Salt Lake City, Utah
Guo, Jun 2011 PhD Fang Federal Carbide, Tyrone, PA
Gupta, Vishal 2011 PhD Miller EP Minerals, Nevada
Hwang, Su Hyun 2011 MS Sohn
Kumar, Vineet 2011 PhD Fang Kennametal, Latrobe. Pennsylvania
Liu, Sarah 2011 MS Sohn Arcelor Mittal, East Chicago. Indiana
Phipps, Tim Aaron 2011 ME Moats Westec, Salt Lake City, Utah
Sarma, Biplab 2011 PhD Chandran Shaw Nap Tech, Utah
Thimmegowda, Deepak
2011 PhD Guruswamy Intel-Micron, Fremont. California
Wampler, Heather A 2011 ME Moats _________Albuquerque. New Mexico
Wang, Haitao 2011 PhD Sohn Heavystone LLC, SLC, Utah
Bagri, Prashant 2012 MS Moats University of Utah Metallurgical Engineering PhD program
Elnathan, Francis 2012 PhD Moats Freeport McMoran
Hsieh, Ching-Hao ‘Ken’
2012 MS Miller Swiss Ray
Janwong, Adirek 2012 PhD Moats Electrometals
Kar, Soumya 2012 PhD Free Intel Corp., Hillsboro. OR
Marino, Sandro L 2012 MS Miller Interfusao, Sao Paulo SP, Brazil
151
Student Year
Graduated Degree Advisor Initial or Current Employment or Placement
Medina, Juan Francisco
2012 PhD Miller CiDRA Minerals Processing, Wallingford, Connecticut
Opara, Aleksandra 2010 2012
MS* PhD*
Miller Adams
Indotech?, Salt Lake City
Ramanathan, Meenakshisundaram
2012 PhD Guruswamy Intel Corp., Portland, Oregon
Ren, Chai 2012 PhD Guruswamy Univ. of Utah Metallurgical Engg. Postdoc
Saha, Biswadeep 2012 PhD Guruswamy Intel Corp., Portland, Oregon
Vethosodsakda, Thien
2012 MS Free Freeport McMoran, Safford, Arizona
Yin, Xihui 2012 PhD Miller Kemira, Brookhaven, Georgia
Bhattacharyya, Dhiman
2013 2016
MS PhD
Miller Misra
Intel, Portland, Oregon
Chitta, Pallavi 2013 PhD Guruswamy Ceramatec
Dhawan, Nikhil 2013 PhD Rajamani Assistant Professor, Indian Institute of Technology – Roorkee, Uttarakhand State, India
Emami, Samar 2013 PhD Sohn USG, Libertyville, Illinois
Harding, David P 2013 PhD Fang Diamicron, Orem, Utah
Ilunga Tshibind, Alex
2013 MS Misra Freeport McMoran Inc., Safford, Arizona
Jagannathan, Madhusudan
2010 2013
MS PhD
Chandran Chandran
IM Flash Technologies, Lehi, Utah
Kim, Younghwan 2013 MS Misra Tech Holdings, Salt Lake City
Liu, Bo 2013 MS Fang Argonne National Lab.
Mejia, Joel Alejandro 2013 MS Miller Unknown-, Morgantown, West Virginia
Mohassab Ahmed, Mohassab Yousef
2011 2013
MS PhD
Sohn Sohn
University of Utah, Metallurgical Engineering postdoc
Olivas-Martinez, Miguel
2013 PhD Sohn US Steel Corp., Pittsburgh, Pennsylvania
Pan, Bo 2013 MS Miller Unknown, Columbia, Maryland
152
Student Year
Graduated Degree Advisor Initial or Current Employment or Placement
Safarzadeh, M Sadegh
2013 PhD Moats South Dakota School of Mines & Technology, Rapid City SD
Sarkhosh, Tooba 2013 MS Rajamani/ Misra
Princeton University, New Jersey
Shukla, Abhijeet 2013 MS Free Intel, Portland, Oregon
Singh, Rahul 2013 ME Rajamani Freeport McMoRan, Phoenix, Arizona
Yuan, Zhixue 2013 MS Sohn Hazelett Strip-Casting Corporation, Colchester, Vermont
Zhu, Liangzhu 2013 PhD Sohn Univ. of Utah, SLC, Utah
Chambers, Amy Jo 2014 MS Moats Simplot, Pocatello, Idaho
Crossman, Raquel 2014 MS Miller Freeport McMoran, Arizona
Li, Jingzhu 2014 MS Fang NOV,The Woodlands, Texas
Middlemas, Scott C. 2014 2009
PhD BS
Fang US Army Research Laboratory, Aberdeen Proving Ground, Maryland
Neff, Jason Lee 2014 MS Guruswamy IHC, Washington, Utah
Peoples, Michael J 2014 MS Miller Univ. of Utah Metallurgical Engg.
Rashidi, Samira 2014 PhD Rajamani ThyssenKrupp Industrial Solutions (USA), Inc., Atlanta, Georgia
Robison, Mark R. 2014 MS Free U.S. Air Force, Clearfield, UT
Smith, York Reed 2014 PhD Misra Univ. of Utah Metallurgical Engg. faculty
Tahvilian, Leila 2014 PhD Fang Ford Motor Co., Michigan
Wang, Zuoxing 2014 MS Miller Unknow, Salt Lake City, Utah
Yao, Xian 2014 PhD Fang RDM, LLC, Draper, Utah
Zhang, Xia 2014 PhD Miller Freeport McMoran, Morenci, Arizona
Bhattacharyya, Anirban
2014 MS Rajamani Intel, Portland OR
Bronson, Tyler M. 2015 PhD Sohn Los Alamos National Lab, Los Alamos, New Mexico
Gu, Lin 2015 MS Fang China Offshore Oil Co.
153
Student Year
Graduated Degree Advisor Initial or Current Employment or Placement
Jurovitzki, Abraham 2015 2012
MS BS Simpson Commercial Metals Company (CMC Texas), Texas
Liu, Jing 2015 PhD Miller Robinson Mine, Ely, Nevada
Luo, Xiangyi 2015 PhD Fang Argonne National Lab.
Paramore, James D 2015 PhD Fang Orise, Fellow, United States Army Research Laboratory, Aberdeen Proving Ground, Maryland
Sun, Pei 2015 PhD Fang University of Utah Metallurgical Engineering Research Assoc.
Tserendagva, Tsend-Ayush
2015 PhD Miller Cytec, Stamford, Connecticut
Wahbah, Eman 2015 MS Misra University of Utah, Metallurgical Engineering graduate program
Yang, Lu 2015 MS Fang University of Utah Metallurgical Engineering, Research Assistant
Zhou, Chengshang 2015 PhD Fang University of Utah, Post-docoral Associate
Zhu, Yakun 2013 2015
MS PhD
Free Ohio State University, Columbus, Ohio
Appusamy, Kanagasundar
2016 PhD Guruswamy Intel, Portland, Oregon
Bhattacharyya, Dhiman
2016 PhD Misra Intel, Portland, Oregon
Derrick, Alexander 2016 2012
MS BS
Free FLSmidth, Salt Lake City, Utah
Dholu, Nakul 2016 MS Rajamani Freeport McMoRan Technology Center, Phoenix, Arizona
Feng, Haidong 2016 MS Miskovic ___________Salt Lake City Utah
Jin, Jiaqi 2016 PhD Miller Barrick Gold,
Rappleye, Devin 2016 PhD Simpson Lawrence Livermore National Laboratory, California
Wang, Yan 2016 PhD Miller Postdoc, Univ. of Utah