Post on 10-Apr-2020
2.1.10floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
®
alpina and alpina multiblock
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 1
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.10
alpina and alpina multiblock
Fully vitrified floor tiles in a matt finish, the Alpina range is available
in two colours (Gris and Beige) and in a variety of sizes and shapes.
Shading is an inherent part of design. Matching staircase pieces are
also available.
Typical applications
Alpina is part of the Ston-Ker range of rectified, homogeneous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R10, when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 40 and 47 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
alpina gris alpina beige
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 2
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
®
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Alpina Gris 440 x 660 10.0 23.7 112 V5621000
Block Alpina Gris 109 x 660 10.0 23.3 115 V5090100
145 x 660 10.0 23.4 115 V5120100
219 x 660 10.0 23.2 115 V5210100
Alpina Beige 440 x 660 10.0 23.7 112 V5621001
Block Alpina Beige 109 x 660 10.0 23.3 115 V5090101
145 x 660 10.0 23.4 115 V5120101
219 x 660 10.0 23.2 115 V5210101
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.13%,
thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
2.1.10
alpina and alpina multiblock
Wal
l: m
ult
iblo
ckal
pin
a b
eige
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 3
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Alpina Gris a 350 x 440 10.0 26.5 141 V7380700
Huella Alpina Beige a 350 x 440 10.0 26.5 141 V7380701
Huella Esq. RH Alpina Gris b 350 x 454 10.0 - 142 V7340700
Huella Esq. RH Alpina Beige b 350 x 454 10.0 - 142 V7340701
Huella Esq. LH Alpina Gris b 350 x 454 10.0 - 142 V7340710
Huella Esq. LH Alpina Beige b 350 x 454 10.0 - 142 V7340711
Zanquin RH Alpina Gris c 100 x 440 11.0 20.8 130 V7071030
Zanquin RH Alpina Beige c 100 x 440 11.0 20.8 130 V7071031
Zanquin LH Alpina Gris c 100 x 440 10.0 20.8 130 V7071530
Zanquin LH Alpina Beige c 100 x 440 10.0 20.8 130 V7071531
Zocalo Alpina Gris d 100 x 440 10.0 24.8 18 V7070130
Zocalo Alpina Beige d 100 x 440 10.0 24.8 18 V7070131
Peldano Tecn. Alpina Gris f 316 x 660 25.0 59.4 146 V7490100
Peldano Tecn. Alpina Beige f 316 x 660 25.0 59.4 146 V7490101
2.1.10
alpina and alpina multiblock
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2,
size +/– 0.16 to 0.30%, thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to
Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
This
pag
e: a
lpin
a gr
isFr
on
tco
ver:
alp
ina
bei
ge
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 4
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.11
assur
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 5
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.11
assur
Fully vitrified floor tiles in a matt finish, the Assur range is available in
two colours (Pulpis and Dune). Matching staircase pieces are also
available.
Typical applications
Assur is part of the Ston-Ker range of rectified, homogeneous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R9, when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 48 and 49 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
assur pulpis assur dune
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 6
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.11
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Assur Pulpis 440 x 660 10.0 23.7 112 V5621201
Assur Dune 440 x 660 10.0 23.7 112 V5621202
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
assu
r d
une
assur
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 7
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.11
assur
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2,
size +/– 0.16 to 0.30%, thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to
Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Assur Pulpis a 350 x 440 10.0 26.5 141 V7381301
Huella Assur Dune a 350 x 440 10.0 26.5 141 V7381302
Huella Esq. RH Assur Pulpis b 350 x 454 10.0 28.8 142 V7341301
Huella Esq. RH Assur Dune b 350 x 454 10.0 28.8 142 V7341302
Huella Esq. LH Assur Pulp b 350 x 454 10.0 28.8 142 V7341311
Huella Esq. LH Assur Dune b 350 x 454 10.0 28.8 142 V7341312
Zanquin RH Assur Pulpis c 100 x 440 10.0 18.8 130 V7071041
Zanquin RH Assur Dune c 100 x 440 10.0 18.8 130 V7071042
Zanquin LH Assur Pulpis d 100 x 440 10.0 18.8 130 V7071541
Zanquin LH Assur Dune d 100 x 440 10.0 18.8 130 V7071542
Zocalo Assur Pulpis d 100 x 440 10.0 22.7 18 V7070141
Zocalo Assur Dune d 100 x 440 10.0 22.7 18 V7070142
Peldano Tecnico Assur Pulpis f 316 x 660 25.0 59.4 146 V7490801
Peldano Tecnico Assur Dune f 316 x 660 25.0 59.4 146 V7490802
This
pag
e: a
ssu
r p
ulp
isFr
ont
cove
r: a
ssu
r p
ulp
is
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 8
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.12
carpatia, carpatia multiblock and carpatia antislip
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 9
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.12
carpatia, carpatia multiblock and carpatia antislip
Fully vitrified floor tiles in a matt finish, the Carpatia range is available
in three colours (Gris, Beige and Negro) and in a variety of sizes and
shapes. Shading is an inherent part of the design. Matching staircase
pieces are also available. Carpatia is also available with an antislip
finish.
Typical applications
Carpatia is part of the Ston-Ker range of rectified, homogeneous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R10 (R12 for Carpatia Antislip),
when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 42 and 47 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
carpatia gris carpatia beige
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 10
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.12
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Carpatia Gris 330 x 330 10.8 24.5 104 V5300300
330 x 660 10.8 21.3 110 V5600100
Block Carpatia Gris 81 x 660 10.8 21.8 115 V5080300
108 x 660 10.8 22.0 115 V5180300
164 x 660 10.8 21.6 115 V5160300
Carpatia Beige 330 x 330 10.8 24.5 104 V5300300
330 x 660 10.8 21.3 110 V5600101
Block Carpatia Beige 81 x 660 10.8 21.8 115 V5080301
108 x 660 10.8 22.0 115 V5180301
164 x 660 10.8 21.6 115 V5160301
Carpatia Negro 330 x 330 10.8 24.5 104 V5300302
330 x 660 10.8 21.3 110 V5600102
Block Carpatia Negro 81 x 660 10.8 21.8 115 V5080302
108 x 660 10.8 22.0 115 V5180302
164 x 660 10.8 21.6 115 V5160302
Carpatia Gris Antislip 330 x 330 10.8 20.5 107 V5300400
330 x 660 10.8 21.3 112 V5600200
Carpatia Negro Antislip 330 x 330 10.8 20.5 107 V5300402
330 x 660 10.8 21.3 112 V5600202
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information
carpatia, carpatia multiblock and carpatia antislip
carpatia negro
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 11
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.12
carpatia, carpatia multiblock and carpatia antislip
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Carpatia Gris a 330 x 347 10.8 27.6 140 V7250100
Huella Carpatia Beige a 330 x 347 10.8 27.6 140 V7250101
Huella Carpatia Negro a 330 x 347 10.8 27.6 140 V7250102
Huella Carpatia Gris Antislip a 330 x 347 10.8 27.6 140 V7250200
Huella Carpatia Negro Antislip a 330 x 347 10.8 27.6 140 V7250202
Huella Esq. Carpatia Gris b 347 x 347 10.8 29.6 145 V7270100
Huella Esq. Carpatia Beige b 347 x 347 10.8 29.6 145 V7270101
Huella Esq. Carpatia Negro b 347 x 347 10.8 29.6 145 V7270102
Huella Esq. Carpat. Gris Ant. b 347 x 347 10.8 29.6 145 V7270200
Huella Esq. Carpat. Negro Ant. b 347 x 347 10.8 29.6 145 V7270202
Zanquin RH Carpatia Gris c 108 x 330 10.8 23.3 20 V70811001
Zanquin RH Carpatia Beige c 108 x 330 10.8 23.3 20 V70811011
Zanquin RH Carpatia Negro c 108 x 330 10.8 23.3 20 V70811021
Zanquin LH Carpatia Gris c 108 x 330 10.8 23.3 20 V70816001
Zanquin LH Carpatia Beige c 108 x 330 10.8 23.3 20 V70816011
Zanquin LH Carpatia Negro c 108 x 330 10.8 23.3 20 V70815021
Zocalo Carpatia Gris d 108 x 330 10.8 21.2 17 V7080200
Zocalo Carpatia Beige d 108 x 330 10.8 21.2 17 V7080201
Zocalo Carpatia Negro d 108 x 330 10.8 21.2 17 V7080202
Peldano Tecn. Carpatia Gris f 316 x 660 26.0 62.7 146 V7550100
Peldano Tecn. Carpat. Beige f 316 x 660 26.0 62.7 146 V7550101
Peldano Tecn. Carpat. Negro f 316 x 660 26.0 62.7 146 V7550102
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2,
size +/– 0.16 to 0.30%, thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to
Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
This
pag
e: c
arp
atia
bei
ge F
ron
tco
ver:
wal
l- m
ult
iblo
ckca
rpat
ia n
egro
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 12
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
®
caucaso, caucaso multiblock and caucaso antislip
2.1.13
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 13
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.13
caucaso, caucaso multiblock and caucaso anti-slip
caucaso blanco caucaso beige
Fully vitrified floor tiles in a matt finish, the Caucaso range is available
in five colours (Blanco, Beige, Rojo, Verde and Negro) and in a variety of
sizes and shapes. Shading is an inherent part of the design. Matching
staircase pieces are also available. Caucaso is also available with an
antislip finish.
Typical applications
Caucaso is part of the Ston-Ker range of rectified, homogeneous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R9 (R12 for Caucaso Antislip), when
tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 41 and 46 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 14
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
®
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Caucaso Blanco 440 x 440 11.0 21.4 109 V5400100
440 x 660 11.0 23.7 112 V5620100
Block Caucaso Blanco 109 x 660 10.2 23.3 115 V5090200
145 x 660 10.2 23.4 115 V5120200
219 x 660 11.0 23.2 115 V5210200
Caucaso Beige 440 x 440 11.0 21.4 109 V5400101
440 x 660 11.0 23.7 112 V5620101
Block Caucaso Beige 109 x 660 10.2 23.3 115 V5090201
145 x 660 11.0 23.4 115 V5120201
219 x 660 11.0 23.2 115 V5210201
Caucaso Rojo 440 x 440 11.0 21.4 109 V5400102
440 x 660 11.0 23.7 112 V5620102
Block Caucaso Rojo 109 x 660 10.2 23.3 115 V5090202
145 x 660 11.0 23.4 115 V5120202
219 x 660 11.0 23.2 115 V5210202
Caucaso Verde 440 x 440 11.0 21.4 109 V5400103
440 x 660 11.0 23.7 112 V5620103
Block Caucaso Verde 109 x 660 10.2 23.3 115 V5090203
145 x 660 11.0 23.4 115 V5120203
219 x 660 11.0 23.2 115 V5210203
Caucaso Negro 440 x 440 11.0 21.4 109 V5400104
440 x 660 11.0 23.7 112 V5620104
Block Caucaso Negro 109 x 660 10.2 23.3 115 V5090204
145 x 660 11.0 23.4 115 V5120204
219 x 660 11.0 23.2 115 V5210204
Caucaso Rojo Antislip 440 x 440 11.0 21.4 112 V5400802
440 x 660 11.0 23.7 113 V5620702
Caucaso Verde Antislip 440 x 440 11.0 21.4 112 V5400803
440 x 660 11.0 23.7 113 V5620703
Caucaso Negro Antislip 440 x 440 11.0 21.4 112 V5400804
440 x 660 11.0 23.7 113 V5620704
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information
2.1.13
caucaso verde
caucaso negro
caucaso rojo
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 15
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.13
caucaso, caucaso multiblock and caucaso antislip
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Zanquin RH Caucaso Blanco c 100 x 440 11.0 18.8 130 V7071000
Zanquin RH Caucaso Beige c 100 x 440 11.0 18.8 130 V7071001
Zanquin RH Caucaso Rojo c 100 x 440 11.0 18.8 130 V7071002
Zanquin RH Caucaso Verde c 100 x 440 11.0 18.8 130 V7071003
Zanquin RH Caucaso Negro c 100 x 440 11.0 18.8 130 V7071004
Zanquin LH Caucaso Blanco c 100 x 440 11.0 18.8 130 V7071500
Zanquin LH Caucaso Beige c 100 x 440 11.0 18.8 130 V7071501
Zanquin LH Caucaso Rojo c 100 x 440 11.0 18.8 130 V7071502
Zanquin LH Caucaso Verde c 100 x 440 11.0 18.8 130 V7071503
Zanquin LH Caucaso Negro c 100 x 440 11.0 18.8 130 V7071504
Zocalo Caucaso Blanco d 100 x 440 11.0 22.7 18 V7070100
Zocalo Caucaso Beige d 100 x 440 11.0 22.7 18 V7070101
Zocalo Caucaso Rojo d 100 x 440 11.0 22.7 18 V7070102
Zocalo Caucaso Verde d 100 x 440 11.0 22.7 18 V7070103
Zocalo Caucaso Negro d 100 x 440 11.0 22.7 18 V7070104
Peld. Tecn. Caucaso Blanco f 316 x 660 25.8 59.4 146 V7490200
Peld. Tecn. Caucaso Beige f 316 x 660 25.8 59.4 146 V7490201
Peld. Tecn. Caucaso Rojo f 316 x 660 25.8 59.4 146 V7490202
Peld. Tecn. Caucaso Verde f 316 x 660 25.8 59.4 146 V7490203
Peld. Tecn. Caucaso Negro f 316 x 660 25.8 59.4 146 V7490204
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Caucaso Blanco a 350 x 440 11.0 26.5 141 V7380100
Huella Caucaso Beige a 350 x 440 11.0 26.5 141 V7380101
Huella Caucaso Rojo a 350 x 440 11.0 26.5 141 V7380102
Huella Caucaso Verde a 350 x 440 11.0 26.5 141 V7380103
Huella Caucaso Negro a 350 x 440 11.0 26.5 141 V7380104
Huel. Caucaso Rojo Anti. a 350 x 440 11.0 26.5 141 V7380202
Huel. Caucaso Verde Anti. a 350 x 440 11.0 26.5 141 V7380203
Huel. Caucaso Negro Anti. a 350 x 440 11.0 26.5 141 V7380204
Huel. Esq. RH Caucaso Blanco b 350 x 454 11.0 - 142 V7340100
Huel. Esq. RH Caucaso Beige b 350 x 454 11.0 - 142 V7340101
Huel. Esq. RH Caucaso Rojo b 350 x 454 11.0 - 142 V7340102
Huel. Esq. RH Caucaso Verde b 350 x 454 11.0 - 142 V7340103
Huel. Esq. RH Caucaso Negro b 350 x 454 11.0 - 142 V7340104
Huel. Esq. LH Caucaso Blanco b 350 x 454 11.0 - 142 V7340110
Huel. Esq. LH Caucaso Beige b 350 x 454 11.0 - 142 V7340111
Huel. Esq. LH Caucaso Rojo b 350 x 454 11.0 - 142 V7340112
Huel. Esq. LH Caucaso Verde b 350 x 454 11.0 - 142 V7340113
Huel. Esq. LH Caucaso Negro b 350 x 454 11.0 - 142 V7340114
H. Esq. RH Cauc. Rojo Anti. b 350 x 454 11.0 - 142 V7340202
H. Esq. RH Cauc. Verde Anti. b 350 x 454 11.0 - 142 V7340203
H. Esq. RH Cauc. Negro Anti. b 350 x 454 11.0 - 142 V7340204
H. Esq. LH Cauc. Rojo Anti. b 350 x 454 11.0 - 142 V7340212
H. Esq. LH Cauc. Verde Anti. b 350 x 454 11.0 - 142 V7340213
H. Esq. LH Cauc. Negro Anti. b 350 x 454 11.0 - 142 V7340214
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2,
size +/– 0.16 to 0.30%, thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to
Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
This
pag
e: c
him
ney
- m
ult
iblo
ckca
uca
so n
egro
Fron
tco
ver:
wal
l- m
ult
iblo
ckca
uca
so n
egro
450.1 Stonker floor tiles cont2 12/4/05 3:12 pm Page 16
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.14
pedralbes
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 17
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.14
pedralbes
pedralbes crema pedralbes pulpis
Fully vitrified floor tiles in a matt finish, the Pedralbes range is available
in three colours (Crema, Pulpis and Gris). Matching staircase pieces are
also available.
Typical applications
Pedralbes Natural is part of the Ston-Ker range of rectified,
homogeneous ceramic tiles which are designed to offer greater
resistance to wear and scratches. A very low water absorption rate and
excellent frost resistance makes them ideally suited for use in internal
and exterior commercial projects including public and shopping areas,
office lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R9, when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 45 and 51 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 18
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.14
Pedralbes dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Pedralbes Crema 145 x 660 10.8 23.3 24 V71201301
440 x 440 10.8 21.4 109 V54015001
440 x 660 10.8 23.7 112 V56215001
Pedralbes Pulpis 145 x 660 10.8 23.3 24 V71201311
440 x 440 10.8 21.4 109 V54015011
440 x 660 10.8 23.7 112 V56215011
Pedralbes Gris 145 x 660 10.8 23.3 24 V71201321
440 x 440 10.8 21.4 109 V54015021
440 x 660 10.8 23.7 112 V56215021
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
pedralbes
pedralbes gris
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 19
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.14
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Pedralbes Crema a 350 x 440 10.8 26.5 141 V738015001
Huella Pedralbes Pulpis a 350 x 440 10.8 26.5 141 V738015011
Huella Pedralbes Gris a 350 x 440 10.8 26.5 141 V738015021
Huel. Esq. RH Pedr. Crema b 350 x 454 10.8 - 142 V734015001
Huel. Esq. RH Pedr. Pulpis b 350 x 454 10.80 - 142 V734015011
Huel. Esq. RH Pedr. Gris b 350 x 454 10.8 - 142 V734015021
Huel. Esq. LH Pedr. Crema b 350 x 454 10.8 - 142 V734015101
Huel. Esq. LH Pedr. Pulpis b 350 x 454 10.8 - 142 V734015111
Huel. Esq. LH Pedr. Gris b 350 x 454 10.8 - 142 V734015121
Zanquin RH Pedralbes Crema c 100 x 440 10.8 18.8 130 V7071020
Zanquin RH Pedralbes Pulpis c 100 x 440 10.8 18.8 130 V7071021
Zanquin RH Pedralbes Gris c 100 x 440 10.8 18.8 130 V7071022
Zanquin LH Pedralbes Crema c 100 x 440 10.8 18.8 130 V7071520
Zanquin LH Pedralbes Pulpis c 100 x 440 10.8 18.8 130 V7071521
Zanquin LH Pedralbes Gris d 100 x 440 10.8 18.8 130 V7071522
Zocalo Pedralbes Crema d 100 x 440 10.8 22.7 18 V7070120
Zocalo Pedralbes Pulpis d 100 x 440 10.8 22.7 18 V7070121
Zocalo Pedralbes Gris d 100 x 440 10.8 22.7 18 V7070122
Peldano Tecnico Pedralbes Crema f 316 x 110 25.8 59.4 147 V75103001
Peldano Tecnico Pedralbes Pulpis f 316 x 110 25.8 59.4 147 V75103011
Peldano Tecnico Pedralbes Gris f 316 x 110 25.8 59.4 147 V75103021
pedralbes
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to
BS EN ISO 10545-2,
size +/– 0.16 to 0.30%,
thickness +/– 4%.
2 Price code refers to price
grouping structure. Refer
to Porcelanosa for more
information.
3 Staircases may also use
Zocalo pieces (d).
4 Risers are cut from main
tiles (e).
*Key to stair pieces
Fron
tco
ver:
ped
ralb
esp
ulp
is
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 20
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.15
via emilia and via emilia antislip
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 21
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.15
via emilia and via emilia antislip
via emilia acero
cenefa regina acero cenefa regina negro
via emilia marfil
Fully vitrified floor tiles in a matt finish, the Via Emilia range is available
in three colours (Acero, Marfil and Negro) and Cenefa and Taco infill
pieces. Matching staircase pieces are also available. Via Emilia is also
available in an antislip finish.
Typical applications
Via Emilia is part of the Ston-Ker range of rectified, homogeneous
ceramic tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R10 (R12 for Via Emilia Antislip),
when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 40 and 50 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 22
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.15
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Via Emilia Acero 440 x 440 11.2 21.4 109 V5401300
Via Emilia Marfil 440 x 440 11.2 21.4 109 V5401301
Via Emilia Negro 440 x 440 11.2 21.4 109 V5401302
Cenefa Regina Acero 108 x 440 11.2 24.7 28 V71601001
Cenefa Regina Negro 108 x 440 11.2 24.7 28 V71601021
Taco Regina Acero 108 x 108 11.2 25.5 23 V72001001
Taco Regina Negro 108 x 108 11.2 25.5 23 V72001021
Via Emilia Acero Antislip 440 x 440 11.2 21.4 112 V5401400
Via Emilia Negro Antislip 440 x 440 11.2 21.4 112 V5401402
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
via emilia and via emilia antislip
via emilia negro
taco regina acero taco regina acero
via
emil
ia a
cero
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 23
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.15
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Via Emilia Acero a 350 x 440 10.8 26.5 141 V7381100
Huella Via Emilia Marfil a 350 x 440 10.8 26.5 141 V7381101
Huella Via Emilia Negro a 350 x 440 10.8 26.5 141 V7381102
Huella Via Emilia Acero Antislip a 350 x 440 10.8 26.5 141 V7381200
Huella Via Emilia Negro Antislip a 350 x 440 10.8 26.5 141 V7381202
Huella Esq. RH Via Emilia Acero b 350 x 454 10.8 28.8 142 V7341100
Huella Esq. RH Via Emilia Marfil b 350 x 454 10.8 28.8 142 V7341101
Huella Esq. RH Via Emilia Negro b 350 x 454 10.8 28.8 142 V7341102
Huella Esq. RH Via Emilia Acero Anti. b 350 x 454 10.8 28.8 142 V7341200
Huella Esq. RH Via Emilia Negro Anti. b 350 x 454 10.8 28.8 142 V7341202
Huella Esq. LH Via Emilia Acero b 350 x 454 10.8 28.8 142 V7341110
Huella Esq. LH Via Emilia Marfil b 350 x 454 10.8 28.8 142 V7341111
Huella Esq. LH Via Emilia Negro b 350 x 454 10.8 28.8 142 V7341112
Huella Esq. LH Via Emilia Acero Anti. b 350 x 454 10.8 28.8 142 V7341210
Huella Esq. LH Via Emilia Negro Anti. b 350 x 454 10.8 28.8 142 V7341212
Zanquin RH Via Emilia Acero c 100 x 440 10.8 18.8 130 V7071035
Zanquin RH Via Emilia Marfil c 100 x 440 10.8 18.8 130 V7071036
Zanquin RH Via Emilia Negro c 100 x 440 10.8 18.8 130 V7071037
Zanquin LH Via Emilia Acero c 100 x 440 10.8 18.8 130 V7071535
Zanquin LH Via Emilia Marfil c 100 x 440 10.8 18.8 130 V7071536
Zanquin LH Via Emilia Negro d 100 x 440 10.8 18.8 130 V7071537
Zocalo Via Emilia Acero d 100 x 440 10.8 22.7 18 V7070135
Zocalo Via Emilia Marfil d 100 x 440 10.8 22.7 18 V7070136
Zocalo Via Emilia Negro d 100 x 440 10.8 22.7 18 V7070137
Peldano Tecnico Via Emilia Acero f 316 x 660 25.8 59.4 146 V7490700
Peldano Tecnico Via Emilia Marfil f 316 x 660 25.8 59.4 146 V7490701
Peldano Tecnico Via Emilia Negro f 316 x 660 25.8 59.4 146 V7490702
via emilia and via emilia antislip
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2, size +/– 0.16 to 0.30%,
thickness +/– 4%.
2 Price code refers to price grouping structure. Refer to Porcelanosa for
more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
This
pag
e: v
ia e
mil
ia m
arfi
lFr
ont
cove
r: v
ia e
mil
ia n
egro
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 24
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.16
yuste and yuste antislip
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 25
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.16
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Yuste Mostaza a 333 x 350 10.2 26.0 140 V7310101
Huella Yuste Most. Antislip a 333 x 350 10.2 26.0 140 V7310201
Huella Esquina Yuste Mostaza b 350 x 350 10.2 29.8 145 V7290101
Huella Esq. Yuste Most. Antislip b 350 x 350 10.2 29.8 145 V7290201
Zanquin RH Yuste Mostaza c 110 x 333 10.2 22.3 20 V7111001
Zanquin LH Yuste Mostaza c 110 x 333 10.2 22.3 20 V7111501
Zocalo Yuste Mostaza d 110 x 333 10.2 22.6 17 V7110101
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2, size
+/– 0.16 to 0.30%, thickness +/– 4%.
2 Price code refers to price grouping structure.
Refer to Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Yuste Mostaza 333 x 333 10.2 22.9 104 V5330101
Yuste Mostaza Antislip 333 x 333 10.2 22.9 107 V5330201
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
yuste and yuste antislip
yuste mostaza
Fully vitrified floor tiles in a matt finish, the Yuste range is available in
one colour (Mostaza). Matching staircase pieces are also available.
Yuste is also available in an antislip finish.
Typical applications
Yuste is part of the Ston-Ker range of rectified, homogeneous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas as well as residential.
They are stain resistant, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R10 (R12 for Yuste Antislip), when
tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 40 and 50 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder).
For full descriptions of tests, dimensional tolerances and other
performance data, please refer to section 5.0 in this binder.
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 26
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.17
altamira, altamira multiblock and altamira antislip
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 27
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.17
altamira, altamira multiblock and altamira antislip
Fully vitrified floor tiles in a matt finish, the Altamira range is available
in three colours (Gris, Marfil and Rojo) and in a variety of sizes and
shapes. Matching staircase pieces are also available. Shading is an
inherent part of design. Altamira is also available with an antislip finish.
Typical applications
Altamira is part of the Ston-Ker range of rectified, homogenous ceramic
tiles which are designed to offer greater resistance to wear and
scratches. A very low water absorption rate and excellent frost
resistance makes them ideally suited for use in internal and exterior
commercial projects including public and shopping areas, office
lobbies, hotels, high-traffic areas and well as residential.
They do not stain, and are easy to clean and maintain.
Key performance data
Slip resistance
Ramp value test achieves a value of R10 (R12 for Altamira Antislip),
when tested to DIN 51130.
Water absorption rate
Less than 0.1%, when tested to BS EN ISO 10545-3.
Modulus of rupture
The main tiles have values of between 40 and 46 when tested to
BS EN ISO 10545-4.
Fixing
Recommended adhesive and grout for this product are made by Butech
(please refer to section 6.0 in this binder.
For full descriptions of tests, dimensional tolerances and other performance data, please refer to section 5.0 in this binder.
altamira gris altamira marfil
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 28
floor tiles
May 05 www.porcelanosa.co.uk technical and samples hotline t: 08702 240245®
® 2.1.17
altamira, altamira multiblock and altamira antislip
altamira rojo
Dimensions and shapes
Description Shape Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m3
) code code
Altamira Gris 440 x 660 11 23.7 112 V5620200
Block Altamira Gris 109 x 660 10 23.3 115 V5090300
145 x 660 11 23.4 115 V5120300
219 x 660 11 23.2 115 V5210300
Altamira Marfil 440 x 660 11 23.7 112 V5620201
Block Altamira Marfil 109 x 660 10 23.3 115 V5090301
145 x 660 11 23.4 115 V5120301
219 x 660 11 23.2 115 V5210301
Altamira Rojo 440 x 660 11 23.7 112 V5620202
Block Altamira Rojo 109 x 660 10 23.3 115 V5090302
145 x 660 11 23.4 115 V5120302
219 x 660 11 23.2 115 V5210302
Altamira Gris Antislip 440 x 660 11 23.7 113 V5620800
Altamira Rojo Antislip 440 x 660 11 23.7 113 V5620802
Notes
1 Dimensional tolerances: Tested to BS EN ISO 10545-2, size +/– 0.5 mm,
thickness +/– 0.25 mm.
2 Price code refers to price grouping structure. Refer to Porcelanosa for more information.
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 29
floor tiles
www.porcelanosa.co.uk technical and samples hotline t: 08702 240245 May 05 ®
®2.1.17
Staircase pieces
Description Key* Size Thickness Laid wt. Price Product
(mm) (mm) (kg/m2) code code
Huella Altamira Gris a 350 x 440 11 - 141 V7380900
Huella Altamira Marfil a 350 x 440 11 - 141 V7380901
Huella Altamira Rojo a 350 x 440 11 - 141 V7380902
Huella Alt. Gris Antislip a 350 x 440 11 - 141 V7381000
Huella Alt. Rojo Antislip a 350 x 440 11 - 141 V7381002
Huella Esq. RH Altamira Gris b 350 x 454 11 - 142 V7340900
Huella Esq. RH Altamira Marfil b 350 x 454 11 - 142 V7340901
Huella Esq. LH Altamira Rojo b 350 x 454 11 - 142 V7340902
Huella Esq. LH Altamira Gris b 350 x 454 11 - 142 V7340910
Huella Esq. LH Altamira Marfil b 350 x 454 11 - 142 V7340911
Huella Esq. LH Altamira Rojo b 350 x 454 11 - 142 V7340912
Huel. Esq. RH Alt. Gris Ant. b 350 x 454 11 - 142 V7341000
Huel. Esq. RH Alt. Rojo Ant. b 350 x 454 11 - 142 V7341002
Huel. Esq. LH Alt. Gris Ant b 350 x 454 11 - 142 V7341010
Huel. Esq. LH Alt. Rojo Ant. b 350 x 454 11 - 142 V7341012
Zanquin RH Altamira Gris c 100 x 440 11 18.8 130 V7071010
Zanquin RH Altamira Marfil c 100 x 440 11 18.8 130 V7071011
Zanquin RH Altamira Rojo c 100 x 440 11 18.8 130 V7071012
Zanquin LH Altamira Gris c 100 x 440 11 18.8 130 V7071510
Zanquin LH Altamira Marfil c 100 x 440 11 18.8 130 V7071511
Zanquin LH Altamira Rojo c 100 x 440 11 18.8 130 V7071512
Zocalo Altamira Gris d 100 x 440 11 22.8 18 V7070110
Zocalo Altamira Marfil d 100 x 440 11 22.8 18 V7070111
Zocalo Altamira Rojo d 100 x 440 11 22.8 18 V7070112
Peldano Tecn. Altamira Gris f 316 x 660 26 62.7 146 V7490400
Peldano Tecn. Altamira Marfil f 316 x 660 26 62.7 146 V7490401
Peldano Tecn. Altamira Rojo f 316 x 660 26 62.7 146 V7490402
altamira, altamira multiblock and altamira antislip
a
bc
d
e
f
d
Main tile
Notes
1 Tolerances: Tested to BS EN ISO 10545-2, size +/– 0.16
to 0.30%, thickness +/– 4%.
2 Price code refers to price gouping structure. Refer to
Porcelanosa for more information.
3 Staircases may also use Zocalo pieces (d).
4 Risers are cut from main tiles (e).
*Key to stair pieces
450.1 Stonker floor tiles cont2 12/4/05 3:13 pm Page 30